DMT

DMT

8 products, 1 review, 6 videos
DMT (Diamond Machining Technology) is a U.S. company since 1976, producing a variety of diamond sharpening system. From keyfobs-sharpeners and diamond paste up to 10" (~25cm) diamond bars.
This American company is without doubt a leader in the production of diamond tools for sharpening. This company produces an extensive range of grinding tools for use in industry, gardening, fishing, hunting, active rest, etcD. All the tools DMT ® manufactured in the USA. The DMT ® was founded by David and Elizabeth Powell in 1976, its products is widely respected throughout the world. Monocrystalline diamonds are used in tools DMT, are of high quality and durability.
All products are famous for excellent quality and good service. According to the company their stones most flat, the most durable, with the most dense and uniform diamond distribution on the surface. The opinion of professionals and user reviews this information to confirm if a diamond, best DMT.
The main advantages of this product DMT:
  • The high homogeneity of the abrasive surfaces as derived exclusively from a careful sifting of diamond powder.
  • High strength it can be deposited on steel surface by careful and strictly observe the process.
  • The exclusive reasonableness of each individual item literally in every detail, I very rarely find in their products that would then you can fix or improve.
  • Perfectly matched with the degree of grain abrasives that allows you to perform sharpening in full or conversion of almost every blade.
  • A very wide range of products, allowing you to choose the appropriate for nearly every need manual sharpening.
  • The offer is also very fine-grained diamond abrasives on ceramic base that can further extend the capabilities of the tools and scope of their assistance work.
  • Diamond abrasives series Diamond Whetstones are in the form of light hollow bricks of colored plastic, to the upper surface of which is fused "perforated" thin steel plates set on them with diamond powder of different degrees of granularity. Despite the catalogue the title of the series, the only one of them that has any relation to the stones is a diamond abrasive powder, which covered work surface.
These tools are in four levels of granularity:
  • coarse grained (extra-coarse, 220 grit, grain size 60 microns) is marked in black color;
  • coarse (coarse, 325 grit, grain size 45 microns) marked in blue;
  • fine-grained (fine, 600 grit, grain size 25 microns) are marked in red;
  • very fine (extra-fine, 1200 grit, grain size 9 microns) are shown in green.
These color designations and the corresponding numerical values of grain size are repeated in all DMT products.
Itself is a plastic block with a diamond abrasive surface of any mentioned degrees of granularity can be Packed or in a wooden box with lid or mounted on a plastic base-the pedestal with a transparent plastic lid.
Abrasive surface size 52 155 mm (6 by 2 inch) in both versions raised above the table by 30 mm, which provides a comfortable and safe work on them. Effectively rubber feet prevent sliding on a table surface and sufficient stiffness provides a stable position of the tool.
Plates are sold complete with branded lining of flexible silicone plastic, which effectively prevents slipping on a table surface during use. Separately, you can buy a plastic base stand, universal for inserts of both sizes. Quick-acting latches securely hold the plate and simultaneously allow a few seconds to replace it or flip.
Plate Dia-Sharp are issued as unilateral or bilateral. One-sided equipped with an anti-slip stick on rubber feet. Under bilateral it is necessary to enclose the already mentioned brand lining made of silicone plastics, which are supplied with the plate. Firm, usually do not forget about such trifles eliminating the need to combine and improvise at home, trying means at hand to fill the factory gaps.
A few are highlighted in this series also pertain to her cutting plate in the form of credit cards (83 x 51 mm) with a thickness of only 1 mm and 4.5-inch (114 x 19 mm) files with a convenient plastic handles.
The degree of granularity of files color-coded plastic handles.
Basic combinations of grit and sizes:
  • super-coarse-grained (extra-extra coarse or xx-coarse), 120 grit, grain size 120 microns gray;
  • extremely fine-grained (extra-extra fine or xx-fine), 8000 grit, grain size 3 micron, marked with the beige color.
Super-coarse-grained can be useful for quickly removing large quantities of steel pureprofile barbarously neglected or damaged blade with notches and/or heavily deformed cutting wedge. The manufacturer also proposes the use of super-coarse diamond abrasive for lapping the plane of the natural and artificial grinding stones.
Extremely fine — this is a high polished blade, in real conditions of use of the cutting tool for anything is almost unnecessary. But if you really want to boast in front of experts and connoisseurs, it is possible to replace the abrasive material of very small aluminosilicate ceramic. The effect will be almost the same, and work at polishing the blade and subsequent cleaning of the abrasive material after grinding will be considerably less.
