Products from oxford cloth category

1121 product, 511 reviews, 399 videos
Compare (0)
Sorting:
Number:
Height
Size
Бренд
Color
The type of camouflage
Type headdress
Type of equipment
System
Material
The type of clothing
The backpack
Type of a sleeping bag
Type of tent
Office
Shoes style
Backpack style
The type of bag
The number of seats in the tent
Sex
Time of year
Appointment
Type of thermal underwear
Jacket type
Type of clothing
Защитные свойства
Утеплитель/подкладка
Стандарт
Климатические пояса (классы защиты)
Технология
Цена
Jacket: - free cut; clasp Central side, windproof placket, buttoned; - Flirty from the fabrics; - 2 Welt slant pockets with flap, buttoned down the front; - on the sleeves 1 overhead inclined pocket; - in the elbow reinforcing figured overlay; a bottom of sleeves on an elastic band; - hood double, with a visor, has a tight slide to adjust the volume; - the fit at the waist with the help of wings; Pants: - tailor made; - 2 side vertical pockets; - in the knee area, the rear halves of the pants along the seam of the seat – reinforcing plates; - 2 side patch pockets with flap; - Overhead figure 2 rear pockets with button closure; - cut parts in the knee area prevents them from stretching; - rear half below the knee gathered elastic band; - elastic waist; - bottom elastic band; - clip-on suspenders (braces); - belt loops; wearing – and the boots and trousers. material: tent fabric; composition: 100% cotton; density: 270 gr.; lining: the ripstop fabric, Oxford 600; cuff: Yes; sealing gum: Yes; pockets jacket/pant: Yes/Yes; optional: lightweight summer option; high strength fabric and seams;
Note - in this model, the insulation of a fleece jacket just in! Colors : khaki   Jacket: - free cut; clasp Central side, windproof placket, buttoned; - Flirty from the fabrics; - 2 Welt slant pockets with flap, buttoned down the front; - on the sleeves 1 overhead inclined pocket; - in the elbow reinforcing figured overlay; a bottom of sleeves on an elastic band; - hood double, with a visor, has a tight slide to adjust the volume; - the fit at the waist with the help of wings; Pants: - tailor made; - 2 side vertical pockets; - in the knee area, the rear halves of the pants along the seam of the seat – reinforcing plates; - 2 side patch pockets with flap; - Overhead figure 2 rear pockets with button closure; - cut parts in the knee area prevents them from stretching; - rear half below the knee gathered elastic band; - elastic waist; - bottom elastic band; - clip-on suspenders (braces); - belt loops; wearing – and the boots and trousers. material: tent fabric; composition: 100% cotton; density: 270 g.; lining: the ripstop fabric, Oxford 600; cuff: Yes; sealing gum: Yes; seasonality: demi; optional: reinforced insert, a removable fleece-lined boots on his trousers, suspenders included
Specifications: Specifications: Fabric Poly Oxford PU 550D RipStop Fabric bottom Poly Oxford PU 240 Volume (l) 120 Height-width-depth, cm 107 x 35 x 20 Product information: Backpack military for hunting and fishing. The adjustable suspension system of backpacks this model is very simple and does not require time for adjustment. Wide waist belt is fixed on the thighs, taking care to 80 percent weight. Handy pocket on the front and side pockets for long items. Backpack Bear 120 km is the largest hunting and fishing backpack.    durable fabric with waterproof impregnation Key features Type: unisex for hunting and fishing Suspension system: anatomical, chest coupler, zone belt Volume: 120 l Side screed: there Weight: 1.5 kg Functionality The top flap: there are height-adjustable, with pocket Pockets: side pockets, front pocket Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Specifications: Specifications: Float valve Suspension ABS V2 Fabric 600D Ripstop Poly Oxford Protective case Mounts mountain equipment Duraflex Fittings Waist belt with pockets Lateral couplers Elastic pockets Weight (kg) 2,39 Volume (l) 115 Height-width-depth, cm 95 x 40 x 30 Product information: Practical expedition backpack. Two big pockets on the front side, a large number of devices for external attachment. Waist belt with pockets   highly durable and reliable accessories from the world leader (USA)            removable cover to protect from moisture and dirt, placed in a special pocket of my backpack         to correct fixation of the straps of the backpack and prevent them from slipping         reliable and convenient fixing your gear outside the pack Key features Purpose: forwarding Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 115 l Side screed: there Ventilated straps: no Back vent: there Weight: 2.8 kg Height: 95 cm Width: 40 cm Thickness: 30 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: mounts mountain equipment Duraflex fittings
Specifications: Specifications: Float valve Suspension ABS 2 Fabric 600D Ripstop Poly Oxford Protective case Mounts mountain equipment Chest coupler Waterproof zipper Air Mesh Duraflex Fittings Reflective piping Tack Lateral couplers Weight (kg) 2,39 Volume (l) 115 Height-width-depth, cm 110 x 38 x 30 Product information: Universal for mountain tourismYou will be very convenient to move on rough terrain with new lightweight suspension system ABS2, evenly distributing weight on shoulders and waist, and reduces the load on the spine. For convenience of fastening of the mining equipment has developed a new hitch system. If you need something to get from the bottom of the backpack take advantage of the lower entrance. You have nowhere to put the card so it does not wrinkle? In the Yukon backpack has a special pocket for maps and documents on the front of the backpack. In the mountains the weather is changeable, sudden rain, but your belongings will stay dry thanks to ermochenko located in a special pocket in the bottom of the backpack. On the ends of the side ties have Velcro to secure the excess straps. durable fabric with waterproof impregnation rugged and reliable hardware from world leader () mesh material, wicking away from your body. Used on straps, the backrest and the belt of the backpack Reflective piping for safety in the dark to correct fixation of the straps of the backpack and prevent them from slipping Zipper special design for protection from moisture reliable and convenient fixing your gear outside the pack removable cover to protect from moisture and dirt, placed in a special pocket of my backpack Key features Purpose: tracking Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 115 l Side screed: there Ventilated straps: no Back vent: there Weight: 2.4 kg Height: 110 cm Width: 38 cm Thickness: 30 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: there Partition in the main compartment: there Side entrance: there Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: there Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: Duraflex fittings, mounts mountain equipment, waterproof zipper
Jacket suit winter field for servicemen sample of 2010. Different from the original external wind - and waterproof fabric, lightweight insulation and removable more comfortable front zip Outer fabric – Oxford (100% nylon). Unlike blended fabric original is waterproof, windproof and has high strength. Lining made of light synthetic fabric Central zipper, covered on the outside strap buttons (original buttons). Better protects from cold and wind, easier to work even in warm gloves For simplicity and ease of insulation (sintepon) is not changeable. The amount of insulation is less than in the original, more mid-season by appointment Strengthen the elbow pads of the second layer of tissue Cuffs fastened with a cloth pieces with Velcro Shoulder straps with Velcro sewn on the shoulders (the location of the new sample). Fanspage included High wide collar with fleece-lined. Fastens with Velcro Hooded insulated fleece layer, retracts into the collar. Is dragged around the face, and in two dimensions on the back of his head. Front fastens with Velcro The waist is dragged elastic cord with two clamps on the underside of the jacket Loop hanger on the collar from the inside Pockets: invoices two lower flat pockets with flaps with Velcro breast inset pockets to warm hands. With a sloping entrance at a comfortable angle, insulated fleece internal pocket for documents with Velcro flap (from the heart), from water resistant fabric
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerClassic bib with pockets sewn under machine gunners Adjustable in size from 46 to 68, whatever the growth Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings Simple X-shaped webbing from a wide sling, crossed behind the. Sewn on front, back at sides fastened 50 mm testexam Duraflex®. The extra ends of the sling collapsed hiding under the ring from the gum The wide belt slings, fastens with 50 mm fastex Duraflex®. The extra end of lines in collapsed view hides under the ring out of the gum. Can accommodate additional equipment (for example, by dumping stores) On the underside of the sewn loops for releasably attaching the unloading/pistol belt 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme pockets sewn to the bib so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets under the VOG-25/VOG-25P, each with a capacity for 2 shots. The individual shots are held inside in the stretch cells. You can use the pocket for other items (e.g., hand grenades or things) 2 pockets under the VOG-25/VOG-25P, each holds 1 shot 2 pockets for bayonet-knife, or 1 of the CPR. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. 3 pockets for hand grenades (2 sewn on the sides, 1 on the left shoulder strap front). Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 large pocket for flat items (map, scarf, etcp.) with the entrance at the top Total saturation: 1) 8 stores the AKM/AK-74 or 4 RPK/RPK-74 2) 10 VOG-25/VOG-25P 3) 1-bayonet 4) 3 or 4 (without the bayonet) RSP 5) 3 hand grenades REVIEWS: Custom modification from Vladislav Boychuk (tankist_sssr) Review from DragunBreath on www.youtube.com (ENG)
Specifications: Specifications: Fabric Poly Oxford 550D RipStop Fabric bottom Poly Oxford PU 240 Weight (kg) 1,14 Volume (l) 75 Height-width-depth, cm 72 x 52 x 28 Product information: Multi-functional backpack and hunting. Not only stylish, but also quite easy to use. Its main volume and two large side pockets that will accommodate everything you need for fishing or hunting. Vertical softening insert, will add rigidity to the back of the backpack, in the floating valve pocket for small items, belt sling is made in removable form, added elastic lacing on the front of the backpack. Possible the suspension of additional equipment outside. Ideal colors for suits "the Huntsman", "eagle", "Polygon", "forest" and "hunter". Find for lover of active recreation! durable fabric with waterproof impregnation to correct fixation of the straps of the backpack and prevent them from slipping Key features Purpose: for hunting and fishing Number of straps: 2 Type of construction: soft Chest coupler: no Waist belt: there Volume: 75 l Side screed: no Ventilated straps: no Back vent: no Weight: 1.2 kg Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: no Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
Specifications: Specifications: Float valve Suspension ABS 1 Fabric Ripstop Poly Oxford Protective case Mounts mountain equipment Chest coupler Waterproof zipper Air Mesh Duraflex Fittings Reflective piping Tack Lateral couplers Weight (kg) 2,34 Volume (l) 80 Height-width-depth, cm 100 x 32 x 26 Product information: Durable backpack of great volume for classic tourism. You can not limit yourself in the number of things, after all, this roomy backpack with two zippered pockets, mesh pockets for water bottle and small things on both sides of the backpack as well as a volumetric valve. Your back will not get tired during long passages with a convenient hanging system, specially designed to carry heavy loads. Raincoat, warm or shoes will be always at hand with a mesh pocket and elastic drawstring on the top of my rucksack. Easy loading backpack in transport is ensured by three reinforced handles. If the path will catch the rain or snow does not matter! In a special pocket on the bottom of the backpack Packed rainproof germogena. On the ends of the side ties have Velcro to secure the excess straps.   durable fabric with waterproof impregnation         mesh material, wicking away from your body. Used on straps, the backrest and the belt of the backpack         Reflective piping for safety in the dark         removable cover to protect from moisture and dirt, placed in a special pocket of my backpack         to correct fixation of the straps of the backpack and prevent them from slipping         Zipper special design for protection from moisture         reliable and convenient fixing your gear outside the pack Key features Purpose: tracking Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 80 l Side screed: there Ventilated straps: no Back vent: there Weight: 1.9 kg Height: 100 cm Width: 32 cm Thickness: 26 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: there Partition in the main compartment: there Side entrance: no Side pockets: there Front pocket: no Detachable pockets: no Laptop compartment: no Reflective elements: there Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: fabric with waterproof impregnated, waterproof zipper
Specifications: Specifications: Fabric Poly Oxford PU 550D RipStop Fabric bottom Poly Oxford PU 240 Volume (l) 80 Height-width-depth, cm 90 x 40 x 35 Product information: Roomy backpack for hunting and fishing The adjustable suspension system of backpacks this model is very simple and does not require time for adjustment. Wide waist belt is fixed on the thighs, taking care to 80 percent weight. Handy pocket on the front and side pockets for long items.   durable fabric with waterproof impregnation Key features Purpose: for hunting and fishing Number of straps: 2 Type of construction: soft Chest coupler: there Waist belt: there Volume: 80 l Side screed: there Ventilated straps: no Back vent: no Weight: 1.3 kg Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: fabric with waterproof impregnation
