Products from digital flora category

244 products, 89 reviews, 19 videos
Compare (0)
Sorting:
Number:
Height
Size
Бренд
Color
The type of camouflage
Type headdress
Type of equipment
System
Material
The type of clothing
The backpack
Type of a sleeping bag
Office
Shoes style
Backpack style
The type of bag
Sex
Time of year
Appointment
Jacket type
Type of clothing
Звание
Защитные свойства
Утеплитель/подкладка
Цена
Fabric: "Panacea" Composition: 67% polyester, 33% viscose 155 g/m2   The costume consists of trousers and Jacket straight cut:-turn-down collar;-Central zip closure covered by a windproof plank;-2 patch pockets with flaps on the chest;-2 patch pockets with flaps on the sleeves with Velcro;amplifiers on the elbows made from the main fabric; Pants straight cut-Central zip closure;-six belt loops under the belt on the belt;Side -2 side pockets, 2 side overhead volume pockets and 2 patch pockets with flaps rear;amplifiers on the knees of the base fabric.
Summer suit consists of a jacket and trousers. Is part of an all-season set of basic uniforms (WCBO). Suit fabric Mirage (PE-65% cotton-35%), with a high content of cotton is hygienic and comfortable to daily wear. The jacket is straight cut. Stand – up collar, adjustable volume, patoi on a textile fastener. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener. In the elbow pads-amplifiers with input protectors on textile fasteners. In the lower part of the sleeve – patch pocket for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with hidden button closure. In the area of seat trim amplifier
Winter military field figure (pea coat army authorized number). New sample. Has two detachable hood (Balaclava and winter). Complete lining to protect from the low temperatures. Top fabric - durable waterproof nachomama blended semi-synthetics (Greta cotton-53% polyester-47%). Large hood, wide Velcro covers the neck and part of his chin. Central zipper, closed windproof strap on buttons. The model has kuliski-regulators around the waist and hemline. Hands from cold and wind protect cuff of wide practical knitwear. Mounts for shoulder strap and on the shoulders and on the chest and sleeve.
The suit includes pants and. The jacket is straight cut. Stand – up collar, adjustable volume, patoi on a textile fastener. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. The pockets are tilted, the hands. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener, with belt loops ribbon belt from the inner side of the valves. In the elbow pads-amplifiers with input protectors on textile fasteners. At the bottom of the sleeves – pockets for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with hidden button closure.In the area of seat trim amplifier Fabric: Mirage-210, PE-67%, CL-33%
Tactical shirt MPA-12 is designed to be worn with body armor in hot weather. The combination of nylon and cotton that provide maximum comfort, eliminating the formation of wrinkles, and unrestricted freedom of movement. FEATURES FOR HOT WEATHER FOR HEAVY LOADS MATERIALS NYLON 65% POLYETHYLENE, 35% COTTON
The costume of the MPA 21 is a summer camouflage suit The camouflage suit does not restrict movement,person, very easy and comfortable. Used by tribalistas, military, hunters and lovers of active style of rest The costume consists of a jacket and trousers. Straight cut jacket with a stitched hood, consisting of several parts, with side inserts of knitted fabric (mesh). The volume of the hood on the front adjustable neck cord. Central fastener with buttons "Canada" attached braid. Shelf with chest pockets and side pockets volume. Pockets with scalloped flaps buttoned Canada. The entrance to the pockets is inclined. On the waist line, from the inner side nastrojka slide with elastic tape for volume control. The ends of the elastic tape secured by stitching. Combo sleeves, loose fit. In the elbow pads are amplifiers. At the bottom of the top part of the sleeve of the back side there are vent inserts made of knitted fabric (mesh). Camouflage sleeves with cuffs at the wrist area, with a hole for your thumb. Scribbled on the back 18 of the belt loops on nemelka. Pants without side seams with gusset on the seam stepper. Stitched waistband with six belt loops under the belt, with hinged loops for attaching suspenders. Volume the waistband is adjustable with elastic tape on the lateral parts. The belt and codpiece fastens with buttons. with side pockets located in the joints of the lining-amplifier and rear pockets with scalloped flaps buttoned Canada. Burlap pockets forms a trim-amp. On the front parts of trousers in the knee area are lining-amplifiers.The bottom of the pants pulled elastic tape. Fabric: "Panacea" Composition: 67% polyester, 33% 155 g/m2
Summer suit. Consists of shirt shirt View all products by tag shirt and trousers. Shirt Shirt kind of easy shoulder wear. As a rule, the word shirt, currently, it is accepted to name clothes for boys and men, also called the upper chemise or men's shirt. The history of the... Learn about Shirt from the Encyclopedia a straight cut. Turn-down collar Central button closure. On the shoulder line the shoulder straps shoulder straps View all products by tag shoulder boards with removable stalemates (fullpagename) With back yoke. Two chest patch pockets with flaps on the buttons. Two side slash pockets with leaflets. At the bottom of the jacket jacket View all products by tag jacket the cutting zone, the volume of which is adjustable by side panels with elastic braid. Sleeves Duchovny, short. On bottom of sleeves cuffs with flap button closure. Pants Pants (niderl. broek), or Pants (the Kyrghyz. Istan) the subject of outerwear covering the lower body, including each leg separately, covering the knees. In the classic version of pants on the bottom... Learn about Pants from the Encyclopedia a straight cut. Detachable belt with five belt loops under the belt. Volume the waistband is adjustable by side panels with elastic braid. Zip. Two side slit pockets.On the right rear half placket button closure. The arrow on the front halves of trousers stitched. Fabric: "Panacea" Composition: 67% polyester, 33% viscose viscose (Viscose) – the first man-made fabric, which was received by the person. Viscose (in Latin "viscosus" means "viscous") is an artificial fiber that is produced by... To learn more about Viscose from Encyclopedia 155 g/m2
The costume consists of trousers. Straight cut jacket with a Central countersunk (supatoy) closure on "Canada". Stand-up collar with zipper on the button. Shelf with voluminous patch pockets (two chest, two side) with flaps, fastened with the Canada. The left side inner pocket water resistant fabric with Velcro fastener Telekrona back waist inner rocker with perforated rubber band and buttons for volume control. At the bottom of the slide with cord and clamps for volume control, the cord ends are withdrawn from the inner side and closed plates. Double-seam set-in sleeves with elbow pads and cuffs nestrashnye with stalemates curly shape fastened with "NATO". On the sleeves pockets with zipper at the side, in the joints of connection of the sleeve with the armhole at the shoulder vacany shoulder straps with slip-on shoulder straps snap button "NATO". Sleeves with vents with protective mesh in armhole. Trousers with stitched belt, fastened with sewn loop and button, with five wide belt loops: two halves on the front and three on the hind halves. The lateral portion of the belt tight elastic band. The codpiece of trousers with a hidden button closure. The front half of the trousers with soft pleats, side pockets and overhead volume pockets with flaps with zipper on the button "Canada" in the region of the side seams. In the knee nastrochennogo gusset plate with soft pleats. Halves on rear pockets with flaps with zipper on the button "Canada". Overlay-amplifier in the seat part forms a burlap pockets. On the bottom of the trousers is inserted braid to adjust the width and stropki. Fabric: Mirage-210, PE-67%, CL-33%
