Products from ecwcs category

58 products, 30 reviews, 23 videos
Compare (0)
Sorting:
Number:
Height
Size
Бренд
Color
The type of camouflage
Material
The type of clothing
Office
Time of year
Appointment
Type of thermal underwear
Утеплитель/подкладка
Цена
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro closure; - lateral portions of the belt strapped with an elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Fleece jacket, which is an improvement variant of the third layer of the multilayered American system ECWCS last generation, made of the same materials Polartec®. Used as an intermediate insulation, and also as outer wear (in no wind) Very high (10 cm) collar Central zipper one-way zipper SBS, covered inside the entire length windproof bar Raglan sleeve – shoulders have no seams, are not restrained freedom of movement of hands Panels of Polartec® Power Grid™ armpits and on the sides of the torso – improved microclimate, better than the sweat is given, increasing the freedom of movement hands Gain from Paltex STW 686 on the collar (adds wind protection and maintains shape), shoulders and elbows (from rubbing) Soft elastic cuffs made of Polartec® Power Grid™ Four pockets with zip SBS. Two lower side hand warming, one external chest type "Napoleon", one similar internal vertical zipper. Burlap pockets is made from lightweight mesh for reduced weight and better ventilation Utyazhka on the bottom edge an elastic cord, the excess ends of the cord are derived in hand pockets Rear jacket lengthened The tabs on all zippers convenient manners All major seams – flat Material: Main fabric: Polartec® High Loft™ A little stretchy fleece with a characteristic "shaggy" pile and tenuous tissue. Thanks to it has the best insulation ratio of high to low weight, breathes beautifully and is Packed in a small volume. Side effect is a mild ventilation, so in windy weather it is recommended to wear the top under a windproof, soft-shell or membrane layer Auxiliary fabric: Polartec® Power Grid™ Very flexible (in both directions) fabric, smooth outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. Usually used on the warm underwear Reinforcing fabric: Paltex STW 686 Rememberany non-insulated soft-shell, elastic (in two directions) fine fabric with high abrasion resistance and having windproof properties. Due to the elasticity, the reinforcing plates do not restrict movement Product weight: 44-46/170-176 p-p – 491 g 48-50/170-176 p-p – 511 g 52-54/182-188 p-p – 559 g 56-58/182-188 R-R – 567 g REVIEWS: Review on www.gearshout.net The review on the website "Russel" Review from Green7-62 and Olga YOU MAY BE INTERESTED IN:
Fleece jacket, which is an improvement variant of the third layer of the multilayered American system ECWCS last generation, made of the same materials Polartec®. Used as an intermediate insulation, and also as outer wear (in no wind) Very high (10 cm) collar Central zipper one-way zipper SBS, covered inside the entire length windproof bar Raglan sleeve – shoulders have no seams, are not restrained freedom of movement of hands Panels of Polartec® Power Grid™ armpits and on the sides of the torso – improved microclimate, better than the sweat is given, increasing the freedom of movement hands Gain from Paltex STW 686 on the collar (adds wind protection and maintains shape), shoulders and elbows (from rubbing) Soft elastic cuffs made of Polartec® Power Grid™ Four pockets with zip SBS. Two lower side hand warming, one external chest type "Napoleon", one similar internal vertical zipper. Burlap pockets is made from lightweight mesh for reduced weight and better ventilation Utyazhka on the bottom edge an elastic cord, the excess ends of the cord are derived in hand pockets Rear jacket lengthened The tabs on all zippers convenient manners All major seams – flat Material: Main fabric: Polartec® High Loft™ A little stretchy fleece with a characteristic "shaggy" pile and tenuous tissue. Thanks to it has the best insulation ratio of high to low weight, breathes beautifully and is Packed in a small volume. Side effect is a mild ventilation, so in windy weather it is recommended to wear the top under a windproof, soft-shell or membrane layer Auxiliary fabric: Polartec® Power Grid™ Very flexible (in both directions) fabric, smooth outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. Usually used on the warm underwear Reinforcing fabric: Paltex STW 686 Rememberany non-insulated soft-shell, elastic (in two directions) fine fabric with high abrasion resistance and having windproof properties. Due to the elasticity, the reinforcing plates do not restrict movement Product weight: 44-46/170-176 p-p – 491 g 48-50/170-176 p-p – 511 g 52-54/182-188 p-p – 559 g 56-58/182-188 R-R – 567 g REVIEWS: Review on www.gearshout.net The review on the website "Russel" Review from Green7-62 and Olga YOU MAY BE INTERESTED IN:
Field-season (for cool weather) for armed professionals, provides protection from wind and light precipitation. Ideal for outdoor. Is analogous to the layer 5 of the American military multilayer clothing systems ECWCS/PCU (non-insulated Softshell) Lightweight but durable fabric (100% polyester) with tight stitching, has a windproof properties. Thanks to DWR impregnation protects against light rain (heavy rain get wet). Mosquitoes don't bite wound. Dries quickly. Similar fabric used in the anorak Panzer Super Light All seams are lapped (tissue sections hidden in the seam, overlock fundamentally not used) for greater strength The locks on all zips long the habits of the braid. Manners of a flat and soft, no pressure when worn over the outfit The hood retracts into the collar, a pocket closed by two-way zipper, placket protected. Special tightening around the face and the shape of the hood does not disturb the peripheral vision, the free ends of the cord are led to the collar and then into the breast pockets of the jacket. Additional horizontal tightening the elastic cord (adjusts at the back). Hood sewn into the top edge of the collar, so it fits the head as well as the hoods which is a continuation of the collar High collar, wide width counting on putting on top of fleece at the collar tucked away in the hood Central zipper two-way (you can unbutton from the bottom), inside out along the entire length covered by a windproof bar. On the collar strap continues outside, protecting the neck and chin from chafing The sleeves are articulated in the region of the elbows. Fit provides unrestricted movement hands up, don't ride up Simple cuff on the wide rubber bands The jacket is elongated at the rear to protect lower back. Utyazhka on the bottom using clamps located near the main zipper. The free ends of the cord are excreted in the breast pockets of the jacket Loaded with places enhanced tack-zigzag Pockets: on the shoulders of bulky pockets with vertical zippers that are protected by strap on the wrong side mesh pocket with zipper for documents chest pockets with vertical zippers on the sides of the chest, zipper is protected by a strap. This arrangement provides access to the pockets when worn over a breastplate or bulletproof vest, and do not interfere with the use of pistol belts, CPF, knapsack belts and other gear (below the waist no pockets). Burlap pockets made of light mesh, but the area of the bottom zipper and reinforced main fabric. Openings for the free ends of the cord tightening the hood can be used for threading the wires of headphones or earphones, so they quietly removed from the pockets under the collar REVIEWS: The review on the website "Russel" Forum discussion YOU MAY BE INTERESTED IN:
Fleece jacket, which is an improvement variant of the third layer of the multilayered American system ECWCS last generation, made of the same materials Polartec®. Used as an intermediate insulation, as well as external (in no wind) Very high (10 cm) collar Central zipper one-way zipper SBS, covered inside the entire length windproof bar Raglan sleeve – shoulders have no seams, are not restrained freedom of movement of hands Panels of Polartec® Power Grid™ armpits and on the sides of the torso – improved microclimate, better than the sweat is given, increasing the freedom of movement hands Gain from Paltex STW 686 on the collar (adds wind protection and maintains shape), shoulders and elbows (from rubbing) Soft elastic cuffs made of Polartec® Power Grid™ Four pockets with zip SBS. Two lower side hand warming, one external chest type "Napoleon", one similar internal vertical zipper. Burlap pockets is made from lightweight mesh for reduced weight and better ventilation Utyazhka on the bottom edge an elastic cord, the excess ends of the cord are derived in hand pockets The back is elongated The tabs on all zippers convenient manners All major seams – flat Material: Main fabric: Polartec® High Loft™ A little stretchy fleece with a characteristic "shaggy" pile and tenuous tissue. Thanks to it has the best insulation ratio of high to low weight, breathes beautifully and is Packed in a small volume. Side effect is a mild ventilation, so in windy weather it is recommended to wear the top under a windproof, soft-shell or membrane layer Auxiliary fabric: Polartec® Power Grid™ Very flexible (in both directions) fabric, smooth outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. Usually used on the warm underwear Reinforcing fabric: Paltex STW 686 Rememberany non-insulated soft-shell, elastic (in two directions) fine fabric with high abrasion resistance and having windproof properties. Due to the elasticity, the reinforcing plates do not restrict movement Product weight: 44-46/170-176 p-p – 491 g 48-50/170-176 p-p – 511 g 52-54/182-188 p-p – 559 g 56-58/182-188 R-R – 567 g REVIEWS: Review on www.gearshout.net The review on the website "Russel" Review from Green7-62 and Olga YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit The codpiece is cut, designed for the male figure Gusset (insert in the crotch) for a better fit and freedom of movement Belt made of elastic bands-width 4 cm, sewn flat seam to the edge of the fabric (no excessive thickness and insulation). The belt is at the optimum height, are rather high, but not slipping and not bent when bending Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 220 g 48-50/170-176 R-R – 234 g 52-54/182-188 R-R – 258 g 56-58/182-188 R-R – 299 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit The codpiece is cut, designed for the male figure Gusset (insert in the crotch) for a better fit and freedom of movement Belt made of elastic bands-width 4 cm, sewn flat seam to the edge of the fabric (no excessive thickness and insulation). The belt is at the optimum height, are rather high, but not slipping and not bent when bending Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 220 g 48-50/170-176 R-R – 234 g 52-54/182-188 R-R – 258 g 56-58/182-188 R-R – 299 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit Raglan sleeve – shoulders top no rubbing under the straps seams Armpits are inset gussets for a better fit and increased freedom of movement hands Cuffs elongated, with slits for the thumb. Very convenient when putting on top of other insulating layers and when using with gloves High collar zipped optimal length, zipper and her castle is covered by a placket for warmth and to protect the neck and chin from chafing A slightly longer back to protect waist. There is the common stock over the length of the torso, so the sweater should not be excessive work Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 292 g 48-50/170-176 R-R – 318 g 52-54/182-188 R-R – 322 g 56-58/182-188 R-R – 351 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Field-season (for cool weather) for armed professionals, provides protection from wind and light precipitation. Ideal for outdoor. Is analogous to the layer 5 of the American military multilayer clothing systems ECWCS/PCU (non-insulated Softshell) Lightweight but durable fabric (100% polyester) with tight stitching, has a windproof properties. Thanks to DWR impregnation protects against light rain (heavy rain get wet). Mosquitoes don't bite wound. Dries quickly. Similar fabric used in the anorak Panzer Super Light All seams are lapped (tissue sections hidden in the seam, overlock fundamentally not used) for greater strength The locks on all zips long the habits of the braid. Manners of a flat and soft, no pressure when worn over the outfit The hood retracts into the collar, a pocket closed by two-way zipper, placket protected. Special tightening around the face and the shape of the hood does not disturb the peripheral vision, the free ends of the cord are led to the collar and then into the breast pockets of the jacket. Additional horizontal tightening the elastic cord (adjusts at the back). Hood sewn into the top edge of the collar, so it fits the head as well as the hoods which is a continuation of the collar High collar, wide width counting on putting on top of fleece at the collar tucked away in the hood Central zipper two-way (you can unbutton from the bottom), inside out along the entire length covered by a windproof bar. On the collar strap continues outside, protecting the neck and chin from chafing The sleeves are articulated in the region of the elbows. Fit provides unrestricted movement hands up, don't ride up Simple cuff on the wide rubber bands The jacket is elongated at the rear to protect lower back. Utyazhka on the bottom using clamps located near the main zipper. The free ends of the cord are excreted in the breast pockets of the jacket Loaded with places enhanced tack-zigzag Pockets: on the shoulders of bulky pockets with vertical zippers that are protected by strap on the wrong side mesh pocket with zipper for documents chest pockets with vertical zippers on the sides of the chest, zipper is protected by a strap. This arrangement provides access to the pockets when worn over a breastplate or bulletproof vest, and do not interfere with the use of pistol belts, CPF, knapsack belts and other gear (below the waist no pockets). Burlap pockets made of light mesh, but the area of the bottom zipper and reinforced main fabric. Openings for the free ends of the cord tightening the hood can be used for threading the wires of headphones or earphones, so they quietly removed from the pockets under the collar REVIEWS: The review on the website "Russel" Forum discussion YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit Raglan sleeve – shoulders top no rubbing under the straps seams Armpits are inset gussets for a better fit and increased freedom of movement hands Cuffs elongated, with slits for the thumb. Very convenient when putting on top of other insulating layers and when using with gloves High collar zipped optimal length, zipper and her castle is covered by a placket for warmth and to protect the neck and chin from chafing A slightly longer back to protect waist. There is the common stock over the length of the torso, so the sweater should not be excessive work Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 292 g 48-50/170-176 R-R – 318 g 52-54/182-188 R-R – 322 g 56-58/182-188 R-R – 351 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit Raglan sleeve – shoulders top no rubbing under the straps seams Armpits are inset gussets for a better fit and increased freedom of movement hands Cuffs elongated, with slits for the thumb. Very convenient when putting on top of other insulating layers and when using with gloves High collar zipped optimal length, zipper and her castle is covered by a placket for warmth and to protect the neck and chin from chafing A slightly longer back to protect waist. There is the common stock over the length of the torso, so the sweater should not be excessive work Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 292 g 48-50/170-176 R-R – 318 g 52-54/182-188 R-R – 322 g 56-58/182-188 R-R – 351 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit The codpiece is cut, designed for the male figure Gusset (insert in the crotch) for a better fit and freedom of movement Belt made of elastic bands-width 4 cm, sewn flat seam to the edge of the fabric (no excessive thickness and insulation). The belt is at the optimum height, are rather high, but not slipping and not bent when bending Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 220 g 48-50/170-176 R-R – 234 g 52-54/182-188 R-R – 258 g 56-58/182-188 R-R – 299 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit Raglan sleeve – shoulders top no rubbing under the straps seams Armpits are inset gussets for a better fit and increased freedom of movement hands Cuffs elongated, with slits for the thumb. Very convenient when putting on top of other insulating layers and when using with gloves High collar zipped optimal length, zipper and her castle is covered by a placket for warmth and to protect the neck and chin from chafing A slightly longer back to protect waist. There is the common stock over the length of the torso, so the sweater should not be excessive work Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 292 g 48-50/170-176 R-R – 318 g 52-54/182-188 R-R – 322 g 56-58/182-188 R-R – 351 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit Raglan sleeve – shoulders top no rubbing under the straps seams Armpits are inset gussets for a better fit and increased freedom of movement hands Cuffs elongated, with slits for the thumb. Very convenient when putting on top of other insulating layers and when using with gloves High collar zipped optimal length, zipper and her castle is covered by a placket for warmth and to protect the neck and chin from chafing A slightly longer back to protect waist. There is the common stock over the length of the torso, so the sweater should not be excessive work Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 292 g 48-50/170-176 R-R – 318 g 52-54/182-188 R-R – 322 g 56-58/182-188 R-R – 351 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit The codpiece is cut, designed for the male figure Gusset (insert in the crotch) for a better fit and freedom of movement Belt made of elastic bands-width 4 cm, sewn flat seam to the edge of the fabric (no excessive thickness and insulation). The belt is at the optimum height, are rather high, but not slipping and not bent when bending Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 220 g 48-50/170-176 R-R – 234 g 52-54/182-188 R-R – 258 g 56-58/182-188 R-R – 299 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Warm thermal underwear, which is an advanced analogue of the second layer of the