Categories

The screws

106 products, 38 videos
No products to compare
Sorting
Number:
Бренд
Appointment
Type of equipment
Material
The type of bag
Color
Цена
Weight: 3.75 All sizes: Length in working position - 1370 - 1970 mm. // Length in folded position - 935 mm. Features: The drill bit diameter of 150 mm. // Drilling depth - up to 1475 mm. packing weight kg: 4,8 packaging dimensions see: 96*23*16 For those who choose best: advanced technologies now and in ice screws Russian production! Ledobur "TORNADO" (foldable, screw, two-handed with a sliding bar-extension and left rotation) is used for drilling holes in ice at sport fishing. The upper arm of the ice is offset relative to the axis of the screws at 125mm, and lower by 155 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. The main innovations of the ice TORNADO compared to previous versions: 1. New swivel mechanism foldable handle - compact size, higher reliability, a complete absence of backlash, the absolute alignment of the screw and handle. 2. Insert telescopic extender allows you to gradually increase the drilling depth up to 1475 mm. Rod-extension painted polymeric powder paint. 3. Comfortable handles - durable frame made of hard plastic covered with soft plastic, remaining pleasant to the touch even when severe frosts. 4. The pitch of the screw is increased by 10%, which provides more rapid release of the wells from the sludge, reduces the effort of drilling and also prevents jamming of the auger. At the same time, this innovation had almost no impact on clean holes after drilling. 5. Original painting "chameleon" not only has attractive appearance but also is one of the best polymer powder paints in mechanical strength. 6. Complete set of screws includes a full-sized case made of high quality durable fabrics, designed for easy storage and transportation. 7. The highest level of quality control in the manufacture of each of the screws passes total control over more than fifty quality parameters.
All sizes: 8*1.8 CM Material: steel packing weight kg: 0.1 packaging dimensions see: 8*1.8 Designed to connect the auger of the ice with the screwdriver.  Using a screwdriver makes drilling holes from manual to mechanical. 
Material: The cover is made of modern high strength material, almost no wear, besides lightweight and quick-drying. packing weight kg: 0.200 packaging dimensions see: 85*16cm Specially designed for transporting and storing all models of screws with a diameter of 150 mm from company "Tonar Plus" case for ledobura can increase the safety of operation, provides the convenience and practicality.  All models of screws with a diameter of 150 mm when assembled for transportation have appropriate size and can be folded in cover ( model RL-150, RL-150Д, HR-150T). To ensure high strength characteristics of case manufacturers have selected the special material which is light, resistant to wear and dries quickly.
Material: The cover is made of modern high strength material, almost no wear, besides lightweight and quick-drying. packing weight kg: 0.168 packaging dimensions see: 26*12*4 The case for screws with a diameter of 100 mm. Fits models RL-100 and RL-100Д. Convenient for transportation and storage of the ice. Increases the safety of operation. The cover is made of modern high strength material, almost no wear, besides lightweight and quick-drying. The case can be purchased separately and book directly with screws.
Material: The cover is made of modern high strength material, almost no wear, besides lightweight and quick-drying. packing weight kg: 0.200 packaging dimensions see: 95*29*3cm The case for screws with a diameter of 180 mm. Suitable for models of the RL-180, RL-and RL 180Д-180T. Convenient for transportation and storage of the ice. Increases the safety of operation.  The cover is made of modern high strength material, almost no wear, besides lightweight and quick-drying. The case can be purchased separately and book directly with screws.
Weight: 0.170 Material: The cover is made of modern high strength material, almost no wear, besides lightweight and quick-drying. Features: Suitable for models of the RL-130, LR-130D and LR-130T. Convenient for transportation and storage of the ice. packing weight kg: 0.170 packaging dimensions see: 30*12*4 The case for screws with a diameter of 130 mm.  Suitable for models of the RL-130, LR-130D and LR-130T.  Convenient for transportation and storage of the ice. Increases the safety of operation.
