Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed wearing summer without a handkerchief in the back office. The length of the lower edge must be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample

Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed to wear summer dresses without a handkerchief in the back office. Dress length at the bottom edge should be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample.

Fabric: Mirage-210, PE-67%, CL-33% Summer suit consists of a jacket and trousers. The jacket is straight cut. Stand – up collar. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. The pockets are tilted, the hands. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener, with belt loops ribbon belt from the inner side of the valves. In the elbow pads-amplifiers with input protectors on textile fasteners. At the bottom of the sleeves – pockets for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with concealed snap closure

The tunic is part of our daily and weekend uniforms of police officers of the new model. Worn with trousers. Material: Suiting (wool blend) fabric. Composition: 75% wool, 25% 280 g/m2 Lining: Twill 100% 105% g/m2. Adjacent cut, single breasted, fastened with four buttons. Turn-down collar with lapels. Shelves with cut barrels. Horizontal Welt side pockets in the "frame" with the valves. Back with a Central seam, in the lower part there is a slot. Vtachnoy sleeve, double seam. Jacket with leather sleeves. The left side of the lining is the inside pocket with "leaflets". Is designed for employees of internal Affairs authorities with special ranks of police, and also for the cadets (listeners) of educational institution of higher professional education of Russia. Has red trim on the sleeves. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. In addition, at this sewed epaulettes with buttons, and reinforced two lapel badges. How to sew a shoulder strap? To do this, except for the jacket and a shoulder strap, you will need a ruler, scissors, needle, thimble and strong thread red. Be sure to wear a thimble, even if you are used to sew without it, because sometimes through the needle passes with great difficulty, and could injure your fingers. If you have difficulty pulling the needle and thread from the shoulder strap, you can use the pliers or tweezers. 1) First, prepare the shoulder straps, E. attach all required insignia, as to do it on the already sewn the race will be much harder. 2) Take a shoulder strap and have it so that the side, remote from the closure, was in the fence to the seam that joins the shoulder of his tunic sleeve. At the same time, top aimed toward the back, the edge of the chase got 1 cm to go on top of the seam running along the shoulder. In other words, the shoulder straps should be slightly shifted forward. 3) Pass the needle and thread secure the shoulder straps to the jacket at three points: at the corners of the chase, at the place where he comes into contact with the sleeve seam and in the center of a semicircular cut. Now the shoulder straps will be secured and will not shift from the correct position in the process of sewing. 4) Then very carefully sew the shoulder straps around the perimeter, making the stitches so that on its surface could only barely visible dots at the places where the needle enters the ring, and the thread between two adjacent holes were mostly on the wrong side (the lining) jacket. Then the thread will not be noticeable even if it the color does not quite match the color of the shoulder straps. The optimal length of each stitch should be about 1 cm. 5) With the second shoulder strap follow the same pattern. How to strengthen the lapel badges? On the collar of his jacket is on the bisector (the line that divides the angle of the collar in half), at a distance of 25 mm from the corner of the collar to the center of the logo, the vertical axis of symmetry of the logo should be parallel to the departure of the collar. How to place awards on the police uniform? On the left side of the chest awards are in the following order: A special sign of distinction are arranged so that the upper edge pads the medals was at the level of the ledge of the lapel of his tunic and jacket. When wearing two or more special characters differences, they are separated in one row, from right to left at intervals of 10 mm between the side ends of the stars in the order listed. A special sign of distinction of one denomination are placed in the order of their awarding. Signs of orders, decorations and medals are laid out horizontally in a row from the center of the chest to the edge, from top to bottom in the order listed. When wearing two or more orders or medals of their pads together in a row on the common plank. Medals that does not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in the above order. Pads orders and medals of the second row should go under orders and medals of the first row, the upper edge of the Shoe bottom row is placed at 35 mm below the pads of the first row. Subsequent rows are arranged in a similar manner. Signs of orders, decorations and medals are on the jacket single breasted police so that the top edge of pads of the orders and medals of the first row located below the level of the ledge of the lapel on 90 mm. On the right side of the chest awards are in the following order: Order are arranged left to right in the order listed. The upper edge of the maximum size of the order of the first row are arranged at the level set for overall straps (pads) of the first row of orders and medals placed on the left side of the chest. Orders that do not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in order. The centers of orders in a series must be at the same level. The distance between the orders and ranks of the order of 10 mm. The sign of the number of injuries from lace Golden color (if severe injury) or dark red (light wound), you'll be on the strip of fabric top products. Width of braid 6 mm, length 43 mm. Stripe of the critically injured is located below the stripe on minor injuries. The distance between stripes of 3 mm. The sign of the number of wounds placed on the tunic and jacket to the right of the sign to honorary titles of the Russian Federation, and in his absence, in his place.