Specifications: Specifications: Suspension Air Flow Fabric Poly Oxford 300D Ripstop Mounts mountain equipment Chest coupler The possibility of mounting the drinking system Ventilation straps Tack Lateral couplers Elastic pockets Weight (kg) 1,49 Volume (l) 45 Height-width-depth, cm 63 x 38 x 23 Product information: You will be pleasantly surprised by the innovative system of draw-in issues of scope of this stylish modern backpack is made from a lightweight nylon fabric. The most comfortable suspension ensures ventilation system Air Flow, providing a space between backpack and back. Necessary in transitions things easily fit in the elastic pocket on the front of the backpack. If you wanted to drink, you can do not paying attention, because in the backpack there was a compartment for drinking system. Fans to walk with trekking poles will undoubtedly be fixing this equipment. On the ends of the side ties have Velcro to secure the excess straps.     Key features Purpose: tracking Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 45 l Side screed: there Ventilated straps: there Back vent: there Weight: 1.6 kg Height: 63 cm Width: 38 cm Thickness: 23 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: there Rain cover: no Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
Specifications: Specifications: Capacity (people) 6 Frame materials Fiberglass 9,5/11 mm Design Arc Fabric awning 150D Oxford 3000, Mesh Floor fabric Tarpauling Fabric tents Poly Taffeta 190T breathable Stand Steel Taped seams awning Mosquito net Pockets Windproof skirt Transparent window Weight max. (kg) 17,16 Awning water resistance (mm/V.article) 3 000 The dimensions of the bags 68 x 30 x 30 cm Product information: Great camping with 3 rooms and a very large vestibule Three sleeping compartments, flow-through ventilation. Possible separate installation of an awning. Consists of 3 beds sizes: 120 width* length 210* 110 overall height and a large vestibule. Manual (pdf file) General characteristics Purpose: camping Inner tent: there Number of places: 6 Type of frame: external Geometry: custom Design The number of inputs / rooms: 1 / 3 Number of vestibules: 1 Ventilation Windows: there Windows: there Interior pockets: there Storm delays: there Canopy: there The possibility of mounting the flashlight: there Protection The water resistance of an awning: 3000 mm V.article Sealing joints: taped Wind/snow skirt: there Mosquito net: there Materials The material of an awning: polyester (150D PU Oxford) The material of the bottom: polyethylene (Tarpauling) Inner tent material: polyester (190T Taffeta PU) The material of arches: fiberglass Diameter of arcs: 9.5 mm / 11 mm Dimensions and weight Dimensions outer tent (LxWxH): 590x490x190 cm Dimensions Packed (LxWxH): 68x30x30 cm Weight: 19.05 kg Additional information: stand 16mm steel
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Classic with sewn pockets for gear Rifleman and cells PALS for mounting additional pouches Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings The jacket fastens with a zipper reinforced tractor long skill of braiding. Zipper for secure closed with a strap with Velcro to protect from pollution and removal of the load On the underside of the sewn loops for releasably attaching the unloading/pistol belt Adjusting the size of vest (from 46 to 68) is located on the sides of the lumbar panel and are made using slings and trendeleva buckles Duraflex®, you can adjust the size directly into put on the vest. With each side on three lines. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum Adjustment increase (from 164 to 200 cm) is located on the bottom edge of the Basque is back and with two vertical lines and trendeleva buckles Duraflex® connecting the yoke and lumbar panel. You can set up right for wearing on a vest. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum On top of the flirt-stitched loop slings evacuation and PALS – 6 cells in width, 3 rows in height slings (sewn completely to each other without gaps) On lumbar panel stitched two semi-rings Duraflex® suspension with bread bags on hooks-carabiners and slings PALS – 6 cells in width, and 7 rows in height slings (sewn completely to each other without gaps) Top stitched at shoulders limiters and automatic belt PALS webbing on each shoulder by 2 cells wide, 2 rows of lines in height (with the period) 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme vest pocket sewn to the base so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets for hand grenades on his chest. Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 pocket for fireworks on the right side of the trunk. Open top with elastic walls to protect contents from falling out, to carry 3 RB, or 1 RAD or 1 RDG 1 pocket for the bayonet on the left side of the trunk. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. Can be used for carrying 1 RAD or 1 RDG Pocket for fitting of the rubber bands with a buckle on the button, on the left side of the chest near the main zipper Pocket for personal dosimeter on the right side of the trunk near the main zipper and open top 2 inner pockets for flat items (map, scarf, etcp.) with the input of Velcro, provide short-term protection from moisture On the sides of the torso stitched PALS webbing on each side for 3 cells in width, 3 rows of lines in height (with the period)
Specifications: Specifications: Float valve Suspension ABS 1 Fabric Ripstop Poly Oxford Protective case Mounts mountain equipment Chest coupler Waterproof zipper Air Mesh Duraflex Fittings Reflective piping Tack Lateral couplers Weight (kg) 2,42 Volume (l) 100 Height-width-depth, cm 94 x 38 x 26 Product information: Durable backpack of great volume for classic tourism. You can not limit yourself in the number of things, after all, this roomy backpack with two zippered pockets, mesh pockets for water bottle and small things on both sides of the backpack as well as a volumetric valve. Your back will not get tired during long passages with a convenient hanging system, specially designed to carry heavy loads. Raincoat, warm or shoes will be always at hand with a mesh pocket and elastic drawstring on the top of my rucksack. Easy loading backpack in transport is ensured by three reinforced handles. If the path will catch the rain or snow does not matter! In a special pocket on the bottom of the backpack Packed rainproof germogena. On the ends of the side ties have Velcro to secure the excess straps.   durable with waterproof impregnation         mesh material, wicking away from your body. Used on straps, the backrest and the belt of the backpack         Reflective piping for safety in the dark         removable cover to protect from moisture and dirt, placed in a special pocket of my backpack         to correct fixation of the straps of the backpack and prevent them from slipping         Zipper special design for protection from moisture         reliable and convenient fixing your gear outside the pack Key features Purpose: forwarding Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 100 l Side screed: there Ventilated straps: no Back vent: there Weight: 2.1 kg Height: 94 cm Width: 39 cm Thickness: 26 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: there Partition in the main compartment: there Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: there Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: waterproof zipper
Specifications: Specifications: Fabric Poly Oxford 550D RipStop Fabric bottom Poly Oxford PU 240 Weight (kg) 0,91 Volume (l) 55 Height-width-depth, cm 50 x 33 x 37 Product information: Universal for chassis hunting and fishing Lightweight, compact backpack for hunting or fishing. Fifty-five liters of useful volume can easily accommodate a supply of clothes, a set of equipment, utensils and food. Compression straps with clasps "Fast" on each side allow you to tighten the gear side pockets with adjustable volume, and in the mesh pocket can be placed, for example, a raincoat. Belt webbing made in a removable form. Vertical softening insert, additionally stiffens the back of the backpack. durable fabric with waterproof impregnation Key features Type: unisex for hunting and fishing Suspension system: anatomical Volume: 55 l Side screed: there Functionality Pockets: side pockets, front pocket Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Specifications: Specifications: Float valve Suspension ABS V2 Fabric Poly Oxford 420D Ripstop Protective case Mounts mountain equipment Chest coupler Waterproof zipper The possibility of mounting the drinking system Lateral couplers Elastic pockets Weight (kg) 1,96 Volume (l) 60 Height-width-depth, cm 68 x 38 x 25 Product information: If You are tired of ordinary backpacks and soul "holiday requests", then the black Hole is exactly what you need. The backpack will be with you a single whole, because its suspension system has increased the width of the straps and finely tuned under body structure lightweight 3D belt. There is a desire to get something in your backpack without undoing the top flap? Please! Comfortable bottom and the side entrance will help. Need something to remove or not wear? Any required transition clothes can be stored in a special sealed pocket on the front of the backpack. All fans of walking with trekking poles will undoubtedly be mounting, and for this inventory. THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN THE PRODUCT DESIGN WITHOUT PRIOR NOTICE. durable fabric with waterproof impregnation to correct fixation of the straps of the backpack and prevent them from slipping Zipper special design for protection from moisture reliable and convenient fixing your gear outside the pack Key features Purpose: tracking Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 60 l Side screed: there Ventilated straps: no Back vent: there Weight: 2 kg Height: 68 cm Width: 38 cm Thickness: 25 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: there Partition in the main compartment: no Side entrance: there Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: waterproof zipper
Specifications: Specifications: Suspension ABS V2 Fabric Poly Oxford 600D RipStop Protective case Mounts mountain equipment Chest coupler Accessories Nifco Reflective piping Tack Weight (kg) 2,2 Volume (l) 65 Product information: "Alpha" is the first letter in the alphabet a real tourist! Reliable tours and travels. The strength of the design is time-tested. Model with collapsible pockets on the sides and a floating valve that allows you to change the volume of the backpack, has everything you need for attachment of additional equipment. Packed in a special pocket on the bottom of the backpack. Key features Purpose: tracking Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 65 l Side screed: there Ventilated straps: no Back vent: there Weight: 2.35 kg Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: there Partition in the main compartment: there Side entrance: no Side pockets: there Front pocket: no Detachable pockets: no Laptop compartment: no Reflective elements: there Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
Specifications: Specifications: Float valve Suspension ABS 2 Fabric Poly Oxford 600D RipStop Protective case Mounts mountain equipment Chest coupler Waterproof zipper Air Mesh Duraflex Fittings Reflective piping Tack Weight (kg) 2,31 Volume (l) 95 Height-width-depth, cm 100 x 32 x 30 Product information: Universal for mountain tourismYou will be very convenient to move on rough terrain with new lightweight suspension system ABS2, evenly distributing weight on shoulders and waist, and reduces the load on the spine. For convenience of fastening of the mining equipment has developed a new hitch system. If you need something to get from the bottom of the backpack take advantage of the lower entrance. You have nowhere to put the card so it does not wrinkle? In the Yukon backpack has a special pocket for maps and documents on the front of the backpack. In the mountains the weather is changeable, sudden rain, but your belongings will stay dry thanks to ermochenko located in a special pocket in the bottom of the backpack. On the ends of the side ties have Velcro to secure the excess straps durable fabric with waterproof impregnation rugged and reliable hardware from world leader () mesh material, wicking away from your body. Used on straps, the backrest and the belt of the backpack Reflective piping for safety in the dark to correct fixation of the straps of the backpack and prevent them from slipping Zipper special design for protection from moisture reliable and convenient fixing your gear outside the pack removable cover to protect from moisture and dirt, placed in a special pocket of my backpack Key features Purpose: forwarding Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 95 l Side screed: there Ventilated straps: no Back vent: there Weight: 2.3 kg Height: 100 cm Width: 32 cm Thickness: 30 cm Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: there Partition in the main compartment: there Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: there Pocket for points: no Conclusion drinking systems: no Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: fabric with waterproof impregnated,
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing Used stainless button May be upgraded with a jacket hood, collar and liner Pockets: 2 chest, 2 downstairs and 1 internal Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
The backpack is equipped with 4 external pockets. The harness consists of a padded shoulder straps of adjustable length, made of a material with a ventilated mesh structure. The shoulder covers comfortek provided for damping vertical oscillations. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 30 liters MATERIALS OXFORD 600 TEX
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size Warm bib will not leave the slightest loophole cold, especially if it is included with jackets "Delta" or "M4". Made of durable, windproof and water-repellent Oxford fabric (100% nylon with coating) it will become your reliable protection in the service, work or rest. In the overalls with the cold, snow and wind are not afraid of you. Insulation – synthetic fiber (150 g/m2) does not absorb moisture and is not afraid to frequent washings. In contrast to the expensive membrane fabrics and down insulation, these materials do not require complex care.
