Categories

Axes

44 products, 27 videos
No products to compare
Sorting
Number:
Бренд
Appointment
Type of equipment
Material
Цена
welded with a wooden shank 155х1500
Fiskars axe X15 is specially designed and intended for works in the forest for firewood.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Weight: 0,46 kg. All sizes: Blade length, 300 mm. Warranty: 2 weeks. Material: the blade - steel. packing weight kg: 0.5 packaging dimensions see: 37*17*4 Folding saw 300mm Truper STP-12PX 18191 is for use on garden plots to care for the trees. The tool is fitted with a steel work surface with triangular teeth quickly, effectively and as efficiently cope with the cut even the toughest wood. The product has a folding mechanism that greatly simplifies the processes of storage and transportation and make them safer. Comfort and safetyA closed form of the handle provides convenience and safety for the hand when sawing branches. Foldable designThe tool has the option of folding blades for convenience and safety during storage and transportation. Increased strengthThe working part of steel folding saw 300mm Truper STP-12PX 18191 has an increased operating life.
Weight: 0.48 kg All sizes: 22.8 cm Material: carbon steel packing weight kg: 0.49 packaging dimensions see: 23*10*5 Small tourist axe Fiskars X5 is a great choice for travelers and lovers of the outdoors.  The axe is easy to carry in your bag or on your belt, K. it is equipped with a canvas cover. FEATURES At length only 228 mm and the total weight of 480 grams it is ideal for tourists and lovers of outdoor recreation Perfectly ground blade with double degree of hardness provides maximum durability Anti-friction coating protects the blade from corrosion and reduces friction by 25% The blade fixed in the handle and will not break despite the best efforts of Optimal balance of center of gravity ensures maximum force of blow Light, durable and wear resistant head material FiberCompTM minimizes physical stress at work Hook shape of the handle prevents slipping of the tool The axe is supplied with canvas case for easy storage and carrying
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Weight: 0.64 kg. the weight of the blade: 0,47 kg All sizes: length 35.5 cm Material: toporishche: FiberCompTM. Blade: high-alloy steel. packing weight kg: 0.65 packaging dimensions see: 35*15*5 Tourist axe X7 is an excellent choice for travelers and lubitelei of outdoor activities, convenient to store in the car and the boat FEATURES Length 355 mm, gross weight 640 g Universal axe for tourists and fans of outdoor recreation, and convenient to store in the car, on the boat and use on vacation Perfectly ground blade with double degree of hardness provides maximum durability Anti-friction coating protects the blade from corrosion and reduces friction by 25% The blade fixed in the handle and will not break despite the best efforts of Optimal balance of center of gravity ensures maximum force of blow Light, durable and wear resistant head material FiberCompTM minimizes physical stress at work Cushion cover SoftGripTM allows for a firm grip Hook shape of the handle prevents slipping of the tool The axe is equipped with a practical plastic case for easy storage and carrying
Weight: 565 G. All sizes: handle 36 cm Material: forged steel 1045 packing weight kg: 1 kg. packaging dimensions see: 47*15*9 The Truper axe tourist 565 g with fibreglass handle Axe small size is perfect for tourists, cottagers, hunters and anglers. Sharp blade forged from 1045 steel is convenient for splitting smaller logs, felling small trees and bushes. It is convenient to operate with one hand due to the low weight and length. Due to the large size convenient to carry in a backpack, carried in car or boat. The handle is made from strong and light fibreglass, resistance to temperature, and does not slip in your hand.