multilayered American system of the last generation, made of the same material Polartec® Power Grid™. Worn over thin thermal underwear or directly on bare skin. Perfectly located both for tourists and armed professionals All seams are flat Form-fitting anatomical fit The codpiece is cut, designed for the male figure Gusset (insert in the crotch) for a better fit and freedom of movement Belt made of elastic bands-width 4 cm, sewn flat seam to the edge of the fabric (no excessive thickness and insulation). The belt is at the optimum height, are rather high, but not slipping and not bent when bending Material: Polartec® Power Grid™ High Warmth Grid w/Stretch - very stretchy (in two directions) sheet, smooth on the outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. In comparison with classical analogues, like Polartec® Power Stretch® Pro™ has less weight, better breathing and external moisture due to the special structure. This fabric has the highest in its class the ratio of the insulation-to-weight ratio. Fabric made in USA The density of the material 225 g/m2 Product weight: 44-46/170-176 R-R – 220 g 48-50/170-176 R-R – 234 g 52-54/182-188 R-R – 258 g 56-58/182-188 R-R – 299 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Fleece jacket, which is an improvement variant of the third layer of the multilayered American system ECWCS last generation, made of the same materials Polartec®. Used as an intermediate insulation, as well as external (in no wind) Very high (10 cm) collar Central zipper one-way zipper SBS, covered inside the entire length windproof bar Raglan sleeve – shoulders have no seams, are not restrained freedom of movement of hands Panels of Polartec® Power Grid™ armpits and on the sides of the torso – improved microclimate, better than the sweat is given, increasing the freedom of movement hands Gain from Paltex STW 686 on the collar (adds wind protection and maintains shape), shoulders and elbows (from rubbing) Soft elastic cuffs made of Polartec® Power Grid™ Four pockets with zip SBS. Two lower side hand warming, one external chest type "Napoleon", one similar internal vertical zipper. Burlap pockets is made from lightweight mesh for reduced weight and better ventilation Utyazhka on the bottom edge an elastic cord, the excess ends of the cord are derived in hand pockets The back is elongated The tabs on all zippers convenient manners All major seams – flat Material: Main fabric: Polartec® High Loft™ A little stretchy fleece with a characteristic "shaggy" pile and tenuous tissue. Thanks to it has the best insulation ratio of high to low weight, breathes beautifully and is Packed in a small volume. Side effect is a mild ventilation, so in windy weather it is recommended to wear the top under a windproof, soft-shell or membrane layer Auxiliary fabric: Polartec® Power Grid™ Very flexible (in both directions) fabric, smooth outside and a thin fleece on the reverse side. Fleece layer thinned channels that improve ventilation, which has a specific "waffle" look. Usually used on the warm underwear Reinforcing fabric: Paltex STW 686 Rememberany non-insulated soft-shell, elastic (in two directions) fine fabric with high abrasion resistance and having windproof properties. Due to the elasticity, the reinforcing plates do not restrict movement Product weight: 44-46/170-176 p-p – 491 g 48-50/170-176 p-p – 511 g 52-54/182-188 p-p – 559 g 56-58/182-188 R-R – 567 g REVIEWS: Review on www.gearshout.net The review on the website "Russel" Review from Green7-62 and Olga YOU MAY BE INTERESTED IN:
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
90% Nylon 10% Spandex tensile strength: 1212Н tensile strength in weft (width of fabric) - 192Н resistance to abrasion: more than 20000 cycles Tight elastic fabric with windproof, breathable. Provides serious protection from rain. Is the so-called "non-insulated Softshell", compared with the conventional Softshell is not on the wrong side of the fleece. This type of fabric is used in the U.S. military multilayer systems (ECWCS, PCU) on the fifth layer Used Alloy on the jacket and trousers Ramble Ramble, as the gain on the Tactical High Loft jacket and other products Recommended for sewing demi-season tourist costumes. Can be used as the gain on fleece jackets
Outer fabric: 50% nylon 50% cotton Lining: 100% polyester Hybrid jackets M-65 and the ECWCS Upper material windproof waterproof NYCO Removable fleece liner Adjustable volume hood Two patch outer pockets A card pocket on the sleeve Adjustable cuffs Made by ALPHA Industries