The jacket is cropped, straight leg. Fabric - gabardine. Is designed for employees of internal Affairs authorities with special ranks of police. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. Front zip detachable "zip". Turn-down collar. Shelves with cutting coquettish in the area of the shoulder girdle. On the shelves are chest Welt pockets with scalloped flaps buttoned. Two side Welt pockets in frame with the entry for "lightning". With a stitched back yoke. Basque line laid soft pleats for freedom of movement. Single-seam set-in sleeves with stitched cuffs, fastened with buttons. On the bottom – cap zone, the volume of which is adjustable by side panels with elastic braid. The back and shelf on the lining from knitted fabric (mesh). The armhole is edged with edging tape Straight cut pants. Stitched waistband with six belt loops under the belt. Volume the waistband is adjustable by side panels with elastic braid. Two pockets in the side seams. One Welt pocket with flap with internal zip closure is located on the right rear half of the pants. Along the side seams of trousers inserted edging of red. Is part of the uniform of a police officer of the new sample.

The skirt is shaped for the employees of internal Affairs bodies. Summer option out of lightweight fabrics gabardine. Is a part of everyday forms of employees of internal Affairs bodies. According to the order No. 575, the length of the skirt on the bottom edge should be at knee level.

Jacket combined(stitched and removable) insulated lining, removable insulated hood, removable faux fur collar. The jacket is cropped, straight leg. Front zip detachable two-way zipper, closed windproof flap with buttons. Collar turn-down with snap closure-patoy on a textile fastener. In the shoulder seams are on the buttons with removable fullpagename for attaching insignia. Shelves and back with flirt. On line coquettes – edging of red. Two chest pockets with flaps with buttons and textile fasteners "vel'kro". Two side pockets with flaps on buttons and textile fasteners "vel'kro". The burlap patch pockets Welt pockets at "lightning". At the bottom of the cutting zone, the volume of which is adjustable by side panels with elastic tape stitched on multi-needle spec. machine with chain stitch. Vtachnoy sleeve, double seam. On the right sleeve Welt pocket on "lightning". Inside pocket sewn headband with reflective tape, fastened with the Velcro fastener "vel'kro". On bottom of sleeves stitched cuffs with elastic tape stitched on multi-needle spec. machine with chain stitch. Stitched insulated lining with insulation "Fiberteck-200" on the inner side of the left shelves is under the gun pocket ( with a carabiner on the cord to fasten the gun ), and patch pocket with vertical zipper. Removable insulated hood detachable fastened on zipper. The volume is adjustable on the back of the neck and face. The chin part fastens with the Velcro fastener "vel'kro". Detachable collar made of artificial fur that contains fiber "Kanecaron" (Production Japan) is fastened on the separable zipper. Removable insulated lining (vest) of insulation "Fiberteck 150" quilted on both sides with lining fabric, detachable snap-on "lightning". Removable insulation is patch pocket with a horizontal entrance on "lightning". Fiberteck insulation has several advantages over traditional fillers:- Keeps its shape and restores it after washing. - Allowed multiple washing and drying. - Provides greater heat-shielding effect compared with other materials of similar thickness and density. - Humidity resistant. - Sustainable in the long run. - Is environmentally friendly and non-toxic insulation. - Practical in terms of price and quality.