An axe for all occasions. Ergonomic design and light weight provide a good balance when working. The handle is made of durable plastic, not afraid of damp, nor wet, nor cold, nor dry weather. A sharp blade of hard steel. Special secure mounting. The blade never goes wrong with toporishcha. Safe rubber handle does not slip in your hand.
welded with metal handle 155х1350
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Blade length: 89 mm The thickness of the blade: 6.6 mm The total length of the knife: 318 mm Blade material: 3Cr13 Weight - 0.81 kg Handle: fiberglass/nylon Sheath: nylon Tactical Tomahawk About the manufacturer Certificate
Characteristics of a knife: Blade length: 109 mm The thickness of the blade: 2.4 mm The total length of the knife: 225 mm Blade material: the steel is Sandvik 12c27 Handle: rubberized plastic Sheath: plastic Characteristics of the axe: Length of axe: 115,0 mm Blade width: 93,0 mm Length toporishcha: 310,0 mm Weight: 0.49 kg Toporishche: plastic Case: skin Marching set, including the classic Mora 2000 knife with orange accents on the hilt and scabbard and orange camp Axe Camping hatchet with a bright orange handle About the manufacturer Certificate
Weight: 500 gr. All sizes: Total length, cm: 22.5; Blade length,cm: 10.9. Axe: Total length, cm: 32.3; The length of a piece of iron,see: 11.50 Material: Steel 420, handle made of aluminum with wooden sun packing weight kg: 0.700 packaging dimensions see: 15*38*4.5 A wonderful gift set MORA Outdoor Kit MG (1-2001) consists of two items: axe the Mora Camp Axe and Mora Outdoor 2000 knife. Not a cold weapon and is not a subject forbidden to sale in territory of the Russian Federation. Description of Morakniv Outdoor kit MG Kit, the knife Mora 2000(green)+ax: The axe blade is made of steel alloyed with boron that improves endurance and durability, with black finish epoxy. Toporishche from lightweight and extra strong plastic. The weight of the axe – 0.5 kg. Included with the axe is a leather cover protecting from injury and damage of the working surface of the blade. Set MORA Outdoor Kit MG (1-2001) The Mora Outdoor 2000 knife is one of the most popular all-purpose knife among tourists and fishermen. The original blade is of a special shape made of cold-rolled stainless steel Sandvik 12C27. Steel Sandvik 12C27 is probably the most balanced knife steel, possessing simultaneously excellent sharpening characteristics, high strength and resistance to corrosion. Recommended applications are: hunting knives, tourist knives, pocket knives, high-end kitchen knives and tactical knives. With a hardness range of 54-61 HRC* high toughness, excellent cutting edge preservation and good corrosion resistance, 12C27 is the recommended steel for the production of hunting and pocket knives, high quality chef and tactical knives. The knife has a handle made of rubberized plastic and comes with plastic scabbard with a mount that provide quality transportation and storage of the knife, without damage clothes and cause injury. Set MORA Outdoor Kit MG (1-2001) Packed in a gift box. Characteristics of a knife: Total length, mm: 225,0 Length klinka,mm: 109,0 The greatest width klinka,mm: 23,8 The thickness of the butt,mm: 2.4 GHz Stick length,mm: 114,0 Handle width (in Ms. parts),mm: 32,3 The thickness of the handle (cf. parts),mm: 21,2 Characteristics of the axe: Total length, mm: 323,0 A piece of iron length,mm: 1150 Maximum width,mm: 90,2 The thickness of the butt piece of wire,mm: 6,1 Length toporishcha,mm: 323,0 Handle width (in Ms. parts),mm: 32,0 The thickness of the handle (cf. parts),mm: 19,2 Net weight: 0,5 kg
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
A holder for canvases: 22 cm Canvas: 16.5 cm Weight: 320 g Material: stainless steel, plastic Package contents: Holder for fabric with anti-slip handle Canvas with a fine tooth Canvas with large tooth Fabric cover
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Weight: 980 gr. The weight of the blade: 760 gr. All sizes: length - 440 mm. Material: Lightweight and durable toporishche FiberCompTM from the fibrous composite. Cushioned grip made of elastomer with a coating of elastic material SoftGripT Features: The design of the blade allows not only effectively use the X10 axe for carpentry, but also to chop small logs, chopping small trees. Blade packing weight kg: 1 kg. packaging dimensions see: 44*18*5 Fiskars carpenter's axe X10: Axe for professional purposes, has a special shape of the blade. Designed primarily for carpenters and carpenters, as well as useful to builders and owners of country houses for joinery, carpentry and other works. Due to the small size of the axe will find its place in a car, boat. The design of the blade allows not only effectively use the X10 axe for carpentry, but also to chop small logs, chopping small trees. Blade axe double quenching with anti-friction coating. The axe is made of strong, durable and lightweight material which is resistant to dry and wet weather. Handle of axe is made from an elastic material amortiziruemoe with comfort grip. The end of the handle in the form of a hook for safe use (does not slip from the hand). The blade pressed into the handle by method of casting under pressure, etc O. it's not going to break. Plastic cheek ensures a secure blade lock. Supplied with case (plastic) for ease of carrying and storage.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
The cleaver is designed for cutting and thinning of branches, twigs, small trees. Used for clearing the area from overgrown.