Case for storage and transportation of the ice. Protects from external damage material: waterproof polyester D600
Package contents: Package contents: in box complete with screws. Material: The knives are made from carburized alloy steel, with volume hardening and high toughness that allows you to repeatedly resharpened knives without the Features: Set of blades for ice drill drilling diameter 180 mm. packing weight kg: 0.12 packaging dimensions see: 8*3.5*1.5 Design: For screws with a diameter of 180 mm are installed just four of the knife on the working surface of the outer knives are made grooves. The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Package contents: Package contents: in box complete with screws. Material: Knives are the optimum angles of cut , are made of carburized alloy steel, with volume hardening and high toughness, allowing mn Features: Set of blades for ice drill of the drill bit diameter of 100 mm. packing weight kg: 0.08 packaging dimensions see: 8*3.5*1.5 Set of blades for ice drill of the drill bit diameter of 100 mm. Knives are the optimum angles of cut , are made of carburized alloy steel. After hardening have a hardness of 55-60 HRC that allows you to repeatedly resharpened blades without degrading their original properties. For maximum effect when using the screws, we recommend You to use knives production group of companies "TONAR".
Package contents: Package contents: in box complete with screws. Material: The knives are made from carburized alloy steel, with volume hardening and high toughness that allows you to repeatedly resharpened knives without the Features: Set of blades for ice drill diameter drilling 150 mm. packing weight kg: 0.1 packaging dimensions see: 8*3.5*1.5 Features: Set of blades for ice drill diameter drilling 150 mm. Design: Knives have a unique design – two steps at a time with the slots and adjusted the angles of the cutting planes provide easy cleavage of the ice and its removal from the cutting zone. Because of this, the speed of drilling screws with drill bit diameter of 150 mm can easily compete with the ice screws with a diameter of 130 mm, only slightly surpassing them in terms of effort.
Package contents: Case, knives, screws. Material: High carbon alloy steel, the hardness HRC 55-60 Features: Set of blades for ice drill of the drilling diameter of 80 mm. packing weight kg: 0.06 packaging dimensions see: 8*3.5*1.5 Set of blades for ice drill of the drilling diameter of 80 mm. Knives are the optimum angles of cut, are made of carburized alloy steel. After hardening have a hardness of 55-60 HRC that allows you to repeatedly resharpened blades without degrading their original properties.
Package contents: Package contents: in box complete with screws. Material: The knives are made from carburized alloy steel, with volume hardening and high toughness that allows you to repeatedly resharpened knives without the Features: Set of blades for ice drill of the drill bit diameter of 130 mm. packing weight kg: 0.09 packaging dimensions see: 8*3.5*1.5 Design: Knives are made with two steps separated by a transverse groove , three cutting edges deliver high drilling speed, reduce the supplied from The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Weight: 3,12 kg. All sizes: The drill bit diameter of 130 mm, drilling Depth up to 1470 mm Length in working position - 1340 - 1970 mm. Features: Insert telescopic extender allows you to gradually increase the drilling depth up to 1430 mm packing weight kg: 3.5 packaging dimensions see: 93*43*13 Ledobur "TORNADO" (foldable, screw, two-handed with a sliding bar-extension and left rotation) is used for drilling holes in ice at sport fishing. The upper arm of the ice is offset relative to the axis of the screws at 125mm, and lower by 155 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. The drill bit diameter of 130 mm. Drilling depth - up to 1430 mm. Length in working position - 1300 - 1900 mm. Length in folded position - 860 mm. Weight without case not more than 3,12 kg. The main innovations of the ice TORNADO compared to previous versions: 1. New swivel mechanism foldable handle - compact size, higher reliability, a complete absence of backlash, the absolute alignment of the screw and handle. 2. Insert telescopic extender allows you to gradually increase the drilling depth up to 1430 mm. 3. New comfortable handles - durable frame made of hard plastic covered with soft plastic, remaining pleasant to the touch even when severe frosts. 4. The pitch of the screw is increased by 10%, which provides more rapid release of the wells from the sludge, reduces the effort of drilling and also prevents jamming of the auger. At the same time, this innovation had almost no impact on clean holes after drilling. 5. Changed geometry of the cutting head a bevel on its end surfaces significantly reduce efforts when drilling. 6. Original painting "chameleon" not only has attractive appearance but also is one of the best polymer powder paints in mechanical strength. 7. Complete set of screws includes a full-sized case made of high quality durable fabrics, designed for easy storage and transportation. 8. The highest level of quality control in the manufacture of each of the screws passes total control over more than fifty quality parameters.
