Products from woodland category

275 products, 27 reviews, 41 video
Compare (0)
Sorting:
Number:
Height
Size
Бренд
Color
The type of camouflage
Type headdress
Type of equipment
System
Material
The type of clothing
The backpack
Type of a sleeping bag
Type of tent
Office
Shoes style
Backpack style
The type of Mat
The type of bag
The number of seats in the tent
Sex
Time of year
Appointment
Jacket type
Type of clothing
Защитные свойства
Утеплитель/подкладка
Метод крепления подошвы
Цена
Seasonality: 3 Number of places: 1 Dimensions and weight: The dimensions of the outer tent, tent (L×W×In): 235×140×100 cm The sleeper dimensions (L×W×In): 235×80/50×100/60 cm Dimensions Packed (L×W×In): 42×14×14 cm Total weight: 1,10 kg Materials: Outer tent: Polyester 75D/190T PU 3000 mm Bottom: 100D Polyester PU 5000 mm Accessories: YKK Versatile, lightweight single layer tent with a separate vestibule As stands, you can use a normal rack purchased separately, trekking sticks or improvised material Additional loops on the ridge allow you to install the tent without struts with the help of external supports. For example, between two trees Not only has a spacious sleeping area for one person, but also quite spacious, fully close the vestibule for things All seams taped An air vent on the end ramp and a large ventilation window with mosquito net in the sleeping Department create a good flow-through ventilation Detachable garter straps on the bag makes it easy to fix under a backpack without additional fastening elements. In this case, the tent out from the bag, separating the bag from backpack (prerequisite: the rucksack must have straps on the bottom for external mounting) Rope guy wires are interwoven reflective thread Racks and pegs not included REVIEWS: Review and discussion of tents on the forum YOU MAY BE INTERESTED IN: General characteristics Purpose: tracking Inner tent: no Number of places: 1 Type of frame: internal Geometry: custom Design The number of inputs / rooms: 1 / 1 Number of vestibules: 1 Ventilation Windows: there Windows: no Interior pockets: no Canopy: no Protection The water resistance of an awning/bottom: 3000 / 5000 mm V.article Sealing joints: taped Wind/snow skirt: no Mosquito net: there UV protection: there Materials The material of an awning: polyester (Taffeta 190T 75D PU) The material of the bottom: polyester (100D 190T Taffeta PU) The material of arches: steel Diameter of arcs: 16 mm Dimensions and weight Dimensions outer tent (LxWxH): 240x140x120 cm Weight: 1.8 kg Additional information: delays have interwoven reflective thread, as stands you can use trekking poles or improvised material, color: khaki, camouflage
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerClassic bib with pockets sewn under machine gunners Adjustable in size from 46 to 68, whatever the growth Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings Simple X-shaped webbing from a wide sling, crossed behind the. Sewn on front, back at sides fastened 50 mm testexam Duraflex®. The extra ends of the sling collapsed hiding under the ring from the gum The wide belt slings, fastens with 50 mm fastex Duraflex®. The extra end of lines in collapsed view hides under the ring out of the gum. Can accommodate additional equipment (for example, by dumping stores) On the underside of the sewn loops for releasably attaching the unloading/pistol belt 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme pockets sewn to the bib so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets under the VOG-25/VOG-25P, each with a capacity for 2 shots. The individual shots are held inside in the stretch cells. You can use the pocket for other items (e.g., hand grenades or things) 2 pockets under the VOG-25/VOG-25P, each holds 1 shot 2 pockets for bayonet-knife, or 1 of the CPR. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. 3 pockets for hand grenades (2 sewn on the sides, 1 on the left shoulder strap front). Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 large pocket for flat items (map, scarf, etcp.) with the entrance at the top Total saturation: 1) 8 stores the AKM/AK-74 or 4 RPK/RPK-74 2) 10 VOG-25/VOG-25P 3) 1-bayonet 4) 3 or 4 (without the bayonet) RSP 5) 3 hand grenades REVIEWS: Custom modification from Vladislav Boychuk (tankist_sssr) Review from DragunBreath on www.youtube.com (ENG)
Material: Size: 190×90 cm 65% polyester 35% cotton
Product weight (jacket): 52-54/170-176 R-R – 920 g Product weight (pants): 52-54/170-176 R-R – 630 g
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 143 g Size (In×W×T): 17×19×12.5 cm Pouch for Russian army bowler. Also fits the Swedish army pot (SHAQ). Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt On the front wall sewn two horizontal density volume tehsilimi buckles Duraflex® All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Size: 11×7×2.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Field uniform of the U.S. armed forces. The jacket consists of two parts: top and the liner that can be worn separately Jacket: You can use fanspage Storm hood, adjustable oval face that retracts into the collar Metal zipper Pleats at back and sleeves add extra freedom of movement Windproof flap covering the front zipper that prevents cold under clothing The cuffs on the sleeves for additional protection of the hands from the wind Pockets: 2 pockets on the chest and 2 at the bottom of the jacket Laces: cord for tightening the waist and bottom jacket Undercoat: Collarless The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Stretch tricot n/W gum on the cuffs for comfort Attaches to jacket with buttons 2 bottom pockets The material of products: Nylon/Cotton 50%/50% Insulation: Polyester wadding of 160 g/m2 Product weight: 46/176 R-R – 1401 g 50/176 R-R – 1558 g 54/182 R-R – 1611 g 58/188 R-R – 1810 Jacket, designed in accordance with the requirements of military field gear functional and concise. The combination of windbreaks with a warm liner significantly extends the range of temperatures and weather conditions that may be used. The upper is made of mixed fabric (Nylon 50%, Cotton 50%), which has the strength, durability and windproof properties inherent in synthetic fabrics, breathable properties of cotton, not "rustling". The liner of insulation – a synthetic fibre polyester (160 g/m2), which, unlike the fluff does not absorb moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care.
Volume: 35 l (including side pockets and valve) Weight: 1.25 kg Main compartment (W××T): 31×55×18 cm Side pocket (2 PCs) (W××T): 16×27×6.5 cm Pocket flap (W××T): 22×15×6.5 cm Main fabric: 600D Polyester Accessories: Duraflex Classic three-day backpack Non-removable shoulder straps with anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell for attachment of pouches Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation All exterior area covered backpack MOLLE straps Removable wide belt slings Side pockets with zip fastening volume lacing Fixed valve, volumetric external zippered compartment, an additional flat zipper pocket for documents on the inside of the valve The point of attachment of the cargo on the flap with removable ties Additional fixing points of the cargo at the bottom
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Size: 18,5×6,5×16 cm Weight: 102 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUnder the pouch binoculars B7×30 "Second" or the PGO-7V (grenade launcher optical sight) with Velcro. Can be used as Luggage. Production is halted Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Cover complex shapes, protects contents against moisture and dirt Velcro fastener, comfortable skill of slings The external surface is sheathed PALS straps for attachment of additional pouches At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 22,5×6×3 cm Weight: 67 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RSP (reactive signal cartridges), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt For easy fixing of the CPR pouch sewn inside the two cells of elastic tape Top and bottom reinforced lining of thick webbing to maintain shape of pouch At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Weight: 186 g Material: Cordura®1060d (100% nylon) Oxford 210d (100% nylon) Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. Discontinued, replaced by the under the gas mask Pouch/Luggage Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height Pouch latest generation fastens with a buckle "AAT", the ability to adjust. The old generation used a clasp with two buttons At the top of the valve from the inside sewn a small, flat pocket of fabric 210d Oxford with Velcro for kit anti-fog films for the lenses of a gas mask The pouch can be used as Luggage The outer surface is sheathed cells PALS/MOLLE for attachment of additional pouches The top of the rear metal loop for hanging on the strap CPF At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 5×1,5×20 cm Weight: 40 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 6,5×13×4 cm Weight: 66 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerProduction is halted REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 15×3×8.5 cm Weight: 52 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: A 6.5×4×16.5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Jacket from the summer field suit of the U.S. armed forces old versions Worn worn outside Free, not hampering the cut The jacket is fitted All the buckles buttons Cuffs with adjustable Kick patches on the elbows They are delivered with sew independently and fanspage buttons All major joints – lapped with chain stitch Loaded areas of enhanced tack-zigzag Pockets: 4 patch pockets on the torso in the valve base of the left breast pocket has a slot and a narrow inner pocket for pens Material: Strong rip-stop, 53% cotton, 47% polyester Product weight: 46/176 R-R – 642 g 50/176 R-R – 687 g 54/182 R-R – 754 g 58/188 R-R – 815 g YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Size: 8,5×3,5×20 cm Weight: 83 g Pouch for 2 RAD (reactive lighting rounds), Velcro. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height For easy fixing the RAD inside the pouch sewn two cells of elastic tape At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com
Size: 21×8,5×3.5 cm Weight: 89 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 RAD (reactive lighting rounds), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt For easy fixing the RAD inside the pouch sewn two cells of elastic tape At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Length: 4.5 m Width: 5 cm Weight: 40 g Masking equipment (does not leave adhesive residue)
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 140 g Size: 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Replaces Pouch for 2 MAG. AK Velcro adjustable, having a number of improvements. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much stronger than ordinary wide elastic bands, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely hold one or two stores In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted vertically) The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance All of the Velcro is sewn in two passes around the perimeter or optionally diagonally for a secure At the bottom there is a grommet for drainage water
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) zip up pouch in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
LIGHTWEIGHT SHOES WITH HIGH BERTSAMI Top combo: natural chrome leather (1.4 – 1.6 mm) + high strength fabric textured nylon yarn 1000D Lining: nonwoven abrasion resistant and quickly drying(high-density 150g/m.square). Sole: TEP (±40°C), BUTEK 4. Method of attaching soles: adhesive. Arch support: metal Toe and heel: from reinforced thermoplastic material. Dimensions: 38-47. Deaf valve protects the foot from impact the environment(dust, dirt). Speed lacing. Padded collar. Color combo: black + camouflage. Weight: 540 gr.