Axe Fiskars X27 axe belongs to the professional series of Fiskars axes and designed to work on the firewood.
Weight: 2,43 kg. All sizes: 72 cm Material: carbon steel packing weight kg: 2.43 packaging dimensions see: 76*23*5 Axe-the Fiskars X25 axe +sharpener (122482): - Blade design effectively allows you to chop logs. - The blade is double-hardened with anti-friction coating. - The new shape of the blade of an axe-the axe is slightly rounded, making it easier to pull out of the logs. - Elongated axe-handle delivers a powerful blow. - The handle is made of strong, durable and lightweight material which is resistant to arid, humid weather. - Handle made of elastic material amortiziruemoe with comfort grip. The end of the handle in the form of a hook for safe use (does not slip in your hand). - The blade of the axe come down from the toporishcha, K. the handle pressed into it by casting under pressure. Plastic cheek ensures secure blade lock. - Regular use of the sharpener will keep Your axe sharp. Ceramic grinding stones sharpen the axe blade at the correct angle. The sharpener is easy to open and clean.
Weight: 2,43 kg. All sizes: 72 cm Material: carbon steel packing weight kg: 3 packaging dimensions see: 72*22*5 Axe – the axe X25 is intended for chopping big logs the size FEATURES Length 722 mm, gross weight 2430 g Specially designed for chopping big logs The angle of sharpening the cutting edges 35° Due to the convex shape of the wedge axe is easier to pull out of the logs Perfectly ground blade with double degree of hardness provides maximum durability Anti-friction coating protects the blade from corrosion and reduces friction by 25% The blade fixed in the handle and will not break despite the best efforts of Optimal balance of center of gravity ensures maximum force of blow Light, durable and wear resistant head material FiberCompTM minimizes physical stress at work Cushion cover SoftGripTM allows for a firm grip Hook shape of the handle prevents slipping of the tool The axe is equipped with a practical plastic case for easy storage and carrying
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Weight: 0.64 kg. the weight of the blade: 0,47 kg All sizes: 35.5 cm Material: The material of the handle: FiberComp; Blade: of durable Finnish steel double quenching packing weight kg: 0.65 packaging dimensions see: 36*20*6 Universal axe Fiskars Solid has a unique design antifrictional coating handles made from FiberComp material, which prevents it from sliding. The axe is compact, has a robust plastic casing for easy and safe transportation. In the handle there is a hole for tool storage. Features: -Lightweight and durable toporishche from the fibrous composite.-Marks of an axe on toporishche is specified (name and type).Shock-absorbing handle is made of elastomer with a coating of elastic materialThe axe will not slip out hands, thanks to the handle made of elastomer with a special hook on the end.-Handle zapressovana in toporishche by injection molding.