Summer suit. Consists of shirt shirt View all products by tag shirt and trousers. Shirt Shirt kind of easy shoulder wear. As a rule, the word shirt, currently, it is accepted to name clothes for boys and men, also called the upper chemise or men's shirt. The history of the... Learn about Shirt from the Encyclopedia a straight cut. Turn-down collar Front zip detachable zip. On the shoulder line the shoulder straps shoulder straps View all products by tag shoulder boards with removable stalemates (fullpagename) With back yoke. Two chest patch pockets with flaps on the buttons. Two side slash pockets with leaflets. At the bottom of the jacket jacket View all products by tag jacket the cutting zone, the volume of which is adjustable by side panels with elastic braid. Sleeves double-seam, short. On bottom of sleeves cuffs with flap button closure. Pants Pants (niderl. broek), or Pants (the Kyrghyz. Istan) the subject of outerwear covering the lower body, including each leg separately, covering the knees. In the classic version of pants on the bottom... Learn about Pants from the Encyclopedia a straight cut. Detachable belt with five belt loops under the belt. Volume the waistband is adjustable by side panels with elastic braid. Zip. Two side slit pockets.On the right rear half placket button closure. The arrow on the front halves of trousers stitched. Fabric: "Panacea" Composition: 67% polyester, 33% viscose viscose (Viscose) – the first man-made fabric, which was received by the person. Viscose (in Latin "viscosus" means "viscous") is an artificial fiber that is produced by... To learn more about Viscose from Encyclopedia 155 g/m2
The costume consists of trousers. Jacket is straight cut with a stitched hood, consisting of several parts, with side inserts of knitted fabric (mesh). The volume of the hood on the front adjustable neck cord. Central fastener with buttons "Canada" attached by braid, is to set the bar at the top of the shelves. Shelf with chest pockets with shaped button flaps on the "Canada". The entrance to the pockets is inclined. On the waist line, from the inner side nastrojka slide with cord, the ends of which are brought to a person. The volume on the bottom adjustable elastic cord with clamps. The tabs displayed in the side sections on the inner side and closed areas (pads). Combo sleeves, loose fit. In the elbow pads are amplifiers. At the bottom of the armhole ventilation inserts are made of knitted fabric (mesh). Camouflage sleeves with cuffs with a slit for the big toe on the elastic band in the wrist area. without side seams with gusset on the seam stepper. Stitched waistband with six belt loops under the belt, with hinged loops for attaching suspenders. Volume the waistband is adjustable by side panels with elastic braid. The belt and codpiece fastens with buttons. with side pockets with shaped flaps , fastened with a button "Canada". Pockets are located in the seams sewing on a lining-amplifiers in the upper part of the rear halves of trousers. On the front parts of trousers in the knee area are lining stiffeners with gusset for movement. The bottom of the pants pulled elastic tape. Fabric: "Panacea" Composition: 67% polyester, 33% viscose 155 g/m2
Classic low sneakers. Lightweight casual shoes with breathable uppers and rubber soles, retained the design of the first models, but received the original camouflage color Top of durable breathable fabric Cloth interior trim Soft inner insole made from foam rubber Holes for ventilation Thin walls and tongue Rubber sole Flat lacing with metal eyelets Flexible rubber sole Perhaps seasoned tourists, spoiled trekking footwear, it is hard to imagine that the sneakers are not only involved in physical education, but went Hiking. However, always remained a danger to beat my feet on the stones, and the rest wander in the sneakers on rocky trails very well. Flexible rubber sole is not slippery and holds well on the rocks, feet not too hot and easy. Swimmers wore sneakers on wetsuits, rafting on the rivers on catamarans and kayaks. So this footwear are quite militant past. Today there are lots of other Hiking boots, but sneakers stayed, and as a recreational and casual options are becoming more popular. Indeed, what could be better than to walk through the city streets and forest paths to wander on the sandy beaches, play volleyball or ride a bike in these soft, fluffy Slippers.
Fabric: "Panacea" Composition: 67% polyester, 33% viscose 155 g/m2 The costume consists of trousers and Jacket straight cut:-turn-down collar;-Central zip closure covered by a windproof plank;-2 patch pockets with flaps on the chest;-2 patch pockets with flaps on the sleeves with Velcro;amplifiers on the elbows made from the main fabric; Pants straight cut-Central zip closure;-six belt loops under the belt on the belt;Side -2 side pockets, 2 side overhead volume pockets and 2 patch pockets with flaps rear;amplifiers on the knees of the base fabric.
Summer suit. Consists of hoodie and pants. a straight cut. The hood is stitched. Chin part with zipper on the button. The volume of the hood is adjustable vertically, patoi on a textile fastener. Horizontal swing arm with elastic cord with lock. Central zip concealed (supat) button - "Canada" attached to the bar tape. Two chest overhead volume pockets with flaps with button closure and internal valves. Two side overhead volume pockets with flaps with buttons. Volume around the waist is regulated by a slide with an elastic cord with clamps. Vtachnoy sleeve, with lining-amplifiers with two undercuts. Volume at the bottom of the sleeve is regulated by a slide with an elastic band. From backstage comes the free part of the sleeve with a slot for your finger. a straight cut. Tselnokrajnie waistband with five wide belt loops . The volume of the belt can be adjusted, elastic tape and cord stoppers in the secondary wings the codpiece with hidden clasp on the buttons. Two side pockets, parallel to the entrances to the pockets – the slits for ventilation, General closed valve on the buttons. Two side overhead volume pockets with flaps with button closure and internal valves The upper part of the rear half of the pants – double Lining-amplifiers with tucks at knees.The volume on the bottom adjustable elastic braid. On the bottom of the pants by stepping seam lining-amplifiers.
The classic model, straight cut Material: 100% Cotton Product weight: 50 R-R – 166 g 54 R-R – 203 g 58 R-R – 217 g REVIEWS: Review the website "Russel" YOU MAY BE INTERESTED IN:
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
The jacket is from U.S. army field ACU form. Discontinued, replaced by the ACU Jacket-M Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Attention! For jacket colors digital flora you can buy a kit yourself sew a shoulder strap Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 46/176 R-R – 546 g 50/176 R-R – 607 g 54/182 R-R – 758 g 58/188 R-R – 823 g YOU MAY BE INTERESTED IN:
Fabric: Jackets membrane rip-stopComposition of raw materials of the fabric :Layer 1: 92%polyester, 8% spandex vodohranilische with Teflon impregnation.2 layer: membrane 10000WRP/5000MVP.3 layer: the mesh is 100% nylon.Insulation: "Fibersit" 150 g/m2 .Color: Python-ScalaDescription: The costume consists of a jacket and trousers,with external water-repellent layer of fabric on the membrane,with insulation Fibersit.Jacket:-long,non-removable hood,removable insulating jacket.-Front zip detachable two-way "zipper";-hood:with a removable visor,adjustable along the face cut;-upper front and side pockets with vertical entrance, "lightning";-lining is a removable jacket for another layer of insulation Fibersit.Pants:-removable insulated spacer,insulated with a wide belt and shoulder system for discharge of elastic tapes;-the front halves of trousers with pockets and the vents on "lightning";-the knee pads-amplifiers;bottom side seam zipper;-inside bottom hem of pants with knitted cuffs wristlets.