Size: 16×7×2.5 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 20-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 26,5×7×6 cm Weight: 133 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two shops PKK Velcro and buckle "AAT". Discontinued, replaced with magazine Pouch for 2 MAG. V PKK.3 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two RPK or RPK-74 At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
LIGHTWEIGHT SHOES WITH HIGH BERTSAMI Top combo: natural chrome leather (thickness 1.4 – 1.6 mm) + high strength fabric textured nylon yarn 1000D camouflage. Lining: natural resistant to abrasion and fast drying (high-density 150g/m.square). Sole: TEP (±40°C), 2050. Method of attaching soles: glue stitching Arch support: metal Toe and heel: from reinforced thermoplastic material. Dimensions: 40-47. Deaf valve protects the foot from impact the environment (dust, dirt).   Speed lacing. Color combo: black + camouflage. Weight: 665 gr.
The classic model, straight cut Material: 100% Cotton Product weight: 50 R-R – 166 g 54 R-R – 203 g 58 R-R – 217 g REVIEWS: Review the website "Russel" YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 91 g Size: 13×11×5 cm (including the thickness of the insert buckle) Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer1 pouch to store SVD/carbine "Tiger" on the fastex. Replaces Pouch to store the SVD (Ref.2). Compared to the old model pouch has been redesigned from scratch and is more user-friendly design Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation Suitable for 8-charging shops saiga-308 and Tigr-308 The pouch is sewn entirely of two layers of fabric Cordura® 500d Fastens with Duraflex fastex®, the parent part is installed on the front wall of the pouch. The installation location of the fastex enhanced inside the second layer of fabric. Fastex opens silently easy to handle In the front wall of the pocket between the two layers of fabric Cordura® 500d sewn a piece of plastic. It supports the shape of the pocket, facilitating the introduction and extraction of the shop From the main compartment of the pouch Peeps at least 2.5 cm in height store the SVD, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the retrieval of the store All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
The classic model, straight cut Material: 100% Cotton Product weight: 50 R-R – 166 g 54 R-R – 203 g 58 R-R – 217 g REVIEWS: Review the website "Russel" YOU MAY BE INTERESTED IN:
Trousers from the summer field suit of the U.S. armed forces old versions Free, not hampering the cut All the buckles buttons The belt is adjustable in size with side contractions (braid, threaded into metal trendeleva buckle) The loops wide waist belt Reinforcing pads on the knees and in the seat The bottom of the trousers, if necessary, shrinks sewn braid All major joints – lapped with chain stitch Loaded areas of enhanced tack-zigzag Pockets: 2 side inset pockets, 2 rear inset pockets, 2 cargo pockets large overhead flat cargo pockets, with pleats to give volume, when empty have thin, does not interfere with the profile. All the folds look back, the front edge of the valve and the pocket is sewn to the pant leg, thus moving forward pockets are protected from getting caught in the elements of vegetation Material: Strong rip-stop, 53% cotton, 47% polyester Product weight: 46/176 R-R – 498 g 50/176 R-R – 515 g 54/182 R-R – 618 g 58/188 R-R – 732 g REVIEWS: Review the website "Russel" Reviews and discussion forum YOU MAY BE INTERESTED IN:
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Material: 100% Cotton Product weight: 52 R-R – 232 g 54 R-R – 265 g
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6.5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) External size: 14,5×Of 7.5×7 cm Internal size: 14×7×6.5 cm The size of the outer pockets: 7×6.5 cm Weight: 99 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUniversal pouch/for the camera, Velcro, with soft lining to protect the contents Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch is ideal for storing the camera the appropriate dimensions, but it can be used as a universal Luggage Due to the special shape of the valve and tube (is dragged paracord with retainer Duraflex®) the contents of the pouch protected from ingress of water and dirt The main compartment of the pouch protects the contents from shock, being a sandwich of fabric Cordura® 500d, semi-rigid foam layer and lightweight Oxford cloth 210d lining Outside to the side there is a small flat pocket with Velcro closure for storing small items (e.g. memory cards) REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Material: 100% Cotton Product weight: 50/176 R-R – 690 g 54/182 R-R – 746 g 58/188 R-R – 897 g Not knowing for sure that these were artificially aged under the roof of our company, one would suspect that their former owner was bombing "Ho Chi Minh Trail". Fortunately it is not that confirms and rich colors of the presented options. As all vintage pants, "Laos" is made from totally natural cotton. Dense, breathable, wear-resistant - they are extremely comfortable and functional. The abundance of roomy, but doesn't overload your silhouette, pockets, loops wide waist belt, zipper at the bottom of the leg allowing you to wear them with high boots. All this makes it extremely attractive for everyday wear and travel.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 281 g The size of the pouch separately: 16,5×13×7 cm The size of the open platform: 40×14 cm Lightning: SBS® Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with the possibility of rapid separation of equipment (vest, RPS, bib) separately for use in an emergency and for more convenient access to content. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The product consists of two parts – the platform and pouch The platform is an oval detail of two layers of fabric, rear – mount UniClick Plus, on the front large Velcro area for attaching pouch. The top and bottom of the pouch obkladyvaetsja valves platform, sostarivaniya by Duraflex fastex® with adjustable ring and elastic for tucking the excess end of the line If you removed the pouch interfere with the valves of the platform can be attached to the center with Velcro (see the photo in the catalog) For convenient separation and transportation of the pouch on top of its rear wall sewn loop of webbing. It covers the upper valve of the platform and is at hand in the undoing of fastex The pouch fastens with a large (type 10) two-way zipper with the manners of paracord instead of the metal reeds (silently and reliably). Zipper opens to the bottom of the pouch is disclosed by 180° On the top half of the pouch is a loop of braid for hanging lantern etc. items, flat pocket with top entry and two equal horizontal bands of double-layered, the first layer – 50 mm elastic the entire width of the pouch, the second layer – 25 mm gum divided into three cells On the bottom half of the pouch is voluminous mesh pocket with zipper for small drugs in all directions. Mesh allows you to see the contents, unlike the transparent film is not dubeet in the cold. The vertical zipper, unbuttoned when opened 180° the pouch from the top down (not dropped small items) and is located under the right hand. On top of the mesh pocket sewn vertical double-layer elastic band, the first layer – 50 mm elastic band divided into two cells (1/3 and 2/3 of the height of the pouch), the second layer – 25 mm gum divided into three cells. Place of sewing elastic bands to the mesh reinforced with webbing for secure At the bottom of the pouch cell is 50 mm gum For visual recognition of the first aid kits on the front wall of a pouch stitched cross straps contrasting to the fabric color. The same color is used for slings and fastex on the platform, which together with horizontal webbing on the pouch also form a contrast cross. First aid kit in the colors Black olive used slings and fastex on the pouches in the colors olive, Woodland, Digital flora, Coyote Brown, used black webbing and fastex All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom of the pouch has a grommet for drainage water REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Material: 100% Cotton Product weight: 44-46/170-176 R-R – 259 g Clothing made of natural materials will never lose their relevance. Breathable, lightweight and hygienic, it is not tired during the day and does not cause allergies. Gladly we present you summer vintage "Ecuador"! As all our vintage press, "Ecuador" made of natural boiled artificially aged cotton. Dense, breathable, wear-resistant - they are extremely comfortable and functional. The abundance of roomy, but doesn't overload your silhouette, pockets, loops wide waist belt, articulated knees. All this makes it extremely attractive for everyday wear and travel.
The classic model Material: 100% Cotton We say summer – mean t-shirts. Lying on the heated boards of the pier, to run barefoot in the dew, hit the stack with a guitar the Summer... to each his own, but remains a necessary condition. By the undisputed advantages of lightweight, cotton t-shirts, camouflage pattern adds a touch of romance, so rare in its combination with practicality. You don't have every night to wash a t-shirt of the child in the icy water of a mountain stream, or spend the nerves, causing it to do it yourself. Additionally, undetected to get close to any animals at close distance. As long as it was not predatory
Budget version of the BDU cap. Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 Hard visor The lining is cotton calico (in addition to the models of 100% cotton rip-stop) Complements a summer dress Is made on the model of the American model "commander" To ensure hygiene, lining cotton fabric Material: For colors Digital flora, Les, Tiger, Central Europe, Woodland, 3 color. The birch: Strong rip-stop, 53% cotton, 47% polyester Colors for Woodland, Smog, City, Shadow, Forest: Gretta, 60% cotton, 40% polyester For colors, Desert, urban: Rip-stop, 100% cotton
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Material: Cordura® 500d (100% nylon) Weight: 182 g Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. It is recommended to carry the burner, JetBoil Sumo. Improved model replacing the old one. Structurally, it is a full analogue of the small Pouch on the rear fastex but with other dimensions (and higher) Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable At the top of the valve from the inside sewn small flat pocket with Velcro for kit anti-fog films for the lenses of a gas mask. On the new model Velcro sewn reinforced way, added skill of slings for easy opening The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are offset from the old position and stitched in a classical way (with an interval between the rows of wide slings). Just three rows in height (in the old version of the pouch – two). Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling Uniclick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion
Material: 94% Cotton 6% Spandex Product weight: 44 R-R – 45 g
Volume: 40 l Weight: 2.2 kg Main compartment (W××T): 36×55×21 cm Main fabric: 600D Polyester Accessories: Duraflex A three-day tactical backpack volume: 40 l Non-removable shoulder straps with anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell for attachment of pouches Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation All exterior area of the container covered slings MOLLE Removable wide belt with side braces. The belt is sewn cell for attachment of pouches Bottom pocket with retractable mesh, from which you can form a pocket-crab, designed for carrying and other items. Around the perimeter of the pocket is adjustable by an elastic cord fixed at the hooks on the sides of the front of the backpack Laces with postexam on the sides of the container External zippered pocket with additional internal compartment Has numerous interior pockets and compartments from the grid At the bottom of the pocket with Velcro for removable garmoshechka. included Lower side pockets-emphasis Compatibility with drinking system – inside there is a bladder compartment (closes with flap and Velcro), loops for hanging and two valve output tube. Drinking system not included! Two removable compression strap to the fastex inside the main compartment of the container for fixing heavy objects The point of attachment of the cargo on the bottom and two removable ties included REVIEWS: The review on the website "Russel"
The classic model You can use shoulder straps Worn worn outside The belt is adjustable by means of side elastic bands 2 pockets on the chest Material: 100% Cotton
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
The summer trousers in the military style, designed for everyday in a city The loops wide waist belt The belt is adjustable in size with side contractions in the pocket The inner part of the belt in the lumbar region for comfort with soft tricot Reinforcing pads on the knees Pleats at knees give extra freedom of movement The bottom of the trousers is adjustable in size by means of a cord 6 pockets Material: 53% Cotton 47% Polyester Product weight: 46/176 R-R – 669 g 50/176 R-R – 709 g 54/182 R-R – 688 g 56-58/188 R-R – 777 g SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size Doesn't matter how old you are and what caused your love of military style. Originally caused by General poverty, ruin, or imitate the leaders of the military romance, the style remains relevant today. For some it's a way to Express yourself or emphasize their belonging to certain sectors of society or groups, someone attracted to the convenience and ease of garment care. Summer "Cayman" durable, comfortable and functional. They are chosen by people leading an active way of life, accustomed to walk on long Board, skateboard or bike. A fabric consisting of cotton and polyester, hygienic, keeps the shape well, does not shrink and hardly creases. Due to these qualities are good, both in the city and in the country. The abundance of pockets allows you to completely free your hands, and if need be, it can fit the right amount of props. Black soft Jersey adjustable wide belt will save you from having to buy new pants during seasonal or post field change shapes. Reinforced articulated knees won't restrict movement. In these pants you can easily walk through life, especially about anything without thinking.
The classical model of the armed forces Worn worn outside You can use fanspage Zipper The belt is adjustable in size using the side elastics Pockets: 4 external pockets 2 inside pockets Materials: 100% cotton YOU MAY BE INTERESTED IN: Officers at all times sacredly cherished the honor of the uniform. On the courts of officer honour were legendary, and the word of the officer constituted irrefutable proof. Introducing "Jacket and field officer". Made of breathable cotton fabric, the form is not tiring in the heat or motion and irritate the skin. Shaped jacket with zippers worn outside their trousers. Four outside and two inside pockets allow to place all necessary. Provided the use of fanspage. The belt is adjustable. Classic wide with three pockets and belt officers belt. We hope that the "Jacket and field officer" little to do you harsh everyday life.
The modern model of straight-leg Materials: 100% Cotton Product weight: 44 R-R – 130 g 48 R-R – 145 g 52 R-R – 156 g 54 R-R – 167 g
The classical model of the armed forces Classic style The loops wide waist belt 2 side pockets and 1 back pocket Material: 100% cotton The officers of the army before the revolution piously protected the honor of the uniform. On the courts of officer honour were legendary, and the word of an officer is law and irrefutable proof. Our field officers form honour drop is simply impossible! Introducing "Jacket and field officer". Made of breathable cotton fabric, the form is not tiring in the heat or motion and irritate the skin. Shaped jacket with zippers worn outside their trousers. Four outside and two inside pockets allow to place all necessary. Provided the use of fanspage. The belt is adjustable. Classic wide with three pockets and belt officers belt. We hope that the "Jacket and field officer" little to do you harsh everyday life.
The classic model You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 100% Cotton
REVIEWS: Review the website "Russel"
The material of the case: Oxford (Oxford) - 100% nylon with coating Size: 34×24×1.8 cm Weight: 242 g The outer layer of the fabric increases durability and longevity of the seat
The manufacturer's website: www.propper.com/
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 113 g Size (In×W×T): 17,5×14×6.5 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carry case Patriotic army of 800 ml flasks, on the button Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Valve with a hole in the center for the lid of the jar, completely covering the top (except the cover). Fastens with a button that is hidden under the surface of the valve to protect against pullout and flare with the abrasion of the coating. Handy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
The classic model of the military with low tilted fields short Hard stitched fields Cord with easy locking mechanism Small eyelets on the sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.) Material: Rip-stop, 100% cotton Lining: cotton calico
Classic style The loops wide waist belt Two front and one back pocket closed by flap and snap Material: 100% cotton
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 29 g Size: 14,5×5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerMagazine pouch with Velcro under one store to modern pistols (TL, APS, Glock 17, SIG-Sauer P226, etcD.). With adjustable height and lateral utjazhki. Can also be used for carrying a variety of large folding knives, flashlights and so onp. items (dimensions – height about 12-14 cm, a diameter of 3 cm). Not compatible with RM stores and multitools (too short), it is recommended to purchase a Pouch under multitool or small. gas. cylinder Mount: one removable clip, batteries not included. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase one clip of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit shop The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks at least 3 cm in height pistol shop, which is convenient for its removal The cross section of the pouch is dragged 35 mm sewn elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the end of the valve 2 cm skill for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 55 g Size (In×W×T): 16×8×3.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for the grease fitting PC Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height A Velcro flap, with the easy skill of lines at the end At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Size: 6,5×2.5 x9 cm Weight: 35 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for the pack of cigarettes with disposable lighters (Cricket, BIC® andD.) Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height Conveniently placed on the strap of a backpack or a Trouser belt Separate compartment for cigarette pack fastens with a flap of complex shape, protecting contents from ingress of dirt and moisture. Velcro, with the easy skill of slings Side compartment for standard disposable lighter size, the valve of straps with Velcro At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size back walls: 28×18 cm The size of the main compartment: 26×16×9 cm Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 356 g Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun tape. Improved model replacing the old one Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation The pouch fastens with Duraflex®, ability to adjust. Belt is stitched from the bottom to the top, forming a power frame Cover with sides to protect the content from moisture and dirt. Its design has been improved compared to the old model The dimensions of the main compartment of the pouch is reduced compared to the old model for a more tight fit In the walls of the pouch between the layers of fabric sewn hard plastic inserts. They maintain the shape of the pouch, facilitating the introduction and extraction of the box. Also thanks to this convenient to use with cartridge belts without box Outer side surface is sheathed cells PALS for mounting additional pouches (three rows of two cells on each side) The pouch is sewn entirely of two layers of fabric Cordura® 500d At the bottom of the inside reinforcement of 60 mm slings to protect from rubbing lever cover lock boxes On the side near the bottom has a grommet for drainage water All edges of the fabric and the ends of the sling is turned over or hidden in the seams for reliability and neat appearance REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Is put on a fabric collar and is fastened by buttons to the coat
The volume of drinking system up to 3 l Weight with drinking system: 0,62 kg Main fabric: 600D Polyester Accessories: Duraflex Comfortable backpack drinking system, offline use, and complete with handling systems and vests MOLLE webbing on the front surface for attachment of pouches (four cells wide and five horizontal rows strop in height) The walls of the backpack is sealed by a heat insulating material to maintain the temperature of the contents of the drinking system Hose drinking system is displayed directly on the shoulder strap (on both right and left) MOLLE webbing on the back to secure the backpack on the vest and unloading. Clips not included and sold separately (requires 4 PCs.) Convenient carry handle Straps with quick reset (fastech), with the points of attachment of the tube of the Hydrator (Velcro fasteners) Removable chest coupler Inside the main compartment for the suspension volume on the buckles Back pocket flat-stitched throughout entire height of the backpack with a simple top entry with Velcro and snap button. It is used for removing the inside of the straps when the Hydrator is used as a pouch on the back and unloading platforms It is possible to install drinking system (not included!)
Is put on a fabric collar and is fastened by buttons to the coat
Size: 26×15,5×9 cm Weight: 288 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun belt, the buckle "AAT". Discontinued, replaced by a Pouch under machine-gun box v.2 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height On top of the valve has a handle for carrying the pouch Lining – fabric Oxford 210d (100% nylon) In the walls of the pouch sewn hard plastic inserts. They increase the strength and maintain shape of pouch. It is necessary for more convenient installation and removal of the box. Also convenient to use with cartridge belts without box Side at the bottom of the pouch has a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
The manufacturer's website: www.propper.com/
Volume: 53 l Weight: 2.4 kg Main compartment (W××T): 35×59×21 cm Main fabric: 600D Polyester Accessories: Duraflex Designed for Russian special forces. Designed for use in special forces All exterior area of the container covered slings MOLLE Volume power frame from a sling, reinforced construction of the bottom attachment straps Removable, adjustable straps. Large width, anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Cell MOLLE for attachment of pouches A new spin thanks to a multilayer structure has high rigidity and ensures excellent ventilation. On the inner surface of a removable vertical battens Removable wide belt. Side delays, cell MOLLE for attachment of pouches Ties with postexam top and on the sides of the container to minimise the volume and relieve tension on the zipper Has numerous interior pockets and compartments from the grid At the bottom of the compartment for removable garmoshechka. Germogena included
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 127 g Size: 16×15×9 cm Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall rear pouch for the insert buckle. Improved model replacing the old one. Can be used for carrying drum shops of the PKK. Structurally, it is a full analogue of the Pouch under the mask/the Luggage, but with different dimensions (wider and shorter). Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are biased upwards relative to the old position and stitched in a classical way (with an interval between the rows of wide slings). Just two rows in height. Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling UniClick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Material: 100% Cotton
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Size: 6×5×12.5 cm Weight: 50 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch with zipper for compact camera ("point and shoot") with foam in the walls to protect the contents, and / or other objects of suitable dimensions Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height The whole is a sandwich of three layers Cordura® 500d (external durable fabric), semi-rigid foam to support the shape and protect the contents from shock, and lining fabric 210d Oxford On two-way zipper convenient manners Inside on the back wall a small flat mesh pocket (e.g. for memory cards) REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 114 g Size: 21×12,5×4 cm (excluding VOG-25P) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for five shots grenade launcher VOG-25 and VOG-25P, Velcro and snap button. The pouch is oriented vertically, the shots are extracted sideways. An improved version of the old model Pouch for grenades VOG-25 (mod.2). Produced analog with a horizontal orientation (the shots are popped up or down) Mount: two or three removable clips, not included. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two or three identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 125 mm 5" TacTie (Maxpedition) Long MALICE (Tactical Tailor) FixClip 5" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE The shots are arranged horizontally in the pouch Each compartment of the pouch fastens with Velcro and a button. The button has two positions, calculated as the VOG-25 and longer shots VOG-25P Valves offices have a complex shape, protecting contents from dirt and water In the new pouch button flap covered the outside of the sling to protect from ejection and flare with the abrasion coating At the ends of the valves the easy manners of slings with a thickening at the end Through the use of a removable clip magazine pouch is equally convenient to use both the left and on the right side of the trunk, K. the pouch may be turned upside down. This pouch must be installed so that separation of the pouch open in a forward direction relative to the arrow. The clip must watch lock down (in this case, the fastening is more reliable), and is fixed to the top ten slings UniClick on the back of the pouch (in this case, the top of the pouch will not SAG under its own weight) Compared with the old model dimensions platform with offices under the shots were reduced to a minimum, making the pouch smaller interfere with neighboring equipment The new stickies have even more area for secure fastening, and is sewn in two passes around the perimeter for durability All the tissue sections and lines edged for reliability and neat appearance At the bottom of each compartment of the pouch has a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
100% thickness 2.5 mm Breaking load 125kg (275lb) On a reel 100 feet (~30 meters) Weight 125 gram skein WARNING - this cord is not intended for use as insurance!!! The manufacturer's website
