Duraflex

Duraflex

195 products, 3 reviews

High quality plastic accessories of production of one of the world leaders National Molding Corporation, USA.

made of highly durable polyamide 6 stamps.6 DuPont. Accessories perfectly proved itself in operation at all temperatures and high loads.

Used in backpacks, tents and sleeping bags.

No products to compare
Sorting:
Number:
Бренд: Duraflex
Color
System
Material
Appointment
Type of equipment
Цена
Material: Nylon A buckle for fastening chest straps ties, with the ability to adjust the vertical position. Consists of a two-slit buckle with slots for putting in/dismantling on 25 mm vertical line running along the straps, combined with located on the side of odnomernoi buckle for 20 mm webbing horizontal rib tie
Material: Acetal, thermoplastic polyurethane Fastex from the Stealth®, the parent part is installed on the surface of the material by welding, the father's part is a standard adjustable
Material: Acetal, thermoplastic polyurethane Fastex from the Stealth®, the parent part is installed on the surface of the material by welding, the father's part is a standard adjustable
Material: Acetal Spanish buckle, works silently, almost impossible to bring down. Used Alloy on the pouches
Material: Acetal Trendeleva buckle with one split gap on the hinge side of the lines on which the buckle is usually attached. Used Alloy in Suspenders universal. It is recommended to use as an easily installed temporary replacement for a broken trendeleva or for various mountings
Material: Nylon A buckle for fastening chest straps ties, with the ability to adjust the vertical position. Consists of a two-slit buckle with slots for putting in/dismantling on 25 mm vertical line running along the straps, combined with located on the side of odnomernoi buckle for 20 mm webbing horizontal rib tie
Material: Acetal Fastex the military sample, the parent part is installed on the surface of the material, his father's part is a standard adjustable. Used Alloy on the pouches The maternal part consists of and the substrate. To install the buckle should be punched in the material three holes. In these openings are inserted the tabs on the back side of the buckle. From the inside of the material on the protrusions is put on a special substrate, is shifted in the direction along the buckle until the tabs clicks into the respective recesses The gap between the buckle and the substrate is calculated for some finite thickness of material, therefore when installing on thin materials it is recommended to add from the bottom-side reinforcing layer to increase the thickness
Material: Acetal Extra strong thickened without adjustment from the series Stealth™. It is recommended to use in the belts of the backpacks
Material: Nylon Reinforced two-slit buckle. Used Alloy on unloading platforms and pouches Attention! This model of buckle used by the company 5.11 in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the color Sandstone
Material: Acetal Two-slit single buckle with separable slit. Used Alloy in Suspenders universal. It is recommended to use for the different mounts
Material: Nylon Standard otnoshenia buckle
Material: Nylon Trendeleva buckle military pattern from the Mojave®. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped). Used Alloy on unloading platforms and pouches
Material: Acetal Lightweight trendeleva buckle from the NuLite®. The Alloy used in a series of ultralight backpacks
Official website Duraflex Description in English
Material: Acetal for 10 mm, 12 mm The standard semiring
Material: Acetal Large clamp for the cord in diameter of 4-5 mm (e.g., 550). Has an oval hole in the calculation under the two cords, but you can thread one. The side buckle has a holder for attaching the retainer to the loop of the braid. Used Alloy on the pouches Attention! This model of lock is used by Maxpedition in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig Maxpedition Khaki in colour
Material: Acetal Extra strong thickened trendeleva buckle special modifications, unlike standard trendeleva can freely rotate around a loop of webbing to which the buckle is sewn. Thus, the adjustable sling is much easier to loosen under heavy load. This model is designed for the adjustment of belts of backpacks and is protected against accidental loosening of the belt. For this purpose the end of the buckle serving upon those to catch the fingers when loosening these straps, made as curved in the direction of the lines, and it's harder to catch
Material: Acetal Specific plastic reinforced semi-circle, stitched on the strap, designed for mounting carabiner hook
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon The clip for the cord. Very simple and reliable buckle in the form of parts with a slot and wedge, two cords are clamped on the sides of the wedge, the side surface of the wedge is fluted for better grip. The wedge has growths at the ends to prevent from the cracks. Model with large wedge
Material: Nylon The clip for the cord. Very simple and reliable buckle in the form of parts with a slot and wedge, two cords are clamped on the sides of the wedge, the side surface of the wedge is fluted for better grip. The wedge has growths at the ends to prevent from the cracks. The model with the small wedge
Material: Nylon Reinforced two-slit buckle. Used Alloy on unloading platforms and pouches Attention! This model of buckle used by the company 5.11 in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the color Sandstone
Material: Nylon The semicircle increased for military use. Used Alloy on unloading platforms and pouches
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Buckle, one side is the slot for attaching to a sling 10 mm, the second double hook for the cord. We recommend that you use contractions backpacks elastic cord