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
Jacket "Svyatogor" protect you from wind and snow. The insulation keeps the body warm, has a low weight in comparison with analogues. Temperature of the product can change otstavnov inner insulated lining. FEATURES Protection from the cold MATERIALS Insulation "Fibersit" Oxford
Specifications: Specifications: Frame materials Steel Fabric awning 150D Oxford 3000, Mesh Taped seams awning Mosquito net Hanging shelf Windproof skirt Weight max. (kg) 18,35 Awning water resistance (mm/V.article) 3 000 The dimensions of the bags 95 x 25 x 25 cm Product information: Legendary frame tent gazebo Two entrances from different sides. Walls made from mosquito nets are duplicated with waterproof fabric. Light dome allows light and heat. Installation instructions
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 45 liters MATERIALS OXFORD 600 TEX
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 45 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 45 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 45 liters MATERIALS OXFORD 600 TEX
The backpack is equipped with 4 external pockets. The harness consists of a padded shoulder straps of adjustable length, made of a material with a ventilated mesh structure. The shoulder covers comfortek provided for damping vertical oscillations. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 30 liters MATERIALS OXFORD 600 TEX
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
The backpack is equipped with 4 external pockets. The harness consists of a padded shoulder straps of adjustable length, made of a material with a ventilated mesh structure. The shoulder covers comfortek provided for damping vertical oscillations. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 30 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
Технические характеристики: Технические характеристики: Ткань Основные материалы/ткани: 420D Poly Oxford с двойным PU покрытием; Дополнительные материалы/ткани: 600D Poly Oxford с двойным PU покрытием Грудная стяжка Держатель для ключей Светоотражающие элементы Органайзер Вес (кг) 0,67 Объем (л) 20 Высота-ширина-глубина, см 45x24x23 см Информация о товаре: Городской рюкзак "Раш 20" - обновленная модель.  Исключительно легкий и практичный с удобными сетчатыми карманами на фронтальной части, «дышащей» подвесной системой и прочной фурнитурой  Nifco . Яркости впечатлений от прогулки добавит цветовая гамма моделей «Раш».  Во внешнем кармане – органайзер. Идеален для прогулок по городу и активного отдыха. «Раш» - выбор Ваш!   Отличия в новой модели:  Добавлены боковые стяжки на фастах Улучшена эргономика спины Ручка для переноски теперь большая и удобная     Основные характеристики Назначение: городской Число лямок: 2 Тип конструкции: анатомический Грудная стяжка: есть Поясной ремень: есть Объем: 20 л Боковая стяжка: нет Вентилируемые лямки: нет Вентиляция спины: нет Функциональность Складной стул: нет Верхний клапан: нет Регулируемый клапан: нет Верхний карман: нет Нижний вход: нет Перегородка в основном отделении: нет Боковой вход: нет Боковые карманы: нет Фронтальный карман: нет Отстегиваемые карманы: нет Отделение для ноутбука: нет Светоотражающие элементы: есть Карман для очков: нет Вывод питьевой системы: нет Накидка от дождя: нет Крепление для ледоруба: нет Крепление для скейтборда: нет Крепление для сноуборда: нет Крепление для шлема: нет
The backpack is equipped with 4 external pockets. The harness consists of a padded shoulder straps of adjustable length, made of a material with a ventilated mesh structure. The shoulder covers comfortek provided for damping vertical oscillations. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 30 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
Specifications: Specifications: Material (Fabric) Oxford Insulation Thermofibre Finish Polar Fleece Adjustable hood Elastic side insert Pockets for inserting protective ear Inner cuffs Anatomical fit sleeves The collar Ring for gloves Lower temperature - 20 Product information: Cheap winter suit Buying pole N you get not just a costume, a versatile winter suit, ideal for the city, fishing and active rest on the nature in the cold season, K. The pole N is calculated for a temperature of -20C. In winter we all want winter clothes were warm, comfortable, lightweight and especially it is important on a fishing trip when you have little movement. All these qualities suit has the N pole and is one of the main answers to "Why the costume is the N pole?".The suit is sewn very high quality of high-tech fabrics. Characteristic of the jacket: • Jacket has 2 internal and 7 external pockets, which is very convenient while fishing, K. all personal belongings always with you. Pockets are quite large. • Sleeves have an anatomic cut and an internal knitted cuff, which is regulated by Velcro. • Stand-up collar trimmed with Polar Fleece. • Adjustable warm removable capuchon. • Trim reflective edging, which is important in the dark. • A ring for attaching gloves. • Two-way zipper with windproof placket. • Waistband with elastic cord with lock. Overalls feature: • Has adjustable straps, which is convenient for adjusting the overalls to your own growth. • Dvuhtumbovye front zip with protective placket. • Elastic waist and the harness under the strap. • Side elastic insert. • Additional strengthening of the knees, which is very convenient for fishermen dropping a knee on the snow. • Insert pockets for protective inserts. In the costume of the pole N are used high-tech fabric Oxford is a lightweight, durable, water-repellent fabric that protects from water, wind and snow. In used as insulation Thermofibre – a new generation of insulation with improved insulating properties. Lightweight, soft, highly breathable, does not absorb moisture. Purchasing costume pole N you will not be scary any weather and will serve you for a very long time, K. not susceptible to aggressive environmental factors. And all these you get quality at the best price. We give you warm!!!     Adjustable hood will allow you to freely wear the hat all sizes and even a helmet         High stand-up collar protects neck from wind         Anatomical fit sleeves - provides freedom of movement.         The sleeve ends with a cuff, which keeps you warm and gives comfort         Side elastic insert - elegantly fits the shape         Pockets for inserting protective vkladyshi - protect the knees of fishermen from exposure and damage         Plastic ring for fixing small things         Synthetic a new generation of insulation with improved insulating properties. Lightweight, soft, particularly warm, highly breathable, does not absorb moisture         Light and soft fabric with excellent insulating properties. Its thermal properties superior to wool. The unique structure allows the material to hold air, remove moisture from the body, almost does not get wet           High-tech fabric treated with a water repellent composition. Does not lose its elastic properties at low temperatures           Svetovozdushnoy Kant - safety at night            
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 45 liters MATERIALS OXFORD 600 TEX
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing Used stainless button May be upgraded with a jacket hood, collar and liner Pockets: 2 chest, 2 downstairs and 1 internal Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
Seasonality: 3 Number of places: 3 The number of arcs: 3 Dimensions and weight: The dimensions of the outer tent, tent (L×W×In): 315×230×115 cm The sleeper dimensions (L×W×In): 210×165×105 cm Dimensions Packed (L×W×In): 50×20×20 cm Total weight: 3,92 kg Minimum weight (without cover and pegs): 3,62 kg Materials: Outer tent: Polyester 75D/190T 5000 mm Inner tent: Polyester 68D/190T R/S W/R Bottom: Polyester 190T 7000 mm W/R Arc: Aluminium alloy 7001 T6 Ø9.5 mm Accessories: Duraflex Universal external arcs with large internal volume and high wind resistance The awning and can be installed at the same time It is possible to install separately the tent without the inner tent Two entrances, vestibule Plenty of pockets inside the tent The seams of an awning and bottom taped Rope guy wires are interwoven reflective thread Vents on inner tent can be opened and closed without leaving the tent General characteristics Purpose: tracking Inner tent: there Number of places: 3 Type of frame: external Geometry: hemisphere Design The number of inputs / rooms: 2 / 1 Number of vestibules: 2 Ventilation Windows: there Windows: no Storm delays: there Canopy: no Protection The water resistance of an awning/bottom: 6000 / 8000 mm V.article Sealing joints: taped Wind/snow skirt: there Mosquito net: there Materials The material of an awning: polyester (75D 195Т) The material of the bottom: polyester (150D Oxford) Inner tent material: polyester (Taffeta 185T) The material of arches: alloy aluminium (7001-T6) Diameter of arcs: 8.5 mm Dimensions and weight Dimensions outer tent (LxWxH): 355x230x140 cm Dimensions inner tent (LxWxH): 165 cm Weight: 4.4 kg
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing May be upgraded with a jacket hood, collar and liner Used stainless button Pockets: 2 chest pockets and 2 at the bottom of the jacket 1 inside pocket Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
Specifications: Specifications: Fabric Poly Oxford PU 550D RipStop Fabric bottom Poly Oxford PU 240 Weight (kg) 0,8 Volume (l) 70 Height-width-depth, cm 55 x 45 x 33 Product information: Lightweight, compact backpack for hunting and fishing Honored veteran and sales leader in its series. Simple, reliable, time-tested and kilometers of roads. The compactness of the backpack will provide maneuverability, and accurately adjusted height of attachment of the shoulder straps and the absence of high upper valve will expand the review.   durable fabric with waterproof impregnation Key features Purpose: for hunting and fishing Number of straps: 2 Type of construction: soft Chest coupler: no Waist belt: no Volume: 70 l Side screed: no Ventilated straps: no Back vent: no Weight: 0.8 kg Functionality Folding chair: no The top flap: there Adjustable valve: no Top pocket: no Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: fabric with waterproof impregnation
Specifications: Specifications: Fabric Poly Oxford PU 550D RipStop Fabric bottom Poly Oxford PU 240 Weight (kg) 0,65 Volume (l) 50 Height-width-depth, cm 50 x 50 x 22 Product information: Lightweight, compact backpack for hunting and fishing Honored veteran and sales leader in its series. Simple, reliable, time-tested and kilometers of roads. The compactness of the backpack will provide maneuverability, and accurately adjusted height of attachment of the shoulder straps and the absence of high upper valve will expand the review.   durable fabric with waterproof impregnation Key features Purpose: for hunting and fishing Number of straps: 2 Type of construction: soft Chest coupler: no Waist belt: no Volume: 50 l Side screed: no Ventilated straps: no Back vent: no Weight: 0.7 kg Functionality Folding chair: no The top flap: there Adjustable valve: no Top pocket: no Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
Specifications: Specifications: Material (Fabric) Nylon Oxford Insulation Termo MAX Lining Polar Fleece Adjustable hood Elastic side insert Snow clutch Inner cuffs Adjusting the width of the bottom of trousers Anatomical fit sleeves Anatomical in the knee region The collar Ring for gloves Moisture, mm 10 000 The water vapor permeability./m.square/24hours 10 000 Weight (kg) 3,98 Lower temperature - 35 Product information: The suit adapted and SnowmobilingWarm suit consisting of a jacket and overalls. Jacket with Central zipper dusakova. Vosimi external pockets: four insulated trucks, with four Welt waterproof zippers. Anatomically cut sleeves, internal knitted cuffs. Adjustable hood with rigid peak. Windproof skirt. Bib with an anatomic cut in the knee. Side stretch insert on waist; two chest pockets, two pockets at the hips, with waterproof zipper. Strengthening the knee and back. Snow clutch. Fabric with a membrane, special insulation Termo MAX. Taped seams. The suit is Packed in a special bag. Adjustable will allow you to freely wear the hat all sizes and even a helmet Stand-up collar ring for gloves Anatomic sleeves - provides freedom of movement The sleeve ends with a cuff, which keeps you warm and gives comfort Side elastic insert - elegantly fits the shape Anatomical in the knee region Adjustable width press. You can tighten the width of the feet, or Vice versa, cover top shoes Snow clutch
Specifications: Specifications: Capacity (people) 2 Frame materials Frostproof fiberglass 8.5 mm Design Machine Fabric awning 210Т Polyester PU 2000 Pockets Windproof skirt Transparent window Weight (kg) 3,5 Awning water resistance (mm/V.article) 2 000 The dimensions of the bags 107 x 12 x 13 cm Product information: Quick installation! More time for fishing!Thanks to "umbrella frame" tent is to put one hand in seconds!Internal pockets can accommodate all the necessary equipment. In the tent maximum light even on cloudy days. For the comfort of the angler thought out ventilation system Bright elements protect the fisherman   Tent for fishing seal V2 with quick-frame. The frame made of cold-resistant fiberglass consists of four faces, and forms a tent of the umbrella type. This design is durable, reliable and resistant to wind. Very quickly revealed and established. The tent is mobile, easily moved from one place to another, with no need to fold. Seal V2 recommended to fans of fishing in the winter.The tent is made of 210T Oxford 2000PU material, reinforced in the right places, the seams are treated with adhesive. The material perfectly passes light, repels water, not afraid of mechanical influences. Completed storm stretch marks. The skirt is closed and double (internal and external) that ensures a tight connection with the surface and does not allow wind to get inside. The entrance to the big tent, zipper. Two locks help to quickly unbutton or zip up the zipper, as well as regulate the flow of air when heated tents. The vent valve is designed so as to regulate the outflow of air, but you can completely close the valve. There are pockets on the two walls of the tent, which will house the gear. This tent can be heated, observing, of course, security measures. The set includes a bag, closing the zipper.
