Specifications: Specifications: Fabric 600D Polyester Weight (kg) 0,21 Height-width-depth, cm 28 x 14 x 10 Product information: An indispensable tool for hunters and fishermen who prefer to "go light". is perfect for needed items (binoculars, cigarettes, lighter, whistle, knife, spoon, wobblers, etcD.)

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 400 g Available in three sizes: 46-52, 54-58, 60-64 * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular discharge zone of the raised comfort, the entire length allows mounting of the system of PALS and ALICE. Free saturation pouches depending on task For use inside belt strap is inserted, optional. Recommend straps Universal 50 mm v Universal.2 , the Belt US The belt has six suspension points of the shoulder straps. Compatible with straps "Nemesis-5" v lightweight and Versatile.3, as well as all other straps, with a four - or six-point suspension The suspension straps on semi-rings Duraflex®. Two rear and two front for vertical lines, double on the sides for inclined lines (individual lines for each ring) The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips. It also allows for a small load to wear the belt without the straps The inner surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness At the bottom of the belt on each side there are slots in hiding loop for hanging platforms, and thigh holsters (in these loops is passed is going on inside of belt strap) Feature of belt is that unlike the majority of similar curved belt MOLLE cell suspension of pouches sewn entirely one after the other, without breaks, and can be hung along the entire length of anywhere with a pitch of 37 mm without restrictions

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Instructions for installing belt on backpacks and satchels: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm

Breaking loads: the core cord (Kevlar) - 70,5 kg (+/- 10 kgf) the attachment loops on the ends of the cord is in the range of 52-54 kgs carabiner - 24 kN Conditions of use: humidity operational environment is not limited (to 100%) storage temperature -35o to +80oC use temperature from -25o to +80oC

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Installation instructions belt on and packs: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm

Manufacturer: AG (Switzerland) Material: chromed metal Suspension strap for carrying folding knives About the manufacturer

Breaking loads: the core cord (Kevlar) - 70,5 kg (+/- 10 kgf) the attachment loops on the ends of the cord is in the range of 52-54 kgs carabiner - 24 kN Conditions of use: humidity operational environment is not limited (to 100%) storage temperature -35o to +80oC use temperature from -25o to +80oC

Length 60 cm, carabiner steel

Size 1: waist: 83-108 cm, weight: 760 g Size 2: waist: 90-122 cm, weight: 860 g Materials: nylon, aluminum, steel, polyester Universal tactical belt PETZL KANO for military KANO tactical belt for special forces. Used for carrying equipment and fixing the fighter. Allows to place your gear for transport. Built-in leg straps for rare runs. During normal use of the leg straps hidden inside belt Belt lined with breathable foam Automatic FAST buckle needs no adjustment On a sling for you to hang a gun, knife, ammunition, and soD. Special mount for Serflex handcuffs Textile pocket on the inside of waistband Two mounting points on the back side of the belt to attach the lanyard, restrict access, and to attach the chest harness Straps hidden inside the belt. Used for periodic descents on the rope. Straps with buckles DoubleBack Two lateral attachment points for fixation to an aircraft, helicopter or on the roof

Unloading belt Removable inner strap 3-D mesh lining Mounting points for TT Basic Harness MOLLE System FEATURES: Material: Cordura® 700 DEN   Cub   Black   Khaki The manufacturer's website: www.tasmaniantiger.info

Unloading belt Removable inner strap 3-D mesh lining Mounting points for TT Basic Harness MOLLE System FEATURES: Material: Cordura® 700 DEN   Cub   Black   Khaki The manufacturer's website: www.tasmaniantiger.info

Unloading belt Removable inner strap 3-D mesh lining Mounting points for TT Basic Harness System FEATURES: Material: Cordura® 700 DEN

Length 60 cm, carabiner steel

Description: Useful pouch for storing field recordings Features: Weight : 100 g Size : 20x14x2 cm Material: Cordura 700 DEN Technology: zipper around the perimeter compartment for pencils Velcro included in side pocket BW/BDU

Recommended for SPM with extra side handle

Description: Holder for the belt. Features: Weight : 10 g Size : 6x2x2 cm Material: Polyester Webbing

Length 60 cm, carabiner steel

Molded variant of the case for carrying standard handcuffs There is a mount for the key

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Installation instructions belt on and packs: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Installation instructions belt on and packs: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm

Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Instructions for installing belt on backpacks and satchels: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm

Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 400 g Available in three sizes: 46-52, 54-58, 60-64 * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular discharge zone of the raised comfort, the entire length allows mounting of the system of PALS and ALICE. Free saturation pouches depending on task For use inside belt strap is inserted, optional. Recommend straps Universal 50 mm v Universal.2 , the Belt US The belt has six suspension points of the shoulder straps. Compatible with straps "Nemesis-5" v lightweight and Versatile.3, as well as all other straps, with a four - or six-point suspension The suspension straps on semi-rings Duraflex®. Two rear and two front for vertical lines, double on the sides for inclined lines (individual lines for each ring) The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips. It also allows for a small load to wear the belt without the straps The inner surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness At the bottom of the belt on each side there are slots in hiding loop for hanging platforms, and thigh holsters (in these loops is passed is going on inside of belt strap) Feature of belt is that unlike the majority of similar curved belt MOLLE cell suspension of pouches sewn entirely one after the other, without breaks, and can be hung along the entire length of anywhere with a pitch of 37 mm without restrictions

Poiana convenient bag for every day Designed for carrying documents, money and small items Has three compartments

Poiana convenient bag for every day Designed for carrying documents, money and small items Has three compartments

Specifications: Specifications: Fabric 600D Polyester Air Mesh Weight (kg) 0,45 Height-width-depth, cm 70 x 16 x 8 Product information: Belt for hunters/fishermen. 7 pockets-pockets for necessary things. Soft lining Age

Product information: Convenient bag for camping accessories, cameras, mini-camcorders.

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®

Direct Action® Foxtrot® is a lightweight waist bag Laser-cut modular system MOLLE/PALS Fastens with a zipper The main compartment is completely covered with soft Velcro to increase personalization Internal pocket for carrying the device Two side pockets Two front pockets Two pockets on side panels Adjustable shoulder strap (length: 120 cm, width: 3.9 cm) FEATURES: Material: 100% Cordura® 500d Dimensions: 30×19×12 cm Accessories: Duraflex® Locks: YKK®