Weight: 1.65 kg. the weight of the blade: 1,03 kg All sizes: 0,72 cm Material: The material of the handle: FiberComp; Blade: of durable Finnish steel double quenching packing weight kg: 1.65 packaging dimensions see: 72*35*5 Axe Fiskars Solid universal 121260 has a unique design antifrictional coating handles made from FiberComp material, which prevents it from sliding. Delannoy axe with handle - overall length 60 cm. equipped with robust plastic casing for easy and safe transportation. In the handle there is a hole for tool storage. Features: Double tempering of the blade, anti-friction coating of the handle;- Sharpening angle of 30 degrees;- The handle is made from a patented material FiberComp - nylon with inserts of glass fiber;- A strong connection is provided by a molding method under pressure. Application: For various provozovatele works.
The axes of the taiga is an exclusive product of the company Work. Made from sketches of the Siberian hunters, will satisfy discerning fans of extreme rest, fishing and hunting. The unusual shape of an axe specially designed for easy and convenient felling. Available axes Tiger and Deer for work and chrome axes (up to exclusive) as a gift to a lover of luxury and beautiful things.
The axe of carbon steel. Code: 2590 Size: 35х11 cm Weight: 780 g Material: steel
Weight: 1.57 kg. All sizes: length - 600 mm. Package contents: axe sharpener Material: carbon steel Features: The blade is dual hardened with anti-friction coating. The axe is made of strong, durable, lightweight material which is resistant to arid, packing weight kg: 1.60 packaging dimensions see: 65*22*4 Axe-the Fiskars X17 axe designed primarily for firewood. The shape of the blade allows not only to efficiently split logs of medium size, but also to cut wood. The new blade shape is slightly rounded, making it easier to pull out of the logs. Also included with the axe is a versatile sharpener that makes keeping the instrument in working condition easier.Features:- 10-year warranty on connecting the axe with the handle;- Blade axe double quenching with antifriction coating;- The handle is made from strong, durable, lightweight material which is resistant to arid, humid weather;- The handle of the axe is made out of soft shock absorbing material, with a comfortable grip. The end of the handle in the form of a hook, for safe use;- The handle of the axe is molded in the handle by a molding method under pressure. Plastic cheek also ensures reliable fixation of the blade;- Regular use of Fiskars sharpener will keep Your axe sharp. Ceramic grinding stones sharpen the axe blade at the correct angle. The sharpener is easy to open and clean;- The sharpener has clearly indicated grooves for axes and knives;- The sharpener cover strip protects hands and fingers while sharpening;- Non-slip pads on the base of the sharpener ensure stability when sharpening;The sharpener is easy to open and clean.Package contents:- Ax × 17;- Sharpener axe.
Axe axe Fiskars × 17 designed primarily for firewood. The shape of the blade allows not only to efficiently split logs of medium size, but also to cut wood. The new shape of the blade of an axe-the axe is slightly rounded, making it easier to pull out of the logs.
Weight: 2.6 kg. All sizes: 91.5 cm Material: carbon steel packing weight kg: 2.6 packaging dimensions see: 92*21*4 The elongated handle of the axe-the axe X27 will provide greater efficiency when splitting large logs FEATURES Length 915 mm, weight 2600 g Extra long handle for greater efficiency when splitting large trunks The angle of sharpening the cutting edges 35° Due to the convex shape of the wedge axe is easier to pull out of the logs Perfectly ground blade with double degree of hardness provides maximum durability Anti-friction coating protects the blade from corrosion and reduces friction by 25% The blade fixed in the handle and will not break despite the best efforts of Optimal balance of center of gravity ensures maximum force of blow Light, durable and wear resistant head material FiberCompTM minimizes physical stress at work Cushion cover SoftGripTM allows for a firm grip Hook shape of the handle prevents slipping of the tool The axe is equipped with a practical plastic case for easy storage and carrying