Manufactured in accordance with TU 8572-092-31041642-01. Designed for traffic police On the chest Chevron "traffic police" On the back the logo "POLICE" and "DPS" On the sleeve "RUSSIA MIA" and "Badge for employees of police departments"
External size: 10,5×12×7 cm Internal size: 10×12×7 cm Weight: 101 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the box of hunting cartridges, zip and Velcro closure Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height The shape and size is perfect to carry standard boxes of 25 rounds 12 gauge (70 mm) The pouch is closed with the cover cap on two-way zipper, snaps on top of the Velcro flap. As a result the contents of the pouch protected from ingress of water and dirt At the bottom, the rear wall and the lid of the pouch is used the lining fabric Oxford 210d (100% nylon) and a layer of soft foam At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Specifications: Specifications: Fabric 600D oxford TPU Duraflex Fittings Weight (kg) 0,2 Height-width-depth, cm 26 x 13 x 6.5 Product information: All with fishing. Light and compact waist bag for fishermen who prefer active fishing and moving on is easier! It easily accommodate a couple of boxes under the bait, documentyou and other useful fishing stuff. And due to the fact that the bag is waterproof, do not fear for its contents, even in heavy rain!  
Specifications: Specifications: Fabric 600D oxford TPU Chest coupler Duraflex Fittings Waist belt with pockets Weight (kg) 1,42 Height-width-depth, cm 66 x 36 x 36 Product information: 100% waterproof backpack! You are going on a long fishing trip? On foot or by boat? It doesn't matter! With a backpack "brim" will be comfortable in any case! Besides that the backpack is 100% waterproof and all your stuff will be under reliable protection in any weather, he has a lot of useful things! Pocket and loop for rods or spinning rods, two waterproof pockets, carrying handle. The harness of the backpack is simple and very easy to fit any figure, and with a waist and chest strap, even very heavy weights seem weightless!
Specifications: Specifications: Suspension Air Flow Fabric Poly Oxford 420D Ripstop Mounts mountain equipment Tack Lateral couplers Elastic pockets Weight (kg) 0,87 Height-width-depth, cm 49 x 33 x 18 Product information: Backpack for sports and active recreation with an improved structure of the back For comfort wearing has comfortable pillows system Air Flow. In transport prevents the belt? Just remove it and leave the house. Now you don't need to think about if you packing! If you want something to get from the bottom of a backpack, you always can do it through the lower entrance. The volume of the main compartment adds a great elastic pocket on the front and two side pockets of the backpack. A nice bonus for the owner is the compartment for drinking system.       durable fabric with waterproof impregnation         rugged and reliable hardware from world leader                     to correct fixation of the straps of the backpack and prevent them from slipping         reliable and convenient fixing your gear outside the pack Key features Purpose: multi Number of straps: 2 Type of construction: anatomical Chest coupler: there Waist belt: there Volume: 25 l Side screed: there Ventilated straps: no Back vent: there Height: 49 cm Width: 33 cm Thickness: 18 cm Functionality Folding chair: no The top flap: no Adjustable valve: no Top pocket: no Bottom entry: there Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: there Rain cover: there Attachment for ice axes: there Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no Additional information: fabric with waterproof impregnation
Size: 27×8,5×5.5 cm Weight: 196 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RPK shops, on the silent castle. Discontinued, replaced with magazine Pouch for 2 MAG. V PKK.3 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two RPK or RPK-74 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Specifications: Specifications: Fabric Poly Oxford PU 550D RipStop Fabric bottom Poly Oxford PU 240 Volume (l) 100 Height-width-depth, cm 95 x 32 x 29 Product information: In the new version of this model - Backpack "Bear v 100.2" Roomy camouflage backpack for hunting and fishing. The adjustable suspension system of backpacks this model is very simple and does not require time for adjustment. Wide waist belt is fixed on the thighs, taking care to 80 percent weight. Handy pocket on the front and side pockets for long items.   durable fabric with waterproof impregnation Key features Purpose: for hunting and fishing Number of straps: 2 Type of construction: soft Chest coupler: there Waist belt: there Volume: 100 l Side screed: there Ventilated straps: no Back vent: no Weight: 1.4 kg Functionality Folding chair: no The top flap: there Adjustable valve: there Top pocket: there Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Weight: 186 g Material: Cordura®1060d (100% nylon) Oxford 210d (100% nylon) Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. Discontinued, replaced by the under the gas mask Pouch/Luggage Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height Pouch latest generation fastens with a buckle "AAT", the ability to adjust. The old generation used a clasp with two buttons At the top of the valve from the inside sewn a small, flat pocket of fabric 210d Oxford with Velcro for kit anti-fog films for the lenses of a gas mask The pouch can be used as Luggage The outer surface is sheathed cells PALS/MOLLE for attachment of additional pouches The top of the rear metal loop for hanging on the strap CPF At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Specifications: Specifications: Fabric 900D TPU oxford Duraflex Fittings Weight (kg) 0,8 Height-width-depth, cm 28 x 25 x 20 Product information: Your equipment protected! Tough and waterproof case for fishing tackle. Perfect for fishing from a boat, when there is no time to monitor the condition of your expensive gear.In case they are safe, whether it is a strong wave, rolling or the rain! One large compartment will accommodate reels, binoculars, bite alarms etc...  
Specifications: Specifications: Fabric 900D TPU oxford Duraflex Fittings Weight (kg) 1 Height-width-depth, cm 40 x 27 x 42 Product information: Large waterproof bag will serve as a great helper for fishing when you caught the bad weather, and for fishing from a boat! Will easily hold a change of clothes for you and your friend, now you do not need to put dirty clothes in the trunk of the car or shove it in bags, just use the Barrel bag PRO, it is 100% waterproof and will help in any situation.
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerClassic bib with sewn pockets under the gear Rifleman Adjustable in size from 46 to 68, whatever the growth Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings Simple X-shaped webbing from a wide sling, crossed behind the. Sewn on front, back at sides fastened 50 mm testexam Duraflex®. The extra ends of the sling collapsed hiding under the ring from the gum The wide belt slings, fastens with 50 mm fastex Duraflex®. The extra end of lines in collapsed view hides under the ring out of the gum. Can accommodate additional equipment (for example, the pouch under the reset stores) On the underside of the sewn loops for releasably attaching the unloading/pistol belt 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme pockets sewn to the bib so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets under the VOG-25/VOG-25P, each with a capacity for 2 shots. The individual shots are held inside in the stretch cells. You can use the pocket for other items (e.g., hand grenades or things) 2 pockets under the VOG-25/VOG-25P, each holds 1 shot 2 pockets for bayonet-knife, or 1 of the CPR. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. 3 pockets for hand grenades (2 sewn on the sides, 1 on the left shoulder strap front). Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 large pocket for flat items (map, scarf, etcp.) with the entrance at the top Total saturation: 1) 8 stores the AKM/AK-74 or 4 RPK/RPK-74 2) 10 VOG-25/VOG-25P 3) 1-bayonet 4) 3 or 4 (without the bayonet) RSP 5) 3 hand grenades REVIEWS:  Custom modification from Vladislav Boychuk (tankist_sssr) Review DragunBreath on www.youtube.com (ENG)
Specifications: Specifications: Material (Fabric) Oxford 210D Insulation Foam Weight (kg) 0,13 Product information: Knee pads with adjustable length clasp. Set consists of 2 pieces.Protects clothing from dirt and abrasion, protects the knee from injury and hypothermia can easily be worn over trousers. Knee pad width - 18 cm, length - 30.5 cm Knee braces - an indispensable thing for winter fishing. Keep your knees healthy!
