Categories

Pouches

907 products, 13 reviews, 58 videos
No products to compare
Sorting
Number:
Бренд
Type of equipment
Appointment
System
Color
Material
The type of camouflage
Time of year
Office
Утеплитель/подкладка
The type of clothing
Type of clothing
The type of bag
Тип оптики
Backpack style
Цена
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 91 g Size: 13×11×5 cm (including the thickness of the insert buckle) Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer1 pouch to store SVD/carbine "Tiger" on the fastex. Replaces Pouch to store the SVD (Ref.2). Compared to the old model pouch has been redesigned from scratch and is more user-friendly design Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation Suitable for 8-charging shops saiga-308 and Tigr-308 The pouch is sewn entirely of two layers of fabric Cordura® 500d Fastens with Duraflex fastex®, the parent part is installed on the front wall of the pouch. The installation location of the fastex enhanced inside the second layer of fabric. Fastex opens silently easy to handle In the front wall of the pocket between the two layers of fabric Cordura® 500d sewn a piece of plastic. It supports the shape of the pocket, facilitating the introduction and extraction of the shop From the main compartment of the pouch Peeps at least 2.5 cm in height store the SVD, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the retrieval of the store All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 23×24×8 cm Weight: 310 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small rusks bag with the portability of MPL (small infantry shovel). The analog front pocket satchel "Assault M". Attention! On sale are the old version with the constructive differences and similar features. The photo in the catalog currently shows the old version Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break) Top zips close fastex Duraflex® vertical density throughout the bag. These lines form a power frame, the superfluous ends curl up and hide under the ring out of gum On the back wall hidden flat pocket to the entrance of MICROSTRIP lines on top for carrying handle down. In the bottom pocket has a slit for the arm The outer surface is sheathed cells PALS for mounting additional pouches, 10 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 1060d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size (In×W×T): 12.5×13.5×4 cm Weight: 109 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch organizer for easy placement of small things Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height Use cases: the pouch on the Trouser belt, self bag-a man purse (the strap not included), pouch for belt, backpacks, satchels, pouch on your chest unloading vest On the front surface are cells PALS for mounting additional pouches Main compartment with two-way zipper (type 8), unbuttoned to the bottom, the opening angle is not adjustable. The zipper is sewn with double stitching, instead of the metal reeds are used loops of paracord (silent, impossible to break) Inside on the front wall fold-up flat pocket with vertical zipper and two-layer elastic system of cells of different widths (items are laid out horizontally) The system of internal organization in the form of narrow elastic cells on the underside of the front and rear walls of the pouch. Items are arranged vertically. Also in the upper part of stitched webbing with plastic hook-carabiner for hanging small things (keys, key chains and soD.) To the top of the rear wall sewn two plastic half-ring Duraflex® attachment straps (not included) to be worn as a handbag-borsetki All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 143 g Size (In×W×T): 17×19×12.5 cm Pouch for Russian army bowler. Also fits the Swedish army pot (SHAQ). Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt On the front wall sewn two horizontal density volume tehsilimi buckles Duraflex® All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size in the unfolded state: 22×10 cm Size folded: 12×10 cm Weight: 76 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for bottles light weight folding Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch holds most PET bottles of 1 l, capacity 1.5 l and is compatible with Nalgene bottles and their analogs The top of the pouch is dragged elastic cord with clamp Duraflex®, which is convenient to hold tall bottles. In the case of a short bottle the top of the pouch can be closed by flap and Velcro The pouch can be collapsed to a small size, in this position it is fixed by valve closure The main part of the pouch is made of light, thin and durable mesh REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 143 g Size (In×W×T): 17×19×12.5 cm Pouch for Russian army bowler. Also fits the Swedish army pot (SHAQ). Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt On the front wall sewn two horizontal density volume tehsilimi buckles Duraflex® All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Size: 11×7×2.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 22×4,5×4.5 cm Weight: 63 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for RDG (manual smoke grenade), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Top and bottom reinforced lining of thick webbing to maintain shape of pouch At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
External size: 10,5×12×7 cm Internal size: 10×12×7 cm Weight: 101 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the box of hunting cartridges, zip and Velcro closure Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height The shape and size is perfect to carry standard boxes of 25 rounds 12 gauge (70 mm) The pouch is closed with the cover cap on two-way zipper, snaps on top of the Velcro flap. As a result the contents of the pouch protected from ingress of water and dirt At the bottom, the rear wall and the lid of the pouch is used the lining fabric Oxford 210d (100% nylon) and a layer of soft foam At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Size: 18,5×6,5×16 cm Weight: 102 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUnder the pouch binoculars B7×30 "Second" or the PGO-7V (grenade launcher optical sight) with Velcro. Can be used as Luggage. Production is halted Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Cover complex shapes, protects contents against moisture and dirt Velcro fastener, comfortable skill of slings The external surface is sheathed PALS straps for attachment of additional pouches At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 5×1,5×20 cm Weight: 40 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Material: Cordura®1060d (100% nylon) Weight: 148 g Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Accessories: Duraflex® Size (In×W×T): 24×16,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerCarrying pouch for standard army folding shovels, used in some Western countries (USA, Germany, UK etcD.) and their commercial counterparts (Track folding shovel, SOG, Fiskars etcD.), silent castles (Spanish buckles) Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to three horizontal rows of cells in height Two silent castle (Spanish buckle) Duraflex®. Reliable, easy to undo and do not produce noise The shovel folded recommended to be placed in the pouch bayonet forward (outward), the handle to the platform Due to the special form covers the contents of the pouch protected from ingress of water and dirt Also for these purposes a second layer of fabric reinforced bottom of the front wall The pouch can be used as a spare Luggage All edges of the sling fabric and edged for reliability and neat appearance. Edging the edges of the front wall is located outside to protect from rubbing the edge of bayonet spade At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?  Forum discussion YOU MAY BE INTERESTED IN:
Size: 27×8,5×5.5 cm Weight: 196 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RPK shops, on the silent castle. Discontinued, replaced with magazine Pouch for 2 MAG. V PKK.3 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two RPK or RPK-74 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Size (In×W×T): 19×9,5×2 cm Weight: 79 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple pouch for 10-round magazines for the Saiga 410 gauge on the silent castle (Spanish buckle) suitable for hunting Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height Silent castle (Spanish buckle) Duraflex®. Reliable, easy to undo and not making noise At the bottom there is a grommet for drainage water