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 62 g Size: 8,5×14×5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10 cartridges 12 or 20 gauge with Velcro. Improved model replacing the old one Mount: two or three removable clips, not included. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two or three identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm Through the use of detachable clips to the significantly improved reliability of fastening to the belt compared to the old model pouch, reduced from hanging out of the pouch when working with valve Pouch sewn inside the 10 cells of elastic tape, which are inserted into the cartridges 12 and 20 gauge. Elastic band sewn flush with the entrance to the main compartment, which facilitates the entry of cartridges (unlike many analogues, in which the gum is recessed downwards) In case of need can be carried in the pouch for 6 extra rounds, putting them in the middle between the elastic rows of cells staggered with respect to the main rounds The pouch is sewn entirely of two layers of fabric Cordura® 500d The main compartment of the pouch has a small height (5 cm), therefore above the entrance stands out about 1 cm from the height of the cartridge, which facilitates its extraction In the middle of the valve sewed extra Velcro which allows you to sostenute folded valve itself. While the pouch remains open, the valve does not prevent access to the cartridges, the Velcro does not apply to hands. It also increases the rigidity of the valve, maintaining its shape Long skill in the form of a loop of webbing at the edge of the valve for easy opening of pouch The tissue sections and Velcro edged for reliability and neat appearance All sections of the sling hidden under the edging At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Multifunctional accessory, made on seamless technology, protects against sun rays and wind The fabric dries quickly, ideal for active sports A large number of rascvetok and use cases allow the use of MULTI-bandana as a fashion accessory that complements any suit Materials: 100% modified polyester Size in flat form: 25×47 cm Weight - 35 g Use cases: Manual: It is possible to use as a retention bandage: REVIEWS: Review the website "Russel" Review from Green7-62
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×17,5×3.5 cm Weight: 127 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock 2 of shingles under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: two or four removable clips, not included. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase two or four identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit stores. It is recommended to place the stores cover up Pockets separated by a tiny gap, widening the stores relative to each other. This allows you to clenching your fingers separate store on the sides without interference from a nearby store. In addition, it protects the stores from the collision Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around the upper sling UniClick). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the shop, independent for each of the two pockets of the block. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pockets of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the shops, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when mounting them on top of the same block 2 of shingles BCC/M4 single shingles or BCC/M4, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of shops without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 132 g Size (In×W×T): 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping. Discontinued, replaced with magazine Pouch for 2 MAG. AK Velcro adjustable v.2 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely retain two and one store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted). The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer mode quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling Uniclick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
100% the thickness of 1.18 mm Breaking load 45.3 kg (100lb) On a reel 125 ft (~38 meters) The weights of the rolls of 47 gr WARNING - this cord is not intended for use as insurance!!! The manufacturer's website
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 114 g Size: 12,5×21×4 cm (excluding VOG-25P) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for five shots grenade launcher VOG-25 and VOG-25P, Velcro and snap button. The pouch is oriented horizontally, the shots are popped up or down. An improved version of the old model Pouch for grenades VOG-25 (mod.2). Produced analog with a vertical orientation (the sideways shots are extracted) Mount: three or five removable clips, not included. For mounting on a classical system PALS/MOLLE need five cells in width and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase three or five identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): MOLLE 2M 60 mm ALICE The shots are arranged in vertically pouch Each compartment of the pouch fastens with Velcro and a button. The button has two positions, calculated as the VOG-25 and longer shots VOG-25P Valves offices have a complex shape, protecting contents from dirt and water In the new pouch button flap covered the outside of the sling to protect from ejection and flare with the abrasion coating At the ends of the valves the easy manners of slings with a thickening at the end Through the use of a removable clip magazine pouch can be placed upside down to extract the shots down. The clip must watch lock down (in this case, the fastening is more reliable) Compared with the old model dimensions platform with offices under the shots were reduced to a minimum, making the pouch smaller interfere with neighboring equipment The new stickies have even more area for secure fastening, and is sewn in two passes around the perimeter for durability All the tissue sections and lines edged for reliability and neat appearance At the bottom of each compartment of the pouch has a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 176 g Size: 21,5×10,5 (specified minimum height) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerNon-insulated case for carrying shirokogorloy 1l Nalgene bottle (including non-standard cap), its equivalent from Alloy – jar TR-1000, thermoses SY-750 and SBM-750, and other cylindrical objects of similar dimensions. Also accommodates adequately American military canteen, Nalgene OASIS canteen 1 QT and TR M-1000. The pouch can be used as a fallback to carry two 8-charging shops saiga/Vepr-12, or a stove JetBoil Flash Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The pouch entirely from two layers of fabric Cordura® 500d for durability and maintaining rigid form Cover complex shapes, protects contents from dirt and water. Fastens with adjustable fastex, the parent of which is attached to the surface of the fabric. The installation location of the fastex enhanced inside the second layer of fabric. Due to the adjustment can use non-lid, increasing the height of the bottle, such as Nalgene OTF LID or MULTI-DRINK REPLACEMENT. It is recommended to tighten the fastex sling to prevent rocking of the bottle when walking The pouch and the lid have a circular cross-section, is free for unimpeded placement inside the Nalgene bottle with a plastic on its bottom with a suitable glass (e.g. Tatonka Handle Mug) and camp utensils (spoons, forks). Cutlery should be laid vertically along the corners of the rear wall of the pouch On the underside of the top cover stitched flat pocket for small items. It is easy to carry tea bags or instant coffee and disinfectant tablets The outer surface is sheathed cells PALS for mounting additional pouches. 7 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. Vertical lanyard fastex freely passed though the upper middle cell PALS. When using odnomarshevoy American jar sling should be put on top of the cell, K. requires strong tightening of the pouch height All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion The review of the prototype from Green7-62 YOU MAY BE INTERESTED IN:
100% polyester Length without buckle: 18 cm Weight: 18 g
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 25 g Size: 12,5×5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerCompact pouch with Velcro, specially designed to carry the most popular models of multitools (LEATHERMAN®, SOG®, Victorinox SwissTools, etcD.) or small gas canister. With adjustable height and lateral utjazhki. You can also use for carrying shopping 1-2 PM, various small pocket knives, flashlights, and sop. items (dimensions – height about 9.5-13.5 cm, diameter 3 cm). Not compatible with modern shops pistols type AES, APS, Glock 17, SIG-Sauer P226 (too high), it is recommended to purchase a Pouch under the pistol store Mount: one removable clip, batteries not included. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase one clip of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed to fit the multitool. No pockets under the bit sets, extension cords etcp. accessories, only separately multitool The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch Peeps at least 2.5 cm of the height of the multitool or pepper spray, which is convenient for its removal The cross section of the pouch is dragged 35 mm sewn elastic band. Due to the tightening object tightly held in the pouch even when open the valve The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible squares when adjusting for items of different heights At the end of the valve 1 cm skill for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion Review from Green7-62 YOU MAY BE INTERESTED IN:
Size: 8,5×2×16 cm Weight: 56 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerProduction is halted REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 58 g Size: 14,5×10×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 pouches with Velcro for shops to modern pistols (TL, APS, Glock 17, SIG-Sauer P226, etcD.). With adjustable height and lateral contractions. Can also be used for carrying a variety of large folding knives, flashlights and so onp. items (dimensions – height about 12-14 cm, a diameter of 3 cm). Replaces the old model Unit with 2 pistol pouches under the stores. Not compatible with RM stores and multitools (too short), it is recommended to purchase a Pouch under multitool or small. gas. cylinder Mount: two removable clips, not included. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit shops The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength Each branch looks at least 3 cm in height pistol stores, which is convenient to retrieve them The feature of this product is noticeable (1.5 cm) gap between the branches, whereby between the covers of the two stores formed the gap. It greatly facilitates the extraction of shops, K. allows you to fold the cover store separate fingers without interference from a nearby store The cross-section of each branch is dragged 35 mm sewn elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the ends of the valves 2 cm of manners for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Size: 16,5×6,5×5 cm Weight: 71 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for glasses zipper soft lining Mount: one removable clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height The pouch closes with a zipper odnokomnatuyu Metal carabiner for hanging the pouch Lining (protection from scratches) and a layer of soft foam (shock protection) The pouch is positioned vertically, the entrance side zipper. Thanks to the removable clip can be installed upside down, soE. the entrance will be on the opposite side Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 136 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 28×9,5×7.5 cm (height given for RPK-74, taking into account the thickness of the insert buckle) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two shops RPK or RPK-74. Velcro fastener fastex and Duraflex® with possibility of adjustment. Simple reliable design. Discontinued, replaced with magazine Pouch for 2 MAG. V PKK.3 Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The pouch closes with a Velcro fastener adjustable, secure grip in case 1 and 2 shops Duraflex fastex® with possibility of adjustment. sewn to the edge of the valve pouch and works as a handy skill for faster opening The pouch is sewn entirely of two layers of fabric Cordura® 500d All edges are fabric edged for reliability and neat appearance All the ends of the sling UniClick hidden under the edging or seams Velcro straps and fastex repeatedly stitched around the perimeter and the diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 135 g Size: 14,5×16,5×6 