Material: Acetal Two-slit single buckle with separable slit. Used Alloy in Suspenders universal. It is recommended to use for the different mounts
Material: Nylon Reinforced two-slit buckle. Used Alloy on unloading platforms and pouches Attention! This model of buckle used by the company 5.11 in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the color Sandstone
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon The semicircle increased for military use. Used Alloy on unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Acetal Spanish buckle, works silently, almost impossible to bring down. Used Alloy on the pouches
Material: Acetal Extra strong thickened fastex without adjustment from the series Stealth™. It is recommended to use in the belts of the backpacks
Material: Nylon Standard otnoshenia buckle
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Reinforced two-slit buckle. Used Alloy on unloading platforms and pouches Attention! This model of buckle used by the company 5.11 in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the color Sandstone
Material: Acetal Two-slit single buckle with separable slit. Used Alloy in Suspenders universal. It is recommended to use for the different mounts
Material: Nylon Reinforced two-slit buckle. Used Alloy on unloading platforms and pouches Attention! This model of buckle used by the company 5.11 in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the color Sandstone
Material: Acetal to 50 mm, nylon for 38 mm Classic buckle-adjustable reset itself on both sides. Rapid release, much safer than pastukov strength. It is recommended to use in the belts of the backpacks
Material: Acetal Lightweight trendeleva buckle from the NuLite®. The Alloy used in a series of ultralight backpacks
Material: Acetal Spanish buckle, works silently, almost impossible to bring down. Used Alloy on the pouches
Material: Nylon Reinforced two-slit buckle. Used Alloy on unloading platforms and pouches Attention! This model of buckle used by the company 5.11 in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the color Sandstone
Material: Acetal Trendeleva buckle from the Duckbill® with special dredging for fingers on the tip for ease of ohvatyvaya. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped)
Material: Acetal Trendeleva buckle from the Duckbill® with special dredging for fingers on the tip for ease of ohvatyvaya. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped)
Material: Nylon Trendeleva buckle, Alloy used on the tactical backpacks
Material: Nylon Trendeleva buckle, Alloy used on the tactical backpacks
Material: Nylon Trendeleva buckle military pattern from the Mojave®. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped). Used Alloy on unloading platforms and pouches
Material: Nylon Trendeleva buckle, Alloy used on the tactical backpacks
Material: Nylon Trendeleva buckle military pattern from the Mojave®. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped). Used Alloy on unloading platforms and pouches
Material: Nylon Trendeleva buckle military pattern from the Mojave®. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped). Used Alloy on unloading platforms and pouches
Material: Nylon Trendeleva buckle military pattern from the Mojave®. Has the increased angle of the weakening lines (need stronger to lift up the tip of the buckle to the sling slipped). Used Alloy on unloading platforms and pouches
Material: Nylon A buckle for fastening chest straps ties, with the ability to adjust the vertical position. Consists of a two-slit buckle with slots for putting in/dismantling on 25 mm vertical line running along the straps, combined with located on the side of odnomernoi buckle for 20 mm webbing horizontal rib tie
Material: Nylon A buckle for fastening chest straps ties, with the ability to adjust the vertical position. Consists of a two-slit buckle with slots for putting in/dismantling on 25 mm vertical line running along the straps, combined with located on the side of odnomernoi buckle for 20 mm webbing horizontal rib tie
Material: Acetal Buckle two-slit, both slits split. It is recommended to use for the different mounts
Material: Acetal Buckle two-slit, both slits split. It is recommended to use for the different mounts
Material: Nylon Extra strong thickened trendeleva buckle special modifications, unlike standard trendeleva can freely rotate around a loop of webbing to which the buckle is sewn. Thus, the adjustable sling is much easier to loosen under heavy load. Recommended for use in heavily loaded parts of the gear
Official website Duraflex Description in English
Official website Duraflex Description in English
Official website Duraflex Description in English
Material: Acetal Large clamp for the cord in diameter of 4-5 mm (e.g., paracord 550). Has an oval hole in the calculation under the two cords, but you can thread one. The side buckle has a holder for attaching the retainer to the loop of the braid. Used Alloy on the pouches Attention! This model of lock is used by Maxpedition in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig Maxpedition Khaki in colour
Official website Duraflex Description in English
Material: Acetal Versatile buckle for fastening the tube of the Hydrator to 20 mm or 25 mm webbing sewn along or across the strap (and other straps on the gear). The basis is a rectangle, two opposite sides of the slit with slits for putting on a sling of 25 mm, on other sides – slit with slits for 20 mm slings. In the center of the removable tube clamp, can be rotated around its axis, Sedekias in 8 different positions. With holes at 25 mm strap buckle can be fixed on the cell PALS
Material: Nylon Buckle for fastening of the tube volume to 25 mm webbing sewn along the straps. The basis is a two-gap buckle with the slits in the slit for putting on a sling 25 mm. In the center is the tube clamp parallel to the depower line.
Material: Acetal Fastex the military sample, the parent part is installed on the surface of the material, his father's part is a standard adjustable. Used Alloy on the pouches The maternal part consists of the buckle and the substrate. To install the buckle should be punched in the material three holes. In these openings are inserted the tabs on the back side of the buckle. From the inside of the material on the protrusions is put on a special substrate, is shifted in the direction along the buckle until the tabs clicks into the respective recesses The gap between the buckle and the substrate is calculated for some finite thickness of material, therefore when installing on thin materials it is recommended to add from the bottom-side reinforcing layer to increase the thickness
Material: Acetal Fastex the military sample, the parent part is installed on the surface of the material, his father's part is a standard adjustable. Used Alloy on the pouches The maternal part consists of the buckle and the substrate. To install the buckle should be punched in the material three holes. In these openings are inserted the tabs on the back side of the buckle. From the inside of the material on the protrusions is put on a special substrate, is shifted in the direction along the buckle until the tabs clicks into the respective recesses The gap between the buckle and the substrate is calculated for some finite thickness of material, therefore when installing on thin materials it is recommended to add from the bottom-side reinforcing layer to increase the thickness
Material: Acetal Fastex the military sample, the parent part is installed on the surface of the material, his father's part is a standard adjustable. Used Alloy on the pouches The maternal part consists of and the substrate. To install the buckle should be punched in the material three holes. In these openings are inserted the tabs on the back side of the buckle. From the inside of the material on the protrusions is put on a special substrate, is shifted in the direction along the buckle until the tabs clicks into the respective recesses The gap between the buckle and the substrate is calculated for some finite thickness of material, therefore when installing on thin materials it is recommended to add from the bottom-side reinforcing layer to increase the thickness
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on both sides. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on both sides. The Alloy used on the tactical backpacks
Material: Acetal Large fastex military-style, adjustable from both sides. Used Alloy on unloading platforms
Material: Acetal Large military-style, adjustable from both sides. Used Alloy on unloading platforms
Material: Acetal Large fastex military pattern, adjustable on the paternal side. Used Alloy on unloading platforms
Material: Acetal Large military sample, with adjustment for paternal part. Used Alloy on unloading platforms
Material: Acetal
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on both sides. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on both sides. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Stealth® adjustment on his father's part. Has a rounded shape (less clinging). Key fastex is spring-loaded to protect against breakage. Has the increased angle of the weakening lines (need stronger to lift up the tip of the insert buckle to sling slipped)
Material: Acetal Fastex from the Stealth® adjustment on his father's part. Has a rounded shape (less clinging). Key fastex is spring-loaded to protect against breakage. Has the increased angle of the weakening lines (need stronger to lift up the tip of the insert buckle to sling slipped)
Material: Acetal Special fastex from the Rock Lockster®, round shape, without adjustment. Part of normal maternal, paternal consists of two halves, the lines which are angled symmetrically to the maternal portion, forming a Y-shaped system. Both the paternal part can be judged separately by pressing the corresponding key
Material: Acetal Special fastex from the Rock Lockster®, round shape, without adjustment. Part of normal maternal, paternal consists of two halves, the lines which are angled symmetrically to the maternal portion, forming a Y-shaped system. Both the paternal part can be judged separately by pressing the corresponding key
Material: Acetal Fastex the military sample is from the Mojave®, adjustable on both sides. It is recommended to use breast straps and cable ties on the transverse contractions of the backpacks if made fastex in the middle of the facade
Material: Acetal Fastex from the S.J. Buckle, adjustable on both sides. Has increased strength due to the curved cross-section. The Alloy used in a series of ultralight backpacks. It is recommended to use breast straps and cable ties on the transverse contractions of the backpacks if made fastex in the middle of the facade