Weight: Weight without case not more than 3,05 kg. All sizes: Length in working position - 1340-1970 mm. Package contents: Package contents: screws, case. Features: collapsible, screw, two-handed with a sliding bar-extension and left rotation. Packaged size: Size folded: 930 mm. packing weight kg: 3.1 packaging dimensions see: 93*43*10 The main innovations of the ice TORNADO compared to previous versions:1. New swivel mechanism foldable handle - compact size, higher reliability, a complete absence of backlash, the absolute alignment of the screw and handle. 2. Insert telescopic extender allows you to gradually increase the depth of drilling up to 1500 mm. 3. New comfortable handles - durable frame made of hard plastic covered with soft plastic, remaining pleasant to the touch even when severe frosts. 4. The pitch of the screw is increased by 10%, which provides more rapid release of the wells from the sludge, reduces the effort of drilling and also prevents jamming of the auger. At the same time, this innovation had almost no impact on clean holes after drilling. 5. Changed geometry of the cutting head a bevel on its end surfaces significantly reduce efforts when drilling. 6. Original painting "chameleon" not only has attractive appearance but also is one of the best polymer powder paints in mechanical strength. 7. Complete set of screws includes a full-sized case made of high quality durable fabrics, designed for easy storage and transportation. 8. The highest level of quality control in the manufacture of each of the screws passes total control over more than fifty quality parameters. Design: The upper arm of the ice is offset relative to the axis of the screws at 125mm, and lower by 155 mm. This arrangement of arms allows you to rotate the screws, synchronous
All sizes: 163*31*12 see Dina auger - 77 see Material: metal, heavy-duty plastic packing weight kg: 1.9 packaging dimensions see: 84*32*16 Classic two-handed screws.  The auger is made of heavy duty plastic which greatly reduced the weight.  The rotation of the ice – the left (counterclockwise).  THREE knife 110 mm. diameter, blades are straight. 
Weight: 2.3 kg. All sizes: length 1600 mm, drilling diameter is 100 mm. Features: drilling depth 1000 mm. Packaged size: Size folded: 80 x 39 cm. packing weight kg: 2.4 packaging dimensions see: 80*40*10 The ice fishing classic are produced of CJSC `TONAR plus` since 1999. The drill bit diameter of 100 mm, drilling depth is 1000 mm, the weight of the ice – 2,3 kg. The rotation of the ice – the left (counterclockwise) top handle coincides with the axis of the screws (it is more convenient and allows you to expend less effort). When folding in the transport position, the handle and the screw have the same length, so screws, is convenient for transportation. Classic picks are the most popular among anglers. Original design and technological solutions (design of screws protected by three patents of the Russian Federation) has allowed to create a versatile screws, suitable for any fishing conditions. High drilling speed, low efforts in combination with outstanding reliability and durability have determined the choice of tens and hundreds of thousands of fishermen throughout Russia of the Barnaul in favour of the ice.
Weight: 3,55 kg. All sizes: length 1930 mm, drilling diameter is 180 mm. Features: drilling depth from 1000 to 1350 mm. Packaged size: Size folded: 93 x 43 cm packing weight kg: 3.55 packaging dimensions see: 93*43*20 The main difference between the telescopic screws from the classical models – have built-in telescopic rod-extension. Rod extender built into the axis of the screws, has four fixed positions of adjustment (100 mm), allowing to precisely adjust the drilling depth according to the thickness of the ice from 1000 to 1350 mm. The locking mechanism made in the form of a collet and a compressible bolt, which through the axis of the screws is screwed into the nut welded to it. This solution allows to achieve maximum strength of the clamp while maintaining alignment of the handle and the auger of the ice. Zinc protective coating of the rod-extension, provides better resistance to mechanical stress and to corrosion.
All sizes: height 158 cm Material: steel Features: Drilling depth 1000 mm packing weight kg: 2.7 packaging dimensions see: 83*33*15 Screws, Helios HS-150D - ice screw foldable fishing auger with a drilling diameter of 150 mm. The upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. Drilling depth: 1000 mm. The weight of the ice is 2.5 kg. The differences of the budget Helios from ice screws classic ice Tonar Republic of Latvia: 1) Used a more budget paint domestic production.2) Used cheaper plastic on the handles.3) Lamb plastic, not metal.4) semi-circular knives - a new development of GC Tonar. Semicircular knives provide smoother vprasanje any ice, compared to flat. It is rather a plus of this model!
Weight: 2.4 kg. All sizes: height 157 cm Warranty: 6 months Features: Drilling depth: 1000 mm. packing weight kg: 2.4 packaging dimensions see: 81*33*12 Screws, Helios HS-130D - ice screw foldable fishing auger with a drill bit diameter of 130mm. The upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. Equipped with screws, knives scat. Drilling depth: 1000 mm. The weight of the ice - 2,2 kg. The differences of the budget Helios from ice screws classic ice Tonar Republic of Latvia: 1) Used a more budget paint domestic production.2) Used cheaper plastic on the handles.3) Lamb plastic, not metal.4) semi-circular knives - a new development of GC Tonar. Semicircular knives provide smoother vprasanje any ice, compared to flat. It is rather a plus of this model!