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with zipper with internal organization, square shape. The numbers in the title (4×2) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is perfect little organizer for handling systems and for PALS/MOLLE backpacks zones (zone must be a minimum of 4 cells PALS in width). The pouch is specially designed to be compatible with backpacks of manufacturing the Alloy Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall two volume pockets for small items, on the front wall one large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 258 g Size: 25,5×16,5×12.5 cm (minimum height is specified) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerLarge rear pouch for the insert buckle with protection of small contents from falling out and height adjustment. For large load. Convenient to increase the quantity of backpacks and Luggage/unloading on utilitarian systems. Can be used as a fallback to carry the 100-machine gun cartridge box or ribbons (it is recommended to use more durable and rigid specialized the pouch). Inside shirokogorloy two standard 1l Nalgene bottle or equivalent from Alloy Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height. The presence of clips throughout the rear area of the pouch without empty spaces can confidently carry great weight, the pouch tight to the platform The tube of light fabric 210d Oxford, protects the contents of a small pouch from falling out, allows to increase the height of the pouch (6 cm high). Tightening the paracord and lock Duraflex®. The exit of the cord from the edges of the tube reinforced with a braid and multiple bartacks, eyelets are not used, K. they are due in the field Cover complex shapes, protects contents from dirt and water, covers the tube at any height Hooks on the insert buckle Duraflex®, ability to adjust. Paternal fastex sling continues down the bottom to the back wall, forming a frame. Also this means very much to pull the volume of the pouch. To lanyard fastex does not SAG, it is passed though the sewed to the front wall of the pouch loop made of horizontal lines. The size of the loop large enough to easily pass through it fastex, without removing it from the lines The corners of the bottom rounded Outer side surface is sheathed cells PALS for mounting additional pouches (e.g., pouch utilitarian zipper 3x3). 3 cells in width, 3 rows in height on each side All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
 
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 200 g Size: 14,5×23,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch zipper internal structure horizontally oriented. The numbers in the name (6×2) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch perfect organizer for unloading systems, a simple belt from a small sling backpacks, as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells in width and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall a large flat zipper pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 76 g Size (In×W×T): 20×9,5×2.5 cm (the minimum height is specified) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 pouches with Velcro under the common shops in Russia models of submachine guns. With adjustable height and transverse contractions Mount: two removable clips, not included. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. Attention! For attaching pouch you must purchase two of the same clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 125 mm 5" TacTie (Maxpedition) Long MALICE (Tactical Tailor) FixClip 5" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm Compatible with the following shops: 30 charger 9×19 PP-19-01 Vityaz/saiga-9 30 charger 9×18 PM PP-90 30 charger 9×18 PM Kedr PP-91 30 charger 9×18 PM AEK-919К Chestnut 30 charger 9×21 SR-2 Veresk 20 charging 9×19 PP-2000 30 charger 9×19 HK MP-5 32-x 9×19 UZI The pouch is designed for snug fit shops The main compartment of the pouch is sewn entirely of two layers of fabric Cordura® 500d for strength. The valves are made of a single layer of 38mm nylon webbing Each branch looks at least 3 cm height of the shortest of the shops, which is convenient to retrieve them The cross-section of each branch is dragged 50 mm sewn-in elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the ends of the valves 2 cm of manners for easy unzipping of the pouch even in thick gloves All Velcro is sewn with a reinforced way All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 19,5×17,5×3 cm Weight: 160 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock 2 of shingles under 30 charging the stores of the AK-74/AKM. You can also use the shops RPK-74/PKK Mount: two or four removable clips, not included. For mounting on a classical system PALS/MOLLE need four cells wide and two to three horizontal rows of cells in height. Attention! For attaching pouch you must purchase two or four identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 125 mm 5" TacTie (Maxpedition) Long MALICE (Tactical Tailor) FixClip 5" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit stores. It is recommended to place the stores cover up Pockets separated by a tiny gap, widening the stores relative to each other. This allows you to clenching your fingers separate store on the sides without interference from a nearby store. In addition, it protects the stores from the collision Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around the upper sling UniClick). Length of cord with a margin that takes into account the height of the shop RPK-74/PKK and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers In this pouch I have the manners of a Y-shaped (bisected to the bottom). When using the shopping AKM and RPK-74/PKK because of their strong curvature of ordinary skill can fall on you from too inclined cover, so splitting some of the habits worn at the top corner of the store, providing a secure hold Removable adjustable utyazhka of 4 mm elastic cord that spans across the shop, independent for each of the two pockets of the block. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pockets of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the shops, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when mounting them on top of the same block 2 of shingles or AK single AK shingles, two layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of shops without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Warranty: 2 weeks. Material: 200d Polyester Volume: 40 HP Features: transparent insert packing weight kg: 0.18 packaging dimensions see: 38*25*2 Lightweight and compact waterproof bag with transparent window to identify contents. Perfectly protects against moisture from entering and allows you to reduce the amount of equipment. The design of the bag will effectively and compactly folded contents. Convenient screw top with insert buckle ensures a tight seal.
Material: polyester Volume: 30 L. packing weight kg: 0.18 Lightweight and compact waterproof bag with transparent window to identify contents. Perfectly protects against moisture from entering and allows you to reduce the amount of equipment. The design of the bag will effectively and compactly folded contents. Convenient screw top with insert buckle ensures a tight seal.
Weight: 2,26 kg. All sizes: height 73 cm // width 34 cm Warranty: 6 months. Material: PoLYESTER 600d WaTER RESiST. Volume: 75 h Features: Suspension system: VRaC (velcro regulation air comfort). packing weight kg: 2.26 packaging dimensions see: 73*34*10 Bottom entry, quick access to main compartment, side zip pockets, suspension system make this model a quality tool in the hands of an experienced, and, help, in the hands of beginners.  VRaC (velcro regulation air comfort) The system is based on the smooth adjustment of the shoulder straps of the harness. Models medium volume system VRaC allows you to adjust the backpack on growth and the human figure. Key features Type: unisex trekking Suspension system: anatomical, chest coupler, zone belt Volume: 75 l Side screed: there Weight: 2.26 kg Dimensions (Wksht): 80х36х24 cm Color: blue Functionality Back vent: there The top flap: there are height-adjustable, with pocket Additional access: the lower entrance(with a partition in the main compartment) Pockets: side pockets, front pocket Laptop compartment: no Reflective elements: no Pocket for points: no
Weight: 1,52 kg. Waterproof: 5000 mm. a water column. All sizes: 230х120 see Height: 130 see Warranty: 6 months. Frame: durapol. Floor material: reinforced polyethylene. The material of the outer: 100% polyester 190T/75D 5000 mm of water. article Rip-stop. Finishing seams: taped. Features: The floor transforms into a wall. packing weight kg: 1.52 WoodLand tent Fishing Tent - tent-tent for fishing lovers.  Protects from sun, wind or rain. • Single layer tent-canopy specially designed for fishing. • A floor made of reinforced polyethylene is transformed into the wall of the tent in case of heavy rain. • Compact design and light weight. • Two ventilation hole. • Pockets for small items. • External awning of tent is resistant to UV radiation, wind and rain. • Taped seams special tape to protect from penetration of moisture inside the tent.
Weight: 3 kg. All sizes: 70*50*61 cm Warranty: 6 months Frame: steel (arc 16 mm and 20 mm) Material: MDF 2.8 mm packing weight kg: 3.560 packaging dimensions see: 80*60*70 Folding table Woodland "Camping Table" is intended for creation of comfortable conditions in Hiking, fishing and camping.  Features: - Compact foldable design.- Durable steel frame with coating..- Material countertops - MDF.- Convenient carrying handle.- The maximum permissible load of 20 kg.
Weight: 1.25 kg. All sizes: height 70 cm // width 36 cm Warranty: 6 months. Material: 200/400 PoLYESTER/600d WaTER RESiST. Volume: 50 L. Features: Suspension system: RS (relax system). packing weight kg: 1.25 packaging dimensions see: 70*36*10 Backpack WoodLand "Storm 50" is comfort and convenience for climbing or walking. Light weight and large volume. Convenient external pocket with easy access holds all the necessary equipment. Features of backpack: Valve fixed, with pocket in waterproof zipper. One entrance to main compartment to top. Roomy front pocket with vertical load. Suspension point with drinking system on VELCRO (Velcro). Wide wings lap belt. S-shaped shoulder straps. Chest coupler with a rubber compensator. Plastic accessories YKK.
 
Temperature range,With: - 60 Material: EVA (ethylene vinyl acetate). Sole foamed polyurethane Filler: 7-ply insulation with frothed PU, hollofiber and foil Features: PU studded sole packing weight kg: 2.14 packaging dimensions see: 51*40*15 Take a walk outside in -60C? Easy! Boots for the most severe frosts, though now in the North pole. Such a warm Shoe You've ever seen! Everyone knows the adage, "keep your feet warm and head cold". Really, what the weather was outside, it is very important that your feet remain dry and not frozen. This is especially true for fans of winter recreation, fishermen, hunters, who spend a long time outdoors. But a good winter boots will definitely be good for the guards, and in the holiday cottage. Very light, comfortable and warm impossible to walk in these boots a pleasure! Features boots Woodland POWER PU: Light weight, good frost resistance, high termoyadernye properties comparable to thermal properties of milled footwear to avoid frostbite when operating at temperatures from - 60 ° CReliable strength, high abrasion resistanceReliable protection against mechanical damage (the sole is made of PU material almost punctured)Sole made of PU in deep winter the tread provide excellent grip on any surface, spikes integrated into the soleMaterial used – EVA the enhanced formula with a high content of rubber is for flexibilitythe liner – insulation combines unique layers of the membrane mesh, foil, absorbent fibers, innovative modern synthetic materials and natural wool. All parts of boots can be easily removed to dry and sanitize.Individual branded box.