Material: Acetal Fastex from the S.J. Buckle, adjustable on the paternal side. Has increased strength due to the curved cross-section. The Alloy used in a series of ultralight backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side. On the maternal side there are protruding out special keys that allow easy to unbutton in thick gloves. It is recommended to use in winter gear
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side. The Alloy used on the tactical backpacks
Material: Acetal Fastex the military sample is from the Mojave® adjustment on his father's part. Used Alloy on unloading platforms and pouches Attention! This model of fastex is used by 5 companies.11 and Maxpedition in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the colors of Sandstone and Maxpedition in Khaki color
Material: Acetal Fastex the military sample is from the Mojave® adjustment on his father's part. Used Alloy on unloading platforms and pouches Attention! This model of fastex is used by 5 companies.11 and Maxpedition in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the colors of Sandstone and Maxpedition in Khaki color
Material: Acetal
Material: Acetal Fastex from the S.J. Buckle, adjustable on the paternal side. Has increased strength due to the curved cross-section. The Alloy used in a series of ultralight backpacks
Material: Acetal Miniature fastex for braided bracelets from paracord, without adjustment. Has an extended slit for threading the cord, rounded edges and a curved arc shape to better hug the wrist
Material: Acetal Miniature fastex for braided bracelets from paracord, without adjustment. Has an extended slit for threading the cord, rounded edges and a curved arc shape to better hug the wrist
Material: Acetal Miniature fastex for braided bracelets from paracord, without adjustment. Has an extended slit for threading the cord, rounded edges and a curved arc shape to better hug the wrist
Material: Acetal Miniature fastex for braided bracelets from paracord, without adjustment. Has an extended slit for threading the cord, rounded edges and a curved arc shape to better hug the wrist
Material: Acetal Miniature fastex for braided bracelets from paracord, without adjustment. Has an extended slit for threading the cord, rounded edges and a curved arc shape to better hug the wrist
Material: Nylon Buckle for winding unnecessary end 20 mm slings (straps, contractions, and sop.), a simple analogue of the Web Dominator from ITW Nexus. For use it is necessary to take a segment of elastic cord, threading it into the hole at one end of the buckle, tie the ends of the cord. The buckle is put on the Central gap of 20 mm line. Then the excess end of the line is wound around a roll buckle. On top of the roll is stretched a loop of elastic cord, loop hooked over a notch on the other end of the buckle, tightly clutching a sling and not allowing it to unwind
Material: Thermoplastic rubber Skill for lightning in the form of a loop of cord with glow in the dark rubber tip. Tip after 5-30 minutes of charging the light glows in the dark for 30 minutes. Is put on the zipper puller or on the castle
Material: Thermoplastic rubber Skill for lightning in the form of a loop of cord with glow in the dark rubber tip. Tip after 5-30 minutes of charging the light glows in the dark for 30 minutes. Is put on the zipper puller or on the castle
Material: Nylon The semicircle increased for military use. Used Alloy on unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Keys holder with the possibility of release (the button in the center of the buckle), without adjustment. The father's part is attached on 12 mm rope. The parent part with a small hole on the end for hanging the rings from the keys. It is recommended to use the organizers and clothing in EDC style
Material: Nylon Keys holder with the possibility of release (the button in the center of the buckle), without adjustment. The father's part is attached on 12 mm rope. The parent part with a small hole on the end for hanging the rings from the keys. It is recommended to use the organizers and clothing in EDC style
Material: Acetal Small hook clasp, both ends are attached to the cords or thin half-rings. We recommend that you use contractions backpacks elastic cord
Material: Acetal Small hook clasp, both ends are attached to the cords or thin half-rings. We recommend that you use contractions backpacks elastic cord
Material: Nylon Buckle for fastening of the tube volume to 25 mm webbing sewn along the straps. The basis is a two-gap buckle with the slits in the slit for putting on a sling 25 mm. In the center of the buckle is the tube clamp parallel to the depower line.
Designed for mounting additional equipment on an external sling backpack
Designed for mounting additional equipment on an external sling backpack
Designed for mounting additional equipment on an external sling backpack
Designed for mounting additional equipment on an external sling backpack
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Large fastex from the Rock Lockster®, round shape, without adjustment. Designed for tactical/pistol/utility belt with Velcro adjustment. With additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. The width of the cracks increased for threading in them thick belt slings and slings with sewn Velcro on them. Used Alloy on the band universal 50 mm v band universal the.2
Material: Acetal Major from the Rock Lockster®, round shape, without adjustment. Designed for tactical/pistol/utility belt with Velcro adjustment. With additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. The width of the cracks increased for threading in them thick belt slings and slings with sewn Velcro on them. Used Alloy on the band universal 50 mm v band universal the.2
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Plastic grommet for cord, use cord to adjust clothing. Designed for a cord diameter of 3 mm. For installation, you must insert the cord in the narrow part of the neck, pulling out wide and tie the end of the cord in a knot, leaving the end of the cord to the minimum length. Pull the cord so that the knot was stuck inside the tip, put it on the wide part of the cover until it clicks into place
Material: Acetal Plastic grommet for cord, use cord to adjust clothing. Designed for a cord diameter of 3 mm. For installation, you must insert the cord in the narrow part of the neck, pulling out wide and tie the end of the cord in a knot, leaving the end of the cord to the minimum length. Pull the cord so that the knot was stuck inside the tip, put it on the wide part of the cover until it clicks into place
Material: Polypropylene Whistle curved shape. On the back side has a clip for attaching to belts and slings equipment. Holes for suspension on a cord
Material: Polypropylene Whistle curved shape. On the back side has a clip for attaching to belts and slings equipment. Holes for suspension on a cord
Material: Polypropylene Whistle curved shape. On the back side has a clip for attaching to belts and slings equipment. Holes for suspension on a cord
Material: Thermoplastic rubber A very simple one-piece clamp for cord diameter 3.5 mm, is recommended for ultra light clothing. Is a tube (the cord passes freely through) with side plate, vlivayas in the seam, from one end of the tube – side slot. That slot serves for fixing of the cord to be stuck for what cord you have to pull sideways in the direction of the slits
Material: Thermoplastic rubber A very simple one-piece clamp for cord diameter 3.5 mm, is recommended for ultra light clothing. Is a tube (the cord passes freely through) with side plate, vlivayas in the seam, from one end of the tube – side slot. That slot serves for fixing of the cord to be stuck for what cord you have to pull sideways in the direction of the slits
Material: Thermoplastic rubber A very simple one-piece clamp for cord diameter 3.5 mm, is recommended for ultra light clothing. Is a tube (the cord passes freely through) with side plate, vlivayas in the seam, from one end of the tube – side slot. That slot serves for fixing of the cord to be stuck for what cord you have to pull sideways in the direction of the slits
Size: 38,4×13,7 mm
Material: Acetal Buckle two-slit, both slits split. It is recommended to use for the different mounts
Material: Acetal Two-slit single buckle with separable slit. Used Alloy in Suspenders universal. It is recommended to use for the different mounts
Material: Acetal Two-slit buckle with ornamental design
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Acetal Two-slit buckle with ornamental design
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard two-slit buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Acetal Two-slit buckle with ornamental design
Material: Acetal Two-slit buckle with ornamental design
Material: Nylon Trendeleva buckle with a slot in the partition wall on the hinge side of the lines on which the buckle is usually attached. It is recommended to use to replace a broken trendeleva (repair kit)
Material: Acetal Specific plastic reinforced semi-circle, stitched on the strap, designed for mounting carabiner hook
Material: Acetal Specific plastic reinforced semi-circle, stitched on the strap, designed for mounting carabiner hook
Material: Acetal
Material: Acetal to 50 mm, nylon for 38 mm Classic buckle-adjustable reset itself on both sides. Rapid release, much safer than pastukov strength. It is recommended to use in the belts of the backpacks
Material: Acetal to 50 mm, to 38 mm Classic buckle-adjustable reset itself on both sides. Rapid release, much safer than pastukov strength. It is recommended to use in the belts of the backpacks
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Nylon Standard otnoshenia buckle. The Alloy is used in tactical backpacks, unloading platforms and pouches
