The classical model of the armed forces Worn worn outside You can use fanspage Zipper The belt is adjustable in size using the side elastics Pockets: 4 external pockets 2 inside pockets Materials: 100% cotton YOU MAY BE INTERESTED IN: Officers at all times sacredly cherished the honor of the uniform. On the courts of officer honour were legendary, and the word of the officer constituted irrefutable proof. Introducing "Jacket and field officer". Made of breathable cotton fabric, the form is not tiring in the heat or motion and irritate the skin. Shaped jacket with zippers worn outside their trousers. Four outside and two inside pockets allow to place all necessary. Provided the use of fanspage. The belt is adjustable. Classic wide with three pockets and belt officers belt. We hope that the "Jacket and field officer" little to do you harsh everyday life.

The classical model of the armed forces Classic style The loops wide waist belt 2 side pockets and 1 back pocket Material: 100% cotton The officers of the army before the revolution piously protected the honor of the uniform. On the courts of officer honour were legendary, and the word of an officer is law and irrefutable proof. Our field officers form honour drop is simply impossible! Introducing "Jacket and field officer". Made of breathable cotton fabric, the form is not tiring in the heat or motion and irritate the skin. Shaped jacket with zippers worn outside their trousers. Four outside and two inside pockets allow to place all necessary. Provided the use of fanspage. The belt is adjustable. Classic wide with three pockets and belt officers belt. We hope that the "Jacket and field officer" little to do you harsh everyday life.

Suit for the armed forces Jacket: Worn worn outside You can use fanspage Buttons Kick patches on the elbows Cuffs with putty (tissue box) on the sleeve to protect from dust and dirt Pockets: 2 pockets on the chest and 2 at the bottom of the jacket 2 inner pockets and 2 sleeves Pants: Arrows stitched The loops wide waist belt Reinforcing pads on the knees The bottom of the trousers is adjustable in size by means of a cord The pants bottom with a strap, adjustable in height, which does not allow them to creep up 2 side pockets The material of products: "Rip-stop": 53% cotton; 47% polyester Product weight (jacket): 50/182-p – 713 g 54/170 R-R – 694 g 56-58/182-p – 736 g Product weight (pants): 50/182 R-R – 528 g 54/170 R-R – 505 g 56-58/182-p – 557 g Attention! The suit made according to military SPECIFICATIONS. The size of the suit involves "tight" fit

Multifunctional accessory, made on seamless technology, protects against sun rays and wind The fabric dries quickly, ideal for active sports A large number of rascvetok and use cases allow the use of MULTI-bandana as a fashion accessory that complements any suit Materials: 100% modified polyester Size in flat form: 25×47 cm Weight - 35 g Use cases: Manual: It is possible to use as a retention bandage: REVIEWS: Review the website "Russel" Review from Green7-62

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 25 g Size: 12,5×5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerCompact pouch with Velcro, specially designed to carry the most popular models of multitools (LEATHERMAN®, SOG®, Victorinox SwissTools, etcD.) or small gas canister. With adjustable height and lateral utjazhki. You can also use for carrying shopping 1-2 PM, various small pocket knives, flashlights, and sop. items (dimensions – height about 9.5-13.5 cm, diameter 3 cm). Not compatible with modern shops pistols type AES, APS, Glock 17, SIG-Sauer P226 (too high), it is recommended to purchase a Pouch under the pistol store Mount: one removable clip, batteries not included. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase one clip of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed to fit the multitool. No pockets under the bit sets, extension cords etcp. accessories, only separately multitool The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch Peeps at least 2.5 cm of the height of the multitool or pepper spray, which is convenient for its removal The cross section of the pouch is dragged 35 mm sewn elastic band. Due to the tightening object tightly held in the pouch even when open the valve The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible squares when adjusting for items of different heights At the end of the valve 1 cm skill for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion Review from Green7-62 YOU MAY BE INTERESTED IN:

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 258 g Size: 25,5×16,5×12.5 cm (minimum height is specified) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerLarge rear pouch for the insert buckle with protection of small contents from falling out and height adjustment. For large load. Convenient to increase the quantity of backpacks and Luggage/unloading on utilitarian systems. Can be used as a fallback to carry the 100-machine gun cartridge box or ribbons (it is recommended to use more durable and rigid specialized the pouch). Inside shirokogorloy two standard 1l Nalgene bottle or equivalent from Alloy Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height. The presence of clips throughout the rear area of the pouch without empty spaces can confidently carry great weight, the pouch tight to the platform The tube of light fabric 210d Oxford, protects the contents of a small pouch from falling out, allows to increase the height of the pouch (6 cm high). Tightening the paracord and lock Duraflex®. The exit of the cord from the edges of the tube reinforced with a braid and multiple bartacks, eyelets are not used, K. they are due in the field Cover complex shapes, protects contents from dirt and water, covers the tube at any height Hooks on the insert buckle Duraflex®, ability to adjust. Paternal fastex sling continues down the bottom to the back wall, forming a frame. Also this means very much to pull the volume of the pouch. To lanyard fastex does not SAG, it is passed though the sewed to the front wall of the pouch loop made of horizontal lines. The size of the loop large enough to easily pass through it fastex, without removing it from the lines The corners of the bottom rounded Outer side surface is sheathed cells PALS for mounting additional pouches (e.g., pouch utilitarian zipper 3x3). 3 cells in width, 3 rows in height on each side All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 176 g Size: 21,5×10,5 (specified minimum height) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerNon-insulated case for carrying shirokogorloy 1l Nalgene bottle (including non-standard cap), its equivalent from Alloy – jar TR-1000, thermoses SY-750 and SBM-750, and other cylindrical objects of similar dimensions. Also accommodates adequately American military canteen, Nalgene OASIS canteen 1 QT and TR M-1000. The pouch can be used as a fallback to carry two 8-charging shops saiga/Vepr-12, or a stove JetBoil Flash Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The pouch entirely from two layers of fabric Cordura® 500d for durability and maintaining rigid form Cover complex shapes, protects contents from dirt and water. Fastens with adjustable fastex, the parent of which is attached to the surface of the fabric. The installation location of the fastex enhanced inside the second layer of fabric. Due to the adjustment can use non-lid, increasing the height of the bottle, such as Nalgene OTF LID or MULTI-DRINK REPLACEMENT. It is recommended to tighten the fastex sling to prevent rocking of the bottle when walking The pouch and the lid have a circular cross-section, is free for unimpeded placement inside the Nalgene bottle with a plastic on its bottom with a suitable glass (e.g. Tatonka Handle Mug) and camp utensils (spoons, forks). Cutlery should be laid vertically along the corners of the rear wall of the pouch On the underside of the top cover stitched flat pocket for small items. It is easy to carry tea bags or instant coffee and disinfectant tablets The outer surface is sheathed cells PALS for mounting additional pouches. 7 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. Vertical lanyard fastex freely passed though the upper middle cell PALS. When using odnomarshevoy American jar sling should be put on top of the cell, K. requires strong tightening of the pouch height All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion The review of the prototype from Green7-62 YOU MAY BE INTERESTED IN:

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×17,5×3.5 cm Weight: 127 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock 2 of shingles under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: two or four removable clips, not included. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase two or four identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit stores. It is recommended to place the stores cover up Pockets separated by a tiny gap, widening the stores relative to each other. This allows you to clenching your fingers separate store on the sides without interference from a nearby store. In addition, it protects the stores from the collision Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around the upper sling UniClick). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the shop, independent for each of the two pockets of the block. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pockets of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the shops, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when mounting them on top of the same block 2 of shingles BCC/M4 single shingles or BCC/M4, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of shops without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) zip up pouch in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion

All sizes: 36-41 Material: EVA (ethylene vinyl acetate). Filler: fur 100% wool/ Knitted fabric with the addition of special hydrophobic fiber/fabric made of linen and wool/Foil metallisers packing weight kg: 1.16 packaging dimensions see: 41*41*14 With her husband on a fishing trip, a walk with the child, to the supermarket for groceries, take the dog? Whether on the street at least -40° C, the frost you will transcend! Believe me, women's winter boots may also be incredibly warm and very comfortable, and at the same time look stylish. No matter whether you leave for 5 minutes to the store or going to spend in the cold for several hours, be certain these are the boots you will not freeze. They are very comfortable, like Slippers, like you never even left the house!   Leg opening Shaft height Compliance with the size Winter boots WOODLAND EVA -45 (990-45)       R.36-37 43 27 37 R.37-38 43,5 27 38 R.38-39 45 27 39 R.40-41 46 27 41 Women's boots from EVA (frost resistant material). Cuff boots, made of waterproof Oxford cloth . Equipped with removable stocking is made of 6 layers of natural materials with additional reinforcement of the heel part. The heat temperature is maintained until -45S

Weight: 1,52 kg. Waterproof: 5000 mm. a water column. All sizes: 230х120 see Height: 130 see Warranty: 6 months. Frame: durapol. Floor material: reinforced polyethylene. The material of the outer: 100% polyester 190T/75D 5000 mm of water. article Rip-stop. Finishing seams: taped. Features: The floor transforms into a wall. packing weight kg: 1.52 WoodLand tent Fishing Tent - tent-tent for fishing lovers.  Protects from sun, wind or rain. • Single layer tent-canopy specially designed for fishing. • A floor made of reinforced polyethylene is transformed into the wall of the tent in case of heavy rain. • Compact design and light weight. • Two ventilation hole. • Pockets for small items. • External awning of tent is resistant to UV radiation, wind and rain. • Taped seams special tape to protect from penetration of moisture inside the tent.

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 91 g Size: 13×11×5 cm (including the thickness of the insert buckle) Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer1 pouch to store SVD/carbine "Tiger" on the fastex. Replaces Pouch to store the SVD (Ref.2). Compared to the old model pouch has been redesigned from scratch and is more user-friendly design Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation Suitable for 8-charging shops saiga-308 and Tigr-308 The pouch is sewn entirely of two layers of fabric Cordura® 500d Fastens with Duraflex fastex®, the parent part is installed on the front wall of the pouch. The installation location of the fastex enhanced inside the second layer of fabric. Fastex opens silently easy to handle In the front wall of the pocket between the two layers of fabric Cordura® 500d sewn a piece of plastic. It supports the shape of the pocket, facilitating the introduction and extraction of the shop From the main compartment of the pouch Peeps at least 2.5 cm in height store the SVD, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the retrieval of the store All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 58 g Size: 14,5×10×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 pouches with Velcro for shops to modern pistols (TL, APS, Glock 17, SIG-Sauer P226, etcD.). With adjustable height and lateral contractions. Can also be used for carrying a variety of large folding knives, flashlights and so onp. items (dimensions – height about 12-14 cm, a diameter of 3 cm). Replaces the old model Unit with 2 pistol pouches under the stores. Not compatible with RM stores and multitools (too short), it is recommended to purchase a Pouch under multitool or small. gas. cylinder Mount: two removable clips, not included. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit shops The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength Each branch looks at least 3 cm in height pistol stores, which is convenient to retrieve them The feature of this product is noticeable (1.5 cm) gap between the branches, whereby between the covers of the two stores formed the gap. It greatly facilitates the extraction of shops, K. allows you to fold the cover store separate fingers without interference from a nearby store The cross-section of each branch is dragged 35 mm sewn elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the ends of the valves 2 cm of manners for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN: