Justice epaulettes Senior officers

UPC: 6522010
Нет в наличии
The Ministry of internal Affairs
The Ministry of internal Affairs
The Company
The Company "Alloy"
70 р. 70
   
Office
The Ministry of internal Affairs The Ministry of internal Affairs
Министерство внутренних дел Российской Федерации
Министерство внутренних дел Российской Федерации (МВД России) — федеральный орган исполнительной власти, осуществляющий функции по реализации государственной политики и нормативно-правовому регулированию в сфере внутренних дел, в сфере контроля за оборотом наркотических средств, психотропных веществ и их прекурсоров, а также в сфере миграции.
Guidelines for wearing the shape of the interior Ministry
GUIDELINES For wearing uniforms by the employees of internal Affairs bodies Russian Federation 1. Shaped police, internal service and justice is worn in accordance with these guidelines on wearing of uniforms by police officers. 2. Shaped police, internal service and justice is divided into output, daily and for bearing outer service, and the seasons in addition to summer and winter.
Order No. 575 (amended on 20 July 2015)
About approval of Rules of carrying employees of bodies of internal Affairs of the Russian Federation uniforms, insignia and departmental insignia (amended on 20 July 2015) THE MINISTRY OF INTERNAL AFFAIRS OF THE RUSSIAN FEDERATION ORDER July 26, 2013 # 575 About approval of Rules of carrying employees of bodies of internal Affairs of the Russian Federation uniforms, insignia and departmental insignia (amended on July 20, 2015) ____________________________________________________________________ Document changes made: by order of the Ministry of internal Affairs of Russia from July 20, 2015 N 771 (Official Internet-portal of legal information www.pravo.gov.ru, 20.08.2015, N 0001201508200016).
The rules of wearing uniforms of the interior Ministry
outlet Summer dress For persons of commanding and ordinary structure of organs of internal Affairs with special ranks of police, internal service and justice dress code for men the wool Cap steel output color; - wool color steel output; - wool dark blue; - white; - tie in dark blue with tack Golden color.
The table of ranks of the Russian Federation
Federal public service - professional office activity of citizens on the enforcement powers of the Russian Federation, and also powers of Federal public authorities and persons holding public office of the Russian Federation. In accordance with the Federal law No.
Знаки отличия и награды на форме МВД РФ
Рекомендации по ношению государственных наград и ведомственных знаков отличия сотрудниками органов внутренних дел Российской Федерации на предметах форменной одежды I. Общие положения 1. Ношение государственных наград Российской Федерации, СССР, ведомственных знаков отличия сотрудников органов внутренних дел Российской Федерации 1 (медалей и нагрудных знаков МВД России), наград других федеральных органов исполнительной власти, наград иностранных государств 2 , осуществляется в соответствии с требованиями Положения о государственных наградах Российской Федерации, нормативных правовых актов Российской Федерации и СССР, РСФСР в области государственной наградной политики, нормативных правовых актов МВД России, нормативных правовых актов федеральных органов исполнительной власти, нормативных правовых актов иностранных государств и настоящих рекомендаций.
Как пришить шевроны, нашивки, погоны на форму полиции
Для начала разберёмся с погонами. Погоны старого образца выглядели вот так: А нового выглядят так: Согласно Приказу Министерства внутренних дел Российской Федерации от 26 июля 2013 г. N 575 г. Москва «Об утверждении Правил ношения сотрудниками органов внутренних дел Российской Федерации форменной одежды, знаков различия и ведомственных знаков отличия», звёзды (лычки), а также петличные эмблемы размещаются в зависимости от звания сотрудника (все изображения кликабельны): Полный текст данного приказа можно посмотреть здесь На примере капитанских погон всё будет выглядеть так: Как пришить шевроны Теперь перейдём к шевронам, которые пришиваются как и раньше на рукава кителя, куртки п/ш, зимней куртки или бушлата, а теперь ещё и на рукава рубашки (как с длинным, так и с коротким рукавом; сами же шевроны голубого или белого цвета).
Награды и поощрения МВД РФ
Награждение ведомственными знаками отличия МВД России производится в соответствии с приказом МВД России от 31 октября 2012 года № 989 «О ведомственных знаках отличия Министерства внутренних дел Российской Федерации». В систему ведомственных наград входят: Нагрудный знак МВД России «Почетный сотрудник МВД» Нагрудный знак МВД России «Почетный сотрудник МВД» является высшим ведомственным знаком отличия МВД России.
Награды Министерства внутренних дел РФ
Изображение награды Название Дата учреждения Примечания Медаль «За доблесть в службе» 24 января 2001 Медаль «И.Д.
Отличие новой формы полиции
В соответствии с Постановлением Правительства № 835, в конце 2011 года для сотрудников МВД была утверждена форма полиции нового образца. Необходимость этого шага обусловлена тем, что старая форма одежды полностью устарела, утратив соответствие требованиям современности.
Порядок ношения государственных наград в РФ
Порядок ношения государственных наград регулируется «Положением о государственных наградах Российской Федерации» (утверждено Указом Президента РФ от 7 сентября 2010 г. № 1099 «О мерах по совершенствованию государственной наградной системы Российской Федерации»).
Постановление N 835 от 13.10.2011 О форме МВД РФ
О форменной одежде, знаках различия и нормах снабжения вещевым имуществом сотрудников органов внутренних дел Российской Федерации (с изменениями на 8 августа 2015 года) ПРАВИТЕЛЬСТВО РОССИЙСКОЙ ФЕДЕРАЦИИ ПОСТАНОВЛЕНИЕ от 13 октября 2011 года N 835 О форменной одежде, знаках различия и нормах снабжения вещевым имуществом сотрудников органов внутренних дел Российской Федерации (с изменениями на 8 августа 2015 года) ____________________________________________________________________ Документ с изменениями, внесенными: постановлением Правительства Российской Федерации от 26 февраля 2013 года N 152(Собрание законодательства Российской Федерации, N 9, 04.03.2013); постановлением Правительства Российской Федерации от 3 ноября 2014 года N 1147(Официальный интернет-портал правовой информации www.pravo.gov.ru, 10.11.2014, N 0001201411100006); постановлением Правительства Российской Федерации от 8 августа 2015 года N 819(Официальный интернет-портал правовой информации www.pravo.gov.ru, 12.08.2015, N 0001201508120011).
Приказ МВД РФ от 8.11.2006 О форме ФГУП Охрана
МИНИСТЕРСТВО ВНУТРЕННИХ ДЕЛ РФ ПРИКАЗ № 897 от 08 ноября 2006 г. Об утверждении формы одежды, знаков различия и норм снабжения вещевым имуществом работников военизированных и сторожевых подразделений ФГУП «Охрана» МВД России (в редакции приказа МВД России от 27 марта 2008 года № 283) В целях реализации постановления Правительства Российской Федерации от 11 февраля 2005 г.
Присвоение специальных званий МВД РФ
Присвоение специальных званий МВД РФ
Федеральным законом от 30 ноября 2011 г. № 342-ФЗ «О службе в органах внутренних дел Российской Федерации и внесении изменений в отдельные законодательные акты Российской Федерации» (далее – Закон о службе) учреждены следующие специальные звания и установлены следующие сроки выслуги в них : Первые и очередные специальные звания Первые специальные звания, соответствующие должностям среднего и старшего начальствующего состава, а также очередные специальные звания полковника полиции (внутренней службы, юстиции) присваиваются Министром внутренних дел Российской Федерации.
Символика (флаги, эмблемы, нашивки) МВД РФ
Знамя Министерства внутренних дел (МВД) России Дата принятия: 12.07.2012 Знамя состоит из двустороннего полотнища, древка, навершия, скобы, подтока и знаменных гвоздей. В комплект со знаменем могут также входить панталер и знаменный чехол.
Специальные звания органов внутренних дел РФ
Специальные звания органов внутренних дел Российской Федерации — специальные звания, присваиваемые сотрудникам органов внутренних дел, учреждений, организаций, учебных заведений МВД России, проходящим службу на должностях, на которых предусмотрено присвоение специальных званий.
Униформа ФГУП Охрана МВД РФ
Для обеспечения достаточно степени комфорта при носке качественная форма одежды сотрудников ФГУП охраны МВД России разрабатывается с учетом соблюдения следующих требований: Безопасности и удобства. Долговечности. Качественного пошива.
Форма МВД — обзор старого и нового образца
В каждой серьезной организации обязательно имеет место быть дресс-код. Одежда, выполненная в деловом стиле, или проще – специальная униформа. В первую очередь ассоциативно в голову приходит мысль о полиции, а потом уже об армии России. Ношение формы МВД– это не только обязанность, это визитная карточка каждого сотрудника внутренних войск МВД России.
Форменные фуражки МВД 1994-2016 гг
Форменные фуражки МВД 1994-2016 гг
ФОРМЕННЫЕ ФУРАЖКИ СОТРУДНИКОВ ОРГАНОВ ВНУТРЕННИХ ДЕЛ РФ, ИМЕЮЩИХ СПЕЦИАЛЬНЫЕ ЗВАНИЯ МИЛИЦИИ 1994-2000 Г.Г. Форменная одежда для лиц начальствующего и рядового состава органов внутренних дел Российской Федерации, имеющих специальные звания милиции была утверждена Постановлением Правительства РФ от 03.05.1994 г.
Эмблемы подразделений центрального аппарата МВД РФ
ГУОООП МВД России Официальная эмблема Главного управления на транспорте МВД России Организационно-аналитический департамент МВД России ФЭД МВД России ГУПЭ МВД России УБКМ МВД России УПСНиА МВД России ДГСК МВД России ДПД МВД России КРУ МВД России Следственный департамент МВД России Эмблема Управления организации дознания МВД России Официальная эмблема Департамента информационных технологий, связи и защиты информации Официальная эмблема ГУСБ МВД России Официальная эмблема ГУЭБиПК МВД России НЦБ Интерпола МВД России ГУВО МВД России Департамент Тыла МВД России ДДО МВД России ВИПК МВД России Академия управления МВД России Официальная эмблема Управления по взаимодействию с институтами гражданского общества и средствами массовой информации (УОС) МВД России ЦСН ОБДД МВД России Официальная эмблема Оперативного управления МВД России.
The Ministry of justice The Ministry of justice
Guidelines for wearing the shape of the interior Ministry
GUIDELINES For wearing uniforms by the employees of internal Affairs bodies Russian Federation 1. Shaped police, internal service and justice is worn in accordance with these guidelines on wearing of uniforms by police officers. 2. Shaped police, internal service and justice is divided into output, daily and for bearing outer service, and the seasons in addition to summer and winter.
Order No. 575 (amended on 20 July 2015)
About approval of Rules of carrying employees of bodies of internal Affairs of the Russian Federation uniforms, insignia and departmental insignia (amended on 20 July 2015) THE MINISTRY OF INTERNAL AFFAIRS OF THE RUSSIAN FEDERATION ORDER July 26, 2013 # 575 About approval of Rules of carrying employees of bodies of internal Affairs of the Russian Federation uniforms, insignia and departmental insignia (amended on July 20, 2015) ____________________________________________________________________ Document changes made: by order of the Ministry of internal Affairs of Russia from July 20, 2015 N 771 (Official Internet-portal of legal information www.pravo.gov.ru, 20.08.2015, N 0001201508200016).
The table of ranks of the Russian Federation
Federal public service - professional office activity of citizens on the enforcement powers of the Russian Federation, and also powers of Federal public authorities and persons holding public office of the Russian Federation. In accordance with the Federal law No.
Министерство юстиции Российской Федерации
Министерство юстиции Российской Федерации (Минюст России) — федеральный орган исполнительной власти, осуществляющий выработку государственной политики (государственное управление) и нормативно-правовое регулирование в сфере юстиции, а также координирующее деятельность в этой сфере иных федеральных органов исполнительной власти.
Эмблема Министерства юстиции
Эмблема (герб) Министерства юстиции РФ: по окружности расположен венок из лавровых веток, перевитый в верхней и нижней его части лентой. В центре - фигура двуглавого орла с поднятыми вверх крыльями, увенчанного одной большой и двумя малыми коронами. В правой лапе орла - скипетр, в левой - держава.
Type of equipment
Shoulder straps Shoulder straps
Shoulder straps
shoulder Straps — shoulder insignia military rank, position, affiliation to a Ministry, Department, organization p. on her uniform. Are used in many modern Armed forces, the police and other paramilitary forces, including Russian. An alternative is placement of insignia on the collar (of his coat), sleeve (sleeve marks) p.
The value of stars on the shoulder straps
As in Soviet times and now are on the shoulder straps and stripes(now curved)and sprockets, but the values remained the same. so let's start with the lower ranks Clean - private. One stripe corporal. Two stripes - corporal. Three stripes – Sergeant.
Воинские звания военнослужащих Военно-воздушных сил
Р
Воинские звания военнослужащих Военно-морского флота
М
История погон
В отечественной литературе господствует глубоко ошибочное мнение, что погоны как элемент военной униформы якобы ведут свое происхождение от мифических металлических наплечников, защищавших плечи воина от сабельных ударов. Однако это просто красивая легенда, не имеющая под собой сколько-нибудь серьезного обоснования. Погон, причем один (!) появился на русской военной одежде только с созданием царем Петром I регулярной армии между 1683 и 1699 годами как чисто практический элемент одежды.
О происхождении и сути погон
Каждый элемент военной формы имеет определенное предназначение и появляется на ней не случайно, а под воздействием определенных условий, в том числе и исторических. Можно сказать, что каждый элемент формы несет на себе как историческую нагрузку, так и утилитарное назначение. Широко распространено заблуждение, что погоны как элемент военной формы происходят от рыцарских лат, точнее металлических наплечных пластинок, защищавших плечи воина от сабельных ударов.
Погоны на полевой форме одежды
Р