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

Women's demi-season raincoat is part of the uniform of the police of a new sample. Cloak semiadherent silhouette, with a Central courtyard, a hidden zipper on five loops and buttons and an additional button shaped top and through the loop sewn on stitched insulated lining. On the quaint in the shoulder seam is provided by two belt loops, one slit and not a loop for securing detachable shoulder straps. Vtachnoy sleeve, double seam. In the lower part of the middle seam of the sleeve vacany stalemates, fastened with loop and button shaped. Turn-down collar, with a cutting counter. Removable belt fed through the belt loops located at side seams and fastens with a buckle with a tongue, the free end, which is fed through the belt loops. For the right selection - internal Welt pocket with leaflets. Fabric jackets (100% polyester) with threads of the weave rip-stop and water-repellent impregnation. The second layer of the membrane. Filler: Thinsulate 100 g/m. Recommended temperature range: from +10°C to -12°C. Worn with a neck scarf in dark blue or white scarves. Permitted the wearing of a neatly-folded coat demi nicevoicelady out on the left hand. The demi-season coats are buttoned up. Permitted the wearing of coats demi-season with the upper button unfastened. Coats demi-season wear with removable insulation with or without buttoned buckle belt. This cloak is worn removable shoulder straps dark blue stripe and dark blue.

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

Straight silhouette, length to mid-thigh Hood with detachable fur, adjustable volume and oval of the face Insulated with two layers of batting, which is 270 g/m2 The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Windproof inner and outer flaps covering the front zipper; the edge of the hood; high collar and bottom of sleeves, adjustable in size through Velcro with inner knitted cuff prevents penetration of the cold under clothing Windproof and flap pockets on the chest are fastened by large buttons that are easy to use with gloves on Pockets: two pockets on the chest and two on the sleeve two inside pockets four pockets at the bottom of the jacket Laces: waist and bottom of jacket Material: 100% polyamide with coated Product weight: 46/176 R-R – 1140 g 50/176 R-R – 1207 g 54/182 R-R – 1302 g 58/188 R-R – 1430 g Designed as a battle jacket that involved a serious of tests and trials, experiencing bursts of popular worship and periods of cooling, it is returned to us calm and confident in its reliability, functionality and durability. Warm, durable, windproof and water-repellent due to the used in the manufacture of fabric (100% polyamide with coating), Alaska provides all-around protection from snow, wind, moisture and cold. Insulation – two layers of synthetic fiber padding polyester (270 g/m2), which, unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. Typical of "Alaska" with a fur edge, in combination with a high collar that closes when you need almost all face, and is adjustable in volume and oval of the face. The edge, is made from natural or artificial fur (of your choice) can come unfastened from the hood. The inner part of the gate and in contact with the face edge of hood trimmed with soft fleece. A major barrier to wind and cold are also windproof external and internal valves two-way front zipper, utgivelsen cord waist and bottom of jacket. Sleeves with inner knit cuffs are regulated armors Velcro. Length (mid-thigh) allows you to be long in the cold, and the loose fit does not restrict movement. Large allow you to unbutton the jacket with the gloves. Voluminous, warm front pockets are covered with soft knitted fabric, and the large upper pockets allow you to undo them with gloves on. Except for the six front pockets, two pockets on the sleeve and two internal. Warm comfortable long stay in the cold.

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!

The suit includes pants and. The jacket is straight cut. Stand – up collar, adjustable volume, patoi on a textile fastener. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. The pockets are tilted, the hands. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener, with belt loops ribbon belt from the inner side of the valves. In the elbow pads-amplifiers with input protectors on textile fasteners. At the bottom of the sleeves – pockets for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with hidden button closure.In the area of seat trim amplifier Fabric: Mirage-210, PE-67%, CL-33%

Tactical shirt MPA-12 is designed to be worn with body armor in hot weather. The combination of nylon and cotton that provide maximum comfort, eliminating the formation of wrinkles, and unrestricted freedom of movement. FEATURES FOR HOT WEATHER FOR HEAVY LOADS MATERIALS NYLON 65% POLYETHYLENE, 35% COTTON

ASSAULT BOOTS URBAN TYPE Top: hydrophobic leather (1.2 – 1.4 mm), "DRYWALKSYSTEM" (R) (ZAO "RUSSKAYA KOZHA") Lining: printed fur wool (Merino). Sole: 2-ply (rubber + PU), BUTEK 3. Method of attaching soles: adhesive.                                Toe and heel: from reinforced thermoplastic material. Dimensions: 40-46. Deaf valve protects the foot from impact the environment (dust, dirt). Speed lacing. Color: black. The toe part is reinforced PU leather vysokoprochnykh coating "matrix", (Italy). Weight: 600 gr.