Features: Drilling depth: 1000 mm. packing weight kg: 2.1 Screws, Helios HS-110D - ice screw foldable fishing auger with a drill bit diameter of 110mm. The upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. The set screws are semi-circular knives. Drilling depth: 1000 mm. The differences of the budget Helios from ice screws classic ice Tonar Republic of Latvia: 1) Used a more budget paint domestic production.2) Used cheaper plastic on the handles.3) Lamb plastic, not metal.4) semi-circular knives - a new development of GC Tonar. Semicircular knives provide smoother vprasanje any ice, compared to flat. It is rather a plus of this model!
All sizes: drilling diameter 110 mm. Material: frost-resistant, corrugated plastic, metal. packing weight kg: 3.6 packaging dimensions see: 77*28*14 Two-handed screws. Rotation right (clockwise). Handle made of frost-resistant, fluted plastic. Retractable rod extender. Knives direct.  The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Weight: 2.4 kg. All sizes: Diameter 80 mm Package contents: the ladle with wooden handle for hole diameter of 80 mm, set of spare blades. Features: The main feature of the sports of the ice - significantly increased the barrel length and the number of turns of the screw . packing weight kg: 2.4 packaging dimensions see: 80*39*10 The main innovation of the sport of ice significantly increased the barrel length and the number of turns of the screw. This screws you can drill wells with a depth up to 800 mm, without removing the screws from the ice and the maximum drilling depth is 1100 mm. Dia of drilling – 80 mm, weight of ice and 2.4 kg.
Weight: 3.2 kg. All sizes: length 1600 mm, drilling diameter is 180 mm. Features: drilling depth 1000 mm. Packaged size: Size folded: 880 x 430 mm. packing weight kg: 3.2 packaging dimensions see: 88*43*20 The only difference between a two-handed screws from the classic upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. In addition, significantly reduced the size of the ice in the transport position. All other characteristics of two-handed screws are fully consistent classic.
Weight: 3.1 kg. All sizes: length 1600 mm, drilling diameter is 180 mm. Features: drilling depth 1000 mm. Packaged size: Size folded: 930 x 430 mm. packing weight kg: 3.2 packaging dimensions see: 80*39*20 The ice fishing classic are produced in CJSC TONAR plus since 1999. The drill bit diameter of 180 mm, drilling depth 1000 mm, weight – 3.1 kg. The rotation of the ice – the left (counterclockwise) top handle coincides with the axis of the screws (it is more convenient and allows you to expend less effort). When folding in the transport position, the handle and the screw have the same length, so screws, is convenient for transportation. Classic picks are the most popular among anglers. Original design and technological solutions (design of screws protected by three patents of the Russian Federation) has allowed to create a versatile screws, suitable for any fishing conditions. High drilling speed, low efforts in combination with outstanding reliability and durability have determined the choice of tens and hundreds of thousands of fishermen throughout Russia of the Barnaul in favour of the ice.
All sizes: length 1600 mm, drilling diameter is 150 mm. Features: drilling depth 1000 mm. packing weight kg: 3.2 packaging dimensions see: 80*40*15 The only difference between a two-handed screws from the classic upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. In addition, significantly reduced the size of the ice in the transport position. All other characteristics of two-handed screws are fully consistent classic. The production of axes with the drilling diameter of 150 mm is intended to cover a vacant niche between the diameters of 130 and 180 mm. In cases when you need larger diameter holes, and the use of screws 180 still impractical, an indispensable tool of the Fisher will be `strategicaly`. The center distance of the mounts of the blades is increased for greater rigidity and different from other screws diameter production company TONAR plus.