Specifications: Specifications: Weight (kg) 1,04 Height-width-depth, cm 30 x 50 x 30 Product information: Waterproof bag for hunting. Your will remain intact in any weather
Comfortable modern urban backpack “azimuth” (Prival) with soft anatomical backrest. Designed for everyday use, as well as one-to two-day hikes. On the sides there are two pockets with elastic band that allows you to press things tightly to the backpack. Consists of one large compartment with three pockets (one under paper size is A4, the second and the third under small objects, one of which has a separate access from the outside via zipper). Outside, in the front, the backpack has a small zippered pocket on the right side. Soft anatomical back, wide shoulder straps and wide waist belt enhance comfort and reduce the load on the back during prolonged wearing of the backpack.Features: Purpose:  weekend trips, everyday use Execution: Soft Straps: 2 PCs Type: unisex Weight: 850 gr Height: 45 cm Width: 28 cm Thickness: 12 cm Volume: 30 liters Capacity: up to 10 kg Fabric: Poly Oxford 600D PU RipStop Fabric of bottom: black PU Poly Oxford 600 Color: red, light gray Key features Type: unisex urban Suspension system: anatomical waist belt Volume: 30 l Side screed: no Weight: 0.85 kg Dimensions (Wksht): 45х28х12 cm Color: red, gray Functionality Pockets: side pockets, front pocket Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Specifications: Specifications: Fabric Poly Oxford PU 550D RipStop Fabric bottom Poly Oxford PU 240 Weight (kg) 0,69 Volume (l) 35 Height-width-depth, cm 51 x 30 x 24 Product information: Lightweight, compact backpack for hunting and fishing Honored veteran and sales leader in its series. Simple, reliable, time-tested and kilometers of roads. The compactness of the backpack will provide maneuverability, and accurately adjusted height of attachment of the shoulder straps and the absence of high upper valve will expand the review.   durable fabric with waterproof impregnation Key features Purpose: for hunting and fishing Number of straps: 2 Type of construction: soft Chest coupler: no Waist belt: no Volume: 35 l Side screed: no Ventilated straps: no Back vent: no Weight: 0.7 kg Functionality Folding chair: no The top flap: there Adjustable valve: no Top pocket: no Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Specifications: Specifications: Fabric 420D Poly Oxford with double PU coating, 600D Poly Oxford with double PU coating Protective case Chest coupler Air Mesh Duraflex Fittings Reflective piping The possibility of mounting the drinking system Ventilation straps Tack Waist belt with pockets Lateral couplers Weight (kg) 1,75 Volume (l) 55 Height-width-depth, cm 65 x 32 x 22 Product information: Comfortable 3D waistband is adjustable under the structure of the body. Comfortable pillows system Air Flow. Large pocket on the front, large side pockets and pockets at the waist allow you to put everything you need.At the bottom of the backpack there is a system of fastening of additional equipment.Included in the set germogena, which will reliably protect from the rain.      
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and 1 under the radio 2 bottom pockets and 1 inside pocket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated - CLOSEOUT Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories:Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size: 17×23×4.5 cm Weight: 350 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Large pouch-an organizer for convenient placement of small details. Thanks to its removable transparent cover for maps can be used as a tablet Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to three horizontal rows of cells in height Use cases: the pouch on the front of the backpacks and satchels, commander's panel/tablet/admin pouch on the front of the bibs and vests, separately bag/mini-briefcase or miniature bib (strap not included) On the front surface of a pocket with horizontal zip and cell PALS/MOLLE for attachment of additional pouches Main compartment with large (type 10) two-way zipper, unbuttoned to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. Zipper sewn double stitching, instead of the metal reeds are used loops of paracord (silent, impossible to break) To the bottom of the inside pouch fastened by Velcro case for cards from transparencies. The case expands in height, and accommodates a sheet size 21×28 cm (A4 paper is 21×29.5 cm). It is particularly convenient to use the card for hanging the organizer on your chest Inside on the front wall of the hinged two big zippered pockets made of durable mesh. They are convenient for carrying small items in bulk, K. the contents visible and protected from loss Inside on the back wall there is a large flat zip pocket (ideal for documents), two open flat pockets and double layer elastic system of cells of different width, allowing to place the various items and tools (pens, markers, flashlights, folding knives, multitools and so onp.) for easy removal. Also in the upper part tabbed ring of webbing and plastic hook-carabiner for hanging small things (keys, key chains and soD.) To the top of the rear wall sewn carry handle and two plastic rings Duraflex® attachment straps (not included) to be worn as a handbag All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Discharge classic vest with sewn pockets for gear Rifleman and cells PALS for mounting additional pouches Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings The jacket fastens with a zipper reinforced tractor long skill of braiding. Zipper for secure closed with a strap with Velcro to protect from pollution and removal of the load On the underside of the sewn loops for releasably attaching the unloading/pistol belt Adjusting the size of vest (from 46 to 68) is located on the sides of the lumbar panel and are made using slings and trendeleva buckles Duraflex®, you can adjust the size directly into put on the vest. With each side on three lines. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum Adjustment increase (from 164 to 200 cm) is located on the bottom edge of the Basque is back and with two vertical lines and trendeleva buckles Duraflex® connecting the yoke and lumbar panel. You can set up right for wearing on a vest. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum On top of the flirt-stitched loop slings evacuation and PALS – 6 cells in width, 3 rows in height slings (sewn completely to each other without gaps) On lumbar panel stitched two semi-rings Duraflex® suspension with bread bags on hooks-carabiners and slings PALS – 6 cells in width, and 7 rows in height slings (sewn completely to each other without gaps) Top stitched at shoulders limiters and automatic belt PALS webbing on each shoulder by 2 cells wide, 2 rows of lines in height (with the period) 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme vest pocket sewn to the base so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets for hand grenades on his chest. Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 pocket for fireworks on the right side of the trunk. Open top with elastic walls to protect contents from falling out, to carry 3 RB, or 1 RAD or 1 RDG 1 pocket for the bayonet on the left side of the trunk. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. Can be used for carrying 1 RAD or 1 RDG Pocket for fitting of the rubber bands with a buckle on the button, on the left side of the chest near the main zipper Pocket for personal dosimeter on the right side of the trunk near the main zipper and open top 2 inner pockets for flat items (map, scarf, etcp.) with the input of Velcro, provide short-term protection from moisture On the sides of the torso stitched PALS webbing on each side for 3 cells in width, 3 rows of lines in height (with the period)
Specifications: Specifications: Fabric 600D oxford TPU Duraflex Fittings Weight (kg) 0,85 Height-width-depth, cm 50 x 25.5 x 13 Product information: All items close at hand and reliable protection! Go fishing and don't know where to put your stuff? With a backpack ABOUT the tencha will not be such problems, especially since it is completely waterproof! Now, if fishing you caught in the rain, all your things will remain intact! There is also a front compartment with a waterproof zipper, side pockets for all things including for rods or spinning rods, a pocket on the belt. The backpack is very simple and reliable suspension system that can be customized to any shape.
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Product information:
You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front "lightning" with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves, the cord for tightening the waist and the bottom of the jacket prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets 2 bottom pockets and 1 internal Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 300 g/m2 It would seem that just bought the kids winter clothes and there it is again... Children grow quickly, and even if it only pleases, but the problem jacket will help you to solve "winter Jacket-S". She easily meets the requirements to children's clothes, which in his short life is quite tough operation. Warm, durable, windproof and water-repellent due to the used in its manufacture Oxford fabric (100% nylon with coating), the jacket is a smaller model winter jackets "M4". It is unpretentious and affordable, and when combined with "jump suit insulated-S" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber is polyester, unlike down not nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. So you will not be superfluous to relive themselves and to pull the child if after school he would climb up on the construction site or have a walk all day with ice slides. From the wind and cold will protect him and the front two-way zipper with wind placket and knitted inner cuffs of sleeves, in combination with a lower fastening and a drawstring at the waist. A hood that was not originally attached to a coat, can be purchased separately in the accessories section.? Jacket lovers camouflage, forest men and young hunters. Also, if you bought her eldest child, she will be able to serve your other children, did without losing their functionality in the process of socks.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories:Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size: 17×13,5×4,5 cm Weight: 230 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Medium pouch organizer for easy placement of small things Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Use cases: the pouch on the sides and the front side of the backpacks and satchels, pouch for unloading vests, bibs and CPF, bag on hip belt, separate bag-a man purse (the strap not included) On the front surface of a pocket with horizontal zip and cell PALS/MOLLE for attachment of additional pouches Main compartment with large (type 10) two-way zipper, unbuttoned to the bottom, the opening angle is adjustable removable from the cord and release Duraflex®. The zipper is sewn with double stitching, instead of the metal reeds are used loops of paracord (silent, impossible to break) At the bottom of the elastic pouch cell for mounting objects, is hidden under a grommet for drainage water Inside on the front wall fold-up flat pocket with vertical zipper and two-layer elastic system of cells of different widths (items are laid out horizontally) Inside on the back wall there is a large open flat pocket, a double layered elastic cells of different width (items arranged vertically, narrow cells are ideal for pens and markers), near the bottom is a small open pocket (in it it is possible to set the vertical pieces) and a few elastic cells for horizontal subjects. Also in the upper part of stitched webbing with plastic hook-carabiner for hanging small things (keys, key chains and soD.) To the top of the rear wall sewn carry handle and two plastic rings Duraflex® attachment straps (not included) to be worn as a handbag-borsetki All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance
Manufactured in accordance with TU 8572-092а-31041642-01. Designed for traffic police On the chest Chevron "traffic police" On the back the logo "POLICE" and "DPS" On the sleeve "RUSSIA MIA" and "Badge for employees of police departments"
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing May be upgraded with a jacket hood, collar and liner Used stainless button Pockets: 2 chest pockets and 2 at the bottom of the jacket 1 inside pocket Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
Bottom fabric - 600 Fabric tube - taffeta 190 Size: &empty:20×65 Weight: 70 g
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Specifications: Specifications: Fabric 600D oxford TPU Duraflex Fittings Weight (kg) 0,65 Height-width-depth, cm 30 x 30 x 16 Product information: Functional waterproof waist bag. Perfect for lovers of active wading and fishing! The bag has two large main compartments that can easily accommodate all the necessary boxes with lures, one additional pocket for little things that should be always at hand, and RODHOLDER-holder for spinning, while changing lures, your hands were free!    