THE COMPANY "ALLOY"

The history of education "ALLOY" has its roots in the Soviet Union, when six of the seven founders of the Company was seriously engaged in boating, and our industry has yet produced no trial, no equipment suitable for circulation on mountain rivers. Sewing catamarans, life jackets, wetsuits and Hiking pads to be had on old "Zinger"-ovsky cars (only these cars could take materials of any thickness and texture). Tourists-water-transport workers themselves made of a frame and oars, I glued the cylinders catamarans or rafts and containers for lifejackets. Therefore, in times of restructuring, the Company's founders started to do what few people knew how to do – sew catamarans. Respectively, and the production company was originally called "alloy Funds", and on 27 October 1992 and was formally launched the Company "fusion".

In parallel, the leaders of the Company searched for new areas of industrial activity, as the vast majority of the population in the 90-ies was not to tourism.

The company "fusion" started to produce and successfully produces still uniform, special, camouflage clothing, shoes, equipment and related products for security, military and police (now police) structures. When developing new models, the design Department of the Company relies on the professional experience of special forces, takes into account the needs and specificities of different services and combat arms.

Produced special has been repeatedly tested in combat conditions in different climatic zones.

In addition, since 1993 the Company "fusion" produces a wide range of frame tent constructions of PVC-materials.

Some time ago, the Company again turned to face his firstborn, and began to develop a tourist destination.

Today, by using the best modern materials and technologies, a powerful model design office and test laboratories, steadily increasing functionality and quality of products for tourism, extreme sports and recreation. Goods of this class with the brand the Company "the ALLOY" becomes visible and in demand not only in our country but also abroad.

Garment production in Moscow, Tver and Novozybkov provide products to brand stores in major Russian cities, as well as our partners in Russia and countries near and far abroad.