Weight: 3.2 kg. All sizes: Drilling diameter is 150 mm, drilling Depth is 1000 to 1350 mm Features: drilling depth from 1000 to 1350 mm. packing weight kg: 3.2 packaging dimensions see: 80*39*15 The main difference between the telescopic screws from the classical models – have built-in telescopic rod-extension. Rod extender built into the axis of the screws, has four fixed positions of adjustment (100 mm), allowing to precisely adjust the drilling depth according to the thickness of the ice from 1000 to 1350 mm. The locking mechanism made in the form of a collet and a compressible bolt, which through the axis of the screws is screwed into the nut welded to it. This solution allows to achieve maximum strength of the clamp while maintaining alignment of the handle and the auger of the ice. Zinc protective coating of the rod-extension, provides better resistance to mechanical stress and to corrosion. The production of axes with the drilling diameter of 150 mm is intended to cover a vacant niche between the diameters of 130 and 180 mm. In cases when you need larger diameter holes, and the use of screws 180 still impractical, an indispensable tool of the Fisher will be `strategicaly`. The center distance of the mounts of the blades is increased for greater rigidity and different from other screws diameter manufactured by JSC `TONAR plus`.
Weight: 3.1 kg. All sizes: length 1600 mm, drilling diameter is 150 mm. Features: drilling depth 1000 mm. packing weight kg: 3.1 packaging dimensions see: 80*39*15 The production of axes with the drilling diameter of 150 mm is intended to cover a vacant niche between the diameters of 130 and 180 mm. In cases when you need larger diameter holes, and the use of screws 180 still impractical, an indispensable tool of the Fisher will be `strategicaly`. The main feature of the screws of the RL-150 is a unique design of blades – two steps from the slits and adjusted the angles of the cutting planes provide easy cleavage of the ice and its removal from the cutting zone. Because of this, the drilling speed HR-150 can easily compete with the ice screws with a diameter of 130 mm, only slightly exceeding the RL-130 to your efforts. The center distance of the mounts of the blades is increased for greater rigidity and different from other screws diameter manufactured by JSC `TONAR plus`. The drill bit diameter of 150 mm, drilling depth is 1000 mm. The rotation of the ice – the left (counterclockwise) top handle coincides with the axis of the screws .
Weight: 2.5 kg. All sizes: length 1600 mm, drilling diameter is 130 mm. Features: drilling depth 1000 mm. Packaged size: Size folded: 80 x 40 mm. packing weight kg: 2.95 packaging dimensions see: 80*39*15 The ice fishing classic are produced of CJSC `TONAR plus` since 1999. The drill bit diameter of 100 mm, drilling depth is 1000 mm, the weight of the ice – 2,3 kg. The rotation of the ice – the left (counterclockwise) top handle coincides with the axis of the screws (it is more convenient and allows you to expend less effort). When folding in the transport position, the handle and the screw have the same length, so screws, is convenient for transportation. Classic picks are the most popular among anglers. Original design and technological solutions (design of screws protected by three patents of the Russian Federation) has allowed to create a versatile screws, suitable for any fishing conditions. High drilling speed, low efforts in combination with outstanding reliability and durability have determined the choice of tens and hundreds of thousands of fishermen throughout Russia of the Barnaul in favour of the ice.
Weight: 3.1 kg. All sizes: length 1670 mm, drilling diameter is 100 mm. Features: drilling depth up to 1100 mm. packing weight kg: 2,74 packaging dimensions see: 90*30*10 The main innovation of the sport of ice significantly increased the barrel length and the number of turns of the screw. This screws you can drill wells with a depth up to 800 mm, without removing the screws from the ice and the maximum drilling depth is 1100 mm. The main difference from the model HR-100C is the possibility of drilling with both hands, the handle of the ice-RL-100СД the same as two-handed screws. The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Weight: 2.4 kg. All sizes: length 1600 mm, drilling diameter is 100 mm. Features: drilling depth 1000 mm. Packaged size: Size folded: 800 x 300 mm. packing weight kg: 2.4 packaging dimensions see: 80*40*10 The only difference between a two-handed screws from the classic upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. In addition, significantly reduced the size of the ice in the transport position. All other characteristics of two-handed screws are fully consistent classic.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. The easiest and, accordingly, the cheapest from the Swedish ice screws Mora Eriksson. Reliable foldable connection that is not getting loose over time. This model is equipped with a flat cutting blades that have a small "angle of attack" to the surface of the ice, so the ice screw is well suited for drilling medium and raw ice. The difference between Spiralen and Expert lies not only in the form of knives, but in drilling speed and, consequently — the number of wasted efforts. Expert drills faster due to the increased step. It works great on wet ice and allows the ice to drill icings. Expert but requires better physical preparation than Spiralen. Spiralen a little slower, but spin it much easier.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. The easiest and, accordingly, the cheapest from the Swedish ice screws Mora Eriksson. Reliable foldable connection that is not getting loose over time. This model is equipped with a flat cutting blades that have a small "angle of attack" to the surface of the ice, so the ice screw is well suited for drilling medium and raw ice. The difference between Spiralen and Expert lies not only in the form of knives, but in drilling speed and, consequently — the number of wasted efforts. Expert drills faster due to the increased step. It works great on wet ice and allows the ice to drill icings. Expert but requires better physical preparation than Spiralen. Spiralen a little slower, but spin it much easier.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. The easiest and, accordingly, the cheapest from the Swedish ice screws Mora Eriksson. Reliable foldable connection that is not getting loose over time. This model is equipped with a flat cutting blades that have a small "angle of attack" to the surface of the ice, so the ice screw is well suited for drilling medium and raw ice. The difference between Spiralen and Expert lies not only in the form of knives, but in drilling speed and, consequently — the number of wasted efforts. Expert drills faster due to the increased step. It works great on wet ice and allows the ice to drill icings. Expert but requires better physical preparation than Spiralen. Spiralen a little slower, but spin it much easier.
