Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed wearing summer without a handkerchief in the back office. The length of the lower edge must be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample

Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed to wear summer dresses without a handkerchief in the back office. Dress length at the bottom edge should be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample.

Jacket: - free cut; clasp Central side, windproof placket, buttoned; - Flirty from the fabrics; - 2 Welt slant pockets with flap, buttoned down the front; - on the sleeves 1 overhead inclined pocket; - in the elbow reinforcing figured overlay; a bottom of sleeves on an elastic band; - hood double, with a visor, has a tight slide to adjust the volume; - the fit at the waist with the help of wings; Pants: - tailor made; - 2 side vertical pockets; - in the knee area, the rear halves of the pants along the seam of the seat – reinforcing plates; - 2 side patch pockets with flap; - Overhead figure 2 rear pockets with button closure; - cut parts in the knee area prevents them from stretching; - rear half below the knee gathered elastic band; - elastic waist; - bottom elastic band; - clip-on suspenders (braces); - belt loops; wearing – and the boots and trousers. material: tent fabric; composition: 100% cotton; density: 270 gr.; lining: the ripstop fabric, Oxford 600; cuff: Yes; sealing gum: Yes; pockets jacket/pant: Yes/Yes; optional: lightweight summer option; high strength fabric and seams;

The tunic is part of our daily and weekend uniforms of police officers of the new model. Worn with trousers. Material: Suiting (wool blend) fabric. Composition: 75% wool, 25% 280 g/m2 Lining: Twill 100% 105% g/m2. Adjacent cut, single breasted, fastened with four buttons. Turn-down collar with lapels. Shelves with cut barrels. Horizontal Welt side pockets in the "frame" with the valves. Back with a Central seam, in the lower part there is a slot. Vtachnoy sleeve, double seam. Jacket with leather sleeves. The left side of the lining is the inside pocket with "leaflets". Is designed for employees of internal Affairs authorities with special ranks of police, and also for the cadets (listeners) of educational institution of higher professional education of Russia. Has red trim on the sleeves. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. In addition, at this sewed epaulettes with buttons, and reinforced two lapel badges. How to sew a shoulder strap? To do this, except for the jacket and a shoulder strap, you will need a ruler, scissors, needle, thimble and strong thread red. Be sure to wear a thimble, even if you are used to sew without it, because sometimes through the needle passes with great difficulty, and could injure your fingers. If you have difficulty pulling the needle and thread from the shoulder strap, you can use the pliers or tweezers. 1) First, prepare the shoulder straps, E. attach all required insignia, as to do it on the already sewn the race will be much harder. 2) Take a shoulder strap and have it so that the side, remote from the closure, was in the fence to the seam that joins the shoulder of his tunic sleeve. At the same time, top aimed toward the back, the edge of the chase got 1 cm to go on top of the seam running along the shoulder. In other words, the shoulder straps should be slightly shifted forward. 3) Pass the needle and thread secure the shoulder straps to the jacket at three points: at the corners of the chase, at the place where he comes into contact with the sleeve seam and in the center of a semicircular cut. Now the shoulder straps will be secured and will not shift from the correct position in the process of sewing. 4) Then very carefully sew the shoulder straps around the perimeter, making the stitches so that on its surface could only barely visible dots at the places where the needle enters the ring, and the thread between two adjacent holes were mostly on the wrong side (the lining) jacket. Then the thread will not be noticeable even if it the color does not quite match the color of the shoulder straps. The optimal length of each stitch should be about 1 cm. 5) With the second shoulder strap follow the same pattern. How to strengthen the lapel badges? On the collar of his jacket is on the bisector (the line that divides the angle of the collar in half), at a distance of 25 mm from the corner of the collar to the center of the logo, the vertical axis of symmetry of the logo should be parallel to the departure of the collar. How to place awards on the police uniform? On the left side of the chest awards are in the following order: A special sign of distinction are arranged so that the upper edge pads the medals was at the level of the ledge of the lapel of his tunic and jacket. When wearing two or more special characters differences, they are separated in one row, from right to left at intervals of 10 mm between the side ends of the stars in the order listed. A special sign of distinction of one denomination are placed in the order of their awarding. Signs of orders, decorations and medals are laid out horizontally in a row from the center of the chest to the edge, from top to bottom in the order listed. When wearing two or more orders or medals of their pads together in a row on the common plank. Medals that does not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in the above order. Pads orders and medals of the second row should go under orders and medals of the first row, the upper edge of the Shoe bottom row is placed at 35 mm below the pads of the first row. Subsequent rows are arranged in a similar manner. Signs of orders, decorations and medals are on the jacket single breasted police so that the top edge of pads of the orders and medals of the first row located below the level of the ledge of the lapel on 90 mm. On the right side of the chest awards are in the following order: Order are arranged left to right in the order listed. The upper edge of the maximum size of the order of the first row are arranged at the level set for overall straps (pads) of the first row of orders and medals placed on the left side of the chest. Orders that do not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in order. The centers of orders in a series must be at the same level. The distance between the orders and ranks of the order of 10 mm. The sign of the number of injuries from lace Golden color (if severe injury) or dark red (light wound), you'll be on the strip of fabric top products. Width of braid 6 mm, length 43 mm. Stripe of the critically injured is located below the stripe on minor injuries. The distance between stripes of 3 mm. The sign of the number of wounds placed on the tunic and jacket to the right of the sign to honorary titles of the Russian Federation, and in his absence, in his place.