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 135 g Size: 14,5×16,5×6 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with zipper with internal organization, square shape. The numbers in the title (4×2) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is perfect little organizer for handling systems and for PALS/MOLLE backpacks zones (zone must be a minimum of 4 cells PALS in width). The pouch is specially designed to be compatible with backpacks of manufacturing the Alloy Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall two volume pockets for small items, on the front wall one large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 285 g Size: 24×23,5×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Large utility pouch with zipper with internal organization, square shape. The numbers in the name (6×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a sugar on the back and unloading systems as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing May be upgraded with a jacket hood, collar and liner Used stainless button Pockets: 2 chest pockets and 2 at the bottom of the jacket 1 inside pocket Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Utilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Warm comfortable shoes for fishermen, hunters and lovers of outdoor recreation. made of durable 900D Oxford nylon. Modern synthetic insulating material called Thinsulate ™ cold weather comfort to the feet and light weight shoes Lightweight and comfortable shoes You can use in everyday wear in an urban setting Outsole made of durable material that retains elasticity at low temperature and has the shape of a tread, slip-resistant Dimensions: 40 - 46
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Turnstile button: YKK STOCKO (Germany) Size (In×W×T): 14×10×3.5 cm Weight: 64 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple holster under attack (Device Metered-dose Aerosol Spray) to mount UniClick Plus suits for a PALS sling and waist belt Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The wall is made from two layers of fabric Cordura® 500d (rear) or layer Cordura® 500d and 210d Oxford (front), between which is sewn a thin hard foam to maintain the shape of the holster Buckle straps with turnstile (unbuttoned with only one lateral direction) button YKK STOCKO. The button is set inside a massive plastic manners, and easier to use clasp All the tissue sections and lines edged or hidden under seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Waistband too high to protect the lower back from the cold The loops wide waist belt Slits with zipper on each side for easy donning shoes Elastic band at the bottom of the pants does not allow them to creep up Two pockets Material: Oxford (Oxford) - 100% nylon with coating Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Boots made of durable 900D OXFORD nylon, provide thermal protection in the dynamics at low temperatures For convenience and leg muscles during prolonged walking on their uppers are available in two adjustable tie with locks The top of the boot is protected from the snow with push-button lock Take out the inserts thickness of 9 mm provides reliable thermal insulation: polypropylene layer wicks moisture away from the body and keeps the warm air Outsole made of durable thermoplastic rubber TPR: retains elasticity at low temperatures; has the shape of a tread, slip-resistant Dimensions: 40 - 46
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons, prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and one pocket under the radio 2 bottom pockets and one internal Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and 1 under the radio 2 bottom pockets and 1 inside pocket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated - CLOSEOUT Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) External size: 14,5×Of 7.5×7 cm Internal size: 14×7×6.5 cm The size of the outer pockets: 7×6.5 cm Weight: 99 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUniversal pouch/for the camera, Velcro, with soft lining to protect the contents Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch is ideal for storing the camera the appropriate dimensions, but it can be used as a universal Luggage Due to the special shape of the valve and tube (is dragged paracord with retainer Duraflex®) the contents of the pouch protected from ingress of water and dirt The main compartment of the pouch protects the contents from shock, being a sandwich of fabric Cordura® 500d, semi-rigid foam layer and lightweight Oxford cloth 210d lining Outside to the side there is a small flat pocket with Velcro closure for storing small items (e.g. memory cards) REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Winter Shoe with Thinsulate insulation® for mountaineering, difficult climbs. Fits over shoes. Do not interfere with the fastenings of cats. Features high, completely hiding the lower leg technological hole for fastening of clips of "cats" front and rear webbing in heel area for added rigidity and ease of use durable zipper along the entire length of doubled strap top adjustable elastic cord with lock Material: PolyOxford 600 Inner fabric: Oxford 210 Gain: Cordura Insulation: Thinsulate The size of the soles on the patterns: S - 29.5cm M - 31.5cm L - 33.5cm XL -35.5cm  
Volume: 10 l Weight: 0.6 kg The fabrics used are: 600D Polyester / Nylon Oxford 150D R/S Accessories: Duraflex® Easy functional urban backpack The entrance to the main volume zip Back with Central ventilation channel Front pocket with simple internal organization Large side pockets of elastic mesh Extra internal pocket for documents or small things Removable, adjustable waist belt
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Warm socks-chuni for overnight stays Durable outsole Oxford fabric, can be used as a standalone item of footwear a short time. The adjustable top inner seams do not RUB your feet. Material: Resist-DT® Inner fabric: Resist-DT® Gain: Cordura® 1000 Insulation: Thinsulate  
Weight: 20 g Size (W×In): 14×19 cm Material: 150D Nylon Oxford TPU Very compact and lightweight waterproof wallet Attention! Waterproof zipper is not 100% protection from moisture penetration REVIEWS: Review the website "Russel" Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Warm comfortable for fishermen, hunters and lovers of outdoor recreation. Boots made of durable 900D Oxford nylon. Modern synthetic insulating material called Thinsulate ™ cold weather comfort to the feet and light weight shoes Lightweight and comfortable shoes You can use in everyday wear in an urban setting Outsole made of durable material that retains elasticity at low temperature and has the shape of a tread, slip-resistant Dimensions: 40 - 46
Waistband too high to protect the lower back from the cold The loops wide waist belt Slits with zipper on each side for easy donning shoes Elastic band at the bottom of the pants does not allow them to creep up Four pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size Warm, durable, windproof and water-repellent due to the used in their manufacture Oxford fabric (100% nylon with coating), trousers combined with jackets "Delta" or M4, but other options are possible. In these pants the cold, snow and wind are not afraid of you. Insulation – synthetic fiber polyester wadding (150 g/m2) does not absorb moisture and is not afraid to frequent washings. In contrast to the expensive membrane fabrics and down insulation, these materials do not require complex care. Service, work or leisure in the fresh air will be much nicer, if you are ready for the bad weather.
Volume: 60 l Weight: 1350 g Dimensions (W×T×B): 40×25×65 cm Material: Nylon 420D TPU Accessories: Duraflex Average volume, fully-sealed tracking This backpack is made by "welded" technology. All seams are sealed The entrance to the main volume is closed by a twist, as classic dresses, which ensures complete tightness of the backpack Molded back provides great ventilation while carrying the backpack and practically does not absorb moisture due to the lack of elements from the foam All "power" places an additional duplicated layer fabric Two additional carrying handles on the sides of the backpack The backpack has an air valve to bleed excess air
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size Warm bib will not leave the slightest loophole cold, especially if it is included with jackets "Delta" or "M4". Made of durable, windproof and water-repellent Oxford fabric (100% nylon with coating) it will become your reliable protection in the service, work or rest. In the overalls with the cold, snow and wind are not afraid of you. Insulation – synthetic fiber polyester wadding (150 g/m2) does not absorb moisture and is not afraid to frequent washings. In contrast to the expensive membrane fabrics and down insulation, these materials do not require complex care.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. hand enters from the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: LibertyВ® (the Netherlands) filament nylon bonded Material:CorduraВ® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: DuraflexВ® Lightning: SBSВ® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size: Of 13.5Г—6Г—19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Pouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper DuraflexВ®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Weight: 20 g Size (W×B×T): 6×12×2 cm Material: 600D Oxford Polyester TPU Accessories: Duraflex® Small waterproof (pouch) for telephone, radio and T.p. Manufactured by "weld" technology. All seams are sealed The pouch can be fastened to the strap of a backpack with the rifle or worn on your belt The front surface has a transparent window Attention! Waterproof zipper is not 100% protection from moisture penetration
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 24,5×22×12 cm Weight: 506 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Classic bread bag (butt pack). Discontinued, replaced by the v bag of Crackers.2 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height The bag is equipped with a tube of light fabric Oxford 210d tightly laced paracord and lock Duraflex® The flap fastens with two fastex Duraflex®, with the possibility of tightening. On the valve there is a carry handle The bag is equipped with contractions from a sling with tehsilimi buckles Duraflex® for attachment of additional equipment (e.g. sleeping Mat), twin flap top, two on the bottom below Rings of elastic bands for fixing the superfluous ends of lines of all contractions Lining – fabric Oxford 210d. In the side walls sewn-in plastic inserts to maintain the shape (for example, when carrying machine-gun belts) Two semi-rings Duraflex® suspension straps to the CPF The outer surface is sheathed cells PALS for mounting additional pouches At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? Forum discussion YOU MAY BE INTERESTED IN:
The boot is made with three-component casting of durable TPE, on the sole are metal spikes that prevent slipping Textile upper Shoe covers made of Oxford fabric with PU water-repellent impregnation Overshoes insulated liner four-layer of natural wool Modular design allows the insert to quickly dry Shoe covers Average height: 35 cm Average weight: 700 g (polypara) Dimensions: 41-48
Winter Shoe with Thinsulate insulation® for mountaineering, difficult climbs. Fits over shoes. Do not interfere with the fastenings of cats. Features high, completely hiding the lower leg technological hole for fastening of clips of "cats" front and rear webbing in heel area for added rigidity and ease of use durable zipper along the entire length of doubled strap top adjustable elastic cord with lock Material: PolyOxford 600 Inner fabric: Oxford 210 Gain: Cordura Insulation: Thinsulate The size of the soles on the patterns: S - 29.5cm M - 31.5cm L - 33.5cm XL -35.5cm  
Downy winter jumpsuit for men for extreme conditions of high-altitude climbing and polar expeditions. With low weight and transportation volume, thanks to technology warm "closed" seams coverall can protect from frost up to -35 °C. Features minimum weight anatomical fit reinforced elbow and knee zones technology warm "closed" joints large warm hood with the tube, adjustable elastic cord with stoppers and locking flap with Velcro® zipper insulated internal straps, doubled with the upper flaps on the Velcro®fastener elastic adjustable straps inside jumpsuit cuff insulated fabric Polartec® volume cuffs adjustable flaps with Velcro® on the sleeves of the ring for fastening gloves two large external patch pockets closed by flaps with Velcro® warm lapel zipper pocket two inside pockets with zip a single lightning (with six locks) along the length of the trousers at the rear allows you to adjust the vents and remove the back valve Central zipper with two locks can be undone at the top and bottom snow clutches at the bottom of the pants is adjustable with elastic band and Velcro®fastener the area of the knees and the lower part of the trousers is reinforced with a durable fabric   Features Top fabric: Advance® Perfomance Inner fabric: Advance® Classic Weight, g: 1700 Anatomical fit elbow and knee areas. Pockets: 5 Type of seam: closed Water resistance, mm. water column: 3000 The presence of the membrane. Type of zipper: solid Hood: not detachable Moisture barrier properties. Tissue gain: Oxford 600 Insulation: white goose down Type of insulation: natural The weight of insulation, G.: 630 Temperature, C°: -35 Fill Power index (down articles): 800 The increased contact areas. Adjusting the belt. Detachable rear roof. Inner cuffs. Adjustable vents. Adjustable cuffs of the sleeves: Velcro on cuffs Snow clutches.    