Size: 22,5×6×3 cm Weight: 67 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RSP (reactive signal cartridges), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt For easy fixing of the CPR pouch sewn inside the two cells of elastic tape Top and bottom reinforced lining of thick webbing to maintain shape of pouch At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 9×2.5 x9.5 cm Weight: 46 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Weight: 186 g Material: Cordura®1060d (100% nylon) Oxford 210d (100% nylon) Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. Discontinued, replaced by the under the gas mask Pouch/Luggage Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height Pouch latest generation fastens with a buckle "AAT", the ability to adjust. The old generation used a clasp with two buttons At the top of the valve from the inside sewn a small, flat pocket of fabric 210d Oxford with Velcro for kit anti-fog films for the lenses of a gas mask The pouch can be used as Luggage The outer surface is sheathed cells PALS/MOLLE for attachment of additional pouches The top of the rear metal loop for hanging on the strap CPF At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 6,5×13×4 cm Weight: 66 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerProduction is halted REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 11×7×2.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Size: 8,5×3,5×20 cm Weight: 83 g Pouch for 2 RAD (reactive lighting rounds), Velcro. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height For easy fixing the RAD inside the pouch sewn two cells of elastic tape At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 7×3×15 cm Weight: 34 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 21×8,5×3.5 cm Weight: 89 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RAD (reactive lighting rounds), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt For easy fixing the RAD inside the pouch sewn two cells of elastic tape At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) zip up pouch in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Size: 5×1,5×20 cm Weight: 40 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Weight: 44 g Size (In×W×T): 9×8,5×4 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 16×7×2.5 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 20-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 7×3×15 cm Weight: 34 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Weight: 77 g Size (In×W×T): 14×9,5×5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 6,5×4×16.5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 5×1,5×20 cm Weight: 40 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 6,5×13×4 cm Weight: 66 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerProduction is halted REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 15×3×8.5 cm Weight: 52 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6.5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Size: 22,5×6×3 cm Weight: 67 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RSP (reactive signal cartridges), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt For easy fixing of the CPR pouch sewn inside the two cells of elastic tape Top and bottom reinforced lining of thick webbing to maintain shape of pouch At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 9×2.5 x9.5 cm Weight: 46 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 140 g Size: 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Replaces Pouch for 2 MAG. AK Velcro adjustable, having a number of improvements. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much stronger than ordinary wide elastic bands, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely hold one or two stores In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted vertically) The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance All of the Velcro is sewn in two passes around the perimeter or optionally diagonally for a secure At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 127 g Size: 16×15×9 cm Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall rear pouch for the insert buckle. Improved model replacing the old one. Can be used for carrying drum shops of the PKK. Structurally, it is a full analogue of the Pouch under the mask/the Luggage, but with different dimensions (wider and shorter). Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with fastex Duraflex®, adjustable The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are biased upwards relative to the old position and stitched in a classical way (with an interval between the rows of wide slings). Just two rows in height. Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling UniClick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Size: A 6.5×4×16.5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 11×7×2.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 6,5×4×16.5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Size (In×W×T): 17,5×9,5×2 cm Weight: 63 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple pouch for 8-round magazines for the Saiga 410 gauge on the silent castle (Spanish buckle) suitable for hunting Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent castle (Spanish buckle) Duraflex®. Reliable, easy to undo and not making noise At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Size: 8,5×3,5×20 cm Weight: 83 g Pouch for 2 RAD (reactive lighting rounds), Velcro. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height For easy fixing the RAD inside the pouch sewn two cells of elastic tape At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 140 g Size: 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Replaces Pouch for 2 MAG. AK Velcro adjustable, having a number of improvements. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much stronger than ordinary wide elastic bands, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely hold one or two stores In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted vertically) The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance All of the Velcro is sewn in two passes around the perimeter or optionally diagonally for a secure At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Weight: 133 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 8 and 10 charging shops saiga-12 or Vepr-12 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the 10 round magazines saiga-12 or Vepr-12 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers This skill pouch wider compared to the automatic counterparts due to large size shops 12 gauge Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 3 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Size: 16×7×2.5 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 20-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 21×8,5×3.5 cm Weight: 89 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RAD (reactive lighting rounds), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt For easy fixing the RAD inside the pouch sewn two cells of elastic tape At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 140 g Size: 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Replaces Pouch for 2 MAG. AK Velcro adjustable, having a number of improvements. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much stronger than ordinary wide elastic bands, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely hold one or two stores In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted vertically) The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance All of the Velcro is sewn in two passes around the perimeter or optionally diagonally for a secure At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 135 g Size: 14,5×16,5×6 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with zipper with internal organization, square shape. The numbers in the title (4×2) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is perfect little organizer for handling systems and for PALS/MOLLE backpacks zones (zone must be a minimum of 4 cells PALS in width). The pouch is specially designed to be compatible with backpacks of manufacturing the Alloy Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall two volume pockets for small items, on the front wall one large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size: 25,5×22×9 cm Size collapsed: 10×13×5.5 cm Weight: 165 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Pouch for reset empty shops Rollypoly type, if necessary, transforming into a small bundle. Attention! In commercially available pouches the old version with the constructive differences and similar features. The photo in the catalog currently shows the old version Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Pouch when expanded accommodates up to 8 stores AKM/AK-74 and 5 shops saiga/Vepr-12 for 8 rounds A Velcro flap, with a very long skill of lines (possible to work in thick winter gloves), fastened in three positions - keeps the pouch in a collapsed state, as unnecessary fastened to the inner wall of the pouch or used to close the top of the pouch The neck of the pouch is dragged paracord and two latches Duraflex®, which reduces the risk of loss of stores Velcro sewn around the perimeter and in addition to the diagonals All the tissue sections and a sling hidden under the edging or seams for reliability and neat appearance At the bottom there is a grommet for water drainage. Its installation is reinforced with a piece of webbing for protection from ejection REVIEWS: Review from k-a-r-d-e-n
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) zip up pouch in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Size (In×W×T): 15×9,5×3 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple pouch for 5-round magazines for the Saiga 20 gauge on the silent castle (Spanish buckle) suitable for hunting Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height Silent castle (Spanish buckle) Duraflex®. Reliable, easy to undo and not making noise At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 73 g Size: 19×6,5×5.5 cm (including the thickness of the insert buckle, shows the minimum height) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerVersatile pouch for carrying a variety of fireworks – one RDG (manual smoke grenade), RAD (reactive lighting cartridge) or two RSP (reactive signal cartridges). On the fastex, with the possibility of height adjustment and lateral contractions. Well fits two 30 round magazines of 9×19 PP-19-01 Vityaz/saiga-9 Mount: the UniClick system of the third generation. One built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two to three horizontal rows of cells in height. In this pouch the narrowed clip (20 mm) for easier installation The cross section is dragged by three rubber bands-tape, distributed evenly over the entire height of the pouch. This allows to reliably fix one of the narrow RSP in a vertical position, preventing it from falling out sideways from under the flap of the pouch and prevents the loss of items when you open the valve The pouch fastens with Duraflex fastex® with adjustable height. Maternal fastex sewn to the edge of the valve pouch and works as a handy skill for faster opening At the entrance of the front pouch sewn loop of webbing skill. Pulling it forward, it is possible to facilitate the introduction of the subject All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Size: 16×7×2.5 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 20-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 7×3×15 cm Weight: 34 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 285 g Size: 24×23,5×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Large utility pouch with zipper with internal organization, square shape. The numbers in the name (6×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a sugar on the back and unloading systems as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Weight: 44 g Size (In×W×T): 9×8,5×4 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 103 g Size (In×W×T): 18×8×5 cm Pouch under GPS Garmin 76 and any suitable dimensions analogues Mount: UniClick Plus one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and three horizontal rows of cells in height The pouch consists of two parts: mounting panel and case for GPS. In the closed position, the cover is attracted to the mounting panel, the GPS screen facing the body and protected. Canadian undoing the buttons at the top of the pouch case can be flipped forward at the optimum angle, the screen looks up (very useful when the pouch hanging in the chest). A loop, throwing it over a button made from elastic cord, and has a convenient skill, which can work even in thick gloves Mounting panel: With universal mounting beskapotniki UniClick Plus, allows you to hang the pouch on the PALS-compatible platform and the belts/straps of any width Recommended places for installation of the pouch: cell PALS straps of backpacks and CPF, a chest coupler of a backpack and CPF, the breast area and unloading vests and bibs Case for GPS: Fastens with a Velcro flap The case is fastened down to the bottom of the mounting panel. For this purpose the mounting panel stitched belt loops, detachable with Velcro, which should embrace otnosheniyu the buckle on the case. Attention! The belt loops should be threaded under a narrow braid (see the photo in the catalog) The case is lined with soft foam to protect against bumps and fleecy fabric to protect from scratches Case for GPS can detach from the mounting panel and used separately. For fastening the cover on it separately sewn vertical line, forming a series of loops. In these loops pass through the webbing (not included), clasps the hand in the forearm, Bicycle handlebar and so onp. REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 6,5×4×16.5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 16×7×2.5 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 20-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 11×7×2.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Weight: 133 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 8 and 10 charging shops saiga-12 or Vepr-12 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the 10 round magazines saiga-12 or Vepr-12 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers This skill pouch wider compared to the automatic counterparts due to large size shops 12 gauge Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 3 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Size: 26,5×7×6 cm Weight: 133 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two shops PKK Velcro and buckle "AAT". Discontinued, replaced with magazine Pouch for 2 MAG. V PKK.3 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two RPK or RPK-74 At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 140 g Size: 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Replaces Pouch for 2 MAG. AK Velcro adjustable, having a number of improvements. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much stronger than ordinary wide elastic bands, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely hold one or two stores In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted vertically) The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance All of the Velcro is sewn in two passes around the perimeter or optionally diagonally for a secure At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) zip up pouch in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6,5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 185 g Size: 29×10×8 cm (taking into account the thickness of the insert buckle, the height is given for RPK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two shops RPK or RPK-74. Velcro fastener with the possibility of switching off (for quietness) fastex and Duraflex®. The valve is protected from dirt, built-in divider shopping Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength Pouch Velcro fastener with adjustable height, reliable grip with different types and number of shops. If necessary, a quiet operation is covered by Velcro mating Velcro-flap, sewn to the wrong side of the front wall of the pouch The pouch fastens with Duraflex