Description: Jacket MPA-02 with windproof placket and chin strap, removable insulated jacket and hood . Stand-up collar. Before cutting through the waist, the upper part of the front with vertically-stacked pockets on the clasp "lightning" and bulky patch pockets with flaps, fastened with a loop and "canadian" button. On the lower parts of the front are overhead volume pockets with flaps fastened with loop and "canadian" button. The back with a stitched bottom. Volume jacket at the waist adjustable set-in swing arm with cord. The ends of the cord through the clamps removed. Sleeve one-piece with side parts of the front and back, double seam with an opening at the bottom for width adjustment with the help of textile fasteners. Scribbled on the sleeves pockets on "lightnings", which is hidden. Hood with visor and drawstring for adjustment of the hood. Facial neck pulled the cord, whose ends are withdrawn through the eyelets , cord length is adjustable latches . At the shoulder seams are loops under the shoulder straps. Shoulder straps and trim detachable shoulder straps. Detachable jacket (liner) is fastened to the jacket with a zipper on the edges of the sides and the neck, as well as on the loop of elastic cord and button closure along the seam, the attaching knitted cuffs. The removable liner is made of double sided quilted fabric. Single-seam set-in sleeves with a stitched knit cuffs. On the left side of the inner removable jacket patch pocket scribbled on a textile fastener, a pocket from main fabric. Insulation: "Fibersit" Unique product, irreplaceable in extreme conditions, with high physical loads. Replaces multiple layers of clothing combining petrolacosaurus and the heat insulation layer. Thanks tselnokrajnimi sleeves provides unrestricted freedom of movement and reducing fatigue. Detachable jacket (liner) allows you to provide comfort when a sharp change of the ambient temperature: day-night, high up in mountains. A large number of different pockets(overhead surround, Welt) is convenient to accommodate all kinds of equipment. Recommended to operate complete with underwear. Temperature of +10 º C to 0 º C .
Jacket suit winter field for servicemen sample of 2010. Different from the original external wind - and waterproof fabric, lightweight insulation and removable more comfortable front zip Outer fabric – Oxford (100% nylon). Unlike blended fabric original is waterproof, windproof and has high strength. Lining made of light synthetic fabric Central zipper, covered on the outside strap buttons (original buttons). Better protects from cold and wind, easier to work even in warm gloves For simplicity and ease of insulation (sintepon) is not changeable. The amount of insulation is less than in the original, more mid-season by appointment Strengthen the elbow pads of the second layer of tissue Cuffs fastened with a cloth pieces with Velcro Shoulder straps with Velcro sewn on the shoulders (the location of the new sample). Fanspage included High wide collar with fleece-lined. Fastens with Velcro Hooded insulated fleece layer, retracts into the collar. Is dragged around the face, and in two dimensions on the back of his head. Front fastens with Velcro The waist is dragged elastic cord with two clamps on the underside of the jacket Loop hanger on the collar from the inside Pockets: invoices two lower flat pockets with flaps with Velcro breast inset pockets to warm hands. With a sloping entrance at a comfortable angle, insulated fleece internal pocket for documents with Velcro flap (from the heart), from water resistant fabric
Material: 100% Cotton
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 91 g Size: 13×11×5 cm (including the thickness of the insert buckle) Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer1 pouch to store SVD/carbine "Tiger" on the fastex. Replaces Pouch to store the SVD (Ref.2). Compared to the old model pouch has been redesigned from scratch and is more user-friendly design Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation Suitable for 8-charging shops saiga-308 and Tigr-308 The pouch is sewn entirely of two layers of fabric Cordura® 500d Fastens with Duraflex fastex®, the parent part is installed on the front wall of the pouch. The installation location of the fastex enhanced inside the second layer of fabric. Fastex opens silently easy to handle In the front wall of the pocket between the two layers of fabric Cordura® 500d sewn a piece of plastic. It supports the shape of the pocket, facilitating the introduction and extraction of the shop From the main compartment of the pouch Peeps at least 2.5 cm in height store the SVD, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. The valve is easily removable and not interfering with the retrieval of the store All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro; - lateral areas of the belt tight elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Budget version of the BDU cap. Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 Hard visor The lining is cotton calico (in addition to the models of 100% cotton rip-stop) Complements a summer dress Is made on the model of the American model "commander" To ensure hygiene, lining cotton fabric Material: For colors Digital flora, Les, Tiger, Central Europe, Woodland, 3 color. The birch: Strong rip-stop, 53% cotton, 47% polyester Colors for Woodland, Smog, City, Shadow, Forest: Gretta, 60% cotton, 40% polyester For colors, Desert, urban: Rip-stop, 100% cotton
Durable and elastic, warm and comfortable pants anatomical cut designed to maintain a comfortable body temperature in the cold season during active physical exertion, in bad weather, with the wind and rain. Features For heavy loads Protection from rain and wind For outdoor activities Protection from the cold
Jumpers MPA-11 used alone or as an extra warming layer, depending on weather conditions and tasks. Perfectly wicks moisture away from the body, does not restrict movement. FEATURES SHARE CUT PROTECTION FROM THE COLD MATERIALS 65% POLYETHYLENE, 35% COTTON FLEECE
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
The classical model for cold weather
This suit is designed to protect from rain at minimal cost and maximum comfort. The product is made of membrane fabric with Teflon coating. These materials allow the suit to effectively repel moisture and do not miss the wind. Details: Hood with visor folds into the collar-pocket. All zippers are waterproof. Each sleeve has platforms on Velcro for patch. Underarms placed vent holes with mesh that prevents the inner t-shirt from abrasion on the zipper. The cuffs on the sleeves regulated with snap closure Velcro for better protection from wind and moisture. On the back is roomy pocket with two zips and the mesh. At the bottom of the jacket is elastic cord with locking mechanism for width adjustment. Pants have belt loops, side vents and slits in side seams and zipper.
The cap consists of five wedges with straight visor with two holes for ventilation and a strap to fit to size. FEATURES PROTECTION FROM RAIN AND WIND MATERIALS SOFTSHELL
Material: 94% Cotton 6% Spandex Product weight: 44 R-R – 45 g
The most popular model You can use fanspage The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Pleats at back to give extra freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves to prevent the penetration of the cold under clothing Used stainless button May be upgraded with a jacket hood, collar and liner Pockets: 2 chest, 2 downstairs and 1 internal Laces: cord for tightening the waist and bottom jacket Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 300 g/m2 SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN: Screaming appearance is not always the key to functionality. Winter on the M4, despite its modest appearance, is the most popular model of the winter collection. Warm, durable, windproof and water-repellent, thanks to used in manufacturing Oxford fabric (100% nylon with coating), it is unpretentious and affordable, and when combined with "jump suit insulated" will provide complete protection from snow, wind, moisture and cold. Insulation – synthetic fiber polyester wadding (300 g/m2), unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. From wind and cold and protects front two-way zipper with windproof placket, which opens at both the top and bottom and knitted inner cuffs of sleeves, in combination with drawcord waist. In section "Accessories" can be purchased separately hood, collar and liner that initially the jacket is not included. The jacket is popular for use as workwear, field form of clothes for security structures, as well as good for summer, winter exits into the forest or winter fishing. In the camouflage version, you can use fanspage.