In addition, the Company is the official representative in Russia of such world recognized brands like Trek n Eat®, Alpha Industries®, 5.11 Tactical Series®, BLACKHAWK®, PROPPER®, Lowa®, Mechanix Wear®, Cove®, EXPLORER Cases®, MAXPEDITION®, CARINTHIA®, Hatch®, HAZARD 4®/Civilian Lab, ATWOODROPE® Swiss+tech® and others.

We will be glad to any your reviews, photos, impressions purchased, questions and suggestions. This will help to avoid errors in the subsequent developments, and, if possible, to eliminate defects, if they occur in serial production.

Production Company "the ALLOY" will allow you to feel confident and comfortable in the service, work and recreation. Multiply high quality on reliability and functionality, share on loyal to the price, and you will receive a confidence factor to our Company.

The police are an integral part of the unified centralized system of the Ministry of internal Affairs of the Russian Federation. Included in the bodies of internal Affairs. (PT. 4 of the Ministry of internal Affairs of the Russian Federation, approved. By the decree of the President of the Russian Federation from 01.03.2011 № 248 "Issues of the Ministry of internal Affairs of the Russian Federation")

The police is intended for protection of life, health, rights and freedoms of citizens of the Russian Federation, foreign citizens, persons without citizenship; to combat crime, protect public order, property and ensuring public safety.

XVI century

In 1504, were installed in Moscow slingshot, at which there were guards. The guard was kept by the locals. The city was divided into areas, between which there is a gate with bars. It was forbidden to move a night on the town, or without lighting. Great Prince Ioann Vasilyevich established the trips to Moscow for safety.

The law Ivan IV gave the case of a "slave thieves" under the jurisdiction of the labial elders. Before that These certificates were in the nature of awards, and was given by celebitiy the population. Lip diploma gave permission to the local society to self-manage in the field Lipstick case. In the cities the police functions were performed by the town entered instead of ognischans.

Armed with the order first mentioned in 1571 and since then has continuously existed before the eighteenth century. With 1539 in written sources mentioned in the Moscow boyars, who ordered robbery case. Nevolin believes that this was a temporary Commission established for the destruction of robberies, which then increased. But as the robberies did not stop, the ad-hoc Committee turned into a permanent and thus was the house robbery, or assault order.

XVII century

By decree of 14 August 1687 was the year of the rogue orders were passed Zemsky orders. Alexis in April 1649 he issued the Order to city deanery concerning. According to the instructions in the White city team was created under the leadership of Ivan Novikov and the Scrivener Wisely Panova. They were committed to five lattice "Pryamikov" (i.e. salesmen) and "one person with 10 yards" with spears, axes and vocalissimo pipes. The squad watched fire safety and procedure.

Police Ministers in major cities called the provincial arieki. District areski (according to the rules of modern orthography — arezki) in Moscow dressed in clothes of red and green. In other cities the color of the clothes could be different. On the chest they had sewn the letters "W" and "I". In 1669 instead of the Labial elders and Labial Tselovalnikov were everywhere introduced the detectives.

XVIII century

7 June 1718 when Peter the great established St. Petersburg Main police. General of police was appointed adjutant General of Devier. Initially, the state police consisted of a Deputy General of police, 4 officers and 36 of the lower ranks. Records management in the Chief police office of the clerk and led the ten of clerks. The police not only kept order in the city, but also implemented a number of economic functions, was engaged in the improvement of the city — paving of streets, drainage of swampy places, refuse collection and so on p. Through the efforts of Devara in 1721, in St. Petersburg were placed first , and benches. Was organized by the fire Department. In addition, the police had the authority of the court and had the opportunity to impose penalties in criminal cases.

January 19, 1722, was established in Moscow headed by the chief of police. On 10 December 1722 was published Police manual, consisting of 40 points. Since 1775, (after "Establishments for management of provinces of the Russian Empire") Gorodnichy began to appoint the Senate.

XIX century

In 1862, was a reform of the police. The title of mayor was abolished; gorodnichanka of the Board in those cities, which were subordinated to district police, were attached to the Zemstvo courts, renamed to County police departments and in those cities that have retained its separate from the County, the police, they have been renamed to urban police departments.

In 1866, the St. Petersburg chief of politzmeister F. F. TREPOV, Alexander II sent a note, which stated: "A significant gap in the establishment of the Metropolitan police was the absence of a special piece with the special purpose of production studies for solving crimes, finding common measures for the prevention and suppression of crime. These duties lay on the outer ranks of the police, which, carrying the whole burden of the police service had neither the funds nor the ability to act successfully in a given ratio. To address this deficiency and proposed to establish a police detective".

For the first time in the Russian police, specialized units for solving crimes and conducting inquiries were established in St. Petersburg, where in 1866 was an established detective in the office of the chief of police. To detective this activity was carried out by forensic investigators and the police in the form in which it existed at the time. Initially, the staff of the criminal investigation of St. Petersburg was not large, the Department consisted of the chief except his assistant, 4th official for special assignments, 12 police officers (detectives) and 20 civilian investigators (employees, having a civilian rank). The first head of the St. Petersburg police detective 31 December 1866 he was appointed titular counselor Ivan poutilin. Eventually, similar units were established in police Department of Moscow and other cities. So there was service of the criminal investigation. By 1907 they were in Moscow, Kiev, Riga, Odessa, Tiflis, Baku, Rostov-on-don and other large cities.

The twentieth century

August 9, 1910, the Minister of home Affairs P. A. Stolypin issued an instruction reasons detective offices that determined their objectives and structure. Every detective Department consisted of four departments-the tables:

  • personal arrest
  • search
  • observation
  • reference in the registration Bureau.

By order of P. A. Stolypin, when the police Department has established special courses for training of detective commanders offices. After the February revolution the Provisional Government decree of 10 March 1917 the police Department was abolished. One of Lenin's "April theses" to the report "On the tasks of the proletariat in this revolution" of 4 April had the task of "eliminating the police, army, bureaucracy".

Decrees of the Provisional Government "On approval of the police" and "Provisional regulations of police", published on April 17, 1917 established the "people's militia". National militia declared the Executive body of state power, "consisting in direct jurisdiction of the provincial and municipal public administrations".

Simultaneously with the state "people's militia" the Soviets of workers ' deputies organized groups of "working police" and other armed formations, which were under the influence of various political forces, and sometimes outside of them. Working with the police was not subordinate to the commissioners of the city militia. Formed on 3 June under the auspices of the Bolsheviks, the Petrograd Council of the people's militia came into conflict with the chief of city militia, putting political slogans in connection with the refusal to pay extra for service in the workers ' militia the workers who receive full salary in factories. Destroyed the most important state structure. The principle of self-organization of the forces of law and order was implemented by the Bolshevik party some time after October of 1917. In the decree of the NKVD "On working police" of 28 October (10 November new style) 1917 was not intended organisational form of the state police apparatus. Army and eliminated, and their functions passed to armed people.

Working the police had the character of mass Amateur organizations, were formed on the basis of volunteer teams and therefore could not stop the rampant crime.

May 10, 1918, the Collegium of the NKVD passed a resolution: "The police exist as a permanent state of persons performing special duties, the organization of the militia should be independent of the red Army, their functions should be strictly segregated".
The police in modern Russia

January 21, 2010 at the meeting of the Association of lawyers of Russia with the participation of President R. Nurgalieva S. Stepashin said, without disclosing the nature of the innovations: "Public security police, as far as I know it will be no more. And probably, creation of professional police is a decision absolutely correct". but this time the authorities were given to understand that seriously intend to bring reform to the end, and decided to attach to the drafting of the law of ordinary citizens. 6 August 2010 the President of Russia Dmitry Medvedev at meeting on reforming the Ministry of internal Affairs invited the next day to give the bill "About police" for public discussion in the Internet. Then, on 6 August 2010, Dmitry Medvedev has suggested to rename militia to police. Thus, on 7 August 2010 proposed a new draft law "On police" (the same bill to change the name "militia" on "police").