Material: -Classic pants with piping on side seam. -The volume of the belt is regulated by side panels with elastic braid. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging red

The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon

The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon

Note - in this model, the insulation of a fleece jacket just in! Colors : khaki   Jacket: - free cut; clasp Central side, windproof placket, buttoned; - Flirty from the fabrics; - 2 Welt slant pockets with flap, buttoned down the front; - on the sleeves 1 overhead inclined pocket; - in the elbow reinforcing figured overlay; a bottom of sleeves on an elastic band; - hood double, with a visor, has a tight slide to adjust the volume; - the fit at the waist with the help of wings; Pants: - tailor made; - 2 side vertical pockets; - in the knee area, the rear halves of the pants along the seam of the seat – reinforcing plates; - 2 side patch pockets with flap; - Overhead figure 2 rear pockets with button closure; - cut parts in the knee area prevents them from stretching; - rear half below the knee gathered elastic band; - elastic waist; - bottom elastic band; - clip-on suspenders (braces); - belt loops; wearing – and the boots and trousers. material: tent fabric; composition: 100% cotton; density: 270 g.; lining: the ripstop fabric, Oxford 600; cuff: Yes; sealing gum: Yes; seasonality: demi; optional: reinforced insert, a removable fleece-lined boots on his trousers, suspenders included

Jacket combined(stitched and removable) insulated lining, removable insulated hood, removable faux fur collar. The jacket is cropped, straight leg. Front zip detachable two-way zipper, closed windproof flap with buttons. Collar turn-down with snap closure-patoy on a textile fastener. In the shoulder seams are on the buttons with removable fullpagename for attaching insignia. Shelves and back with flirt. On line coquettes – edging of red. Two chest pockets with flaps with buttons and textile fasteners "vel'kro". Two side pockets with flaps on buttons and textile fasteners "vel'kro". The burlap patch pockets Welt pockets at "lightning". At the bottom of the cutting zone, the volume of which is adjustable by side panels with elastic tape stitched on multi-needle spec. machine with chain stitch. Vtachnoy sleeve, double seam. On the right sleeve Welt pocket on "lightning". Inside pocket sewn headband with reflective tape, fastened with the Velcro fastener "vel'kro". On bottom of sleeves stitched cuffs with elastic tape stitched on multi-needle spec. machine with chain stitch. Stitched insulated lining with insulation "Fiberteck-200" on the inner side of the left shelves is under the gun pocket ( with a carabiner on the cord to fasten the gun ), and patch pocket with vertical zipper. Removable insulated hood detachable fastened on zipper. The volume is adjustable on the back of the neck and face. The chin part fastens with the Velcro fastener "vel'kro". Detachable collar made of artificial fur that contains fiber "Kanecaron" (Production Japan) is fastened on the separable zipper. Removable insulated lining (vest) of insulation "Fiberteck 150" quilted on both sides with lining fabric, detachable snap-on "lightning". Removable insulation is patch pocket with a horizontal entrance on "lightning". Fiberteck insulation has several advantages over traditional fillers:- Keeps its shape and restores it after washing. - Allowed multiple washing and drying. - Provides greater heat-shielding effect compared with other materials of similar thickness and density. - Humidity resistant. - Sustainable in the long run. - Is environmentally friendly and non-toxic insulation. - Practical in terms of price and quality.

Winter jacket, THE 2012.