Completely camouflaged version Jacket "Mountain 3", made of the same materials (new high quality canvas and gain of 100% polyester rip-stop) Coloring of the sheet and reinforcing fabric coincide with each other and are exact duplicates of the respective colors in the rest of the range of the Alloy Attention! Before washing to remove the protective inserts in the knee pads/elbow pads from the respective pockets. Do not wash protective inserts in the washing machine. When washing in a washing machine products from tarpaulin - perhaps the emergence of signs of wear. SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN: You may be interested in:
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
Completely camouflaged version Trousers "Mountain 3", made of the same materials (new high quality canvas and gain of 100% polyester rip-stop) Coloring of the sheet and reinforcing fabric coincide with each other and are exact duplicates of the respective colors in the rest of the range of the Alloy Attention! Before washing to remove the protective inserts in the knee pads/elbow pads from the respective pockets. Do not wash protective inserts in the washing machine. When washing in a washing machine products from tarpaulin - perhaps the emergence of signs of wear. REVIEWS: Review tankist_sssr For a discussion of this model on the forum YOU MAY BE INTERESTED IN:
The shirt is designed for use in hot weather, in combination with the vest. The torso is made of a thin potatobased Jersey and has no unnecessary disturbing details (pockets, etcp.), and sleeves – standard durable blended fabric. Attention! This shirt does not possess flame-retardant properties (FR) Knitted fabric made of fiber COOLMAX® cooling effect, high elasticity in two directions. Good resistance to abrasion compared to many analogues, used in combat shirts (UBACS, FROG, MASSIF ACS, and soD.) Means tight fit. Worn over the head, worn in a gas station Fitted torso, with a reserve in length, elongated in the back – does not get out of press motion Stand-up collar with zip to neck height gradually increases. The lining of the knitted fabric for comfort, and the discharge of sweat. Zipper is covered from inside the entire length of the strap with tricot lining, top is bent to the outside to protect chin Raglan sleeve – shoulders have no seams, are not restrained freedom of movement of hands. The articulated arm bending cut Boost elbow pads convex anatomical shape of NYCO fabric coated on its surface abrasion resistant coating based on PVC in the form of pimples. Bumps significantly increase the strength of the fabric to abrasion and prevent slipping of elbows when it stops in a smooth surface The ability to install under boost elbows elbows D3O or similar polyethylene foam inserts own production (supplied). The entrance is for installation/extraction of the inserts located on the underside of the sleeves and does not use for these purposes the usual Velcro. This protects the cover from getting into the garbage and sand and makes the retention of the inserts is safer On the shoulders pockets vertical zippered tractor. Voluminous pockets, pleated bottom and back. Large Velcro for attachment of insignia. Sewn loops on the bottom for water drainage Included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance Underarm inserts a large area of the Jersey for ventilation and drainage of sweat Cuff opening with Velcro. At least the extra layers of fabric at the wrists for comfort in hot weather Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes On all zips easy manners of the braid Basic stitches – the knit flat (protects from friction), on the fabric NYCO – chetyrehyarusny overlock with extra stitching for strength, and tie-zigzags in the loaded places Material: Main material: NYCO Rip-stop, 50% cotton, 50% nylon Amplification - NYCO Rip-stop, 50% cotton, 50% nylon, with anti-scratch coating on PVC base Jersey – 83% COOLMAX® polyester, 17% elastane REVIEWS: Review from Green7-62 YOU MAY BE INTERESTED IN:
Upper material - combined: natural chrome leather (thickness 1.4 – 1.6 mm) + high strength fabric made of textured nylon yarn 1000D The lining is a natural abrasion resistant and quickly drying "Cambrel" high density (150 g/m2) Outsole - high-quality elastomer type "Gomma", increased wear resistance (Italy) Method of attaching soles - adhesive Valve ("Language") - deaf, protects the foot from influence of environment (dust, water, dirt) fast lacing Toe cap - Reinforced thermoplastic (TM) The download Hard from TM Arch Support - Metal Sizes 38-47
Jacket: Worn worn outside You can use fanspage Buttons Kick patches on the elbows Waist and bottom adjustable in size by means of a cord Cuffs with putty (tissue box) on the sleeve to protect from dust and dirt Pockets: 2 pockets on the chest and 2 at the bottom of the jacket 2 inner pockets and 2 sleeves Pants: Arrows stitched The loops wide waist belt Reinforcing pads on the knees The bottom of the trousers is adjustable in size by means of a cord The pants bottom with a strap, adjustable in height, which does not allow them to creep up Size range: 32-42 Pockets: 2 side pockets and 2 on the thighs 1 back pocket The material of products: "Standard": 60% cotton; 40% polyester "Rip-stop": 53% cotton; 47% polyester
Staff costume consists of trousers and jacket with long sleeves, made of lightweight fabric that does not crumple, does not fade and does not lose its shape even after numerous washings.
The backpack is equipped with 4 external pockets. The harness consists of a padded shoulder straps of adjustable length, made of a material with a ventilated mesh structure. The shoulder covers comfortek provided for damping vertical oscillations. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 30 liters MATERIALS OXFORD 600 TEX
At camouflage jackets can be used fanspage Stretch tricot n/W gum on the cuffs and waist for comfort Metal front zipper with internal windproof flap Pockets: 2 roomy outer and 1 inner pocket 1 zipped section for pens on the left sleeve Material: Upper material 45-P Shadow - Splav: 100% nylon Twill (Twill) - 100% polyester with coating Insulation: The batting 150 g/m2 Product weight: 44-46/170-176 R-R – 611 g 48-50/170-176 R-R – 721 g 52-54/182-188 R-R – 741 g Plain jackets are recommended in the summer set to form the "Guard" in the offseason
Jacket: Special cut sleeves - Raglan no seams on the shoulder, which always get wet in the first place Central zip with weatherproof zipper, closed the valve Hood, adjustable oval face Waist and bottom of sleeves on an elastic band The bottom adjusts to fit with cord Taped seams Pockets: 2 external pockets 2 inside pockets Pants: Elastic band belt Gum lower legs 2 on the hips, close the valves on the buttons Taped seams Material products: 100% polyester 5000 Product weight (jacket): 44-46/170-176 p-p – 509 g 48-50/170-176 p-p – 527 g 52-54/170-176 R-R – 528 g 56-58/182-188 p-p – 573 g Product weight (pants): 44-46/170-176 p-p – 292 g 48-50/170-176 R-R – 313 g 52-54/170-176 R-R – 331 g 56-58/182-188 p-p – 369 g YOU MAY BE INTERESTED IN:
LIGHTWEIGHT SHOES WITH HIGH BERTSAMI Top combo: natural chrome leather (1.4 – 1.6 mm) + high strength fabric textured nylon yarn 1000D Lining: nonwoven abrasion resistant and quickly drying(high-density 150g/m.square). Sole: TEP (±40°C), BUTEK 4. Method of attaching soles: adhesive. Arch support: metal Toe and heel: from reinforced thermoplastic material. Dimensions: 38-47. Deaf valve protects the foot from impact the environment(dust,dirt). Speed lacing. Padded collar. Color combo: black + camouflage figure. Weight: 540 gr.