Outer fabric: 50% nylon 50% cotton Lining: 100% polyester Hybrid jackets M-65 and the ECWCS Upper material windproof waterproof NYCO Removable fleece liner Adjustable volume hood Two patch outer pockets A card pocket on the sleeve Adjustable cuffs Made by ALPHA Industries
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Extended Cold Weather Clothing System
Since 1985 in the U.S. army all-season there are universal sets of clothes, the name of which is abbreviated ECWCS, or Extended Cold Weather Clothing System extended system of equipment for cold weather . It is in the process of developing the components of this kit, the U.S. military began to use new high-tech materials in creating clothing and gear, such as GoreTex and Polartec, Primaloft and others. Will try to tell in detail, what is the ECWCS and how it works. ECWCS is all-weather system, which includes several levels of clothing, designed so that people could protect themselves from aggressive weather phenomena in a wide range of temperatures from 5 to -40 degrees . Simply put, having at its disposal the full set of ECWCS items, You can combine those that are necessary for the climate in which You are. Initially, in the 80s, army ECWCS set consisted of 5 layers, and it had things standing in service with the U.S. army and previously. But in the process of evolution ECWCS, the number of constituent layers is increased to 7 and they all received narrow specialization. Today there are 3 generations of ECWCS. Abbreviated, they are called GEN from the English.Generation . Each generation is an improved version of the previous one. In this review, we will discuss a set of GEN III ECWCS Extended Climate Warfighter Clothing System Generation III . All-weather complex Extended Cold Weather Clothing System , is read as Ek-wax, is designed to protect soldiers the U.S. army from the negative factors of climate in the most hostile corners of the globe at temperatures down to -40. The starting point for the development of the third generation ECWCS - GenIII, known as the Extended Climate Warfighter Clothing System, was the beginning of hostilities in Afghanistan in 2001. The climate in this country in different areas and at different altitudes can be very fickle. Geographical position and topography of this country unleashes on the resident all kinds of adversity piercing cold wind and snow in the mountains, sandstorms in desert regions, heat, rainfall and high humidity in the plains. From humid or hot in the plains can turn to cold and windy in the mountains. In such circumstances there is an urgent need in the clothing system, consisting not just of layers . It was necessary to create a universal tool , all the elements which would give people the ability to quickly adapt to the change of weather and feel comfortable in all conditions. Thus, this designer should have the least possible weight and to occupy as little space as possible. Such a system was the set of uniform ECWCS GEN III, which appeared in 2003. Since 2004 ECWCS GEN III used 10 mountain division and 82nd airborne division, among the first to receive air defense units located in Alaska. In the fall, winter and summer 2006-2007 kits GEN III ECWCS were battle-tested in Afghanistan, and later they also began to supply the parts located in South Korea, Bosnia and Kosovo. The system of the third generation ECWCS has 25 less weight and requires 33 less space than kits previous generation. The full set consists of 7 layers and includes 12 items. In English, layer layer , so all layers are numbered and marked on the labels L1, L2 and T.D. In speaking of the L before the number of the layer transformed into Level , so layers are often referred to as level 4, level 6 and soD. Together, these things effectively wick moisture away from the body, retain heat and prevent the penetration of cold and moisture into and fully perform the function of camouflage in the landscape. But in this case, each element of the set ECWCS GEN III can run separately as a standalone thing. More layers of clothing, compared to the previous ECWCS kits, helps to accurately regulate the microclimate, as motion and in static condition. Functionally, the layers can be divided as follows 1.Underwear wicking underwear 1 and 2 layers L1 and L2 . 2.Heat retention warm layers 3, 2, and 7 layer L2, L3 and L7 . 3.Protective functions outer layers 3,4,5,6 and 7 layers L3, L4, L5, L6, L7 ECWCS GenIII is unrivalled on the market a unified set of highly specialized components created from the best current materials . This constructor is from which is made the set for all possible conditions. Ease and a high degree of compression clothing allows you to always have at hand a tool for the opposition to vagaries of weather. Set GenIII ECWCS consists of 12 elements 2 keel, 3 sweaters, 4 jackets and 3 pants. All elements are divided into so-called layers. The layer consists of pants keel and jackets sweatshirts except for layers L3 and L4 . Layout layers are divided into body L1, L2 , universal L3, L5 and external L3, L4, L5, L6, L7 . Functional purpose are divided into wicking layers L1, L2 , warming L2, L3, L7 , base L5 and protective L3, L4, L5, L6, L7 . The principle of operation of the layers is
 