Material: the wool -Classic pants with piping on side seam. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging red

Set of windproof smoke (jackets) and warm with the liner of Primaloft® insulation Black, which can be worn separately as a standalone jacket Smoke: Can be worn with or without podstezhkoy High and wide of the goal. Hood with visor, which is inserted in the plastic to give rigid form. For careful adjustment of the hood has three adjustment Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper Cuffs with Velcro for fine adjustment of the circumference of the wrist Valve front zipper and pockets fastened with canadian (on tape leg) buttons, which have greater reliability than with conventional buttons. are large in size, making them convenient to operate in thick gloves Voluminous pockets on the torso are of the bend entrance, protecting the contents from falling out Pockets: 2 large pockets on the chest 2 large pockets at the bottom of the jacket 2 pocket "Napoleon" with zipper on the chest one flat pocket on the left sleeve and one inner left zip Laces: at the waist and bottom of jacket, with elastic cords for protection against the cold under clothing Undercoat: Quilted lining with insulation that extends the life of clothing (insulation remains in place when cleaning or washing) Fastening to the smoke and buttoning when wearing as a separate jacket, are made with the help of convenient lenticular buttons of the American model Hood, adjustable oval face. For comfortable wear the inner part of the hood trimmed with fleece Vents on the armpits Knitted cuffs for comfort Inner left pocket zipper The material of products: The main fabric smoke: Strong (high-density differs from the counterpart used in the form of an Alloy), 35% cotton, 65% polyester Lining smoke: thin blended fabric, 35% cotton, 65% polyester The main fabric of the liner: 100% polyester Insulation liner: body - Primaloft® Black 2×133 g/m2 sleeves - Primaloft® Black 2×80 g/m2 Product weight: 46/176 R-R – 1969 50/176 R-R – 2097 g 54/182 R-R – 2181 g 56-58/188-p – 2439 g The website also presents the model of pants with insulation Primaloft® YOU MAY BE INTERESTED IN:

Without Velcro under the chevrons. The size is given on the collar. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon

Women's demi-season raincoat is part of the uniform of the police of a new sample. Cloak semiadherent silhouette, with a Central courtyard, a hidden zipper on five loops and buttons and an additional button shaped top and through the loop sewn on stitched insulated lining. On the quaint in the shoulder seam is provided by two belt loops, one slit and not a loop for securing detachable shoulder straps. Vtachnoy sleeve, double seam. In the lower part of the middle seam of the sleeve vacany stalemates, fastened with loop and button shaped. Turn-down collar, with a cutting counter. Removable belt fed through the belt loops located at side seams and fastens with a buckle with a tongue, the free end, which is fed through the belt loops. For the right selection - internal Welt pocket with leaflets. Fabric jackets (100% polyester) with threads of the weave rip-stop and water-repellent impregnation. The second layer of the membrane. Filler: Thinsulate 100 g/m. Recommended temperature range: from +10°C to -12°C. Worn with a neck scarf in dark blue or white scarves. Permitted the wearing of a neatly-folded coat demi nicevoicelady out on the left hand. The demi-season coats are buttoned up. Permitted the wearing of coats demi-season with the upper button unfastened. Coats demi-season wear with removable insulation with or without buttoned buckle belt. This cloak is worn removable shoulder straps dark blue stripe and dark blue.

Thanks to innovative technology and quality materials, provides maximum protection from rain and wind, you'll be in constant comfort that helps reduce fatigue throughout the day. Features Protection from rain and wind Share cut Upper material: Rip-stop Insulation: Thinsulate

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

Material: Polyester 65% , 35% The fabric is very resistant to fading Weave: Twill 2×1 Fabric weight: 245 g/m2 Dyeing fabric: Dispersion-active, by Japanese technology, superiority WR - odottamassa finish

BOOTS WITH HIGH BERTSAMI Top: natural chrome leather (1.4 – 1.6 mm) Lining: the natural sheepskin. Sole: TEP (±40°C), 3521. Method of attaching soles: glue stitching. Arch support: metal Toe and heel: from reinforced thermoplastic material. Dimensions: 36-50. Semi-deaf valve. Padded collar. Color: black Weight: 730 gr. Modifications: Model 180 fake fur.

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

Material: gabardine -Women's pants with piping on side seam. -The volume of the belt is regulated by side panels with elastic braid. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging of red color

fabric gabardine for employees of state fire service of EMERCOM, the colour is grey-blue. According to the Order of the Ministry of emergency situations, should have smoothed longitudinal folds.

The cap of the Ministry of defence (office).  Cap made of ripstop fabric, olive color. According to the provisional regulations No. 256/41/3101. On caps and caps is a sign of distinction on belonging to the bodies of Executive power where the law provides military service (the cockade of Golden color), high-ranking officers, in addition, the visor and the cap band with sewing Golden color.