The classic model. Lightweight casual shoes with breathable uppers and rubber soles, retained the design of the first models, but received the original camouflage color Top of durable breathable fabric Cloth interior trim Soft inner insole made from foam rubber Thin walls and tongue Holes for ventilation Rubber sole Flat lacing with metal eyelets Flexible rubber sole Double decorative stitching as decoration For Soviet youth sneakers were basic and lovely shoes. It was considered the best sneakers "Two goals", which were manufactured in China and (get skeptical smileys) have been really durable and hardwearing. Lucky from basketball sections had two pairs of these sneakers – white for racing and blue for training. However, in the Soviet Union, the sneakers were only after "the Sixth world festival of youth and students" held in 1957, although their story began somewhat earlier. Initially, canvas with rubber soles were invented in the UK to explore the beach. In the beginning of the XX century"U.S. Rubber Company" the US has developed a model of athletic shoes for playing basketball, which he called Keds. In 1917 appeared the first model Converse All-Star, and with the time of the famous basketball player Chuck Taylor, who took an active part in advertising the sneakers became the most popular sports shoes, which later fell nonconformists. By the way, becoming the face of the company "Converse" Chuck Taylor immortalized and his name – sneakers "Chuck Taylor All-Stars" and now are classic shoes in the West.. Appeared trail running shoes with elastic soles and variety of forms were to displace the sneakers, but that didn't happen, and both types exist in parallel, without disturbing each other. Lovers light shoes with thin and flexible sole has received many new models of sneakers, different material of upper and sole. But the classic, repeating the first model remains, attracting, as the combination of weightlessness with paropronitsaemost, and the price.
Size: 5×1,5×20 cm Weight: 40 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Rip-stop Strong, 53% cotton/47% polyester. Quality fabric and durability are superior to dyes original costume Jacket suit from summer field for servicemen sample of 2010, type B (for senior officers). The main differences from type a (for soldiers and officers): use zippers with Velcro instead of buttons on the centre fastener, piping brim cloth braid instead of the overlock on the wrong side of the jacket, longer pleats on the back Central zipper, covered on the outside strap with Velcro Overhead flat chest pockets with flaps with Velcro Overhead flat pockets on sleeves with Velcro flaps Strengthen the elbow pads of the second layer of tissue Cuffs fastened with a cloth pieces with Velcro Shoulder straps with Velcro: one in the center of the chest, one on top of the pocket on the left sleeve. Fanspage included Internal pocket for documents with Velcro flap, water resistant fabric Underarm ventilation slits, closed with synthetic mesh Loop hanger on the collar from the inside YOU MAY BE INTERESTED IN:
The classical model of the armed forces Worn worn outside You can use fanspage Zipper The belt is adjustable in size using the side elastics Pockets: 4 external pockets 2 inside pockets Materials: 100% cotton YOU MAY BE INTERESTED IN: Officers at all times sacredly cherished the honor of the uniform. On the courts of officer honour were legendary, and the word of the officer constituted irrefutable proof. Introducing "Jacket and field officer". Made of breathable cotton fabric, the form is not tiring in the heat or motion and irritate the skin. Shaped jacket with zippers worn outside their trousers. Four outside and two inside pockets allow to place all necessary. Provided the use of fanspage. The belt is adjustable. Classic wide with three pockets and belt officers belt. We hope that the "Jacket and field officer" little to do you harsh everyday life.
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerClassic bib with sewn pockets under the gear Rifleman Adjustable in size from 46 to 68, whatever the growth Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings Simple X-shaped webbing from a wide sling, crossed behind the. Sewn on front, back at sides fastened 50 mm testexam Duraflex®. The extra ends of the sling collapsed hiding under the ring from the gum The wide belt slings, fastens with 50 mm fastex Duraflex®. The extra end of lines in collapsed view hides under the ring out of the gum. Can accommodate additional equipment (for example, the pouch under the reset stores) On the underside of the sewn loops for releasably attaching the unloading/pistol belt 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme pockets sewn to the bib so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets under the VOG-25/VOG-25P, each with a capacity for 2 shots. The individual shots are held inside in the stretch cells. You can use the pocket for other items (e.g., hand grenades or things) 2 pockets under the VOG-25/VOG-25P, each holds 1 shot 2 pockets for bayonet-knife, or 1 of the CPR. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. 3 pockets for hand grenades (2 sewn on the sides, 1 on the left shoulder strap front). Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 large pocket for flat items (map, scarf, etcp.) with the entrance at the top Total saturation: 1) 8 stores the AKM/AK-74 or 4 RPK/RPK-74 2) 10 VOG-25/VOG-25P 3) 1-bayonet 4) 3 or 4 (without the bayonet) RSP 5) 3 hand grenades REVIEWS:  Custom modification from Vladislav Boychuk (tankist_sssr) Review DragunBreath on www.youtube.com (ENG)
Size: 11×7×2.5 cm Weight: 51 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Volume: 20 l The size of the main compartment (W×h×T): 21×44×16 cm Front pocket size (W×h×T): 21×19×5 cm Side pocket size (W×h×T): 16×35×6.5 cm Accessories: Duraflex Main fabric: 600D Polyester Weight: 0.95 kg Main fabric: Cordura® 1000D Weight: 1,10 kg Urban tactical backpack Non-removable shoulder straps with anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches. Removable chest coupler included Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation. Inside is a pocket for removable insertion of very hard foam (included) and a flat zippered pocket for documents All exterior area of the container covered slings MOLLE Removable wide belt slings Two side pockets with zippers, the dimensions are perfect for carrying bottles External zipper pocket with organization inside a simple Compatible with drinking systems to the main compartment there is a pocket on the back for volume (up to 3l inclusive) and a valve for output to the outside of the tube. Drinking system not included! On the outer surface of the upper pockets sewn Velcro large area for placement of chevrons and name tapes Removable logo with Velcro REVIEWS: The review on the website "Russel"
Patent No. 46636. Jacket from the upgraded version of the Soviet hopping suit for special forces, known as "Mabuta". It is recommended for security services Free, not hampering the cut Jacket is worn tucked in or worn outside You can use fanspage (shoulder straps fastened with Velcro) Central front zip, collar with buttons. The bottom of the jacket fastens with a button, removing the load from lightning Kick patches on the elbows Pleats at the elbows for anatomical cut The belt of the jacket is adjustable with side contractions Cuff buttons, two positions to adjust Used stainless button Jacket chest pockets with top entry zipper. Zipper secure strap On the shoulders pockets with Velcro for STI Inside of the heart pocket for documents made of waterproof material. Entrance Velcro cusp edges to protect from moisture At the base of the collar on the reverse side a sewn-in loop hanger Material: "Rip-stop": 53% cotton; 47% polyester "Gretta": 53% cotton; 47% polyester "Standard": 60% cotton; 40% polyester Product weight: 46/176 R-R – 512 g 50/176-p – 612 g 54/182 p-p – 745 g 58/188 p-p – 794 g SIZE: Download Dimensional grid (.xls) to accurately determine the correct size YOU MAY BE INTERESTED IN:
Size: 7×3×15 cm Weight: 34 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 10×7×5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBackup pouch for hand grenades, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Inside the pouch there is a pocket for the fuse and loop of the slings to arm grenades Lining - fabric Oxford 210d (100% nylon) The top of the pouch is reinforced with an overlay from straps to protect against wiping the fuse In the front wall and the bottom of the pouch enclosing the box of wide thick straps. It supports the shape of the pouch, allowing for easy installation and retrieval of a grenade At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Discharge classic vest with sewn pockets for gear Rifleman and cells PALS for mounting additional pouches Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings The jacket fastens with a zipper reinforced tractor long skill of braiding. Zipper for secure closed with a strap with Velcro to protect from pollution and removal of the load On the underside of the sewn loops for releasably attaching the unloading/pistol belt Adjusting the size of vest (from 46 to 68) is located on the sides of the lumbar panel and are made using slings and trendeleva buckles Duraflex®, you can adjust the size directly into put on the vest. With each side on three lines. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum Adjustment increase (from 164 to 200 cm) is located on the bottom edge of the Basque is back and with two vertical lines and trendeleva buckles Duraflex® connecting the yoke and lumbar panel. You can set up right for wearing on a vest. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum On top of the flirt-stitched loop slings evacuation and PALS – 6 cells in width, 3 rows in height slings (sewn completely to each other without gaps) On lumbar panel stitched two semi-rings Duraflex® suspension with bread bags on hooks-carabiners and slings PALS – 6 cells in width, and 7 rows in height slings (sewn completely to each other without gaps) Top stitched at shoulders limiters and automatic belt PALS webbing on each shoulder by 2 cells wide, 2 rows of lines in height (with the period) 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme vest pocket sewn to the base so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets for hand grenades on his chest. Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 pocket for fireworks on the right side of the trunk. Open top with elastic walls to protect contents from falling out, to carry 3 RB, or 1 RAD or 1 RDG 1 pocket for the bayonet on the left side of the trunk. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. Can be used for carrying 1 RAD or 1 RDG Pocket for fitting of the rubber bands with a buckle on the button, on the left side of the chest near the main zipper Pocket for personal dosimeter on the right side of the trunk near the main zipper and open top 2 inner pockets for flat items (map, scarf, etcp.) with the input of Velcro, provide short-term protection from moisture On the sides of the torso stitched PALS webbing on each side for 3 cells in width, 3 rows of lines in height (with the period)
Classic gate under the throat Strengthening overlays on shoulders and elbows Shoulder straps Chest pocket Material: Wool - 30 % PAN (polyacrylonitrile) - 70 % Product weight: 46 R-R – 615 g 50 R-R – 715 g 54 R-R – 715 g 58 R-R – 747 g
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 108 g Size: 21,5×9,5×6.5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two magazines for AK74 Velcro and snap button. More simple and inexpensive alternative to the Pouch for 2 MAG. AK Velcro adjustable Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged 50 mm sewn-in elastic band. Thanks to the same two stores in the pouch do not knock into each other, and one remaining shop is not loose. The elastic band is located well below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. valve offset) Additional insurance of valve metal button. The button is to be fastened in only one position – at 2 shops At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter to secure At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Volume: 35 l (including side pockets and valve) Weight: 1.25 kg Main compartment (W××T): 31×55×18 cm Side pocket (2 PCs) (W××T): 16×27×6.5 cm Pocket flap (W××T): 22×15×6.5 cm Main fabric: 600D Polyester Accessories: Duraflex Classic three-day backpack Non-removable shoulder straps with anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation All exterior area covered backpack MOLLE straps Removable wide belt slings Side pockets with zip fastening volume lacing Fixed valve, volumetric external zippered compartment, an additional flat zipper pocket for documents on the inside of the valve The point of attachment of the cargo on the flap with removable ties Additional fixing points of the cargo at the bottom
The classic model, straight cut Material: 100% Cotton Product weight: 44 R-R – 105 g 48 R-R – 117 g 52 R-R – 119 g 56 R-R – 121 g
Volume: 60 l Weight: 2,36 kg Main compartment (W××T): 38×75×20 cm Pocket flap (W××T): 30×20×9 cm Main fabric: 600D Polyester Accessories: Duraflex RAID backpack for long treks. The classic tourist model, adapted for military use Removable, adjustable straps. Large width, anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation. Inside vertical pockets for removable armour. The back has the correct anatomical form A single full frame from the lines, the reinforced design of the bottom attachment straps All exterior area covered backpack MOLLE straps On the front of the valve pocket to the outside attached double-sided badge. One side is for the identity (transparent pocket), and the other reflective. Name badge fastens with Velcro, it also can be used for the chevrons. Included removable logo Velcro Removable wide belt. Side delays, cell MOLLE for attachment of pouches Lower side pockets-emphasis with adjustable volume control Tube with two contractions and two compression straps Removable height-adjustable volume valve with external zip pocket The set includes the protector, located in a separate pocket of the valve The point of attachment of the cargo on the bottom and the valve
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 140 g Size: 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Replaces Pouch for 2 MAG. AK Velcro adjustable, having a number of improvements. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Perfect for shopping M4 mounted with the manners of MAGPUL® ORIGINAL The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks a minimum of 5 cm of height of the store, which is convenient for its removal Dimensions are spacious enough for easy insertion and removal of stores, including property cover down The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much stronger than ordinary wide elastic bands, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely hold one or two stores In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted vertically) The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve At the end of the valve is long (8 cm) skill of slings with a thickening at the end, for the convenience of unzipping the pouch even in thick gloves All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance All of the Velcro is sewn in two passes around the perimeter or optionally diagonally for a secure At the bottom there is a grommet for drainage water
The classic model for warm weather
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×10×3.5 cm Weight: 90 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: The UniClick system of the third generation Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches, 2 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Weight: 133 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerShingle under 8 and 10 charging shops saiga-12 or Vepr-12 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height Attention! The top line on the back of the pouch, contrasting different color from the rest of the sling UniClick, not involved in the installation of the pouch and is used for fastening the clasp of the pouch The pouch is designed for snug fit store. It is recommended to place shop cover up Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around a contrasting sling). Length of cord with a margin that takes into account the height of the 10 round magazines saiga-12 or Vepr-12 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers This skill pouch wider compared to the automatic counterparts due to large size shops 12 gauge Removable adjustable utyazhka of 4 mm elastic cord that spans across the store. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pocket of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the store, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 3 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when hanging over them the same single, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of the store without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Material: Cordura® 1060d (100% nylon) Size: 21,5×8,5×5.5 cm Weight: 164 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 2 shops AK, on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height Holds two magazines of AK-74 or AK-47 Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Lining - fabric Oxford 210d (100% nylon) In the front wall of the pouch sewn hard plastic insert. It supports the shape of the pouch, allowing for easy installation and extraction of shops The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores Inside you can set the delimiter shops (Velcro fastening), the delimiter is included in the package At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Classic style The loops wide waist belt Two front and one back pocket closed by flap and snap Material: 100% cotton