Overall, the new bill is a continuation of the policy, return that which was carried out in the 2002 reform, there is more centralization. Abolished the institutions of the public security police and criminal police. Unlike the police, partially subordinate authorities of the subject of Federation, the police Federation subject (the bill) is not connected.
Unique for Russia the online discussion of the draft law "On police" was attended by about 5 million people. As a result, the bill, compared with the original appearance, has undergone significant changes related to the powers of the new structure. In particular, they denied that the police can freely enter the premises of citizens, on their own land in the territory, land and premises occupied by voluntary associations and organizations, as well as causing most criticism of the "presumption of lawfulness" of the police ("the requirements of a police officer, addressed to citizens and officials, and its actions are considered legitimate as long, while in the prescribed manner and not otherwise"), while according to opposition politicians the wording was only veiled, and not excluded.

Despite criticism from certain sectors of society and some opposition political parties, the bill was passed in its first reading on 10 December 2010. The state Duma on Friday, January 28, 2011 adopted the bill "On police" in the final third reading. The adoption of the law was supported only by United Russia. 315 deputies voted for the law, 130 opposed, no abstentions.
Originally it was planned that the new law will come into force from January 2011, but officially the police in Russia has been revived March 1, 2011

On our site you can buy inexpensive form of police officer, patrol and internal Affairs.

We offer the form of the old sample and new sample form. Also, on sale are police epaulettes, police badges, jackets and costumes of the police.

Стоимость доставки по Москве в пределах МКАД: 300 рублей, в случае отказа от привезённого Вам товара, оплачивается только услуга вызова курьера.

Кроме того, заказы, стоимостью до 300 рублей не доставляются по Москве - в Москве для них доступен только самовывоз.

Заказы, сделанные до 13.00, как правило, доставляются через день. Заказы, сделанные после 13.00, доставляются через два дня.

После оформления заказа в нашем Интернет-магазине, мы свяжемся с Вами и уточним наличие товара и время доставки.

Также доступна услуга самовывоза товара из нашего офиса в Москве. Адрес офиса самовывоза - Москва, м. Достоевская,  Институтский переулок, дом 2/1. Для этого в форме расчет доставки выберите пункт выдачи "Институтский пер., 2/1".

Обратите внимание, что мы не храним остатки в офисе и товар должен быть заказан заранее.

По России стоимость и сроки доставки рассчитываются индивидуально в автоматическом режиме, в зависимости от выбранного способа доставки, веса груза и тарифов транспортной компании.

Стоимость доставки по России - от 200 рублей.

Для того, чтобы обеспечить быструю и дешевую доставку в регионы, мы работаем с компаниями DPD, Pickpoint, SPSR, Hermes и Почтой России через интерфейс компании Checkout.ru.

Услуги транспортной компании оплачивает покупатель при получении товара.

Обратите внимание - при доставке специализированного товара мы попросим предъявить соответствующие удостоверения.

Крупногабаритные товары (тенты, шатры, елки и прочее) пересылаются только по предоплате 100% стоимости товара + тарифа транспортной компании.