fastex® with adjustable height. Maternal fastex sewn to the edge of the valve pouch and works as a handy skill for faster opening From the main compartment of the pouch Peeps at least 4 cm in height stores, which is convenient to retrieve them Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The pouch has a built in non removable divider stores. The partition is made of two layers of fabric Cordura® 500d, in its top part hidden strip of hard plastic to maintain the shape (facilitates insertion of the shops). The separator not only sewn on the sides, but the bottom of the pouch, which eliminates the opportunity to catch on protruding parts of the store when it is ejected Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the extraction of shops The outer surface is sheathed cells PALS for mounting additional pouches (grenades, CPR, etcp.). On each side surface 2 cells wide by 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage You can use the pouch as a fallback to carry four RB All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Utilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 91 g Size: 13×11×5 cm (taking into account the thickness of the insert buckle) Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer1 pouch to store SVD/carbine "Tiger" on the fastex. Replaces Pouch to store the SVD (Ref.2). Compared to the old model pouch has been redesigned from scratch and is more user-friendly design Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation Suitable for 8-charging shops saiga-308 and Tigr-308 The pouch is sewn entirely of two layers of fabric Cordura® 500d Fastens with Duraflex fastex®, the parent part is installed on the front wall of the pouch. The installation location of the fastex enhanced inside the second layer of fabric. Fastex opens silently easy to handle In the front wall of the pocket between the two layers of fabric Cordura® 500d sewn a piece of plastic. It supports the shape of the pocket, facilitating the introduction and extraction of the shop From the main compartment of the pouch Peeps at least 2.5 cm in height store the SVD, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the retrieval of the store All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 19,5×17,5×3 cm Weight: 160 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Block 2 of shingles under 30 charging the stores of the AK-74/AKM. You can also use the shops RPK-74/PKK Mount: two or four removable clips, not included. For mounting on a classical system PALS/MOLLE need four cells wide and two to three horizontal rows of cells in height. Attention! For attaching pouch you must purchase two or four identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive:MOLLE 2M 125 mm 5" TacTie (Maxpedition) Long MALICE (Tactical Tailor) FixClip 5" (Kiwidition) For belts width up to 60 mm inclusive:MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US):ALICEMOLLE 2M 60 mm The pouch is designed for snug fit stores. It is recommended to place the stores cover up Pockets separated by a tiny gap, widening the stores relative to each other. This allows you to clenching your fingers separate store on the sides without interference from a nearby store. In addition, it protects the stores from the collision Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around the upper sling UniClick). Length of cord with a margin that takes into account the height of the shop RPK-74/PKK and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers In this pouch I have the manners of a Y-shaped (bisected to the bottom). When using the shopping AKM and RPK-74/PKK because of their strong curvature of ordinary skill can fall on you from too inclined cover, so splitting some of the habits worn at the top corner of the store, providing a secure hold Removable adjustable utyazhka of 4 mm elastic cord that spans across the shop, independent for each of the two pockets of the block. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pockets of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the shops, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when mounting them on top of the same block 2 of shingles or AK single AK shingles, two layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of shops without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Size: 7×3×15 cm Weight: 34 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 185 g Size: 29×10×8 cm (taking into account the thickness of the insert buckle, the height is given for RPK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two shops RPK or RPK-74. Velcro fastener with the possibility of switching off (for quietness) fastex and Duraflex®. The valve is protected from dirt, built-in divider shopping Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength Pouch Velcro fastener with adjustable height, reliable grip with different types and number of shops. If necessary, a quiet operation is covered by Velcro mating Velcro-flap, sewn to the wrong side of the front wall of the pouch The pouch fastens with Duraflex fastex® with adjustable height. Maternal fastex sewn to the edge of the valve pouch and works as a handy skill for faster opening From the main compartment of the pouch Peeps at least 4 cm in height stores, which is convenient to retrieve them Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The pouch has a built in non removable divider stores. The partition is made of two layers of fabric Cordura® 500d, in its top part hidden strip of hard plastic to maintain the shape (facilitates insertion of the shops). The separator not only sewn on the sides, but the bottom of the pouch, which eliminates the opportunity to catch on protruding parts of the store when it is ejected Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the extraction of shops The outer surface is sheathed cells PALS for mounting additional pouches (grenades, CPR, etcp.). On each side surface 2 cells wide by 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage You can use the pouch as a fallback to carry four RB All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 62 g Size: 8,5×14×5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Pouch for 10 cartridges 12 or 20 gauge with Velcro. Improved model replacing the old one Mount: two or three removable clips, not included. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two or three identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive:MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive:MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US):ALICEMOLLE 2M 60 mm Through the use of detachable clips to the significantly improved reliability of fastening to the belt compared to the old model pouch, reduced from hanging out of the pouch when working with valve Pouch sewn inside the 10 cells of elastic tape, which are inserted into the cartridges 12 and 20 gauge. Elastic band sewn flush with the entrance to the main compartment, which facilitates the entry of cartridges (unlike many analogues, in which the gum is recessed downwards) In case of need can be carried in the pouch for 6 extra rounds, putting them in the middle between the elastic rows of cells staggered with respect to the main rounds The pouch is sewn entirely of two layers of fabric Cordura® 500d The main compartment of the pouch has a small height (5 cm), therefore above the entrance stands out about 1 cm from the height of the cartridge, which facilitates its extraction In the middle of the valve sewed extra Velcro which allows you to sostenute folded valve itself. While the pouch remains open, the valve does not prevent access to the cartridges, the Velcro does not apply to hands. It also increases the rigidity of the valve, maintaining its shape Long skill in the form of a loop of webbing at the edge of the valve for easy opening of pouch The tissue sections and Velcro edged for reliability and neat appearance All sections of the sling hidden under the edging At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 91 g Size: 13×11×5 cm (including the thickness of the insert buckle) Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer1 pouch to store SVD/carbine "Tiger" on the fastex. Replaces Pouch to store the SVD (Ref.2). Compared to the old model pouch has been redesigned from scratch and is more user-friendly design Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation Suitable for 8-charging shops saiga-308 and Tigr-308 The pouch is sewn entirely of two layers of fabric Cordura® 500d Fastens with Duraflex fastex®, the parent part is installed on the front wall of the pouch. The installation location of the fastex enhanced inside the second layer of fabric. Fastex opens silently easy to handle In the front wall of the pocket between the two layers of fabric Cordura® 500d sewn a piece of plastic. It supports the shape of the pocket, facilitating the introduction and extraction of the shop From the main compartment of the pouch Peeps at least 2.5 cm in height store the SVD, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the retrieval of the store All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 143 g Size (In×W×T): 17×19×12.5 cm Pouch for Russian army bowler. Also fits the Swedish army pot (SHAQ). Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with fastex Duraflex®, adjustable Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt On the front wall sewn two horizontal density volume tehsilimi buckles Duraflex® All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 132 g Size (In×W×T): 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Pouch for two 30-minute charger stores AK74 or AKM. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping. Discontinued, replaced with magazine Pouch for 2 MAG. AK Velcro adjustable v.2 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely retain two and one store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted). The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling Uniclick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Weight: 77 g Size (In×W×T): 14×9,5×5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6.5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) External size: 14,5×Of 7.5×7 cm Internal size: 14×7×6.5 cm The size of the outer pockets: 7×6.5 cm Weight: 99 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUniversal pouch/for the camera, Velcro, with soft lining to protect the contents Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch is ideal for storing the camera the appropriate dimensions, but it can be used as a universal Luggage Due to the special shape of the valve and tube (is dragged paracord with retainer Duraflex®) the contents of the pouch protected from ingress of water and dirt The main compartment of the pouch protects the contents from shock, being a sandwich of fabric Cordura® 500d, semi-rigid foam layer and lightweight Oxford cloth 210d lining Outside to the side there is a small flat pocket with Velcro closure for storing small items (e.g. memory cards) REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6.5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6.5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Material: Cordura® 1060d (100% nylon) Weight: 57 g Accessories: Duraflex® Size (In×W×T): 9×17,5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch is designed primarily for the needs of hunters. It is compact and has quiet zipper. Dimensions calculated for the use of cartridges 12 and 20 gauge shells with a length up to 76 mm inclusive Mount: two removable clips, not included. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase two of the same clips of the following types: For platform PALS/MOLLE: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts of any width up to 60 mm: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, the US Belt and the waist Belt Enhanced Military Web Belt BLACKHAWK!): ALICE Silent and secure locking (Spanish buckle) manufactured by Duraflex For strength and rigidity of the pouch is made from two layers of fabric Cordura® 1060d In the valve insert of a thin stiff foam keeping fit Inside the pouch sewn 6 cells of elastic tape, which are inserted into the cartridges 12 and 20 gauge All fabric edges and lines are hidden under the bezel for reliability At the bottom there is a grommet for drainage water YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size (In×W×T): 12.5×13.5×4 cm Weight: 109 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small pouch organizer for easy placement of small things Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height Use cases: the pouch on the Trouser belt, self bag-a man purse (the strap not included), pouch for belt, backpacks, satchels, pouch on your chest unloading vest On the front surface are cells PALS for mounting additional pouches Main compartment with two-way zipper (type 8), unbuttoned to the bottom, the opening angle is not adjustable. The zipper is sewn with double stitching, instead of the metal reeds are used loops of paracord (silent, impossible to break) Inside on the front wall fold-up flat pocket with vertical zipper and two-layer elastic system of cells of different widths (items are laid out horizontally) The system of internal organization in the form of narrow elastic cells on the underside of the front and rear walls of the pouch. Items are arranged vertically. Also in the upper part of stitched webbing with plastic hook-carabiner for hanging small things (keys, key chains and soD.) To the top of the rear wall sewn two plastic half-ring Duraflex® attachment straps (not included) to be worn as a handbag-borsetki All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×17,5×3.5 cm Weight: 127 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock 2 of shingles under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as for pistols (Glock 17, TL, AAR etcD.) Mount: two or four removable clips, not included. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase two or four identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit stores. It is recommended to place the stores cover up Pockets separated by a tiny gap, widening the stores relative to each other. This allows you to clenching your fingers separate store on the sides without interference from a nearby store. In addition, it protects the stores from the collision Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around the upper sling UniClick). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of ductile material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the shop, independent for each of the two pockets of the block. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pockets of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the shops, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when mounting them on top of the same block 2 of shingles BCC/M4 single shingles or BCC/M4, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of shops without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. hand enters from the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: LibertyВ® (the Netherlands) filament nylon bonded Material:CorduraВ® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: DuraflexВ® Lightning: SBSВ® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size: Of 13.5Г—6Г—19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Pouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper DuraflexВ®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 25,5×22×9 cm Size collapsed: 10×13×5.5 cm Weight: 165 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for reset empty shops Rollypoly type, if necessary, transforming into a small bundle. Attention! On sale are the old version with the constructive differences and similar features. The photo in the catalog currently shows the old version Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Pouch when expanded accommodates up to 8 stores AKM/AK-74 and 5 shops saiga/Vepr-12 for 8 rounds A Velcro flap, with a very long skill of lines (possible to work in thick winter gloves), fastened in three positions - holds folded, idly fastened to the inner wall of the pouch or used to close the top of the pouch The neck of the pouch is dragged paracord and two latches Duraflex® to reduce the risk of loss of stores Velcro sewn around the perimeter and in addition to the diagonals All the tissue sections and a sling hidden under the edging or seams for reliability and neat appearance At the bottom there is a grommet for water drainage. Its installation is reinforced with a piece of webbing for protection from ejection REVIEWS: Review from k-a-r-d-e-n