ECWCS
GEN III ECWCS - это последнее уже третье поколение всепогодного комплекса военной одежды армии США U.S. Army Extended Climate Warfighter Clothing System . ECWCS правильно произносить как ЭКВАКС. В современном мире бойцы могут оказаться в совершенно различных климатических условиях. Современный солдат должен быть технически подготовлен и правильно экипирован в соответсвии с окружающими условиями, это может быть и жара 50 и холод до -40 градусов Цельсия. Все чаще солдаты оказываются в условиях, когда днем стоит невыносимая жара, а ночью температура может опуститься до минусовых значений. Или длительный поход подразумевает пересечение знойной пустыни и покрытых снегом гор. Сейчас солдат должен быть готов к любым обстоятельствам и к быстрой смене климата. Эквакс третьего поколения это принципиально иной подход к одежде, а не простое усовершенствование второго поколения ECWCS. Новый комплекс одежды уже расчитан не только на холодную погоду, но на весь спектр климатических условий. GEN III ECWCS работает в любом климате Комплекс состоит из 7 слоев защиты, и обеспечивает полный спектр защиты от непредсказуемых условий окружающей среды. От -40 до 60 . На 25 легче, чем предыдущее поколение ECWCS. На 30 меньше объем, чем у предыдущего поколения. Четыре дополнительных уровня по сравнению с предыдущим поколением. Все семь уровней функционируют как единая динамическая система, где все слои взаимодействуют друг с другом. Улучшенная калибровка по размерам инновационный дизайн одежды с новой логикой размерности обеспечивает идеальное прилегание. Исключительно тихая одежда и незаметная в инфракрасной области спектра технология NIR . Полная интеграция с разгрузками и бронежилетами. Инновационные материалы, дизайн и конструкция. I слой. Влагоотводящий. Нательный. Легкая футболка и кальсоны. Базовый слой, нательный. Может использоваться сам по себе или в сочетании с другими слоями для дополнительной теплозащиты и для отвода влаги. Основная функция отвод влаги Материал Polartec Power Dry Silkweight. Характеризуется очень высокой воздухопроницаемостью, отводит влагу от кожи и быстро сохнет, обеспечивая испарительное охлаждение в теплую погоду и изоляционные свойства в прохладную погоду. Менше вес и объем, чем в предыдущих системах. 2 слой. Влагоотводящий и согревающий. Нательный. Средней плотности кофта и кальсоны. Базовый слой, нательный. Может использоваться сам по себе или в сочетании с другими слоями для дополнительной теплозащиты и для отвода влаги. Средней плотности рубашка и кальсоны обеспечивают отвод влаги в условиях с мягким климатом и служат в качестве базового слоя в холодном климате. Сетчатый материал Polartec Power Dry обеспечивает дополнительным теплом в более прохладных условиях, но по-прежнему отводит влагу и быстро сохнет. Материал - стретч для повышенного комфорта и легкого веса с меньшим объемом, чем в предыдущих системах. 3 слой. Согревающий и защитный. Универсальный и внешний. Ф лисовая куртка. Основной согревающий слой. Носится под верхними слоями или поверх второго слоя как верхняя одежда в прохладном климате. Флисовая куртка ECWCS GEN III High-Loft служит основным слоем изоляции для согревания в умеренных и холодных условиях. Материал - Polartec Thermal Pro - создает в ворсе воздушные пузыри , которые задерживают и сохраняют тепло тела, при этомкуртка очень легкая и имеет небольшой объем при транспортировке. Отличная воздухопроницаемостью, куртка быстро сохнет. Флисовая куртка третьего поколения ECWCS имеет меньший объем и повышенную прочностью по сравнению с предыдущими системами. 4 слой. Защитный. Внешний. Легкая куртка Ветровка . Защитный слой. Предназначен для ношения с базовыми слоями в переходных средах в целях обеспечения защиты от ветра и песка. Куртка-ветровка ECWCS Gen III предназначена для защиты от ветра, но при этом должна иметь низкий объем и вес. Она оптимизирует работу других изоляционных слоев. Она также подходит для ношения под бронежилет. Изготовлена из нейлона с влагонепроницаемыми свойствами. 5 слой. Защитный. Внешний и универсальный. Водоотталкивающие легкие куртка и брюки для защиты в прохладную
 
Военная униформа США ECWCS GEN III