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 135 g Size: 14,5×16,5×6 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with zipper with internal organization, square shape. The numbers in the title (4×2) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is perfect little organizer for handling systems and for PALS/MOLLE backpacks zones (zone must be a minimum of 4 cells PALS in width). The pouch is specially designed to be compatible with backpacks of manufacturing the Alloy Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall two volume pockets for small items, on the front wall one large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Size: 16×7×2.5 cm Weight: 62 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 20-cartridge shop BCC on silent castle Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Elastic band belt Knitted elastic band on the bottom of the legs Material: 100% cotton Product weight: 44 R-R – 209 g 48 R-R – 211 g 52 R-R – 231 g 54 R-R – 246 g
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 285 g Size: 24×23,5×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Large utility pouch with zipper with internal organization, square shape. The numbers in the name (6×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a sugar on the back and unloading systems as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Size: 6,5×4×16.5 cm Weight: 69 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
A modernized version of the jacket from the U.S. army field ACU form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Removed unnecessary square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro. As in the original kit ACU the number and size of these candies reduced for ease of operation and reducing the number of rubbing elements. The mutual arrangement of reciprocal Velcro has been changed to protect the clothing under the jacket from damage (in the original with an unbuttoned jacket Velcro hook looking in the direction of the body) Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro Most of the Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes. In the original most of the Velcro only sewn in one pass around the perimeter The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance on the left forearm is not closing flat pocket for three pens the set includes removable shoulder straps, fanspage and buttons for fastening. Sutured independently flat chest pockets, and angled, are fastened by a narrow strap. To protect hands and gloves from scratches in your pocket used Velcro tape-hook, and on the flap – Velcro-loop (in original jacket ACU Vice versa). The dimensions and the angle of the pockets are changed and meet the latest generation of the original American set of ACU Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 125 g Size: 25×10,5×4 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for one 8-round magazines saiga-12 or Vepr-12 with the valve closure and the ability to mount additional pouches on the outer surface Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height The pouch is sewn entirely of two layers of fabric Cordura® 500d From the main compartment of the pouch looks a minimum of 4.5 cm of height of the store, which is convenient for its removal Compared to the old model pouch dimensions are bigger, the stores to the Saiga-12 and Vepr-12 are easy The Velcro closure on the main compartment of the pouch more area than the valve response. This allows reliable (throughout the area of the Velcro) zip up pouch in all cases (valve angle, sloppy or tight buttoning, store lid up or down, loaded or empty, and soD.) Stickies are located as high as possible regarding the store that allows you to shorten the valve (faster access to the store) and free up space below for mounting additional small pouches To secure Velcro sewn around the perimeter and in addition to the diagonals On the edge of the valve sewn long (7 cm) skill of slings with a thickening at the end for easy unzipping of the pouch even in thick gloves The outer surface is sheathed cells PALS for mounting additional pouches. On the front surface 2 cells wide, 2 rows high, on each side surface 1 cell in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Utilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
Set of windproof smoke (jackets) and warm with the liner of Primaloft® insulation Black, which can be worn separately as a standalone jacket Smoke: Can be worn with or without podstezhkoy High and wide of the goal. Hood with visor, which is inserted in the plastic to give rigid form. For careful adjustment of the hood has three adjustment Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper Cuffs with Velcro for fine adjustment of the circumference of the wrist Valve front zipper and pockets fastened with canadian (on tape leg) buttons, which have greater reliability than with conventional buttons. The buttons are large, making them convenient to operate in thick gloves Voluminous pockets on the torso are of the bend entrance, protecting the contents from falling out Pockets: 2 large pockets on the chest 2 large pockets at the bottom of the jacket 2 pocket "Napoleon" with zipper on the chest one flat pocket on the left sleeve and one inner left zip Laces: at the waist and bottom of jacket, with elastic cords for protection against the cold under clothing Undercoat: Quilted lining with insulation that extends the life of clothing (insulation remains in place when cleaning or washing) Fastening to the smoke and buttoning when wearing as a separate jacket, are made with the help of convenient lenticular buttons of the American model Hood, adjustable oval face. For comfortable wear the inner part of the hood trimmed with fleece Vents on the armpits Knitted cuffs for comfort Inner left pocket zipper The material of products: The main fabric smoke: Strong rip-stop high density (different from the counterpart used in the form of an Alloy), 35% cotton, 65% polyester Lining smoke: thin blended fabric, 35% cotton, 65% polyester The main fabric of the liner: 100% polyester Insulation liner: the torso //forma-odezhda.EN/index.php?route=product/tag&tags=primaloft" title="Primaloft">Primaloft® Black 2×133 g/m2 sleeves //forma-odezhda.EN/index.php?route=product/tag&tags=primaloft" title="Primaloft">Primaloft® Black 2×80 g/m2 Product weight: 46/176 R-R – 1969 50/176 R-R – 2097 g 54/182 R-R – 2181 g 56-58/188 R-R – 2439 g The website also presents the model of pants with insulation //forma-odezhda.EN/index.php?route=product/tag&tags=primaloft" title="Primaloft">Primaloft® YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 205 g Size: 19,5×20×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper with internal organization, square shape. The numbers in the name (5×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a small bread on his back and unloading systems as well as a front organizer for small backpacks with an odd number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Three built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 5 cells in width, 3 rows in height. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall of a large flat pocket, 4 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7_62 Bag for the binoculars from the pouch 5×3 from Green7_62
The classical model of the armed forces Classic style The loops wide waist belt 2 side pockets and 1 back pocket Material: 100% cotton The officers of the army before the revolution piously protected the honor of the uniform. On the courts of officer honour were legendary, and the word of an officer is law and irrefutable proof. Our field officers form honour drop is simply impossible! Introducing "Jacket and field officer". Made of breathable cotton fabric, the form is not tiring in the heat or motion and irritate the skin. Shaped jacket with zippers worn outside their trousers. Four outside and two inside pockets allow to place all necessary. Provided the use of fanspage. The belt is adjustable. Classic wide with three pockets and belt officers belt. We hope that the "Jacket and field officer" little to do you harsh everyday life.