Ask a question
Substitutes
Others from department
The Ministry of internal Affairs
The Ministry of internal Affairs 708 products, 172 reviews, 28 videos
Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed wearing summer without a handkerchief in the back office. The length of the lower edge must be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample
Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed to wear summer dresses without a handkerchief in the back office. Dress length at the bottom edge should be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample.
The tunic is part of our daily and weekend uniforms of police officers of the new model. Worn with trousers. Material: Suiting (wool blend) fabric. Composition: 75% wool, 25% 280 g/m2 Lining: Twill 100% 105% g/m2. Adjacent cut, single breasted, fastened with four buttons. Turn-down collar with lapels. Shelves with cut barrels. Horizontal Welt side pockets in the "frame" with the valves. Back with a Central seam, in the lower part there is a slot. Vtachnoy sleeve, double seam. Jacket with leather sleeves. The left side of the lining is the inside pocket with "leaflets". Is designed for employees of internal Affairs authorities with special ranks of police, and also for the cadets (listeners) of educational institution of higher professional education of Russia. Has red trim on the sleeves. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. In addition, at this sewed epaulettes with buttons, and reinforced two lapel badges. How to sew a shoulder strap? To do this, except for the jacket and a shoulder strap, you will need a ruler, scissors, needle, thimble and strong thread red. Be sure to wear a thimble, even if you are used to sew without it, because sometimes through the needle passes with great difficulty, and could injure your fingers. If you have difficulty pulling the needle and thread from the shoulder strap, you can use the pliers or tweezers. 1) First, prepare the shoulder straps, E. attach all required insignia, as to do it on the already sewn the race will be much harder. 2) Take a shoulder strap and have it so that the side, remote from the closure, was in the fence to the seam that joins the shoulder of his tunic sleeve. At the same time, top aimed toward the back, the edge of the chase got 1 cm to go on top of the seam running along the shoulder. In other words, the shoulder straps should be slightly shifted forward. 3) Pass the needle and thread secure the shoulder straps to the jacket at three points: at the corners of the chase, at the place where he comes into contact with the sleeve seam and in the center of a semicircular cut. Now the shoulder straps will be secured and will not shift from the correct position in the process of sewing. 4) Then very carefully sew the shoulder straps around the perimeter, making the stitches so that on its surface could only barely visible dots at the places where the needle enters the ring, and the thread between two adjacent holes were mostly on the wrong side (the lining) jacket. Then the thread will not be noticeable even if it the color does not quite match the color of the shoulder straps. The optimal length of each stitch should be about 1 cm. 5) With the second shoulder strap follow the same pattern. How to strengthen the lapel badges? On the collar of his jacket is on the bisector (the line that divides the angle of the collar in half), at a distance of 25 mm from the corner of the collar to the center of the logo, the vertical axis of symmetry of the logo should be parallel to the departure of the collar. How to place awards on the police uniform? On the left side of the chest awards are in the following order: A special sign of distinction are arranged so that the upper edge pads the medals was at the level of the ledge of the lapel of his tunic and jacket. When wearing two or more special characters differences, they are separated in one row, from right to left at intervals of 10 mm between the side ends of the stars in the order listed. A special sign of distinction of one denomination are placed in the order of their awarding. Signs of orders, decorations and medals are laid out horizontally in a row from the center of the chest to the edge, from top to bottom in the order listed. When wearing two or more orders or medals of their pads together in a row on the common plank. Medals that does not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in the above order. Pads orders and medals of the second row should go under orders and medals of the first row, the upper edge of the Shoe bottom row is placed at 35 mm below the pads of the first row. Subsequent rows are arranged in a similar manner. Signs of orders, decorations and medals are on the jacket single breasted police so that the top edge of pads of the orders and medals of the first row located below the level of the ledge of the lapel on 90 mm. On the right side of the chest awards are in the following order: Order are arranged left to right in the order listed. The upper edge of the maximum size of the order of the first row are arranged at the level set for overall straps (pads) of the first row of orders and medals placed on the left side of the chest. Orders that do not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in order. The centers of orders in a series must be at the same level. The distance between the orders and ranks of the order of 10 mm. The sign of the number of injuries from lace Golden color (if severe injury) or dark red (light wound), you'll be on the strip of fabric top products. Width of braid 6 mm, length 43 mm. Stripe of the critically injured is located below the stripe on minor injuries. The distance between stripes of 3 mm. The sign of the number of wounds placed on the tunic and jacket to the right of the sign to honorary titles of the Russian Federation, and in his absence, in his place.
Material: -Classic pants with piping on side seam. -The volume of the belt is regulated by side panels with elastic braid. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging red
The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon
The jacket is cropped, straight leg. Fabric - gabardine. Is designed for employees of internal Affairs authorities with special ranks of police. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. Front zip detachable "zip". Turn-down collar. Shelves with cutting coquettish in the area of the shoulder girdle. On the shelves are chest Welt pockets with scalloped flaps buttoned. Two side Welt pockets in frame with the entry for "lightning". With a stitched back yoke. Basque line laid soft pleats for freedom of movement. Single-seam set-in sleeves with stitched cuffs, fastened with buttons. On the bottom – cap zone, the volume of which is adjustable by side panels with elastic braid. The back and shelf on the lining from knitted fabric (mesh). The armhole is edged with edging tape Straight cut pants. Stitched waistband with six belt loops under the belt. Volume the waistband is adjustable by side panels with elastic braid. Two pockets in the side seams. One Welt pocket with flap with internal zip closure is located on the right rear half of the pants. Along the side seams of trousers inserted edging of red. Is part of the uniform of a police officer of the new sample.
All-season jacket for the police. The jacket is extra long, straight cut with a combined (stitched and removable) insulated lining, removable insulated hood, removable faux fur collar.Central two-way zip detachable "zip" tetrasodium closed valve on the buttons.Turn-down collar.In the shoulder seams – shoulder straps with buttons with removable fullpagename for attaching insignia.In the area of the shoulder girdle Basque, Basque line TACAN edging of red.Two chest patch pockets with flaps on buttons and textile fasteners "vel'kro". Vertical side pockets – pleat for volume.At the bottom of the side seams – sections fastened to the "zipper".Back with Basque, Basque line TACAN edging of red.Set-in sleeves double-seam. On the right sleeve – patch pocket with vertical zipper. Inside pocket sewn headband with reflective tape, fastened with the Velcro fastener "vel'kro".On the left shelf under wind flap – inside pocket under the gun with vertical textile fastener. Inside pocket sewn cord with carabiner for attachment of the gun.Stitched insulated lining with insulation "Fiberteck-200".On the left shelf on the closure – chest patch pocket with vertical zipper. On the right and left through – two pockets with horizontal entry for "lightning".Waist lined – slide with a perforated elastic band to adjust the volume. The free end of the braid is fastened on a button.Removable insulated hood with fleece lining fastened on the separable zipper. The volume of the hood to the neck are regulated by Patou on a textile fastener. Volume on the front adjustable neck cord with clamps. The chin part of the hood fastens to the Velcro fastener "vel'kro".Detachable collar of faux fur fiber "Kanecaron" made in Japan, is fastened to a detachable zipper and loop and button closure buttons View all products from the category Buttons on podvorotnya. The collar is fastened on the Pat with Velcro fastener.Removable insulated lining with sleeves with knitted cuffs – wristbands fastened in a detachable zipper loops and buttons at the shoulder seams and bottom sleeves. On the shelf is right side patch pocket with a horizontal entrance on "lightning". On the underside of the wings with cord to control the volume, on the ends of the cord - clamps and ferrules. INSULATION FIBERTECK - Keeps its shape and restores it after washing. - Allowed multiple washing and drying. - Provides greater heat-shielding effect compared with other materials of similar thickness and density. - Humidity resistant. - Sustainable in the long run.
The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon
The skirt is shaped for the employees of internal Affairs bodies. Summer option out of lightweight fabrics gabardine. Is a part of everyday forms of employees of internal Affairs bodies. According to the order No. 575, the length of the skirt on the bottom edge should be at knee level.
The skirt is shaped for the employees of internal Affairs bodies. The traditional version from a wool blend fabric. According to the order No. 575, the length of the skirt on the bottom edge should be at knee level. Is part of the daily and weekend uniforms of employees of internal Affairs bodies.