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: 135 g/m2
Waistband too high to protect the lower back from the cold The loops wide waist belt Slits with zipper on each side for easy donning shoes Elastic band at the bottom of the pants does not allow them to creep up Four pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size Warm, durable, windproof and water-repellent due to the used in their manufacture Oxford fabric (100% nylon with coating), trousers combined with jackets "Delta" or M4, but other options are possible. In these pants the cold, snow and wind are not afraid of you. Insulation – synthetic fiber polyester wadding (150 g/m2) does not absorb moisture and is not afraid to frequent washings. In contrast to the expensive membrane fabrics and down insulation, these materials do not require complex care. Service, work or leisure in the fresh air will be much nicer, if you are ready for the bad weather.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Weight: 800 g Size (In×W×D): 32×32×56 cm Material: 600D Oxford Polyester TPU Accessories: Duraflex® Waterproof, wear-resistant large volume travel Easy spinning top forms a wide opening aperture for easy and quick access to things lying in your bag Shoulder strap and handles facilitate carrying bags Bag manufactured by "weld" technology. All seams are sealed
Volume: 35 l Weight: 1070 g Dimensions (W×T×B): 29×19×46 cm Material: 600D Oxford Polyester TPU Accessories: Duraflex Small waterproof tactical backpack This backpack is made by "welded" technology. All seams are sealed Spill-resistant zipper provides quick and easy access to the main volume On the front two pockets and on the sides there are MOLLE platform for attaching extra pouches Removable belt sling Attention! Waterproof zipper is not 100% protection from moisture penetration
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and 1 under the radio 2 bottom pockets and 1 inside pocket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated - CLOSEOUT Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons, prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and one pocket under the radio 2 bottom pockets and one internal Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Gaiters for mountaineering fabric Gelanots®. Bottom waterproof portion made of Cordura 1000 with forming substrate PolyOxford 420. Features completely enclose the lower leg comfortable cut the upper part of "breathable" fabric the top is adjustable elastic band with a locking mechanism wide top latch does not violate the circulation contact areas are reinforced with plates of Teza accelerated mount the Shoe to a steel cable and hook the lack of zipper makes it easier to adjust the Shoe the bottom edge is built on a wide elastic band tight to the Shoe and prevents the ingress of snow   Material: Gelanots® Gain: Cordura 1000, 420 PolyOxford  
Volume: 15 l Weight: 600 g Dimensions (W×T×B): 30×12×42 cm Material: Nylon 420D TPU Accessories: Duraflex Small waterproof backpack This backpack is made by "welded" technology. All seams are sealed Spill-resistant zipper provides quick and easy access to the main volume Lay two side pockets External zipper pocket with organization inside a simple Attention! Waterproof zipper is not 100% protection from moisture penetration
Volume: 40 l Weight: 1070 g Dimensions (W×T×B): 30×25×65 cm Material: Nylon 420D TPU Accessories: Duraflex Light small, completely sealed, backpack This backpack is made by "welded" technology. All seams are sealed The entrance to the main volume is closed by a twist, as classic dresses, which ensures complete tightness of the backpack Molded back provides great ventilation while carrying the backpack and practically does not absorb moisture due to the lack of elements from the foam The backpack can be easily used as external germophobe during the rafting The backpack has an air valve to bleed excess air
Gaiters for mountaineering made of a membrane fabric. Bottom waterproof portion made of Cordura 1000 with forming substrate PolyOxford 420. Features completely enclose the lower leg comfortable cut the upper part of "breathable" fabric the top is adjustable with strap and secured with Velcro® wide top latch does not violate the circulation mount the Shoe to a steel cable the lack of zipper makes it easier to adjust the Shoe   Material: Nylon Inner fabric: PolyOxford 420 Gain: Cordura® 1000  
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Volume: 20 l Weight: 1200 g Size (In×W×T): 28×18×38 cm Material: Nylon 420D TPU Accessories: Duraflex® A fully sealed bike mounts on the trunk Easy twisted top gives the necessary tightness and provides quick and easy access to the things that lie in the bag Removable strap for wearing over the shoulder Internal pockets for small items
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 17×13,5×4,5 cm Weight: 230 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Medium pouch organizer for easy placement of small things Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Use cases: the pouch on the sides and the front side of the backpacks and satchels, pouch for unloading vests, bibs and CPF, bag on hip belt, separate bag-a man purse (the strap not included) On the front surface of a pocket with horizontal zip and cell PALS/MOLLE for attachment of additional pouches Main compartment with large (type 10) two-way zipper, unbuttoned to the bottom, the opening angle is adjustable removable from the cord and release Duraflex®. The zipper is sewn with double stitching, instead of the metal reeds are used loops of paracord (silent, impossible to break) At the bottom of the elastic pouch cell for mounting objects, is hidden under a grommet for drainage water Inside on the front wall fold-up flat pocket with vertical zipper and two-layer elastic system of cells of different widths (items are laid out horizontally) Inside on the back wall there is a large open flat pocket, a double layered elastic cells of different width (items arranged vertically, narrow cells are ideal for pens and markers), near the bottom is a small open pocket (in it it is possible to set the vertical pieces) and a few elastic cells for horizontal subjects. Also in the upper part of stitched webbing with plastic hook-carabiner for hanging small things (keys, etcD.) To the top of the rear wall sewn carry handle and two plastic rings Duraflex® attachment straps (not included) to be worn as a handbag-borsetki All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and 1 under the radio 2 bottom pockets and 1 inside pocket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated - CLOSEOUT Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Hypalon ORCA® (Belgium) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size: 22,5×32 cm (size of platform) Weight: 320 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerHard thigh platform, trimmed with PALS straps for attaching pouches and holsters, clips on to Trouser/unloading/pistol belts or slings positioned above PALS The platform has a trapezoid shape PALS webbing sewn on Cordura® 500d entirely to each other without gaps, from top to 3 horizontal rows of four cells in width, the lower 5 rows of 6 cells in width In the Central part of the platform is sewn a piece of hard plastic to maintain the shape. In the lower half of the platform under the plastic is a soft foam for comfort The lining is made of Oxford cloth 210d The hip belt 50 mm tight gum. Fastens with Duraflex®, adjustable girth additionally fixed double-slit buckles Part of the femoral belt, passing under the platform covered with heavy-duty material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to protect against slippage heavily loaded platform around the leg when you move The hip belt removable, adjustable right/left foot (fastex should look forward). For this purpose the belt need to thread under the two vertical loops of webbing on the underside of the platform, fasten the two Velcro strips on the side edges of the wrong side of the platform, then similar to fasten the Velcro on the front side of the platform Fastening to the belt from a vertical 50 mm webbing with fastex for quick release. Adjusting the height of the platform relative to the belt is performed by the fastex and Velcro sewn to the end of the line and on the underside of the platform The fastex belt fastening from top 25 mm two sewn belt loops with Velcro closure and metal button. The belt loops can be attached to the belt width up to 80 mm and in width to two cells in PALS (loops plays the role of the clip, is passed in a separate cell) and one or two in the height of the horizontal rows of the sling PALS
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 113 g Size (In×W×T): 17,5×14×6.5 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carry case Patriotic army of 800 ml flasks, on the button Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Valve with a hole in the center for the lid of the jar, completely covering the top (except the cover). Fastens with a button that is hidden under the surface of the valve to protect against pullout and flare with the abrasion of the coating. Handy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 17×23×4.5 cm Weight: 350 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Large pouch-an organizer for convenient placement of small details. Thanks to its removable transparent cover for maps can be used as a tablet Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to three horizontal rows of cells in height Use cases: the pouch on the front of the backpacks and satchels, commander's panel/tablet/admin pouch on the front of the bibs and vests, separately bag/mini-briefcase or miniature bib (strap not included) On the front surface of a pocket with horizontal zip and cell PALS/MOLLE for attachment of additional pouches Main compartment with large (type 10) two-way zipper, unbuttoned to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. Zipper sewn double stitching, instead of the metal reeds are used loops of paracord (silent, impossible to break) To the bottom of the inside pouch fastened by Velcro case for cards from transparencies. The case expands in height, and accommodates a sheet size 21×28 cm (A4 paper is 21×29.5 cm). It is particularly convenient to use the card for hanging the organizer on your chest Inside on the front wall of the hinged two big zippered pockets made of durable mesh. They are convenient for carrying small items in bulk, K. the contents visible and protected from loss Inside on the back wall there is a large flat zip pocket (ideal for documents), two open flat pockets and double layer elastic system of cells of different width, allowing to place the various items and tools (pens, markers, flashlights, folding knives, multitools and so onp.) for easy removal. Also in the upper part tabbed ring of webbing and plastic hook-carabiner for hanging small things (keys, etcD.) To the top of the rear wall sewn carry handle and two plastic rings Duraflex® attachment straps (not included) to be worn as a handbag All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating Insulation: The batting 150 g/m2 No vagaries of the weather will not force a child to stay home, but it is not required if there is the right clothing. The bib design eliminates the wind or snow inside. It can climb snow banks, sledding or snow saucer down an ice and snow-scooter or snowmobile. The already wear-resistant Oxford fabric (100% nylon with coating), with the intended hard use, is reinforced pads on the knees. Used as insulation sintepon – warm, inexpensive synthetic filler that does not absorb moisture, dries quickly when wet and returns to initial volume after washing. Thanks to the use of fabrics, sophisticated design and high quality manufacturing, bib solid, not blown, not afraid of snow and moisture. Front zipper closing, top and bottom, which is very convenient in a certain situation. The belt is adjustable in size rubber band, but also has belt loops for wide belt. This gives the pants a special, favorite boys style and block the path of the wind and snow. Besides little tourists and hunters can hang on a belt or other necessary items. Bottom side zipper easy to wear bulky winter boots, and the belt loops will not allow the pants to ride up in the snow. Straps are adjustable to fit for growth. Add to this a loose fit and a large amount of volume pockets, and you will realize that the best clothing for walking to be found, and the school is easy to remove and leave with the jacket in the locker room.
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing Used stainless button May be upgraded with a jacket hood, collar and liner Pockets: 2 chest, 2 downstairs and 1 internal Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
The material of the case: Oxford (Oxford) - 100% nylon with coating Size: 34×24×1.8 cm Weight: 242 g The outer layer of the fabric increases durability and longevity of the seat
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Waistband too high to protect the lower back from the cold The loops wide waist belt Slits with zipper on each side for easy donning shoes Elastic band at the bottom of the pants does not allow them to creep up Two pockets Material: Oxford (Oxford) - 100% nylon with coating Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Adjustable straps to adjust for growth Front zipper with two locks, unbuttoned both the top and bottom Optional locking front zipper from self-opening The loops wide waist belt Adjustable waist size with elastic Reinforcing pads on the knees Pleats in the knee area to provide additional freedom of movement The loops at the bottom of the pants do not allow them to creep up Slits with zipper on each side for easy donning shoes Pockets: 2 side pockets 2 front pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size Warm bib will not leave the slightest loophole cold, especially if it is included with jackets "Delta" or "M4". Made of durable, windproof and water-repellent Oxford fabric (100% nylon with coating) it will become your reliable protection in the service, work or rest. In the overalls with the cold, snow and wind are not afraid of you. Insulation – synthetic fiber polyester wadding (150 g/m2) does not absorb moisture and is not afraid to frequent washings. In contrast to the expensive membrane fabrics and down insulation, these materials do not require complex care.
