The suit includes pants and. straight silhouette with Central concealed side zip on 5 loops and 5 buttons"Canada" and the top and bottom through a loop and button. Before severgnini overhead obyasneniyami with flaps,fastened with the Velcro fastener. At the bottom of a stitched belt. The practical design features. At the bottom of the back above knee black belt . The belt is adjustable in the back sirinapa with the help of satanika and semirings. Set-in sleeves double-seam smangele, with reinforcing pads with tucks at the elbow and the inlet on the bottom edge, fastened with the Velcro fastener.Optionally, elbow pads inserted additional padding.On the sleeves five pockets with a side entrance. On bottom of sleeves stalemates curly shape, cap with cuffs, fastened with a loop and two "Canada". Gussets for ventilation made from knitted fabric (mesh). The seams connecting the sleeves with the armhole at the shoulder vacany with the trim ring, snap-on button "NATO". Set turn-down collar with a stitched stand, with patau on the left end of the collar, fastened with a loop and two (working and non-working position). The upper inner part of the closed closure. The left side of the lining is a pocket for documents of vodonepronitsaema fabric, fastened with a button. with a stitched belt, fastened with sewn loop and button and Trouser hook, with five belt loops: on pridniprovska two and three on the hind halves. The lateral portion of the belt tight elastic band. The codpiece of trousers with a zipper closure. Under the lower edge of the belt loops on the right half of pants TACAN holder with the semicircle.The front halves of trousers with soft pleats, side pockets with decorative inserts. In the knee nastrochennogo gusset plate with tucks.The side seams are located on the overhead volume pockets with flaps. Valves pockets fastened with the Velcro fastener. Over bulky pockets on the front halves scribbled small volume pockets with valves for textile fastener. On the back of polovynchyk are flap pockets on a textile fastener. Overlay-amplifier in the seat part forms a burlap pockets.In the hemming bottom of pants for walking the seam vacany of stripti to fix the trousers to boots.In addition to the turnup of the inserted bottom twill tape for width adjustment. Fabric: Mirage-210, PE-67%, CL-33%
The costume consists of a jacket and trousers.
The jacket is straight cut.
Turndown collar with a detachable stand and patoy button.
Central zip concealed (supat) button - "Canada" attached braid, closed strap textile clasp
In the shoulder seams are belt loops for attachment of shoulder straps on the textile clasps and buttons.
Two chest pockets waybills volume with the unattached edges of the valves for textile fastener.
At the bottom of the jacket cutting zone button zone volume is regulated by zastepowane with semirings.
In the elbow pads-amplifiers with input protectors on textile fasteners.
On the bottom of the sleeve cuff opening with two buttons "Canada"
In the area of the armhole mesh for ventilation.
Pants straight cut.
Detachable belt with five belt loops.
Volume the waistband is adjustable by side panels with elastic braid.
Zip and button at the waist.
Scoring two side pockets with lining – amplifiers at the input.
Two overhead volume pockets with valves for textile fastener.
Two large patch pockets with pleats for volume with the valves for textile fastener in the region of the side seams.
The knee pads-amplifiers with tucks.
In the upper part of the rear halves of trousers two scoring pockets, under the right Pat of the belt tape. Overlay-amplifier in the seat.
On the bottom of the pants stropki of elastic tape.To the belt loops of the trousers are fastened with straps of elastic tape.
Fabric: the Mirage-210, PE-67%, CL-33%
Star small FSSP.
Insignia on shoulder boards for rank "a lawyer, a reviewer of the state civil service of the Russian Federation" the Federal bailiff service.
standard (135х90) souvenir table (at the front)
Cover for car documents of high quality leather "nappa" with the use of the Golden termodonte will provide reliable protection and worthy of framing Your official identification and other important documents Comes with chain with ring and carabiner, which significantly reduces the risk of loss of the document The emblem is made of a material Tombac (FR. tombac, from Malay. tambaga copper) — a kind of brass. The material has high corrosion resistance, high ductility and is traditionally used in the manufacture of artistic products, badges and special accessories The final processing of the emblems are held by highly skilled engravers manually The logo is subjected to artificial aging The color is applied by enamel The finished product is covered with varnish
Insignia on shoulder boards for rank of "Counselor of justice, counselor of the state civil service of the Russian Federation" the Federal bailiff service.
Insignia on shoulder boards for rank of "Secretary of the state civil service of the Russian Federation" the Federal bailiff service.