The new model replaced Viking folding. The main difference from its predecessor, except more durable paint is a new system of folding handles, which allowed us to make the drill even more compact and convenient. This model has a telescopic joint assemblies with multiple fixed positions to adjust the length and gathering the handle, which facilitates transportation of this model.
The new model replaced Viking folding. The main difference from its predecessor, except more durable paint is a new system of folding handles, which allowed us to make the drill even more compact and convenient. This model has a telescopic joint assemblies with multiple fixed positions to adjust the length and gathering the handle, which facilitates transportation of this model.
The new model replaced Viking folding. The main difference from its predecessor, except more durable paint is a new system of folding handles, which allowed us to make the drill even more compact and convenient. This model has a telescopic joint assemblies with multiple fixed positions to adjust the length and gathering the handle, which facilitates transportation of this model.
The new model replaced Viking folding. The main difference from its predecessor, except more durable paint is a new system of folding handles, which allowed us to make the drill even more compact and convenient. This model has a telescopic joint assemblies with multiple fixed positions to adjust the length and gathering the handle, which facilitates transportation of this model.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. All the screws of the new series will serve you for more than 3 years (salt water) and at least 10 years (fresh water). Each model of the ice is versatile, but best suited for certain conditions. For example, if You do not need to drill thick ice, and the volume and weight of Luggage is limited, then the best option would be screws Micro series. But at the same time, this drill can drill and thick ice up to 80cm. Well, if You are fishing in the North country and ice often exceeds 1.5 meters, then your best choice is the Arctic model with sliding system and very long shnekovye.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. All the screws of the new series will serve you for more than 3 years (salt water) and at least 10 years (fresh water). Each model of the ice is versatile, but best suited for certain conditions. For example, if You do not need to drill thick ice, and the volume and weight of Luggage is limited, then the best option would be screws Micro series. But at the same time, this drill can drill and thick ice up to 80cm. Well, if You are fishing in the North country and ice often exceeds 1.5 meters, then your best choice is the Arctic model with sliding system and very long shnekovye.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. All the screws of the new series will serve you for more than 3 years (salt water) and at least 10 years (fresh water). Each model of the ice is versatile, but best suited for certain conditions. For example, if You do not need to drill thick ice, and the volume and weight of Luggage is limited, then the best option would be screws Micro series. But at the same time, this drill can drill and thick ice up to 80cm. Well, if You are fishing in the North country and ice often exceeds 1.5 meters, then your best choice is the Arctic model with sliding system and very long shnekovye.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. All the screws of the new series will serve you for more than 3 years (salt water) and at least 10 years (fresh water). Each model of the ice is versatile, but best suited for certain conditions. For example, if You do not need to drill thick ice, and the volume and weight of Luggage is limited, then the best option would be screws Micro series. But at the same time, this drill can drill and thick ice up to 80cm. Well, if You are fishing in the North country and ice often exceeds 1.5 meters, then your best choice is the Arctic model with sliding system and very long shnekovye.
A modified version of the ice-Royal Viking, which was manufactured recent years. Difference from the previous model is more resistant coating and painting. The design has a telescopic system to separation height, and the high sacovini that allows not only effectively to drill the ice of great thickness, but also to remove ice chips from the hole. Design: This model has a folding handle and a spherical cutting blades.