Jacket combined(stitched and removable) insulated lining, removable insulated hood, removable faux fur collar. The jacket is cropped, straight leg. Front zip detachable two-way zipper, closed windproof flap with buttons. Collar turn-down with snap closure-patoy on a textile fastener. In the shoulder seams are on the buttons with removable fullpagename for attaching insignia. Shelves and back with flirt. On line coquettes – edging of red. Two chest pockets with flaps with buttons and textile fasteners "vel'kro". Two side pockets with flaps on buttons and textile fasteners "vel'kro". The burlap patch pockets Welt pockets at "lightning". At the bottom of the cutting zone, the volume of which is adjustable by side panels with elastic tape stitched on multi-needle spec. machine with chain stitch. Vtachnoy sleeve, double seam. On the right sleeve Welt pocket on "lightning". Inside pocket sewn headband with reflective tape, fastened with the Velcro fastener "vel'kro". On bottom of sleeves stitched cuffs with elastic tape stitched on multi-needle spec. machine with chain stitch. Stitched insulated lining with insulation "Fiberteck-200" on the inner side of the left shelves is under the gun pocket ( with a carabiner on the cord to fasten the gun ), and patch pocket with vertical zipper. Removable insulated hood detachable fastened on zipper. The volume is adjustable on the back of the neck and face. The chin part fastens with the Velcro fastener "vel'kro". Detachable collar made of artificial fur that contains fiber "Kanecaron" (Production Japan) is fastened on the separable zipper. Removable insulated lining (vest) of insulation "Fiberteck 150" quilted on both sides with lining fabric, detachable snap-on "lightning". Removable insulation is patch pocket with a horizontal entrance on "lightning". Fiberteck insulation has several advantages over traditional fillers:- Keeps its shape and restores it after washing. - Allowed multiple washing and drying. - Provides greater heat-shielding effect compared with other materials of similar thickness and density. - Humidity resistant. - Sustainable in the long run. - Is environmentally friendly and non-toxic insulation. - Practical in terms of price and quality.
Material: the wool -Classic pants with piping on side seam. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging red
Without Velcro under the chevrons. The size is given on the collar. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon
Women's demi-season raincoat is part of the uniform of the police of a new sample. Cloak semiadherent silhouette, with a Central courtyard, a hidden zipper on five loops and buttons and an additional button shaped top and through the loop sewn on stitched insulated lining. On the quaint in the shoulder seam is provided by two belt loops, one slit and not a loop for securing detachable shoulder straps. Vtachnoy sleeve, double seam. In the lower part of the middle seam of the sleeve vacany stalemates, fastened with loop and button shaped. Turn-down collar, with a cutting counter. Removable belt fed through the belt loops located at side seams and fastens with a buckle with a tongue, the free end, which is fed through the belt loops. For the right selection - internal Welt pocket with leaflets. Fabric jackets (100% polyester) with threads of the weave rip-stop and water-repellent impregnation. The second layer of the membrane. Filler: Thinsulate 100 g/m. Recommended temperature range: from +10°C to -12°C. Worn with a neck scarf in dark blue or white scarves. Permitted the wearing of a neatly-folded coat demi nicevoicelady out on the left hand. The demi-season coats are buttoned up. Permitted the wearing of coats demi-season with the upper button unfastened. Coats demi-season wear with removable insulation with or without buttoned buckle belt. This cloak is worn removable shoulder straps dark blue stripe and dark blue.
Consists of and trousers. The fabric is Rip-Stop, PE-67%, CL-33%. Is designed for employees of internal Affairs authorities with special ranks of police, bearing outer service.Worn with a t-shirt in dark blue and dark blue. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. Over the left pocket (shelf), at a distance of 10mm stitched "POLICE" (110х30 mm), made in the form of a rectangle with an edging of red, the inscription is done in white or silver color. On the back, 10 mm above the red line on the back, stitched "POLICE" (275х85 mm), made in the form of a rectangle with red piping and lettering in white or silver. The employees having special ranks of police, when on duty in public areas are on the suit jackets of the summer. The signs are mounted by means of pins to the left chest pocket. Badge is housed in a removable pocket for badge, which is worn on the right side of the chest jackets summer suits in dark blue. Badge is a rectangular card containing the identity of the police officer.
Others from manufacturer
The Company
The Company "Alloy" 8070 products, 799 reviews, 544 videos
Material: 100% Cotton Product weight: 52 R-R – 232 g 54 R-R – 265 g
Jacket in the style of "Retro" Buttons Hood, adjustable oval face Elastic band on waist and bottom of sleeves The bottom adjusts to fit with cord 4 external pockets Material: 100% cotton YOU MAY BE INTERESTED IN: "And often in the evenings, in the evenings, when I feel a sense of comfort, blow suddenly crackling fires from the blue edge of the gas ring stove..." ( B.Vahnjuk) When using home, we buried the face in jackets hanging on a hanger, and breathed in the smell of fire. In stormovik went on any trips at any time of the year. They didn't prokusyvanie mosquitoes, it was not insufflated, does not melt from campfire sparks. Really from freezing, slowly dried up and were too heavy. Now, when there was plenty of light modern canvas jackets real jackets are found quite rarely. But now for the forest fire and it is better not to find. Synthetic fire doesn't like. And if you don't want your favorite fleece was on small (or large) hollow-it's time to think about the tarp. Jacket "Retro" style made of high quality canvas. It is very durable, breathes well. And generally pleasant and loved as songs Vizbora on reel-to-reel recorder. Adjustable oval face hood, stretch sleeves and tightening down jackets protect and wind. Matches, compass, map and other necessary items will easily fit in four voluminous pockets. If you like watching the sunrise on a steep Bank, wander through the summer tundra, to gather cloudberries and cranberries in the bogs, singing evenings around the campfire – this jackets for you.
Seasonality: 3 Number of places: 1 Dimensions and weight: The dimensions of the outer tent, tent (L×W×In): 235×140×100 cm The sleeper dimensions (L×W×In): 235×80/50×100/60 cm Dimensions Packed (L×W×In): 42×14×14 cm Total weight: 1,10 kg Materials: Outer tent: Polyester 75D/190T 3000mm Bottom: Polyester 100D 5000mm Accessories: YKK Versatile, lightweight single-layer with a separate vestibule As stands, you can use a normal rack purchased separately, trekking sticks or improvised material Additional loops on the ridge allow you to install the tent without struts with the help of external supports. For example, between two trees Not only has a spacious sleeping area for one person, but also quite spacious, fully close the vestibule for things All seams taped An air vent on the end ramp and a large ventilation window with mosquito net in the sleeping Department create a good flow-through ventilation Detachable garter straps on the bag makes it easy to fix under a backpack without additional fastening elements. In this case, the tent out from the bag, separating the bag from backpack (prerequisite: must have straps on the bottom for external mounting) Rope guy wires are interwoven reflective thread Racks and pegs not included REVIEWS: Review and discussion on the forum YOU MAY BE INTERESTED IN: General characteristics Purpose: tracking Inner tent: no Number of places: 1 Type of frame: internal Geometry: custom Design The number of inputs / rooms: 1 / 1 Number of vestibules: 1 Ventilation Windows: there Windows: no Interior pockets: no Canopy: no Protection The water resistance of an awning/bottom: 3000 / 5000 mm V.article Sealing joints: taped Wind/snow skirt: no Mosquito net: there UV protection: there Materials The material of an awning: polyester (Taffeta 190T 75D PU) The material of the bottom: polyester (100D 190T Taffeta PU) The material of arches: steel Diameter of arcs: 16 mm Dimensions and weight Dimensions outer tent (LxWxH): 240x140x120 cm Weight: 1.8 kg Additional information: delays have interwoven reflective thread, as stands you can use trekking poles or improvised material, color: khaki, camouflage
The summer trousers in the military style, designed for everyday in a city Lower waist The loops wide waist belt Pleats in the knee area to provide additional freedom of movement The bottom of trousers-adjustable size cord-elastic 9 pockets Material: 75% Cotton 25% Polyester Product weight: 46/176 R-R – 455 g 50/176 R-R – 479 g 54/182 R-R – 499 g 56-58/182 R-R – 533 g SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size Pants "Legion" are a bright representative of the type of military style, in which are placed the convenience and comfort of military clothing. These clothes appreciates the active, sociable people, not recognizing any limits. The urban style of "extreme" real snowboarders and snowboarders in the shower. Prevailing cotton content in the fabric of the pants makes them soft, breathable and very pleasant, while the polyester fibres provide the strength, wear resistance, compensate for the desire of the cotton to shrink after washing. Loose fit with low waist and belt loops for wide belt. Articulated knees are invited to the movement. The abundance of pockets with flaps on the buttons allows you to not only bring everything required, but also to keep things safe. The bottom of the trousers tightened elastic cord. Stylish, lightweight, soft and durable will allow you to feel comfortable in any place, and will become a reliable protection for the city.
Jacket "Mountain 3" recommended for outdoor activities (tourism, Hiking), and also as a form of field infantry units of the defense Ministry Free cutting does not restrict movement The hood is adjustable in three dimensions - on the oval of the face, vertically on the back of the head and adjust the side view Buttons Volume adjustment sleeves above the wrist with a hidden elastic band with Velcro The elbows are protected polyurethane removable insert (included) Pockets: volume two bottom pockets closed by flaps pocket "Napoleon" on the chest slanted pockets on the sleeves, closed by flaps with Velcro internal waterproof pocket for documents with Velcro Laces: at the waist by a cord at the bottom of the rubber cord Material: 100% cotton, new high quality canvas, superior analogs used by most other manufacturers New processing technology has greatly improved the tissue resistance to fading and abrasion The reinforcing plates - 100% rip-stop Attention! Before washing to remove the protective inserts in the knee pads/elbow pads from the respective pockets. Do not wash protective inserts in the washing machine. When washing in a washing machine products from tarpaulin - perhaps the emergence of signs of wear. SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size REVIEWS: Review of Panda Survival For a discussion of this model on the forum YOU MAY BE INTERESTED IN:
Seasonality: 3 Number of places: 2 The number of arcs: 1 Dimensions and weight: The dimensions of the outer tent, tent (L×W×In): 315х160х105 cm The sleeper dimensions (L×W×In): 240х110х95 cm Dimensions Packed (L×W×In): 50х17х13 cm Total weight: 2.2 kg Minimum weight (without cover and pegs): 1.81 kg Materials: Outer tent: Polyester 75D/190T 8000 mm Inner tent: Polyester R/S 68D/210T W/R Bottom: Polyester 100D 10000 mm Arc: Aluminium alloy 7001 T6 Ø8.5 mm Accessories: Duraflex Lightweight versatile scarf for 1-2 people on the same arc Easy to install The awning and can be installed at the same time It is possible to install separately the tent without the inner tent Entrance and ventilation internal duplicated mosquito net The entrance awning in the lower part are fixed with additional hook Storm delays Rope guy wires are interwoven reflective thread Pockets for small items in the inner tent The seams of an awning and bottom taped General characteristics Purpose: extreme Inner tent: there Number of places: 2 Type of frame: external Geometry: custom Design The number of inputs / rooms: 1 / 1 Number of vestibules: 1 Ventilation Windows: there Windows: no Interior pockets: there The number of braces: 2 Storm delays: there Canopy: no Protection The water resistance of an awning/bottom: 8000 / 8000 mm V.article Sealing joints: taped Wind/snow skirt: no Mosquito net: there UV protection: there Reinforced corners: there Materials The material of an awning: polyester (75D/190T PU) The material of the bottom: polyester (100D PU) Inner tent material: polyester (Ripstop 68D/190T WR) The material of arches: alloy aluminium (7001-T6) Diameter of arcs: 8.5 mm Dimensions and weight Dimensions outer tent (LxWxH): 300x160x100 cm Dimensions inner tent (LxWxH): 240x110x90 cm Dimensions Packed (LxWxH): 42x22x18 cm Weight: 2.1 kg Additional information: lightning: YKK, plastic fittings: YKK, color: khaki, camouflage
Seasonality: 3 Number of places: 2 The number of arcs: 1 Dimensions and weight: The dimensions of the outer tent, tent (L×W×In): 315х160х105 cm The sleeper dimensions (L×W×In): 240х110х95 cm Dimensions Packed (L×W×In): 50х17х13 cm Total weight: 2.2 kg Minimum weight (without cover and pegs): 1.81 kg Materials: Outer tent: Polyester 75D/190T 8000 mm Inner tent: Polyester R/S 68D/210T W/R Bottom: Polyester 100D 10000 mm Arc: Aluminium alloy 7001 T6 Ø8.5 mm Accessories: Duraflex Lightweight versatile scarf for 1-2 people on the same arc Easy to install The awning and can be installed at the same time It is possible to install separately the tent without the inner tent Entrance and ventilation internal duplicated mosquito net The entrance awning in the lower part are fixed with additional hook Storm delays Rope guy wires are interwoven reflective thread Pockets for small items in the inner tent The seams of an awning and bottom taped General characteristics Purpose: extreme Inner tent: there Number of places: 2 Type of frame: external Geometry: custom Design The number of inputs / rooms: 1 / 1 Number of vestibules: 1 Ventilation Windows: there Windows: no Interior pockets: there The number of braces: 2 Storm delays: there Canopy: no Protection The water resistance of an awning/bottom: 8000 / 8000 mm V.article Sealing joints: taped Wind/snow skirt: no Mosquito net: there UV protection: there Reinforced corners: there Materials The material of an awning: polyester (75D/190T PU) The material of the bottom: polyester (100D PU) Inner tent material: polyester (Ripstop 68D/190T WR) The material of arches: alloy aluminium (7001-T6) Diameter of arcs: 8.5 mm Dimensions and weight Dimensions outer tent (LxWxH): 300x160x100 cm Dimensions inner tent (LxWxH): 240x110x90 cm Dimensions Packed (LxWxH): 42x22x18 cm Weight: 2.1 kg Additional information: lightning: YKK, plastic fittings: YKK, color: khaki, camouflage
Free cut High stand-up collar Fixed adjustable in terms of volume and facial contours Front pouch pocket located above the waist from the backpack Sleeve cuffs with elastic The tightening at the bottom of the jacket YOU MAY BE INTERESTED IN: Canvas jackets – it's an old love that does not fade with age, in contrast to its material realization. However, faded canvas anoraki and jackets became even dearer and much can tell about its owner, especially if the jacket were read from the endless trail of insurance and dulgerov . Mysterious phrase Igor Sidorov "Bistapan jackets avalanche on the treacherous trail" echoes in the heart "by dragging a sense of the road", the smell of snow and frosty air, memories of some kind of strange friendship and respect for each other. Even in this age of rapid development of outdoor technology, the "forest" people find it difficult to come up with clothes the better. Light, "breathing", not overseasia jackets made of synthetic fabrics, replacing in the mountains, ashamedly retreating at the sight of a hot burning fire. "Anorak-2" made of high quality tarpaulin, which is touched by high technology. It's all the same "thick linen, half-linen or cotton cloth, impregnated waterproof and antiseptic compositions", but it was so light and thin that at first glance it is difficult to understand that before you tarp. However is he with all of this cloth positive qualities. The tarp is extremely breathable, protects from wind and light rain (heavy rain need more protection) or snow. Besides, has such properties as fire resistance, resistance to rot and abrasion, has high strength, high wear resistance. Linen, when wet, swells up, further increasing the strength and water resistant tarpaulin. The disadvantages include the fact that frosted over in the cold, and when wet, becomes very heavy and long dries. "Anorak-2" is a classic loose-fitting with front pocket-kangaroo, which is located above the belt from the backpack. The pocket consists of bulk Department, where do the two side entrance and a small compartment with a secure flap top entry. High stand-up collar coupled with an adjustable height and oval face hood blocks the entry of wind and insects. Protection from wind and cold also contribute to tightening on bottom and gathered at the elastic cuffs of the sleeves. Durable lightweight windproof jacket that is not afraid of sparks from the fire and impenetrable forests and protects and midges. Wear it in good health.
Set of windproof smoke (jackets) and warm with the liner of Primaloft® insulation Black, which can be worn separately as a standalone jacket Smoke: Can be worn with or without podstezhkoy High and wide of the goal. Hood with visor, which is inserted in the plastic to give rigid form. For careful adjustment of the hood has three adjustment Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper Cuffs with Velcro for fine adjustment of the circumference of the wrist Valve front zipper and pockets fastened with canadian (on tape leg) buttons, which have greater reliability than with conventional buttons. are large in size, making them convenient to operate in thick gloves Voluminous pockets on the torso are of the bend entrance, protecting the contents from falling out Pockets: 2 large pockets on the chest 2 large pockets at the bottom of the jacket 2 pocket "Napoleon" with zipper on the chest one flat pocket on the left sleeve and one inner left zip Laces: at the waist and bottom of jacket, with elastic cords for protection against the cold under clothing Undercoat: Quilted lining with insulation that extends the life of clothing (insulation remains in place when cleaning or washing) Fastening to the smoke and buttoning when wearing as a separate jacket, are made with the help of convenient lenticular buttons of the American model Hood, adjustable oval face. For comfortable wear the inner part of the hood trimmed with fleece Vents on the armpits Knitted cuffs for comfort Inner left pocket zipper The material of products: The main fabric smoke: Strong (high-density differs from the counterpart used in the form of an Alloy), 35% cotton, 65% polyester Lining smoke: thin blended fabric, 35% cotton, 65% polyester The main fabric of the liner: 100% polyester Insulation liner: body - Primaloft® Black 2×133 g/m2 sleeves - Primaloft® Black 2×80 g/m2 Product weight: 46/176 R-R – 1969 50/176 R-R – 2097 g 54/182 R-R – 2181 g 56-58/188-p – 2439 g The website also presents the model of pants with insulation Primaloft® YOU MAY BE INTERESTED IN:
Seasonality: 3 Number of places: 1 Dimensions and weight: The dimensions of the outer tent, tent (L×W×In): 235×140×100 cm The sleeper dimensions (L×W×In): 235×80/50×100/60 cm Dimensions Packed (L×W×In): 42×14×14 cm Total weight: 1,10 kg Materials: Outer tent: Polyester 75D/190T PU 3000 mm Bottom: 100D Polyester PU 5000 mm Accessories: YKK Versatile, lightweight single layer tent with a separate vestibule As stands, you can use a normal rack purchased separately, trekking sticks or improvised material Additional loops on the ridge allow you to install the tent without struts with the help of external supports. For example, between two trees Not only has a spacious sleeping area for one person, but also quite spacious, fully close the vestibule for things All seams taped An air vent on the end ramp and a large ventilation window with mosquito net in the sleeping Department create a good flow-through ventilation Detachable garter straps on the bag makes it easy to fix under a backpack without additional fastening elements. In this case, the tent out from the bag, separating the bag from backpack (prerequisite: the rucksack must have straps on the bottom for external mounting) Rope guy wires are interwoven reflective thread Racks and pegs not included REVIEWS: Review and discussion of tents on the forum YOU MAY BE INTERESTED IN: General characteristics Purpose: tracking Inner tent: no Number of places: 1 Type of frame: internal Geometry: custom Design The number of inputs / rooms: 1 / 1 Number of vestibules: 1 Ventilation Windows: there Windows: no Interior pockets: no Canopy: no Protection The water resistance of an awning/bottom: 3000 / 5000 mm V.article Sealing joints: taped Wind/snow skirt: no Mosquito net: there UV protection: there Materials The material of an awning: polyester (Taffeta 190T 75D PU) The material of the bottom: polyester (100D 190T Taffeta PU) The material of arches: steel Diameter of arcs: 16 mm Dimensions and weight Dimensions outer tent (LxWxH): 240x140x120 cm Weight: 1.8 kg Additional information: delays have interwoven reflective thread, as stands you can use trekking poles or improvised material, color: khaki, camouflage