В 1985 года в вооруженных силах США впервые задумались о единой концепции всепогодной униформы военнослужащих. Министерство обороны решило выдать госзаказ на разработку и создание такого комплекта униформы, который бы работал в диапазоне температур от 30 до -30 градусов. Так был создан комплект ECWCS Extended Cold Weather Clothing System или расширенная система экипировки для холодных погодных условий. В данной системе экипировки предусмотрено семь слоев одежды из различных высокотехнологичных материалов, предназначенных для разных погодных условий. Нужно заметить, что слоев не всегда было семь. Первоначальная версия системы подразумевала всего пять слоев или уровней одежды. Но с 1985 года система несколько раз модифицировалась и улучшалась. Приписка Gen Generation и последующая римская цифра обозначают порядковый номер поколения экипировки. Сегодня мы разберем самое последнее и на данный момент совершенное третье поколение. Для начала рассмотрим историю и причины создания этой военной формы. Система экипировки GEN III была разработана и принята на вооружение в середине 2000-х годов. Толчком к разработке стали боевые действия в Афганистане, где климат крайне специфичен там может быть очень жарко на равнине и очень холодно в горных районах. Эти условия в совокупности с общей сменой расцветки камуфляжа армии США послужили стимулом к разработке качественно нового типа одежды. Для изготовления униформы третьего поколения стали применять более совершенные материалы, такие как Primaloft, Polartec и новый облегченный мембранный материал. Разработчикам удалось сделать военную форму ее более легкой, компактной и эффективной. С 2004 года данную систему активно применяли 10ая горная и 82ая воздушно-десантная дивизии. Также, в связи с тяжелыми погодными условиями, одними из первых ее получили части, дислоцирующиеся на Аляске. Таким образом, данная система прошла проверку в боевых условиях Афганистана и в условиях крайнего севера на Аляске. И нужно сказать, что она отлично справилась с поставленными задачами. Система экипировки ECWCS третьего поколения имеет в своем составе семь слоев или уровней одежды. 1-й слой отвечает за отведение излишней влаги от тела, 2, 3 и 7 за сохранение тепла и обогрев, 4, 5, 6 за защиту от ветра и дождя. Сейчас мы рассмотрим каждый слой более подробно и расскажем про области их применения. Level 1 Первый слой Level 1 униформы GEN III является влагоотводящим нательным бельем, изготавливается преимущественно из полиэстера. Очень быстро сохнет за счет синтетического состава. В жару и холод обеспечивает нормальный отвод влаги от тела и циркуляцию воздуха. Является базовым и носится под все слои. Производится в расцветках khaki, coyote и black. Level 2 2 слой Level 2 военной униформы GEN III это начальный согревающий уровень, идет в дополнение к первому слою и выполняет функцию термобелья. Его можно применять отдельно от первого слоя, но эффективность будет заметно ниже. Изготовлен из тонкого флиса, имеющего вафельную структуру. Контрактные образцы производятся в расцветках khaki, coyote. На рисунке представлена коммерческая версия от фирмы MFH в цвете oliv. Level 3 3 слой Level 3 военной униформы GEN III представляет собой свитер на молнии с высоким горлом, изготовленный из материала Polartec. Состав -100 Полиэстер, ворсованная структура способствует отличному сохранению тепла. Данный свитер отлично согревает и является базовым утеплителем для других слоев. Его можно также успешно применять отдельно от всех слоев, и он не потеряет своих согревающих свойств. Изготавливается в расцветках foliage, black, coyote. Level 4 4 слой Level 4 военной униформы GEN III является самым первым узкоспециализированным защитным уровнем. Представляет собой легкую ветровку из нейлона. Может применяться как самостоятельно, так и отдельно с каждым вышеописанным слоем. Обеспечивает хорошую защиту от ветра. Занимает мало места в сложенном виде и мало весит. Производится в камуфляжах multicam и UCP. Level 5 5 слой Level 5 военной униформы GEN III состоит из куртки и брюк. Защищает не только от ветра, но и от не сильного дождя. Применяется, когда 4-й слой становится малоэффективным. Также можно носить его с 1, 2 и 3 слоями. Производится в камуфляжах multicam и UCP. Level 6 6 слой Level 6 военной униформы GEN III защищает от сильного дождя. Выполнен из PTFE мембраны фирмы Gore-Tex. Применяется при неэффективной работе 4 и 5 слоев. Отлично сочетается с 1, 2 и 3 слоями. Производится в расцветке UCP и multicam. Level 7 Последний утепляющий 7 слой применяется при минусовых температурах. Верхний слой изготавливается из нейлона, в качестве утеплителя использован primaloft синтетический аналог
 
Ask a question