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons, prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and one pocket under the radio 2 bottom pockets and one internal Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 113 g Size (In×W×T): 17,5×14×6.5 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carry case Patriotic army of 800 ml flasks, on the button Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Valve with a hole in the center for the lid of the jar, completely covering the top (except the cover). Fastens with a button that is hidden under the surface of the valve to protect against pullout and flare with the abrasion of the coating. Handy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Weight: 400 g Size (W×T×In): 26×4×35 cm The molded pocket size (W×T): 29×3 cm Material: 600D Oxford Polyester TPU Accessories: Duraflex® Compact waterproof with functional interior organisation for carrying my netbook and business papers Bag manufactured by "weld" technology. All seams are sealed The main volume closes with a waterproof zipper Insert foam give rigidity and protects your tablet from damage Molded internal pocket for netbook lined with a soft Jersey External mortise pocket for small items Removable strap for wearing over the shoulder Attention! Waterproof zipper is not 100% protection from moisture penetration REVIEWS: The review on the website "Russel"
Insulated suit "Forester" developed by "PRIVAL" especially for fans of hunting and outdoor activities in the cold season. Warm suit consisting of long triggers, and overalls sewn from waterproof fabric, protects the user from wind, rain and low temperatures. Features costume costume "Forester": The suit is sewn from waterproof fabric.   Jacket detachable hood is adjustable in volume.  The collar and hood of the jacket have the added fleece insulation In the sleeves of the jacket enclosing the inner knitted cuff The waist of the jacket is adjustable with an elastic cord with clamps Overalls used in the two-way zipper. The straps of the overalls are adjustable in the height, the bottom of Trouser legs adjustable in width 7 convenient pockets on the suit, both external and internal, will allow you to place all necessary. Soft fabric lining provides internal comfort.   Features: Composition: jacket / bib Color: Forest the CMB Top fabric: Oxford Backing cloth: Taffeta Insulation: Fiber
Winter Shoe with Thinsulate insulation® for mountaineering, difficult climbs. Fits over shoes. Do not interfere with the fastenings of cats. Features high, completely hiding the lower leg technological hole for fastening of clips of "cats" front and rear webbing in heel area for added rigidity and ease of use durable zipper along the entire length of doubled strap top adjustable elastic cord with lock Material: PolyOxford 600 Inner fabric: Oxford 210 Gain: Cordura Insulation: Thinsulate The size of the soles on the patterns: S - 29.5cm M - 31.5cm L - 33.5cm XL -35.5cm  
Multifunctional light and compact backpack "Kuzmich-45" CMB (Prival) with a maximum capacity of 55 l intended for tourists, hunters and fishermen. Comfortable molded backrest makes it a comfortable wear, and the compactness and relative simplicity provides a good mobility. The cloth material of the backpack does not absorb moisture, so you can not be afraid that the Luggage will get wet. On the sides "Kuzmich-45" the CMB is equipped with two large outer pockets with lockable zippers dochazkove, providing quick and convenient access to frequently used items. The backpack has a convenient large carrying handle and a floating top pocket flap for small items (also with dochazkove lightning).Features: Purpose: for hunting and fishing Execution: anatomical Type: unisex Straps: 2 PCs Weight: 800 gr Height from 25 cm to 50 cm Width 30 cm Thickness 25 cm Volume : 45 liters Capacity:  up to 30 kg Fabric: Poly Oxford 600D PU RipStop Fabric of bottom: black PU Poly Oxford 600 Color: camo digital, camo forest Options: Side pockets Side screed The upper valve Top pocket: there Key features Type: unisex for hunting and fishing Suspension system: soft frame Volume: 45 l Side screed: there Weight: 0.75 kg Dimensions (Wksht): 50х25х20 cm Functionality The top flap: there, with a pocket Pockets: side pockets Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. hand enters from the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 285 g Size: 24×23,5×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerLarge utility pouch with zipper with internal organization, square shape. The numbers in the name (6×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a sugar on the back and unloading systems as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size: 17,5×6,5×3.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for flashlights with a height of 13-15 cm and a diameter of the handle up to 3.5 cm and other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and from two to three horizontal rows of cells in height The rear wall of the pouch is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and the lining is made of light fabric Oxford 210d. The front wall - Cordura® 500d, rigid webbing and the lining is 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
A layer of insulated batting To protect from the wind has otvorachivayutsya headphones, which are fixed by buttons To ensure hygiene, lining cotton fabric Material: Oxford (Oxford) - 100% nylon with coating
A layer of insulated batting To protect from frost headphones turn away Headphones are made of grey faux fur To ensure hygiene, lining cotton fabric
Waistband too high to protect the lower back from the cold The loops wide waist belt Slits with zipper on each side for easy donning shoes Elastic band at the bottom of the pants does not allow them to creep up Two pockets Material: Oxford (Oxford) - 100% nylon with coating Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) External size: 14,5×Of 7.5×7 cm Internal size: 14×7×6.5 cm The size of the outer pockets: 7×6.5 cm Weight: 99 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUniversal pouch/for the camera, Velcro, with soft lining to protect the contents Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch is ideal for storing the camera the appropriate dimensions, but it can be used as a universal Luggage Due to the special shape of the valve and tube (is dragged paracord with retainer Duraflex®) the contents of the pouch protected from ingress of water and dirt The main compartment of the pouch protects the contents from shock, being a sandwich of fabric Cordura® 500d, semi-rigid foam layer and lightweight Oxford cloth 210d lining Outside to the side there is a small flat pocket with Velcro closure for storing small items (e.g. memory cards) REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Compression stuff sack for transportation of down products and packaging, apparel, equipment. Features four-sided fastening reliable hardware that withstands high loads and long convenient loops on the ends of the sling to laces   Material production: PolyОxford Weight, g: 180 Dimensions: 25,5х58,5  
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Free, not hampering the cut You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper; the bottom and cuffs, adjustable in size with additional buttons prevent the penetration of the cold under clothing Used stainless button Pockets: 2 chest pockets and 1 under the radio 2 bottom pockets and 1 inside pocket Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated - CLOSEOUT Insulation: Polyester 300 g/m2 YOU MAY BE INTERESTED IN: Warm, durable, windproof and waterproof, good for duty, and for recreation. Due to the loose fit it does not restrict movement and warms easily and burdensome, especially when combined with insulated pants or overalls. However, if you need more protection, you can always buy the "accessories" section or (and) fur collar. Their properties jacket required used in its manufacture Oxford fabric (100% nylon with coating) Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size: 14×6×3.5 cm Weight: 41 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for larger gas cartridges, or other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE need one cell wide and two horizontal rows of cells in height The rear wall of the pouch is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and the lining is made of light fabric Oxford 210d. The front wall - Cordura® 500d, rigid webbing and the lining is 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
A layer of insulated batting To protect from the wind has otvorachivayutsya headphones, which are fixed by buttons To ensure hygiene, lining cotton fabric Material: Oxford (Oxford) - 100% nylon with coating
Multifunction backpack "SCOUT 25-Oxf CMB-number" (Prival) is intended for tourists, hunters, fishermen. Comfortable, soft, molded backrest makes it a comfortable wear. The backpack has one large roomy compartment with two tie rods, two outer pockets, an inner pocket for small items in the upper valve. All straps on the backpack is made of genuine leather. Features Purpose: For hunting and fishing Execution: Anatomical Chest coupler: there Waist belt: there Valve: there; with a pocket for small items Straps: 2 PCs Type: unisex Weight: 680 gr Volume: 25 liters Load capacity : up to 15 kg Fabric: 600D Oxford Fabric of bottom: Cordura Color: the CMB figure Key features Type: unisex for hunting and fishing Suspension system: anatomical, chest coupler, zone belt Volume: 25 l Side screed: no Weight: 0.68 kg Functionality The top flap: there Pockets: side pockets Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size: 17,5×6,5×3.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for flashlights with a height of 13-15 cm and a diameter of the handle up to 3.5 cm and other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and from two to three horizontal rows of cells in height The rear wall of the pouch is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and the lining is made of light fabric Oxford 210d. The front wall - Cordura® 500d, rigid webbing and the lining is 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 200 g Size: 14,5×23,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch zipper internal structure horizontally oriented. The numbers in the name (6×2) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch perfect organizer for unloading systems, a simple belt from a small sling backpacks, as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells in width and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall a large flat zipper pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 200 g Size: 14,5×23,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch zipper internal structure horizontally oriented. The numbers in the name (6×2) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch perfect organizer for unloading systems, a simple belt from a small sling backpacks, as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells in width and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall a large flat zipper pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Versatile and technically advanced travel backpack "Route 65 Red" (Prival) is designed to carry small amounts of freight with ease. External backpack suspension allows you to fix on the facade of the extra gear and equipment. The possibility to attach snowboard or ski. Backpack "Route" can be used as Assault. The backpack has one compartment. Pocket on the flap. Inner pocket for documents or other flat gear. Upholstered back, adjustable waist belt and adjustable shoulder straps make the backpack very comfortable when carrying equipment and gear, frameless backrest significantly reduces the weight of the product and reduces the volume in the folded state. Features: Purpose: Multi-day tours, sport tourism Execution: Anatomical Type: unisex Straps: 2 PCs Weight:  gr Height cm Width cm Thickness cm Volume: 65 liters Capacity:  up to 15 kg Fabric: Poly Oxford 600D PU Fabric of bottom: black PU Poly Oxford 600 Color: red. Key features Type: unisex trekking Suspension system: soft framework, chest coupler, zone belt Volume: 65 litre, maximum load 15 kg Side screed: there Color: red, gray Functionality The top flap: there, with a pocket Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Size (In×W×T): 15×6,5×2.5 cm Weight: 44 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple pouch with Velcro closure for small items flat type medium folding knives. Increased analog universal pouch S Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height The whole is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and content protection, and lining fabric 210d Oxford The valve and the bottom are rounded shape, making it comfortable to wear on the Trouser belt in everyday life Velcro fastener All the tissue sections and lines edged for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Oxford
Oxford Oxford cloth is an innovative material with a fairly wide scope. A distinctive weave and excellent performance. Indispensable in the production of sports and children s clothing, travel gear and even furniture industry. At the moment there are a huge number of very different tissues, which are distributed under the brand name Oxford . They should not be confused with the classic cloth of this type. The Oxford material is of synthetic origin. Different special weaving called Gunny another name Panama weave , when weaving a fiber cloth is obtained which consists of embossed squares in a checkerboard pattern. It is usually processed or polyvinylchloride polyurethane coating that provides water resistance of the finished product. Most often the Oxford is made on the basis of polyester or nylon, that is, in any case this is a non-natural fabric synthetic , but it has a number of advantages that allow you to sew from her mostly male things, and travel clothing and equipment. Classic Oxford cloth eng. oxford traditionally used for sewing men s shirts dress shirts . Oxford cloth Oxford is divided into several types depending on the thickness of the thread underlying the cloth 210den, 240den, 300den, 420den, 600den. For the manufacture of covers-awnings for cars, motorcycles, scooters, ATVs, snowmobiles, watercraft, used tissue 240-300den Parking with storage. For transporting equipment ATV, snowmobiles, watercraft used a denser polyester 600den, to avoid tearing of the cover during transportation. In addition to strength, Oxford can boast of characteristics such as resistance to chemicals and reagents, durability, wear resistance, impermeability. If the material is made on the basis of polyester, here you can add heat resistance and lightfastness. Oxford cloth Oxford is used in the manufacture of awnings, tents, canopies, backpacks, shoes, bags, clothes. The positive characteristics of the material water-resistant and water-repellent properties wear resistance gryazeustoychivy thermostability the material is able to retain its properties at temperature range from 50 frost to 110 heat resistance high strength increased resistance to abrasion of the filaments affordable price the ease of care. Structure This fabric has a type of wickerwork matting eng. Basketweave basket weave netting , also known as Panama weave . Density The density of Oxford is due to the thickness of the yarn, which is denoted by den deiner . The larger d, the thicker the thread used in the production, the more pronounced the structure of Oxford. We offer varieties of Oxford 210den, 240den, 300den, 420den, 600den. Treatment PU polyurethane - inner colorless coating that provides water-resistant and windproof fabric properties. Resistant to organic solvents. The water proof nad fabric with PU coating ranges from 200 to 5000 mm of water column. Test results Breaking load for different types of Oxford 80-160 kgf at a rate of not less than 50 kgf in the warp, 45-120 kg at a rate of not less than 30 kgf by a duck. The water proof nad for different PU coating 450mm 800mm 1000mm 3000mm water column. Frost - the Oxford PU -160 C . Varieties The fabric is produced of several types in dependence on the thread thickness. The density of the material due to the thickness of thread used in the composition of the fabric and is measured in DEN denoted D . Usually this number can be from 150 to 1600. The higher the number, the thicker the thread and denser, rougher fabric. Now there are the following markings 210 D, 240 D, 300 D, 400 D, 600 D. As is clear, 210 D the thinnest, with her sewing mostly clothing, sports and tourism. Thicker types make shoes, car seat covers and other products. As for the color scheme, Oxford, unfortunately, can not boast a wide range of colors. This is due, first of all, the scope of application of the material. The most common colors khaki, green, grey and black. There are also blue, orange, white, yellow and red. From the density directly depends on the material Oxford 210den 170 g m , 420den 180 g m used for the production of top and overalls, the clothes and equipment for hunters and fishermen, awnings, tents. Successfully used for sewing awning for car, case for motorcycle, scooter and any other equipment. Oxford 600den PU 300 g m bags, backpacks, bags, and covers for snowmobiles, ATVs, jet skis for transportation. Treatment PU polyurethane - inner colorless coating that provides water-resistant and windproof fabric properties. Resistant to organic solvents. The water proof nad fabric with PU coating ranges from 200 to 5000 mm of water column. Test results Breaking load for different types of Oxford 80-160 kgf at a rate of not less than 50 kgf in the warp, 45-120 kg at a rate of not less than 30 kgf by a duck. The water proof
 
Ask a question
Sale