Recommendations for the use of other abrasive plates series Dia-Sharp sharpening only what can and should be sharpened, including the blades are very small, strongly curved tip or point.
No products to compare
Sorting:
Number:
Бренд: DMT
Appointment
Type of equipment
Цена
Dimensions: 70×25 mm Grit: 325 grit (Coarse)(blue pen); 600 grit (Fine)(red handle) Manufacturer: Diamond Machining Technolgy (USA) Foldable diamond whetstone pocket due to small dimensions easily fits in your pocket or on your key ring The bar is made of monocrystalline diamonds enclosed in a continuous Nickel based, which allows you to quickly and efficiently sharpen even very hard steel
Dimensions: 70×25 mm Grit: 325 grit (Coarse)(blue pen); 600 grit (Fine)(red handle) Manufacturer: Diamond Machining Technolgy (USA) Foldable diamond whetstone pocket due to small dimensions easily fits in your pocket or on your key ring The bar is made of monocrystalline diamonds enclosed in a continuous Nickel based, which allows you to quickly and efficiently sharpen even very hard steel
Length: 113 mm Diameter: from 6.5 to 1.5 mm Grit: 600 grit (Fine) Manufacturer: Diamond Machining Technolgy (USA) Folding diamond knife sharpener sharpening serreytornoy Made of monocrystalline diamonds of prisoners in Nickel base (lining rubber) that allows you to quickly and efficiently sharpen even very hard steel. Also used for high-speed steel and non-metallic materials (glass, ceramics, etc p.) Made of monocrystalline diamonds of prisoners in Nickel base that allows you to quickly and efficiently sharpen even very hard steel
The sizes of the bars: 110 x 22 mm Grit: 1200 grit (Extra fine)(green side), 600 grit (Fine)(red), 325 grit (Coarse)(blue) and 220 grit (Extra Coarse)(black) Manufacturer: Diamond Machining Technolgy (USA) The set includes four diamond stones of various grits and a nylon case for storage and carrying
The sizes of the bars: 110 x 22 mm Grit: 1200 grit (Extra fine)(green side), 600 grit (Fine)(red), 325 grit (Coarse)(blue) Manufacturer: Diamond Machining Technolgy (USA) The kit includes a holder, a clamp to secure the blade with different angles of sharpening, diamond whetstone 3 different grit, a holder for bars, a device for sharpening serration, plastic case
The sizes of the bars: 110 x 22 mm Grit: 600 grit (Fine)(red face), 325 grit (Coarse)(blue side) Manufacturer: Diamond Machining Technolgy (USA) Bilateral diamond folding sharpener Made of monocrystalline diamonds of prisoners in Nickel base (lining rubber) that allows you to quickly and efficiently sharpen even very hard steel. Also used for high-speed steel and non-metallic materials (glass, ceramics, etcp.)
Dimensions: 203×76×10 mm Grit: 120 grit (Extra Coarse); 600 grit (Fine) Manufacturer: Diamond Machining Technolgy (USA) 8-inch bars are the most popular size in the entire range of bars "Dia-Sharp" The bar is made of monocrystalline diamonds enclosed in a continuous Nickel based, which allows you to quickly and efficiently sharpen even very hard steel. Also used for high-speed steel and non-metallic materials (glass, ceramics, etcp.) Includes 4 self-adhesive rubber feet to prevent slipping of the bar when sharpening When sharpening it is recommended to periodically wet the sandpaper with water and lightly (without much pressure), both from themselves and for themselves, to sharpen
Dimensions: 203×76×10 mm Grit: 120 grit (Extra Coarse); 600 grit (Fine) Manufacturer: Diamond Machining Technolgy (USA) 8-inch bars are the most popular size in the entire range of bars "Dia-Sharp" The bar is made of monocrystalline diamonds enclosed in a continuous Nickel based, which allows you to quickly and efficiently sharpen even very hard steel. Also used for high-speed steel and non-metallic materials (glass, ceramics, etcp.) Includes 4 self-adhesive rubber feet to prevent slipping of the bar when sharpening When sharpening it is recommended to periodically wet the sandpaper with water and lightly (without much pressure), both from themselves and for themselves, to sharpen
Ask a question