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 142 g Size: 20×19 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch on two fastech for MPL (a small infantry shovel), shovel is carried by handle down. Improved model replacing the old one Mount: system UniСlick third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to three horizontal rows of cells in height The pouch is a flat rectangular pocket with entrance from the bottom, which is inserted into a shovel The pouch is fastened at the bottom by two fastex Duraflex® with adjustable The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength In the new model slightly increased the dimensions of the cover, in addition all siteplease for bayonet bezel made out. Due to these measures the shovel is inserted and removed much easier All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance
Weight: 20 g Size (W×B×T): 6×12×2 cm Material: 600D Oxford Polyester TPU Accessories: Duraflex® Small waterproof (pouch) for telephone, radio and T.p. Manufactured by "weld" technology. All seams are sealed The pouch can be fastened to the strap of a backpack with the rifle or worn on your belt The front surface has a transparent window Attention! Waterproof zipper is not 100% protection from moisture penetration
Size back walls: 28×18 cm The size of the main compartment: 26×16×9 cm Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 356 g Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun tape. Improved model replacing the old one Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation The pouch fastens with Duraflex®, ability to adjust. Belt is stitched from the bottom to the top, forming a power frame Cover with sides to protect the content from moisture and dirt. Its design has been improved compared to the old model The dimensions of the main compartment of the pouch is reduced compared to the old model for a more tight fit In the walls of the pouch between the layers of fabric sewn hard plastic inserts. They maintain the shape of the pouch, facilitating the introduction and extraction of the box. Also thanks to this convenient to use with cartridge belts without box Outer side surface is sheathed cells PALS for mounting additional pouches (three rows of two cells on each side) The pouch is sewn entirely of two layers of fabric Cordura® 500d At the bottom of the inside reinforcement of 60 mm slings to protect from rubbing lever cover lock boxes On the side near the bottom has a grommet for drainage water All edges of the fabric and the ends of the sling is turned over or hidden in the seams for reliability and neat appearance REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 25,5×22×9 cm Size collapsed: 10×13×5.5 cm Weight: 165 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for reset empty shops Rollypoly type, if necessary, transforming into a small bundle. Attention! On sale are the old version with the constructive differences and similar features. The photo in the catalog currently shows the old version Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Pouch when expanded accommodates up to 8 stores AKM/AK-74 and 5 shops saiga/Vepr-12 for 8 rounds A Velcro flap, with a very long skill of lines (possible to work in thick winter gloves), fastened in three positions - holds folded, idly fastened to the inner wall of the pouch or used to close the top of the pouch The neck of the pouch is dragged paracord and two latches Duraflex® to reduce the risk of loss of stores Velcro sewn around the perimeter and in addition to the diagonals All the tissue sections and a sling hidden under the edging or seams for reliability and neat appearance At the bottom there is a grommet for water drainage. Its installation is reinforced with a piece of webbing for protection from ejection REVIEWS: Review from k-a-r-d-e-n
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) to zip up in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Size: 22,5×14,5×4 cm Weight: 168 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for five shots grenade launcher VOG-25 and VOG-25P, Velcro and snap button. Discontinued, replaced by for 5 VOG-25 v.3 vertical and horizontal Mount: two removable clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The shots are arranged horizontally in the pouch Each compartment of the pouch fastens with Velcro and a button. The button has two positions, calculated as the VOG-25 and longer shots VOG-25P Through the use of detachable clips is equally convenient to use both the left and on the right side of the trunk, K. the pouch can be clipped upside down. This pouch must be installed so that separation of the pouch open in the forward direction. Clip and it should look button down At the bottom of each compartment of the pouch has a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Dimensions (W×T×In): 9×4,5×13 cm Weight: 50 g Material: 600D Polyester Accessories: YKK Universal travel pouch Perfect for attaching to the straps of backpacks Tight and secure attachment to any MOLLE platform. Clips are not required Perfect to store your phone, PDA, or compact camera Walls sealed with foam
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Material: Cordura® 500d (100% nylon) Weight: 182 g Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. It is recommended to carry the burner, JetBoil Sumo. Improved model replacing the old one. Structurally, it is a full analogue of the small Pouch on the rear fastex but with other dimensions (and higher) Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable At the top of the valve from the inside sewn small flat pocket with Velcro for kit anti-fog films for the lenses of a gas mask. On the new model Velcro sewn reinforced way, added skill of slings for easy opening The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are offset from the old position and stitched in a classical way (with an interval between the rows of wide slings). Just three rows in height (in the old version of the pouch – two). Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling Uniclick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion
Size: 16,5×6,5×5 cm Weight: 71 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for glasses zipper soft lining Mount: one removable clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height The pouch closes with a zipper odnokomnatuyu Metal carabiner for hanging the pouch Lining (protection from scratches) and a layer of soft foam (shock protection) The pouch is positioned vertically, the entrance side zipper. Thanks to the removable clip can be installed upside down, soE. the entrance will be on the opposite side Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 55 g Size (In×W×T): 16×8×3.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for the grease fitting PC Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height A Velcro flap, with the easy skill of lines at the end At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Material: Cordura® 500d (100% nylon) Weight: 182 g Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. It is recommended to carry the burner, JetBoil Sumo. Improved model replacing the old one. Structurally, it is a full analogue of the small Pouch on the rear fastex but with other dimensions (and higher) Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable At the top of the valve from the inside sewn small flat pocket with Velcro for kit anti-fog films for the lenses of a gas mask. On the new model Velcro sewn reinforced way, added skill of slings for easy opening The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are offset from the old position and stitched in a classical way (with an interval between the rows of wide slings). Just three rows in height (in the old version of the pouch – two). Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling Uniclick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 132 g Size (In×W×T): 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping. Discontinued, replaced with magazine Pouch for 2 MAG. AK Velcro adjustable v.2 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely retain two and one store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted). The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer mode quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling Uniclick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 65 g Size (In×W×T): 14×7×5 cm Pouch under GPS Dakota and Oregon, as well as any suitable size counterparts Mount: UniClick Plus one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and three horizontal rows of cells in height The pouch consists of two parts: mounting panel and case for GPS. In the closed position, the cover is attracted to the mounting panel, the GPS screen facing the body and protected. Canadian undoing the buttons at the top of the pouch case can be flipped forward at the optimum angle, the screen looks up (very useful when the pouch hanging in the chest). A loop, throwing it over a button made from elastic cord, and has a convenient skill, which can work even in thick gloves Mounting panel: With universal mounting beskapotniki UniClick Plus, allows you to hang on PALS-compatible platform and the belts/straps of any width Recommended places for installation of the pouch: cell PALS straps of backpacks and CPF, a chest coupler of a backpack and CPF, the breast area and unloading vests and bibs Case for GPS: Fastens with a Velcro flap The case is fastened down to the bottom of the mounting panel. For this purpose the mounting panel stitched belt loops, detachable with Velcro, which should embrace otnosheniyu the buckle on the case. Attention! The belt loops should be threaded under a narrow braid (see the photo in the catalog) The case is lined with soft foam to protect against bumps and fleecy fabric to protect from scratches Case for GPS can detach from the mounting panel and used separately. For fastening the cover on it separately sewn vertical line, forming a series of loops. In these loops pass through the webbing (not included), clasps the hand in the forearm, Bicycle handlebar and so onp. REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 127 g Size: 16×15×9 cm Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall rear pouch for the insert buckle. Improved model replacing the old one. Can be used for carrying drum shops of the PKK. Structurally, it is a full analogue of the Pouch under the mask/the Luggage, but with different dimensions (wider and shorter). Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are biased upwards relative to the old position and stitched in a classical way (with an interval between the rows of wide slings). Just two rows in height. Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling UniClick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 113 g Size (In×W×T): 17,5×14×6.5 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carry case Patriotic army of 800 ml flasks, on the button Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Valve with a hole in the center for the lid of the jar, completely covering the top (except the cover). Fastens with a button that is hidden under the surface of the valve to protect against pullout and flare with the abrasion of the coating. Handy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 54 g Size (In×W×T): A 14.5×8×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for carrying IPP (individual dressing packets). Fits the most popular domestic and foreign IPP Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height A Velcro flap with the easy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Description: Universal soft pouch for stores and other equipment. Features: Weight : 115 g Material: 420 HD Nylon Size : 21х20 cm Technology: easy access with one hand. attached to any existing systems. fits 4 shop G36. MOLLE System
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 54 g Size (In×W×T): 14,5×8×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for carrying IPP (individual dressing packets). Fits the most popular domestic and foreign IPP Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height A Velcro flap with the easy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of ductile material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Size back walls: 28×18 cm The size of the main compartment: 26×16×9 cm Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 356 g Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun tape. Improved model replacing the old one Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation The pouch fastens with Duraflex®, ability to adjust. Belt is stitched from the bottom to the top, forming a power frame Cover with sides to protect the content from moisture and dirt. Its design has been improved compared to the old model The dimensions of the main compartment of the pouch is reduced compared to the old model for a more tight fit In the walls of the pouch between the layers of fabric sewn hard plastic inserts. They maintain the shape of the pouch, facilitating the introduction and extraction of the box. Also thanks to this convenient to use with cartridge belts without box Outer side surface is sheathed cells PALS for mounting additional pouches (three rows of two cells on each side) The pouch is sewn entirely of two layers of fabric Cordura® 500d At the bottom of the inside reinforcement of 60 mm slings to protect from rubbing lever cover lock boxes On the side near the bottom has a grommet for drainage water All edges of the fabric and the ends of the sling is turned over or hidden in the seams for reliability and neat appearance REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 113 g Size (In×W×T): 17,5×14×6.5 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carry case Patriotic army of 800 ml flasks, on the button Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Valve with a hole in the center for the lid of the jar, completely covering the top (except the cover). Fastens with a button that is hidden under the surface of the valve to protect against pullout and flare with the abrasion of the coating. Handy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 127 g Size: 16×15×9 cm Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall rear pouch for the insert buckle. Improved model replacing the old one. Can be used for carrying drum shops of the PKK. Structurally, it is a full analogue of the Pouch under the mask/the Luggage, but with different dimensions (wider and shorter). Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are biased upwards relative to the old position and stitched in a classical way (with an interval between the rows of wide slings). Just two rows in height. Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling UniClick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Size: 6,5×2.5 x9 cm Weight: 35 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for the pack of cigarettes with disposable lighters (Cricket, BIC® andD.) Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height Conveniently placed on the strap of a backpack or a Trouser belt Separate compartment for cigarette pack fastens with a flap of complex shape, protecting contents from ingress of dirt and moisture. Velcro, with the easy skill of slings Side compartment for standard disposable lighter size, the valve of straps with Velcro At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. hand enters from the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 285 g Size: 24×23,5×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerLarge utility pouch with zipper with internal organization, square shape. The numbers in the name (6×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a sugar on the back and unloading systems as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size: 17,5×6,5×3.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for flashlights with a height of 13-15 cm and a diameter of the handle up to 3.5 cm and other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and from two to three horizontal rows of cells in height The rear wall of the pouch is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and the lining is made of light fabric Oxford 210d. The front wall - Cordura® 500d, rigid webbing and the lining is 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 29 g Size: 14,5×5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerMagazine pouch with Velcro under one store to modern pistols (TL, APS, Glock 17, SIG-Sauer P226, etcD.). With adjustable height and lateral utjazhki. Can also be used for carrying a variety of large folding knives, flashlights and so onp. items (dimensions – height about 12-14 cm, a diameter of 3 cm). Not compatible with RM stores and multitools (too short), it is recommended to purchase a Pouch under multitool or small. gas. cylinder Mount: one removable clip, batteries not included. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase one clip of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit shop The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks at least 3 cm in height pistol shop, which is convenient for its removal The cross section of the pouch is dragged 35 mm sewn elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the end of the valve 2 cm skill for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 55 g Size (In×W×T): 16×8×3.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for the grease fitting PC Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height A Velcro flap, with the easy skill of lines at the end At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) External size: 14,5×Of 7.5×7 cm Internal size: 14×7×6.5 cm The size of the outer pockets: 7×6.5 cm Weight: 99 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUniversal pouch/for the camera, Velcro, with soft lining to protect the contents Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch is ideal for storing the camera the appropriate dimensions, but it can be used as a universal Luggage Due to the special shape of the valve and tube (is dragged paracord with retainer Duraflex®) the contents of the pouch protected from ingress of water and dirt The main compartment of the pouch protects the contents from shock, being a sandwich of fabric Cordura® 500d, semi-rigid foam layer and lightweight Oxford cloth 210d lining Outside to the side there is a small flat pocket with Velcro closure for storing small items (e.g. memory cards) REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 103 g Size (In×W×T): 18×8×5 cm Pouch under GPS Garmin 76 and any suitable dimensions analogues Mount: UniClick Plus one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and three horizontal rows of cells in height The pouch consists of two parts: mounting panel and case for GPS. In the closed position, the cover is attracted to the mounting panel, the GPS screen facing the body and protected. Canadian undoing the buttons at the top of the pouch case can be flipped forward at the optimum angle, the screen looks up (very useful when the pouch hanging in the chest). A loop, throwing it over a button made from elastic cord, and has a convenient skill, which can work even in thick gloves Mounting panel: With universal mounting beskapotniki UniClick Plus, allows you to hang on PALS-compatible platform and the belts/straps of any width Recommended places for installation of the pouch: cell PALS straps of backpacks and CPF, a chest coupler of a backpack and CPF, the breast area and unloading vests and bibs Case for GPS: Fastens with a Velcro flap The case is fastened down to the bottom of the mounting panel. For this purpose the mounting panel stitched belt loops, detachable with Velcro, which should embrace otnosheniyu the buckle on the case. Attention! The belt loops should be threaded under a narrow braid (see the photo in the catalog) The case is lined with soft foam to protect against bumps and fleecy fabric to protect from scratches Case for GPS can detach from the mounting panel and used separately. For fastening the cover on it separately sewn vertical line, forming a series of loops. In these loops pass through the webbing (not included), clasps the hand in the forearm, Bicycle handlebar and so onp. REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Size: 6,5×2.5 x9 cm Weight: 35 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for the pack of cigarettes with disposable lighters (Cricket, BIC® andD.) Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height Conveniently placed on the strap of a backpack or a Trouser belt Separate compartment for cigarette pack fastens with a flap of complex shape, protecting contents from ingress of dirt and moisture. Velcro, with the easy skill of slings Side compartment for standard disposable lighter size, the valve of straps with Velcro At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 132 g Size (In×W×T): 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping. Discontinued, replaced with magazine Pouch for 2 MAG. AK Velcro adjustable v.2 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely retain two and one store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted). The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer mode quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling Uniclick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size: 14×6×3.5 cm Weight: 41 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for larger gas cartridges, or other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE need one cell wide and two horizontal rows of cells in height The rear wall of the pouch is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and the lining is made of light fabric Oxford 210d. The front wall - Cordura® 500d, rigid webbing and the lining is 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size back walls: 28×18 cm The size of the main compartment: 26×16×9 cm Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 356 g Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun tape. Improved model replacing the old one Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation The pouch fastens with Duraflex®, ability to adjust. Belt is stitched from the bottom to the top, forming a power frame Cover with sides to protect the content from moisture and dirt. Its design has been improved compared to the old model The dimensions of the main compartment of the pouch is reduced compared to the old model for a more tight fit In the walls of the pouch between the layers of fabric sewn hard plastic inserts. They maintain the shape of the pouch, facilitating the introduction and extraction of the box. Also thanks to this convenient to use with cartridge belts without box Outer side surface is sheathed cells PALS for mounting additional pouches (three rows of two cells on each side) The pouch is sewn entirely of two layers of fabric Cordura® 500d At the bottom of the inside reinforcement of 60 mm slings to protect from rubbing lever cover lock boxes On the side near the bottom has a grommet for drainage water All edges of the fabric and the ends of the sling is turned over or hidden in the seams for reliability and neat appearance REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 143 g Size (In×W×T): 17×19×12.5 cm Pouch for Russian army bowler. Also fits the Swedish army pot (SHAQ). Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt On the front wall sewn two horizontal density volume tehsilimi buckles Duraflex® All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size: 17,5×6,5×3.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for flashlights with a height of 13-15 cm and a diameter of the handle up to 3.5 cm and other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and from two to three horizontal rows of cells in height The rear wall of the pouch is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and the lining is made of light fabric Oxford 210d. The front wall - Cordura® 500d, rigid webbing and the lining is 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 200 g Size: 14,5×23,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch zipper internal structure horizontally oriented. The numbers in the name (6×2) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch perfect organizer for unloading systems, a simple belt from a small sling backpacks, as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells in width and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall a large flat zipper pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 200 g Size: 14,5×23,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch zipper internal structure horizontally