The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt adjusts to fit with side elastic 2 pockets on the chest Material: 65% 35% Rayon

The costume of the MPA 21 is a summer camouflage suit The camouflage suit does not restrict movement,person, very easy and comfortable. Used by tribalistas, military, hunters and lovers of active style of rest The costume consists of a jacket and trousers. Straight cut jacket with a stitched hood, consisting of several parts, with side inserts of knitted fabric (mesh). The volume of the hood on the front adjustable neck cord. The Central buckle jacket button - "Canada" attached braid. Shelf with chest pockets and side pockets volume. Pockets with scalloped flaps buttoned Canada. The entrance to the pockets is inclined. On the waist line, from the inner side nastrojka slide with elastic tape for volume control. The ends of the elastic tape secured by stitching. Combo sleeves, loose fit. In the elbow pads are amplifiers. At the bottom of the top part of the sleeve of the back side there are vent inserts made of knitted fabric (mesh). Camouflage sleeves with cuffs at the wrist area, with a hole for your thumb. Scribbled on the back 18 of the belt loops on nemelka. Pants without side seams with gusset on the seam stepper. Stitched waistband with six belt loops under the belt, with hinged loops for attaching suspenders. Volume the waistband is adjustable with elastic tape on the lateral parts. The belt and codpiece fastens with buttons. Pants with side pockets located in the joints of the lining-amplifier and rear pockets with scalloped flaps buttoned Canada. Burlap pockets forms a trim-amp. On the front parts of trousers in the knee area are lining-amplifiers.The bottom of the pants pulled elastic tape. Fabric: "Panacea" Composition: 67% polyester, 33% viscose 155 g/m2

Fabric: Jackets membrane rip-stopComposition of raw materials of the fabric :Layer 1: 92%polyester, 8% spandex vodohranilische with Teflon impregnation.2 layer: membrane 10000WRP/5000MVP.3 layer: the mesh is 100% nylon.Insulation: "Fibersit" 150 g/m2 .Color: Python-ScalaDescription: The costume consists of a jacket and trousers,with external water-repellent layer of fabric on the membrane,with insulation Fibersit.Jacket:-long,non-removable hood,removable insulating jacket.-Front zip detachable two-way "zipper";-hood:with a removable visor,adjustable along the face cut;-upper front and side pockets with vertical entrance, "lightning";-lining is a removable jacket for another layer of insulation Fibersit.Pants:-removable insulated spacer,insulated with a wide belt and shoulder system for discharge of elastic tapes;-the front halves of trousers with pockets and the vents on "lightning";-the knee pads-amplifiers;bottom side seam zipper;-inside bottom hem of pants with knitted cuffs wristlets.

Natural chrome leather (thickness 1.4 – 1.6 mm). Lining: natural fur. Sole: rubber anti-skid system ALPI ROTOR.

Durable and elastic, warm and comfortable pants anatomical cut designed to maintain a comfortable body temperature in the cold season during active physical exertion, in bad weather, with the wind and rain. Features For heavy loads Protection from rain and wind For outdoor activities Protection from the cold

SHOES Top: natural chrome leather (1.2 – 1.4 mm). Lining: nonwoven abrasion resistant and fast drying(high-density 150g/m.square) Sole: TEP (±40°C), 128. Method of attaching soles: adhesive. Arch support: metal. Toe and heel: from reinforced thermoplastic material. Dimensions: 40-45. Color: black. Weight: 420 gr.

The classic model

BOOTS WITH HIGH BERTSAMI Top: natural chrome leather (1.4 – 1.6 mm) Lining: genuine sheepskin Sole: TEP (±40°C), 2050. Method of attaching soles: glue stitching Arch support: metal Toe and heel: from reinforced thermoplastic material . Dimensions: 40-47. Deaf valve.On the inside berets clasp “The flash". Color: black. Weight: 845 gr.

Durable and elastic, warm and comfortable pants anatomical cut designed to maintain a comfortable body temperature in the cold season during active physical exertion, in bad weather, with the wind and rain. Characteristics For heavy loads Protection against rain and wind For outdoor activities protection from the cold

Men's shorts fabric FielSensor® by Toray. Fabric: FielSensor® Product weight, g: 80 Density g/m2: 135