The suit includes pants and. The jacket is straight cut. Stand – up collar, adjustable volume, patoi on a textile fastener. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. The pockets are tilted, the hands. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener, with belt loops ribbon belt from the inner side of the valves. In the elbow pads-amplifiers with input protectors on textile fasteners. At the bottom of the sleeves – pockets for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with hidden button closure.In the area of seat trim amplifier Fabric: Mirage-210, PE-67%, CL-33%

The classic model You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% Polyester 35% Viscose Attention! At the moment it is available in two versions: - with Velcro-base (loop) for Chevron - without the basics Please when ordering to specify the desired variant.

Fabric: "Panacea" Composition: 67% polyester, 33% viscose 155 g/m2 The costume consists of trousers and Jacket straight cut:-turn-down collar;-Central zip closure covered by a windproof plank;-2 patch pockets with flaps on the chest;-2 patch pockets with flaps on the sleeves with Velcro;amplifiers on the elbows made from the main fabric; Pants straight cut-Central zip closure;-six belt loops under the belt on the belt;Side -2 side pockets, 2 side overhead volume pockets and 2 patch pockets with flaps rear;amplifiers on the knees of the base fabric.

ASSAULT BOOTS URBAN TYPE Top combo: natural chrome leather (1.2 – 1.4 mm)+ soft edging and an elastic valve genuine leather. Lining: the mesh is laminated. Sole: rubber with increased wear resistance (Italy), BUTEK 1. Method of attaching soles: adhesive. Arch support: metal. Toe and heel: from reinforced thermoplastic material. Dimensions: 40-46. Semi-deaf valve. Padded collar. Color: black.  Weight: 580 gr.

The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt adjusts to fit with side elastic 2 pockets on the chest Material: 65% 35% Rayon

Jacket in the style of "Retro" Buttons Hood, adjustable oval face Elastic band on waist and bottom of sleeves The bottom adjusts to fit with cord 4 external pockets Material: 100% cotton YOU MAY BE INTERESTED IN: "And often in the evenings, in the evenings, when I feel a sense of comfort, blow suddenly crackling fires from the blue edge of the gas ring stove..." ( B.Vahnjuk) When using home, we buried the face in jackets hanging on a hanger, and breathed in the smell of fire. In stormovik went on any trips at any time of the year. They didn't prokusyvanie mosquitoes, it was not insufflated, does not melt from campfire sparks. Really from freezing, slowly dried up and were too heavy. Now, when there was plenty of light modern canvas jackets real jackets are found quite rarely. But now for the forest fire and it is better not to find. Synthetic fire doesn't like. And if you don't want your favorite fleece was on small (or large) hollow-it's time to think about the tarp. Jacket "Retro" style made of high quality canvas. It is very durable, breathes well. And generally pleasant and loved as songs Vizbora on reel-to-reel recorder. Adjustable oval face hood, stretch sleeves and tightening down jackets protect and wind. Matches, compass, map and other necessary items will easily fit in four voluminous pockets. If you like watching the sunrise on a steep Bank, wander through the summer tundra, to gather cloudberries and cranberries in the bogs, singing evenings around the campfire – this jackets for you.

Top: natural chrome leather (1.4 – 1.6 mm). Lining: the natural sheepskin. Sole: TEP (±40°C), 2050. Method of attaching soles: glue stitching. Arch support: metal. Toe and heel: from reinforced thermoplastic material. Dimensions: 36-50. Deaf valve protects the foot from impact the environment (dust, water, dirt). Hooks. Padded collar. Color: black. Weight: 840 gr.

Staff costume consists of pants and shirts with short sleeves, made of lightweight fabric that does not crumple, does not fade and does not lose its shape even after numerous washings.

Staff costume consists of pants and shirts with short sleeves, made of lightweight fabric that does not crumple, does not fade and does not lose its shape even after numerous washings.