A modified version of the ice-Royal Viking, which was manufactured recent years. Difference from the previous model is more resistant coating and painting. The design has a telescopic system to separation height, and the high sacovini that allows not only effectively to drill the ice of great thickness, but also to remove ice chips from the hole. Design: This model has a folding handle and a spherical cutting blades.
A modified version of the ice-Royal Viking, which was manufactured recent years. Difference from the previous model is more resistant coating and painting. The design has a telescopic system to separation height, and the high sacovini that allows not only effectively to drill the ice of great thickness, but also to remove ice chips from the hole. Design: This model has a folding handle and a spherical cutting blades.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. A model that has long been a classic. An indicator of this is the fact that when changing the model range of the Swedish manufacturer "did not find the strength to" remove or modify the screws. Expert is equipped with a semi-circular in two planes cutting knives, which allow drilling as a dry solid, or wet ice. The difference between Spiralen and Expert lies not only in the form of knives, but in drilling speed and, consequently — the number of wasted efforts. Expert drills faster due to the increased step. It works great on wet ice and allows the ice to drill icings. Expert but requires better physical preparation than Spiralen. Spiralen a little slower, but spin it much easier.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. A model that has long been a classic. An indicator of this is the fact that when changing the model range of the Swedish manufacturer "did not find the strength to" remove or modify the screws. Expert is equipped with a semi-circular in two planes cutting knives, which allow drilling as a dry solid, or wet ice. The difference between Spiralen and Expert lies not only in the form of knives, but in drilling speed and, consequently — the number of wasted efforts. Expert drills faster due to the increased step. It works great on wet ice and allows the ice to drill icings. Expert but requires better physical preparation than Spiralen. Spiralen a little slower, but spin it much easier.
The Swedish company "MORA Eriksson" produces five types of screws. All models have high reliability. Mechanical locks and connections do not become loose over time. The new system of addition of the handle is more compact compared to older models, but less reliable. Resistant multi-layer painting practically is not destroyed and prevents the rusting of the screws. A model that has long been a classic. An indicator of this is the fact that when changing the model range of the Swedish manufacturer "did not find the strength to" remove or modify the screws. Expert is equipped with a semi-circular in two planes cutting knives, which allow drilling as a dry solid, or wet ice. The difference between Spiralen and Expert lies not only in the form of knives, but in drilling speed and, consequently — the number of wasted efforts. Expert drills faster due to the increased step. It works great on wet ice and allows the ice to drill icings. Expert but requires better physical preparation than Spiralen. Spiralen a little slower, but spin it much easier.
EXPERT PRO is an upgraded version of the popular ledobura EXPERT. The cutting part ledobura remained unchanged, the basic difference from the model SPIRALEN – the presence of spherical knives with a straight cutting edge. Angle knife sharpener complicated. A new model of the ice gained a new function - the possibility of lengthening the arm. Screws intended for drilling with a high speed of any ice: dry or wet. Screws are manufactured in 4 versions, diameter: 110, 130, 150 and 200 mm. To every screws only fits your size knives. When the thickness of the ice more than 115 cm ice screw can be equipped with extension for Mora Expert PRO (art. 20508). · Proven design folding handle · retractable Telescopic handle allows you to adjust the height of the ice drill · Auger ice screws can be used for drilling the ice with a cordless drill-screwdriver with adapter 210141 Mora.
EXPERT PRO is an upgraded version of the popular ledobura EXPERT. The cutting part ledobura remained unchanged, the basic difference from the model SPIRALEN – the presence of spherical knives with a straight cutting edge. Angle knife sharpener complicated. A new model of the ice gained a new function - the possibility of lengthening the arm. Screws intended for drilling with a high speed of any ice: dry or wet. Screws are manufactured in 4 versions, diameter: 110, 130, 150 and 200 mm. To every screws only fits your size knives. When the thickness of the ice more than 115 cm ice screw can be equipped with extension for Mora Expert PRO (art. 20508). · Proven design folding handle · retractable Telescopic handle allows you to adjust the height of the ice drill · Auger ice screws can be used for drilling the ice with a cordless drill-screwdriver with adapter 210141 Mora.