Material: Acetal, steel The triangular loop of steel wire and plastic used on the bags to attach the shoulder straps. Due to the triangular ring shape and narrow slits for straps prevents cranking around slings and excessive hanging bags
Material: Acetal Fastex the military sample is from the Mojave®, with adjustment for paternal and maternal part of the special part, which is attached (with further disassembly) along the 25 mm lines on its surface. On both ends of the maternal part of fastex are slits with the slits, which are placed on the flying line. The arrangement of slots adapted for attaching to cell PALS. It is recommended to use for the manufacture of panels of the bibs and backpacks, attached to the armor, sheathed slings PALS
Material: Acetal Fastex from the Stealth® adjustment on his father's side and a slit in the partition to the maternal parts. It is recommended to use to replace a broken mother's side of the fastex Stealth ™ (repair kit)
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side, with additional insurance against accidental unzipping with the built-in lock. For unzipping in addition to standard side-mounted keys you need to press the button in the center of the buckle. Recommended for equipment that requires protection from loss (e.g. a strap for the camera). Not recommended for products requiring a quick reset (for example, a belt backpack or gun strap)
Material: Acetal Buckle for fastening the knots of tent. The upper part is vertically oriented adjustment insert buckle for 20 mm webbing, bottom horizontal is from the hole for the stop of the arc of the frame and cracks to the horizontal force 20 mm slings
Material: Acetal Fastex the military sample is from the Mojave®, adjustable on both sides. It is recommended to use breast straps and cable ties on the transverse contractions of the backpacks if made fastex in the middle of the facade
Material: Acetal Fastex the military sample is from the Mojave®, adjustable on both sides. It is recommended to use breast straps and cable ties on the transverse contractions of the backpacks if made at the middle of the facade
Material: Acetal Fastex the military sample is from the Mojave® adjustment on his father's part. Used Alloy on unloading platforms and pouches Attention! This model of fastex is used by 5 companies.11 and Maxpedition in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the colors of Sandstone and Maxpedition in Khaki color
Material: Acetal Fastex the military sample is from the Mojave® adjustment on his father's part. Used Alloy on unloading platforms and pouches Attention! This model of fastex is used by 5 companies.11 and Maxpedition in some models of equipment, and can therefore be used for replacement in case of breakage. Hardware color Tan sold by Alloy, identical to the shade of accessories on the rig 5.11 in the colors of Sandstone and Maxpedition in Khaki color
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on both sides. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on both sides. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side. The Alloy used on the tactical backpacks
Material: Acetal Fastex from the Rock Lockster®, round shape, adjustable on the paternal side. The Alloy used on the tactical backpacks
Material: Acetal Extra strong thickened without adjustment from the series Stealth™. It is recommended to use in the belts of the backpacks
Material: Nylon, steel Carabiner hook for suspension shoulder straps to the rings of bags. The base of the carabiner rotates freely around a vertical axis
Material: Nylon, steel Carabiner hook for suspension shoulder straps to the rings of bags. The base of the carabiner rotates freely around a vertical axis
Material: Nylon, steel Carabiner hook for suspension shoulder straps to the rings of bags. The base of the carabiner rotates freely around a vertical axis
Material: Nylon, steel Carabiner hook for suspension shoulder straps to the rings of bags. The base of the carabiner rotates freely around a vertical axis
Material: Acetal Complete with ring carabiner hook is designed for zip-in compatibility gloves. Alloy purchased without rings and used inside of pouches-organizers as carabiner for hanging items
Material: Acetal Complete with ring carabiner hook is designed for zip-in compatibility gloves. Alloy purchased without rings and used inside of pouches-organizers as carabiner for hanging items
Material: Acetal Trendeleva buckle with one split gap on the hinge side of the lines on which the buckle is usually attached. Used Alloy in Suspenders universal. It is recommended to use as an easily installed temporary replacement for a broken buckle or trendeleva for a variety of mounts
Material: Nylon
Material: Acetal to 50 mm, to 38 mm Classic buckle-adjustable reset itself on both sides. Rapid release, much safer than pastukov strength. It is recommended to use in the belts of the backpacks
Material: Nylon The semicircle increased for military use. Used Alloy on unloading platforms and pouches
Material: Acetal for 10-mm nylon 12 mm The standard semiring
Material: Acetal for 10 mm, 12 mm The standard semiring
Ask a question