Temperature range,With: - 60 Material: EVA (ethylene vinyl acetate). Sole foamed polyurethane Filler: 7-ply insulation with frothed PU, hollofiber and foil. Features: PU sole packing weight kg: 2.74 packaging dimensions see: 50*40*15 Take a walk outside in -60C? Easy!Boots for the most severe frosts, though now in the North pole.Such a warm Shoe You've ever seen! Everyone knows the adage, "keep your feet warm and head cold". Really, what the weather was outside, it is very important that your feet remain dry and not frozen. This is especially true for fans of winter recreation, fishermen, hunters, who spend a long time outdoors. But a good winter boots will definitely be good for the guards, and in the holiday cottage. Very light, comfortable and warm impossible to walk in these boots a pleasure!   Insole length Leg opening Shaft height Compliance with the size Winter boots WOODLAND POWER EVA (1328)         R.41   52 32 40 R.42   54 32 41 R.43   54 32 42 R.44   55 32 43 R.45   55 32 44 Temperature up to-60COutsole of TPU protects from punctures and slidesPerforated insole made from EVA condensate collects excess moisture (insulation remains dry)7-ply insulation with frothed PU, hollofiber and foil.The ability to set spikes.Individual packing
Temperature range,With: -70 Material: EVA (ethylene vinyl acetate). Filler: 8-ply insulation Features: Operating temperature down to -70C. Low heat output, the elasticity of the material at low temperatures ekstremalne packing weight kg: 2.3 packaging dimensions see: 50*40*20 Take a walk outside in -60C? Easy! Boots for the most severe frosts, though now in the North pole. Such a warm Shoe You've ever seen! Everyone knows the adage, "keep your feet warm and head cold". Really, what the weather was outside, it is very important that your feet remain dry and not frozen. This is especially true for fans of winter recreation, fishermen, hunters, who spend a long time outdoors. But a good winter boots will definitely be good for the guards, and in the holiday cottage. Very light, comfortable and warm impossible to walk in these boots a pleasure! Woodland boots are made of frothed material EVA (ethylene vinyl acetate) with a low degree of heat transfer due to the porous structure of the material. Woodland series presents a whole line of models with temperature control from -45S to -70C. The main characteristics of EVA are: Low heat output, the elasticity of the material at low temperatures ekstremalne, minimum product weight (500gr pair), complete watertightness.    Operating temperature down to -70C 8 layers insulation:1. Soft fur with sheep's wool content2. Knitted fabric3. High-tech non-woven fabric with structrural fibers mimicking the structure of hair, allowing you to achieve greater conservation of heat.4. The nonwoven fabric with the content of flax and wool.5. Foil6. Mesh to protect the foil from istiranija7. Igloprobivnoj fabric with non-absorbent fibers8. Removable insole with reflective effect. Frothed polyethylene closed-cell foam covered with aluminum foil.
All sizes: 41-42,42-43,44-45,45-46. Temperature range,With: -55C Material: EVA (ethylene vinyl acetate). Filler: 8 layers insulation: 1. Soft fur with a content of wool 2. Knitted fabric 3. High-tech non-woven fabric with structrural ox Features: Operating temperature down to -55C. Low heat output, the elasticity of the material at ekstremalne low temperatures, the minimum weight of the product (50 packing weight kg: 2.28 packaging dimensions see: 49*40*19 Take a walk outside in -50C? Easy! Boots for the most severe frosts, though now in the North pole. Such a warm Shoe You've ever seen! Everyone knows the adage, "keep your feet warm and head cold". Really, what the weather was outside, it is very important that your feet remain dry and not frozen. This is especially true for fans of winter recreation, fishermen, hunters, who spend a long time outdoors. But a good winter boots will definitely be good for the guards, and in the holiday cottage. Very light, comfortable and warm impossible to walk in these boots a pleasure!   Insole length Leg opening Shaft height Compliance with the size Winter boots WOODLAND GRAND EVA (970-55)         R.42   51 33 42 R.43   52 33 43 R.44   53 33 44 R.45   54 33 45 Woodland boots are made of frothed material EVA (ethylene vinyl acetate) with a low degree of heat transfer due to the porous structure of the material. Woodland series presents a whole line of models with temperature control from -45S to -70C. The main characteristics of EVA are: Low heat output, the elasticity of the material at low temperatures ekstremalne, minimum product weight (500gr pair), complete watertightness.
All sizes: 36-41 Material: EVA (ethylene vinyl acetate). Filler: fur 100% wool/ Knitted fabric with the addition of special hydrophobic fiber/fabric made of linen and wool/Foil metallisers packing weight kg: 1.16 packaging dimensions see: 41*41*14 With her husband on a fishing trip, a walk with the child, to the supermarket for groceries, take the dog? Whether on the street at least -40° C, the frost you will transcend! Believe me, women's winter boots may also be incredibly warm and very comfortable, and at the same time look stylish. No matter whether you leave for 5 minutes to the store or going to spend in the cold for several hours, be certain these are the boots you will not freeze. They are very comfortable, like Slippers, like you never even left the house!   Leg opening Shaft height Compliance with the size Winter boots WOODLAND EVA -45 (990-45)       R.36-37 43 27 37 R.37-38 43,5 27 38 R.38-39 45 27 39 R.40-41 46 27 41 Women's boots from EVA (frost resistant material). Cuff boots, made of waterproof Oxford cloth . Equipped with removable stocking is made of 6 layers of natural materials with additional reinforcement of the heel part. The heat temperature is maintained until -45S
Material: EVA (ethylene vinyl acetate). Filler: fur 100% wool/ Knitted fabric with the addition of special hydrophobic fiber/fabric made of linen and wool/Foil metallisers Features: Lightweight and comfortable cold-resistant boots with 6-ply insert packing weight kg: 1.16 packaging dimensions see: 41*41*14 With her husband on a fishing trip, a walk with the child, to the supermarket for groceries, take the dog? Whether on the street at least -40° C, the frost you will transcend! Believe me, women's winter boots may also be incredibly warm and very comfortable, and at the same time look stylish. No matter whether you leave for 5 minutes to the store or going to spend in the cold for several hours, be certain these are the boots you will not freeze. They are very comfortable, like Slippers, like you never even left the house!   Leg opening Shaft height Compliance with the size Winter boots WOODLAND EVA -45 (990-45)       R.36-37 43 27 37 R.37-38 43,5 27 38 R.38-39 45 27 39 R.40-41 46 27 41 Women's boots from EVA (frost resistant material). Cuff boots, made of waterproof material "Oxford". Equipped with removable stocking is made of 6 layers of natural materials with additional reinforcement of the heel part.The temperature of heat stored up to -45°CBoot height 32 cm
All sizes: 40-41,42-43,43-44,45-46,46-47. Material: EVA (ethylene vinyl acetate). Filler: Seven-layer insulation: Soft fur with a content of wool // stockinet // Nonwoven fabric with the content of flax and wool // Foil // Mesh to protect the foil from abrasion, Needle break fabric with non-absorbing fibers //removable insole. Features: Low heat output, the elasticity of the material at low temperatures ekstremalne, minimum product weight (500gr pair), full water packing weight kg: 1.14 packaging dimensions see: 55*55*18 Declare fight the cold! Winter is not the time to sit at home. Do not delay on fishing, hunting, walk in the snowy Park. Even if the window -40S, low temperatures will not prevent you to enjoy the fresh air, if you have warm winter boots! Incredibly lightweight, frost-proof men's boots with high-tech multilayer insulation containing organic wool will keep your feet in comfort and protects against penetrating icy winds in winter. Take care of your health, protect your feet!   Insole length Leg opening Shaft height Compliance with the size Winter boots WOODLAND CLASS EVA (960-45)         R.40-41   49,5 30 41 R.42-43   50 30 43 R.43-44   50,5 30 44 R.45-46   51 30 46 R.46-47   51,5 30 47 R.47-48   52 30 48 Woodland boots are made of frothed material EVA (ethylene vinyl acetate) with a low degree of heat transfer due to the porous structure of the material. Woodland series presents a whole line of models with temperature control from -45S to -70C. The main characteristics of EVA are: Low heat output, the elasticity of the material at low temperatures ekstremalne, minimum product weight (500gr pair), complete watertightness.