EXPERT PRO is an upgraded version of the popular ledobura EXPERT. The cutting part ledobura remained unchanged, the basic difference from the model SPIRALEN – the presence of spherical knives with a straight cutting edge. Angle knife sharpener complicated. A new model of the ice gained a new function - the possibility of lengthening the arm. Screws intended for drilling with a high speed of any ice: dry or wet. Screws are manufactured in 4 versions, diameter: 110, 130, 150 and 200 mm. To every screws only fits your size knives. When the thickness of the ice more than 115 cm ice screw can be equipped with extension for Mora Expert PRO (art. 20508). · Proven design folding handle · retractable Telescopic handle allows you to adjust the height of the ice drill · Auger ice screws can be used for drilling the ice with a cordless drill-screwdriver with adapter 210141 Mora.
EXPERT PRO is an upgraded version of the popular ledobura EXPERT. The cutting part ledobura remained unchanged, the basic difference from the model SPIRALEN – the presence of spherical knives with a straight cutting edge. Angle knife sharpener complicated. A new model of the ice gained a new function - the possibility of lengthening the arm. Screws intended for drilling with a high speed of any ice: dry or wet. Screws are manufactured in 4 versions, diameter: 110, 130, 150 and 200 mm. To every screws only fits your size knives. When the thickness of the ice more than 115 cm ice screw can be equipped with extension for Mora Expert PRO (art. 20508). · Proven design folding handle · retractable Telescopic handle allows you to adjust the height of the ice drill · Auger ice screws can be used for drilling the ice with a cordless drill-screwdriver with adapter 210141 Mora.
Weight: 2,95 kg. All sizes: length 1930 mm, drilling diameter is 130 mm. Features: drilling depth from 1000 to 1350 mm. Packaged size: Size folded: 80 x 40 cm. packing weight kg: 2.95 packaging dimensions see: 80*39*15 The main difference between the telescopic screws from the classical models – have built-in telescopic rod-extension . Rod extender built into the axis of the screws, has four fixed positions of adjustment (100 mm), allowing to precisely adjust the drilling depth according to the thickness of the ice from 1000 to 1350 mm. The locking mechanism made in the form of a collet and a compressible bolt, which through the axis of the screws is screwed into the nut welded to it. This solution allows to achieve maximum strength of the clamp while maintaining alignment of the handle and the auger of the ice. Zinc protective coating of the rod-extension, provides better resistance to mechanical stress and to corrosion.
Weight: 2.6 kg. All sizes: length 1600 mm, drilling diameter is 130 mm. Features: drilling depth 1000 mm. Packaged size: Size folded: 80 x 40 cm. packing weight kg: 2.6 packaging dimensions see: 80*39*15 The only difference between a two-handed screws from the classic upper arm of the ice is offset relative to the axis of the screws 130 mm and the bottom 150 mm. This arrangement of arms allows you to rotate the screws at the same time two hands, thereby increasing the speed of drilling holes in the ice. In addition, significantly reduced the size of the ice in the transport position. All other characteristics of two-handed screws are fully consistent classic.
Weight: 120 g (13 cm), 135 g (17 cm), 153 g (21 cm) Materials: steel (pipe and drill), aluminum (ear) Updated classic PETZL LASER ice screw The new PETZL LASER ice screws appeared superior sharpening. The use of steel as the base material provides strength and durability. Due to the special shape of the threads and an ergonomic aluminium handle, screws, very easily screwed New patented sharpening of a drill and a special thread form ensures easy start and quick screwing Improved ear — now it's more aluminum and ergonomically shaped Strong and durable steel undergoes a special treatment to reduce weight and increase strength There are 3 options for length of screws: 13 cm (130 P71A), 17 cm (170 P71A), 21 cm (210 P71A)
All sizes: The drill bit diameter of 110 mm. Package contents: 2 knives, 4 bolts Material: steel. A set of straight knives (2 knives, 4 bolts) screws for VISTA EZH with a diameter of 110 mm. Packaging - blister. The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Material: polyester (50%) and fabric TREVIRA (50%). packing weight kg: 0.30 packaging dimensions see: 93*16*16 The case for ledobura TORNADO 130 is made of modern high-strength material, resistant to abrasion. Very comfortable, has a zippered pocket for scoop and other fishing gear. The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Material: polyester. packing weight kg: 0.25 packaging dimensions see: 90*15*15 The case for ledobura TORNADO 100 is made of modern high-strength material, resistant to abrasion. Very comfortable, has a zippered pocket for scoop and other fishing gear.  The ice screw is an integral part of the equipment of the angler-winter road. The exception may be privaledge when the ice is still relatively thin. Parvaldu peshnja will be more preferable, as it allows faster punching hole on thin ice. The rest of the winter fishing ice bore is indispensable.
Ask a question
Sale