Seasonality: 2 Number of places: 2 Dimensions and weight: Dimensions of tent (L×W×In): 200×120×110 cm Dimensions Packed (L×W×In): 45×15×15 cm Total weight: 2,13 kg Minimum weight (without pegs, racks and packaging): 1.16 kg Materials: Outer tent: Polyester 75D/190T 3000mm Bottom: Polyester 75D/190T 5000 mm Stand: Steel Ø16 mm Accessories: YKK Classic single house. For recreation and simple hikes Easy to install All seams taped Entrance zipper Additional loops on the ridge allow you to install the tent without struts with the help of external supports, for example, between two trees Most of the entrance and opposite end walls made of mosquito nets. Through this well ventilated Windproof waterproof blinds allow you to completely or partially cover the ventilation Windows with mosquito mesh. This makes it possible to achieve optimal ventilation Large overhangs on the sides and an extra visor with the ends of the tent will protect from the "skew" of rain Detachable garter straps on the bag makes it easy to fix under a backpack without additional fastening elements. In this case, the tent out from the bag, separating the bag from backpack (prerequisite: the backpack should be at the bottom of the at least two lines such as the Mall) Rope guy wires are interwoven reflective thread Additions to design tents: (submitted tests and reviews on our forum) For better protection from driving rain waterproof roller blind on the entrance moved to the outside. The shutter is closed by a separate closure provided with a large fixed Velcro strap New waterproof roller blind on the entrance is equipped with ventilation Windows at the top, which is completely protected from driving rain by the overhang of the canopy. Thus, ventilation is maintained even when fully enclosed waterproof blinds On front side additionally taped the bottom corners of the waterproof blinds for better protection from driving rain General characteristics Purpose: tracking Inner tent: no Number of places: 2 Type of frame: internal Geometry: gable Design The number of inputs / rooms: 2 / 1 Number of vestibules: no Ventilation Windows: no Windows: no Interior pockets: no Storm delays: there Canopy: no Protection The water resistance of an awning/bottom: 3000 / 5000 mm V.article Sealing joints: taped Wind/snow skirt: no Mosquito net: there UV protection: no Materials The material of an awning: polyester (75D/190T PU) The material of the bottom: polyester (100D PU) The material of arches: steel Diameter of arcs: 16 mm Dimensions and weight Dimensions outer tent (LxWxH): 200x120x120 cm Dimensions Packed (LxWxH): 40x15x15 cm Weight: 2.3 kg Additional information: reflective thread in the guy wires
Pants from a special costume parachute parts Buttons The belt is adjustable in size using the side elastics Inflated belt for convenience of carrying ammunition on the belt The loops wide waist belt The reinforcing plates with a softening inset on the knees (photo A) Mesh for ventilation in the groin The bottom of trousers on an elastic band Cuff bottom trousers compressed by the tape that prevents entry of debris into the Shoe Pockets: 2 side pockets and 2 front pockets with fold top, which prevents spontaneous loss of items 1 pocket under 2 back pockets Material: 100% cotton YOU MAY BE INTERESTED IN: Designed for parachute-piece suit, was very convenient for the tourists. All that ground under the parachute, and well under the backpack. Durable thick canvas fabric, pre-lined and having a high resistance to fading. breathes, protects from wind and moisture, is not afraid of fire (if not dry clothes on using fire wire) and not the insect bite wound. Free cut jacket does not restrict movement and is devoid of protruding parts. Due to the absence of the lower pockets, it can be worn as trousers, and tucked into pants. Characteristic of uniform buttons. The bottom is adjustable in size. Two front and side pockets easy access pockets on the sleeves are protected by valves. Internal pocket for documents made of water-repellent fabric. Ventilation in most places of overheating in the jacket and trousers provides the mesh fabric. The most intense (elbows and knees) are enhanced with additional overlays (on your knees with a softening inset). Pants with high elastic adjustable belt and stripgame under a wide strap and comfortable to wear on the belt the necessary gear. Loose cut, tightened the bottom of the leg allow you to move freely on the most inaccessible places and protect from ingress of debris. Restraint is compensated by the abundance of pockets on the trousers. Inset pockets with side simple and familiar, two back pockets with flaps, two front with flaps in front at the hips and a pocket under the knife. You can place everything you need from salt, matches, maps, compass and GPS up to the horns of the machine. Durable, comfortable, breathable, hardy will be a reliable protection in the woods and in the air.
Patent No. 43609 Jacket: Worn worn outside You can use fanspage Zipper The belt is adjustable in size using the side contractions The loops wide waist belt Cuffs with putty (tissue box) on the sleeve to protect from dust and dirt Used stainless button Pockets: 4 outer and 2 inner pockets 1 pocket on the sleeve Pants: Manufactured according to the standard model of domestic airborne models Inflated belt for convenience of carrying ammunition on the belt The loops wide waist belt The belt is adjustable in size using the side elastics Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The bottom of trousers on an elastic band Cuffs with elastic band at the bottom of the pants to prevent debris and do not allow them to creep up Pockets: 2 side pockets and 2 front pockets with fold top, which prevents spontaneous loss of items 1 back pocket The material of products: "Gretta": 53% cotton; 47% polyester
Further development Jackets "Mountain 4" with a number of improvements. A jacket is recommended for Hiking, as well as demi-season field form mountain divisions. Jacket provides high wear resistance, protection from wind and water, has a low weight compared to older models Attention! The stated size two points smaller than the similar jacket "Mountain 4". For the same stated size jacket "Mountain 5" is designed for wearing over t-shirts, "Mountain 4" – more than baggy, designed for putting on top of warm clothing All the buttons, except the cuffs, canadian (on tape leg), almost impossible to tear. In a new suit leg band is sewn extra strong tack-zigzag. The majority of large diameter buttons for easier operation with gloves. Most of the buttons covered by placket to prevent getting caught in surrounding objects Unified system of protection of the elbows. The set includes a removable molded insert foam, it is possible to install shock-absorbing D3O elbow pads (must be purchased separately!). Substantially increased reliability of retention of the elbow pads inside of pads through the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog). Also the reliability of the new power-UPS are sewn along the perimeter of two parallel lines All major seams are lapped with chain stitch. Loaded places enhanced tack-zigzag A new Central zip with additional storm placket, fully protecting the body from the cold wind The hood is adjustable in three dimensions, non-deforming when otagowane of non-rigid hood visor (is a continuation of the hood), anatomic form - does not block peripheral vision Buttoned cuffs American sample in the style of BDU, three positions, possibly stirring by buttons under your wrist. In hot weather you can roll up sleeves to elbows In the new model are in contact with the body parts (hood, inside pockets, and sop.) made of blended fabric lining fabric instead of nylon and mesh, to prevent burns and more tactile comfort Pockets: two pocket "Napoleon" on the chest, easy entry even while wearing the straps of backpacks/CPF spacious lower cargo pockets with reversed entry, protecting the contents from falling out. In the new model reduced the thickness of the pockets to combat the bagginess sleeve pockets new sample on canadian button closure instead of Velcro two inner pockets with top entry with Velcro closure Laces: at the waist and bottom with elastic cords, the ends of the cords passed through a special loop and not bothering to zip up jacket Materials: The main fabric is a special lightweight tarp, lighter than a standard (jacket "Mountain 3") by 20% without loss of protective properties. Has a high resistance to fading and abrasion, pre-shrinkage Amplification - 100% rip-stop. Lighter and stronger than typical amplification polyester canvas mountain costumes (including "Mountain 3") The lining is a thin polyester fabric, 35% cotton, 65% polyester Attention! Before washing to remove the protective inserts in the knee pads/elbow pads from the respective pockets. Do not wash protective inserts in the washing machine. When washing in a washing machine products from tarpaulin - perhaps the emergence of signs of wear. SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size REVIEWS: Review from maxkov71 on the website nepropadu.EN Detailed description, pictures and discussion of the suit on the Forum YOU MAY BE INTERESTED IN:
The classic model, straight cut Material: 100% Cotton Product weight: 50 R-R – 166 g 54 R-R – 203 g 58 R-R – 217 g REVIEWS: Review the website "Russel" YOU MAY BE INTERESTED IN:
Sale
Форма одежды
Институтский переулок, дом 2/1 Москва
info@militaristwear.com info@militaristwear.com
up
up