Weight: 1.75 kg. The weight of the blade: 0,840 kg. All sizes: length - 440 mm. Material: carbon steel Features: The design of the blade allows not only to efficiently split logs, but also to chop small trees. The blade is dual hardened with anti-friction coating. Axe packing weight kg: 1.75 packaging dimensions see: 45*20*6 Axe-the Fiskars X11 axe is very handy for splitting small logs and firewood. Axe-the axe features a unique cutting edge that easily cut into the wood, which then cleaves a thick blade of an axe. Very light and durable toporishche from patented by FISKARS material Fibercomp™ reduces several times the load and, in addition, it is virtually impossible to break.By coating the arm of an elastic material soft grip™, it is pleasant to hold in hands, and bent the end of the handle prevents the axe to slip out of his hands at the moment of impact. Due to the more rounded shape of the blade of the axe is easier to pull out chunks when chipping wood. Forged-forged steel Obuchi all Fiskars axes characterizes the exclusive Finnish quality, they are easily sharpened and have maximum durability. Accurate grinding of the blade of the axe at an angle of 30 ° on a convex cutting edge allows to make the blade less sensitive to chips. For the convenience of storing and carrying the axe - the Fiskars X11 axe supplied by a plastic cover. Length of 443 mm, gross weight 1075 g Axe comfortable for one-hand operation, Convenient for small logs and firewood The axe is supplied by a plastic cover for convenience of storage and resocks Universal axe-axe X11 is designed primarily for firewood. The curved blade shape allows for easier extraction of the axe in Kolka. Using it, you can not only chop small pieces of wood , but to chop wood for kindling. An ax will be useful at the cottage, in the village, and will fit in the car, in the boat. Not intended for regular and daily chopping wood and felling of trees. The design of the blade allows not only to efficiently split logs, but also to chop small trees. The blade is dual hardened with anti-friction coating. Axe comfortable for one-hand operation. The axe is made of strong, durable, lightweight material which is resistant to dry and wet weather. The handle is made from amortiziruemoe elastic material, with a comfortable grip. The end of the handle in the shape of a hook so that the axe didn't slip in the hand. As the handle is pressed into the blade by casting under pressure, it snaps. Besides plastic cheek ensures secure blade lock. Axe-the axe X11 supplied by a plastic cover.
Weight: 1,72 kg All sizes: 72 cm Material: carbon steel packing weight kg: 1.73 packaging dimensions see: 73*22*5 Axe axe Fiskars Solid A19 122142-in designed primarily for firewood. The shape of the blade allows not only to efficiently split logs of medium size, but also to cut wood. The new blade shape is slightly rounded, making it easier to pull out of the logs. - 10-year warranty on connecting the axe with the handle;- The blade is double-hardened with anti-friction coating black;- The blade is like axe of axe X17 - the blade shape is slightly rounded, making it easier to pull out of the logs;- Elongated axe-handle delivers a powerful blow. The handle is made of strong, durable and lightweight material which is resistant to arid, humid weather;- Length toporishcha like axe-axe X25;- Handle made of elastic material with shock-absorbing comfort grip. Logo on it black;- The end of the handle in the form of a hook for safe use (does not slip in your hand), has a corrugated surface;- The blade of the axe come down from the toporishcha, K. the handle pressed into it by casting under pressure;- Plastic cheek ensures reliable fixation of the blades;- Also axe-handle has a label with necessary information;- The axe-the axe is attached brochure for novice users.  Designed for intensive firewood collection. Application: Designed for intensive firewood collection.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Series Fiskars axes on all occasions. Ergonomic design and light weight provide a good balance when working. The blade never goes wrong with toporishcha. Safe brushed handle does not slip in your hand. The length of the grip. The length of the handle of the axe affects the position of your body and the kinetic energy of the blade. The thicker the wood must be cut, the greater the advantage of an axe with the long handle. An axe with a short handle is more accurate and easy to use tool. It is more suitable for inexperienced woodcutters and people of small stature. Using the long handle, you get increased velocity of the blade and greater the kinetic energy. The wood chopping. Saw logs are logs