Straight silhouette, length to mid-thigh Hood with detachable fur, adjustable volume and oval of the face Insulated with two layers of batting, which is 270 g/m2 The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Windproof inner and outer flaps covering the front zipper; the edge of the hood; high collar and bottom of sleeves, adjustable in size through Velcro with inner knitted cuff prevents penetration of the cold under clothing Windproof and flap pockets on the chest are fastened by large buttons that are easy to use with gloves on Pockets: two pockets on the chest and two on the sleeve two inside pockets four pockets at the bottom of the jacket Laces: waist and bottom of jacket Material: 100% polyamide with coated Product weight: 46/176 R-R – 1140 g 50/176 R-R – 1207 g 54/182 R-R – 1302 g 58/188 R-R – 1430 g Designed as a battle jacket that involved a serious of tests and trials, experiencing bursts of popular worship and periods of cooling, it is returned to us calm and confident in its reliability, functionality and durability. Warm, durable, windproof and water-repellent due to the used in the manufacture of fabric (100% polyamide with coating), Alaska provides all-around protection from snow, wind, moisture and cold. Insulation – two layers of synthetic fiber padding polyester (270 g/m2), which, unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. Typical of "Alaska" with a fur edge, in combination with a high collar that closes when you need almost all face, and is adjustable in volume and oval of the face. The edge, is made from natural or artificial fur (of your choice) can come unfastened from the hood. The inner part of the gate and in contact with the face edge of hood trimmed with soft fleece. A major barrier to wind and cold are also windproof external and internal valves two-way front zipper, utgivelsen cord waist and bottom of jacket. Sleeves with inner knit cuffs are regulated armors Velcro. Length (mid-thigh) allows you to be long in the cold, and the loose fit does not restrict movement. Large allow you to unbutton the jacket with the gloves. Voluminous, warm front pockets are covered with soft knitted fabric, and the large upper pockets allow you to undo them with gloves on. Except for the six front pockets, two pockets on the sleeve and two internal. Warm comfortable long stay in the cold.

Patent No. 46636. from the upgraded version of the Soviet hopping suit for special forces, known as "Mabuta". Recommended for security services Free, not hampering the cut In the suit used stainless button Too high waist for comfort and ease of carrying ammunition on the belt. The sides of the belt potrasenoy The loops wide waist belt Reinforcing pads on the knees Folds in the knees for anatomical cut Zipper fly The belt fastens with two buttons The bottom of the pants Podrabinek, inside sewn covers are made of thin cotton calico. The anthers are equipped with stripgame of gum. It is recommended to fill in anthers shoes, and the Trouser leg to fit over boots Pockets: pockets on the front thighs with the entrance on top of the two buttons. The entrance pockets is folded to protect the small content from falling out rear inset pocket on the right side on the two buttons on the right leg side pocket for hook knife or bayonet-knife. Pocket has podrezany entrance, flap on two buttons. Sewn inside the webbing, forming cells for self-fastening of the sheath side inset pockets Material: "Rip-stop": 53% cotton; 47% polyester "Gretta": 53% cotton; 47% polyester "Standard": 60% cotton; 40% polyester Product weight: 46/176-p – 589 g 50/176-p – 654 g 54/182 R-R – 690 g 58/188 R-R – 703 g SIZE: Download Dimensional grid (.xls) to accurately determine the correct size REVIEWS: Review from tankist_sssr YOU MAY BE INTERESTED IN:

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Classic with sewn pockets for gear Rifleman and cells PALS for mounting additional pouches Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings The jacket fastens with a zipper reinforced tractor long skill of braiding. Zipper for secure closed with a strap with Velcro to protect from pollution and removal of the load On the underside of the sewn loops for releasably attaching the unloading/pistol belt Adjusting the size of vest (from 46 to 68) is located on the sides of the lumbar panel and are made using slings and trendeleva buckles Duraflex®, you can adjust the size directly into put on the vest. With each side on three lines. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum Adjustment increase (from 164 to 200 cm) is located on the bottom edge of the Basque is back and with two vertical lines and trendeleva buckles Duraflex® connecting the yoke and lumbar panel. You can set up right for wearing on a vest. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum On top of the flirt-stitched loop slings evacuation and PALS – 6 cells in width, 3 rows in height slings (sewn completely to each other without gaps) On lumbar panel stitched two semi-rings Duraflex® suspension with bread bags on hooks-carabiners and slings PALS – 6 cells in width, and 7 rows in height slings (sewn completely to each other without gaps) Top stitched at shoulders limiters and automatic belt PALS webbing on each shoulder by 2 cells wide, 2 rows of lines in height (with the period) 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme vest pocket sewn to the base so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets for hand grenades on his chest. Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 pocket for fireworks on the right side of the trunk. Open top with elastic walls to protect contents from falling out, to carry 3 RB, or 1 RAD or 1 RDG 1 pocket for the bayonet on the left side of the trunk. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. Can be used for carrying 1 RAD or 1 RDG Pocket for fitting of the rubber bands with a buckle on the button, on the left side of the chest near the main zipper Pocket for personal dosimeter on the right side of the trunk near the main zipper and open top 2 inner pockets for flat items (map, scarf, etcp.) with the input of Velcro, provide short-term protection from moisture On the sides of the torso stitched PALS webbing on each side for 3 cells in width, 3 rows of lines in height (with the period)