Material: EVA (ethylene vinyl acetate, fur 100% wool Material of inner: the fabric is made of linen and wool/metalized Foil/Membrane mesh/non-Woven synthetic needle-punched fiber Features: Lightweight and comfortable cold-resistant boots with 6-ply insert. To -45S packing weight kg: 1.16 packaging dimensions see: 41*41*14 With her husband on a fishing trip, a walk with the child, to the supermarket for groceries, take the dog? Whether on the street at least -40° C, the frost you will transcend! Believe me, women's winter boots may also be incredibly warm and very comfortable, and at the same time look stylish. No matter whether you leave for 5 minutes to the store or going to spend in the cold for several hours, be certain these are the boots you will not freeze. They are very comfortable, like Slippers, like you never even left the house!   Leg opening Shaft height Compliance with the size Winter boots WOODLAND EVA -45 (990-45)       R.36-37 43 27 37 R.37-38 43,5 27 38 R.38-39 45 27 39 R.40-41 46 27 41 Women's boots from EVA (frost resistant material). Cuff boots, made of waterproof material "Oxford". Equipped with removable stocking is made of 6 layers of natural materials with additional reinforcement of the heel part.The temperature of heat stored up to -45°CBoot height 32 cm
Waistband too high to protect the lower back from the cold The loops wide waist belt Slits with zipper on each side for easy donning shoes Elastic band at the bottom of the pants does not allow them to creep up Four pockets Material: Oxford (Oxford) - 100% nylon with coating "Tourist" - 100% polyacrylic, nylon-coated Insulation: The batting 150 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size Warm, durable, windproof and water-repellent due to the used in their manufacture Oxford fabric (100% nylon with coating), trousers combined with jackets "Delta" or M4, but other options are possible. In these pants the cold, snow and wind are not afraid of you. Insulation – synthetic fiber polyester wadding (150 g/m2) does not absorb moisture and is not afraid to frequent washings. In contrast to the expensive membrane fabrics and down insulation, these materials do not require complex care. Service, work or leisure in the fresh air will be much nicer, if you are ready for the bad weather.
Modular unloading vest. Discontinued, replaced by Modular vest Basis Main material: Cordura® 1060d Universal use due to modular gear machine gunners, snipers, machine gunners, grenadiers and Riflemen-techs, infantry and mountain areas The entire surface of the vest is covered with MOLLE cells, straps stitched completely together. Free choice of saturation depending on the task - you can mount pouches to the ALICE system, UniClick, PALS/MOLLE, MTS Plus, the pouches on MALICE clips, Speed Clips (BLACKHAWK!) On the shoulders of the insert of soft foam helping to distribute the load on your shoulders and suppress the impact when the stop butt On the belly from the inside two pockets for cards/documents from water-resistant fabric, closed with Velcro. Velcro closure for secure sewn along the entrance to the pocket, has a handy skill of opening lines for In the upper part of the shoulders sewn hard stops, prevents slipping gun belt The jacket fastens with a zipper large tractor type with excellent skill in the language of the castle. Top zipper covered with dirt protective strap Velcro strap has the skill of slings The kit includes removable hinges (6 pieces) for discharge of the suspension/pistol belt. The hinges are mounted on the two lower cells MOLLE on the bottom edge of the vest Adjustment in size with six metal buckles sewn on each side of the dorsal panel. Height adjustment is by two metal buckles along the bottom edge of the Basque Possible self-adjustment by the user directly into wearing the vest The superfluous ends of the adjusting sling to hide under the ring of elastic tape. Allowed circumcision of excess length, provided the melting slices In the upper back has an eyelet for the evacuation of a wounded soldier In the old version of the vest on the yoke and back panel of an odd number of cells (5 pieces), on a new version - even (6 pieces) One size, adjustable size, from 46 to 68, adjustable height from 164 cm to 200 cm The vest is compatible with a climbing harness Weight: 900 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer
Weight: 900 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading vest. Discontinued, replaced on a Modular Basis Main material: Cordura® 1060d Universal use due to modular gear machine gunners, snipers, machine gunners, grenadiers and Riflemen-techs, infantry and mountain areas The entire surface of the vest is covered with MOLLE cells, straps stitched completely together. Free choice of saturation depending on the task - you can mount pouches to the ALICE system, UniClick, PALS/MOLLE, MTS Plus, the pouches on MALICE clips, Speed Clips (BLACKHAWK!) On the shoulders of the insert of soft foam helping to distribute the load on your shoulders and suppress the impact when the stop butt On the belly from the inside two pockets for cards/documents from water-resistant fabric, closed with Velcro. Velcro closure for secure sewn along the entrance to the pocket, has a handy skill of opening lines for In the upper part of the shoulders sewn hard stops, prevents slipping gun belt The jacket fastens with a zipper large tractor type with excellent skill in the language of the castle. Top zipper covered with dirt protective strap Velcro strap has the skill of slings The kit includes removable hinges (6 pieces) for discharge of the suspension/pistol belt. The hinges are mounted on the two lower cells on the bottom edge of the vest Adjustment in size with six metal buckles sewn on each side of the dorsal panel. Height adjustment is by two metal buckles along the bottom edge of the Basque Possible self-adjustment by the user directly into wearing the vest The superfluous ends of the adjusting sling to hide under the ring of elastic tape. Allowed circumcision of excess length, provided the melting slices In the upper back has an eyelet for the evacuation of a wounded soldier In the old version of the vest on the yoke and back panel of an odd number of cells (5 pieces), on a new version - even (6 pieces) One size, adjustable size, from 46 to 68, adjustable height from 164 cm to 200 cm The vest is compatible with a climbing harness
Size: 11,5×6.5 cm Weight: 29 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUniversal pouch small button. Discontinued, replaced by under multitool or small. gas. cylinder Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height Small flat pouch, perfectly suitable for mounting on webbing equipment. Easy to carry small oblong objects (lighters, flint, folding , etcp.) Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Weight: 2 kg. All sizes: The actual diameter of the dome: 220 see Frame: steel. Material: Polyester 170Т packing weight kg: 2 kg packaging dimensions see: 132*10*6 The Woodland parasol Umbrella has a compact folding design.  Durable steel frame with coating, provides the mechanism for tilting the umbrella.  Fabric protects against rain and direct sunlight.  Umbrella is Packed in a case
Weight: 1.1 kg. All sizes: The actual diameter of the dome is 170 cm Frame: steel (arc 16 mm and 20 mm) Material: Polyester 170Т packing weight kg: 1.160 packaging dimensions see: 109*8*7 The Woodland parasol Umbrella has a compact folding design.  Durable steel frame with coating, provides the mechanism for tilting the umbrella.  Fabric protects against rain and direct sunlight. Umbrella is Packed in a case.
Weight: 4.2 kg Waterproof: 5000 mm water. PT. All sizes: 310*220 cm Height: 130 cm, inner tent 120 cm Warranty: 6 months. Frame: 8.5 mm HQ FiberGlass Floor material: 100% polyester, 75D/195T 7000 mm in St The material of the outer: 100% polyester 75D/190T PU 5000 mm in St Finishing seams: taped. packing weight kg: 4.8 packaging dimensions see: 60*20*20 Tourist trekking tent. Allows you to put three people inside. Has a hemispherical shape. The tent has two layers, each of which is made of waterproof material. All seams taped. Inside there are pockets which allow to place all the little things. Ventilation is provided by mosquito nets and the Windows. Features:  - Two-layer tent with two inputs: two Q - shaped entrance, dubbed mosquito net(more opportunities to improve the ventilation in rainy weather).- Mounting components (angular straps with the eyelets) inner tentand the tent was designed in bright colors, for the rapid detection in the grass.- Extra eyelets for Doug slings in a corner of the inner tent.- Pockets for small items, a hook for a lantern.- Extra pockets to clean outdoor canopy entrance.- Backstay with reflective insert.- Pockets for braces.- Convenient buckle to adjust the length of guy wire.- Two ventilation valve with protection from driving rain.- The external awning of tent is resistant to UV radiation.- Big, roomy vestibule.- All seams taped.- Ideal for Hiking in spring, summer and autumn.
Weight: 3.8 kg, in bag 4.3 kg. Waterproof: 5000 mm water. PT. All sizes: 220*250 cm Height: 120 see Warranty: 6 months. Frame: 8.5 mm HQ FiberGlass Material of inner: tent: 100% breathable polyester Floor material: 100% polyester, 75D/195T 7000 mm in St The material of the outer: 100% polyester 75D/190T PU 5000 mm in St Finishing seams: taped. packing weight kg: 4.1 packaging dimensions see: 59*19*19 Tourist trekking tent. Allows you to place inside two people. Has a hemispherical shape. The tent has two layers, each of which is made of waterproof material. All seams taped. Inside there are pockets which allow to place all the little things. Ventilation is provided by mosquito