of 30-35 cm and put them on a log for sawing. Make sure that on the surface of the logs there is no grit or metal shavings that could damage the blade. Start to cut from the top end of the log. The felling of hardwood trees and conifers are managed differently. Coniferous trees it is easier to cut along the wide side, deciduous trees along the narrow side. Chop wood most fresh. The drier the wood, the harder it is to hack. Just cut tree it is easier to cut, especially if it's cold. For the most difficult wood use a wedge for splitting. Sawn wood dries well and it is less prone to moisture or rotting than not sawn wood. Maintenance of your axe. All axes can be sharpened with a file, a file with diamond coating, "wet" sharpening, a whetstone or sharpener "Fiskars Axe Timmer". The lubrication oil. The handle is made of polyamide resists wear, moisture and temperature changes. Thoroughly lubricate the blade with oil before you hang up your axe for storage. How to sharpen an axe. The grinding angle of approximately 30 degrees. Remember to keep the original shape of the blade, except when the axe is used for carving. In this case, when sharpening the blade attached to the more straight shape. Sharpening with a file. The use of a file with diamond coating is becoming extremely popular. The same technique as when using a regular file. Sharpening using the "wet ground" "Wet" sharpening wetted by oil and water. The process of sharpening is using a circular motion. Sharpening using a grinding stone. If the blade was damaged, the original sharpness can be achieved with the help of grinding stone. The final sharpening using sharpener Fiskars Axe Trimmer The Fiskars Axe sharpener Trimmer can be used to achieve the excellent sharpness. This sharpener can be used instead of "wet" sharpening. Always follow the safety precautions while working with the axe! When splitting wood you use safety glasses and boots when working with the tree trunk also use protective gloves. Chop in the direction from the roots to the crown of a tree. Stand firmly on the opposite side of the log. Safety glasses, protective helmet, protective glove, protective boots.
Weight: 2.6 kg. All sizes: 91,5 cm Material: the blade - steel double quenching. packing weight kg: 2.74 packaging dimensions see: 92*20*5 A Solid great axe 122300 It is convenient to chop large logs and firewood. The blade is made of durable Finnish steel double quenching, perfectly zatochena. The handle is made from elastic material amortiziruemoe with comfort grip, Fiskars logo. The axe does not slip in your hand when working through the form of a handle in the form of a hook at the end, there is a corrugated covering. Closed blade cover for safe transportation and storage. The technology of pressing the blade in the handle is from Fiskars - a guarantee of the durable and safe use.
Weight: 0.5 kg All sizes: Knife: Of 22.5*10.5 cm Axe: 32*11.5 cm Material: Knife(blade): Steel 12С27 Sandvik™ steel packing weight kg: 0.72 packaging dimensions see: 15*38*4.5 A great gift set MORA Outdoor Kit MG (12096) consists of two items: axe the Mora Camp Axe and Mora Outdoor 2000 knife. Not a cold weapon and is not a subject forbidden to sale in territory of the Russian Federation. Description of Morakniv Outdoor kit MG Kit, the knife Mora 2000(orange)+ax: The axe blade is made of steel alloyed with boron that improves endurance and durability, with black finish epoxy. Toporishche from lightweight and extra strong plastic. The weight of the axe – 0.5 kg. Included with the axe is a leather cover protecting from injury and damage of the working surface of the blade. Knife Morakniv Outdoor 2000 Orange   Blade material: Steel 12С27 Sandvik™ steel Hardness on the Rockwell scale (Hrc): 57-58 Type cutting edge blade: Plain The material of a handle: GRN thermoplastic with Dynaflex® rubber The material of a sheath: Thermoplastic GRN Blade length (see): 10.5 Knife length (see): 22.0 Blade width (see): 2.3 The butt thickness (mm): 2.3 Weight (GRS.): 95/140   Tourist axe, Mora Outdoor Axe Orange   Convenient tourist axe. Tourist axe of carbon steel. Toporishche from plastic, rubberized grip. Protective case. The thickness of the blade: 6 mm. Blade length: 115 mm. Length: 322 mm. Weight 0.5 kg.
Length of axe: 115,0 mm Blade width: 93,0 mm Length toporishcha: 310,0 mm Weight: 0.49 kg Toporishche: plastic Case: skin A small camping hatchet About the manufacturer Certification is not subject
Ask a question
Sale