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism Armani on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Fabric with PU coating, water-resistant to more than 2000 mm of water column All seams are taped with a special tape The hood retracts into the collar Comes with waterproof cover Material: Taffeta (Taffeta) 100% polyester with PU coating The weight of the product in the case: 44-46/158-164 R-R – 254 g 44-46/170-176 R-R – 260 g 48-50/170-176 R-R – 267 g 52-54/182-188 R-R – 275 g 52-54/182-188 R-R – 282 g 56-58/182-188 R-R – 291 g SIZE: Download Dimensional grid (.xls) to accurately determine the correct size
Cap the armed forces of the old versions (up to 2010). Complements summer Suit M21 mod-2, rip-stop The lining is cotton calico and faux leather On the underside of the front piece stitched faux leather that protects the forehead from rubbing metal badge Hard visor On the sides small eyelets for ventilation of the head Otkatnye ears
Volume: 15 l The size of the main compartment (W××T): 24×42×13 cm The size of the pocket for drinking system (W××T):24×42×1 cm The size of the top pocket-organizer (W××T): 19,5×17,5×4.5 cm The size of the bottom pocket-organizer (W××T): 19,5×19×4.5 cm Accessories: Duraflex Main fabric: 600D Polyester Weight: 1,10 kg Main fabric: Cordura® 1000D Weight: 1.29 kg Compact one-day tactical backpack in EDC-style Non-removable shoulder straps with anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches. Removable chest coupler included Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation. Inside is a pocket for removable insertion of very hard foam (included) All exterior area of the container covered slings MOLLE Removable wide belt slings Laces with postexam on the sides of the container Two external zipped pockets with complex organization inside for placing small things The main compartment opens to the bottom of the container can be fully disclosed. Inside two big pockets with zipper and flat zippered pocket for documents Compatible with drinking systems – in the back there is a compartment with external access zipper for 2l volume, loop for hanging and two valves on lipuchke to be output to the outside of the tube. Drinking system not included! On the outer surface of the upper pockets sewn Velcro large area for placement of chevrons and name tapes The point of attachment of the cargo at the bottom Removable logo with Velcro REVIEWS: Review the website "Russel"
Material: 100% Cotton Product weight: 52 R-R – 232 g 54 R-R – 265 g
The classic model You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 100% Cotton
The classic model Material: 100% Cotton We say summer – mean t-shirts. Lying on the heated boards of the pier, to run barefoot in the dew, hit the stack with a guitar the Summer... to each his own, but remains a necessary condition. By the undisputed advantages of lightweight, cotton t-shirts, camouflage pattern adds a touch of romance, so rare in its combination with practicality. You don't have every night to wash a t-shirt of the child in the icy water of a mountain stream, or spend the nerves, causing it to do it yourself. Additionally, undetected to get close to any animals at close distance. As long as it was not predatory
Copy of Panama, as the main fabric used tarpaulin (100% cotton) Material: "Canvas"- a tarpaulin (100% cotton) YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 267 g Accessories: Duraflex® Velcro: Alfatex® (Belgium) Size (In×W×T): 25×20×3.5 cm (height given for 8 round magazines saiga/Vepr-12) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 universal pouches for shops shotguns saiga/Vepr different calibers. Replaces several older models with Velcro. Has an adjustable fastening volume, and a removable height-adjustable flaps with Velcro closure. Is the use of pouches without flaps for fast access to shopping. Structurally is an analogue of the Pouch for 2 MAG. AK Velcro adjustable. Production is halted Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The feature of this block of two pouches that when installed on a platform it does not disturb neighboring empty cells in PALS on either side of himself, then as two separate pouch for shops saiga/Vepr partially overlaps adjacent cells, hampering the rest of the rig Attention! Compatible with the following shops: 12 gauge – 8 charger 410 gauge – 10 charger 20 caliber – 8-10 charger The cross section of each pouch in a block is dragged by a large elastic cord type adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without buttoned valve to keep the store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. They support the shape of the pouch and considerably facilitates the introduction and extraction of the shop. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of store inside Pouch fastened with Velcro. The Velcro on the pouch is longer than the valve, to facilitate the configuration of the pouch for a specific store The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops) The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer the pouch to the quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow straps that do not give the top of the shop to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there are eyelets for water drainage REVIEWS: A review on the forum Gunsforum.com
Volume: 40 l Weight: 1.7 kg Main compartment (W×h×T): 30×50×19 cm Upper front pocket (W×h×T): 21×21×6 cm Side pocket (2 PCs) (W×h×T): 12×37×7 cm Main fabric: 600D Polyester Accessories: Duraflex Modern amphibious container volume 40 l Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation Non-removable shoulder straps with anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches Front volume zipper pocket with dimensions calculated at domestic army pot (also fits SHAQ). Pocket sewn on Velcro for attaching personalized ribbons and chevrons. Included removable logo Velcro Removable wide belt. Side delays, cell MOLLE for attachment of pouches Reinforced bottom Exterior area under the front covered pocket backpack MOLLE straps Two big side pockets, unbutton over the entire height Laces with postexam on the sides of the container Two removable ties at the bottom and at the top of the pack for extra cargo Reinforced handle for loading/carrying backpack It is possible to use complete with protective cover (45×63×20)
Fastened to a special stand under collar Volume allows you to put on a fur hat Material: Oxford (Oxford) - 100% nylon with coating Insulation: Polyester 135 g/m2
Size back walls: 28×18 cm The size of the main compartment: 26×16×9 cm Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 356 g Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun tape. Improved model replacing the old one Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Fixed geometry of mutual arrangement of clips horizontally corresponds to the cells in the PALS of a width of 37 mm instead of the old 35 mm, so the pouch is installed on the last generation platforms, and foreign Alloy products without deformation The pouch fastens with Duraflex®, ability to adjust. Belt is stitched from the bottom to the top, forming a power frame Cover with sides to protect the content from moisture and dirt. Its design has been improved compared to the old model The dimensions of the main compartment of the pouch is reduced compared to the old model for a more tight fit In the walls of the pouch between the layers of fabric sewn hard plastic inserts. They maintain the shape of the pouch, facilitating the introduction and extraction of the box. Also thanks to this convenient to use with cartridge belts without box Outer side surface is sheathed cells PALS for mounting additional pouches (three rows of two cells on each side) The pouch is sewn entirely of two layers of fabric Cordura® 500d At the bottom of the inside reinforcement of 60 mm slings to protect from rubbing lever cover lock boxes On the side near the bottom has a grommet for drainage water All edges of the fabric and the ends of the sling is turned over or hidden in the seams for reliability and neat appearance REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 24,5×22×12 cm Weight: 506 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Classic bread bag (butt pack). Discontinued, replaced by the v bag of Crackers.2 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height The bag is equipped with a tube of light fabric Oxford 210d tightly laced paracord and lock Duraflex® The flap fastens with two fastex Duraflex®, with the possibility of tightening. On the valve there is a carry handle The bag is equipped with contractions from a sling with tehsilimi buckles Duraflex® for attachment of additional equipment (e.g. sleeping Mat), twin flap top, two on the bottom below Rings of elastic bands for fixing the superfluous ends of lines of all contractions Lining – fabric Oxford 210d. In the side walls sewn-in plastic inserts to maintain the shape (for example, when carrying machine-gun belts) Two semi-rings Duraflex® suspension straps to the CPF The outer surface is sheathed cells PALS for mounting additional pouches At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? Forum discussion YOU MAY BE INTERESTED IN:
The classic model You can use shoulder straps Worn worn outside The belt is adjustable by means of side elastic bands 2 pockets on the chest Material: 100% Cotton
Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 25,5×22×9 cm Size collapsed: 10×13×5.5 cm Weight: 165 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for reset empty shops Rollypoly type, if necessary, transforming into a small bundle. Attention! On sale are the old version with the constructive differences and similar features. The photo in the catalog currently shows the old version Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Pouch when expanded accommodates up to 8 stores AKM/AK-74 and 5 shops saiga/Vepr-12 for 8 rounds A Velcro flap, with a very long skill of lines (possible to work in thick winter gloves), fastened in three positions - holds folded, idly fastened to the inner wall of the pouch or used to close the top of the pouch The neck of the pouch is dragged paracord and two latches Duraflex® to reduce the risk of loss of stores Velcro sewn around the perimeter and in addition to the diagonals All the tissue sections and a sling hidden under the edging or seams for reliability and neat appearance At the bottom there is a grommet for water drainage. Its installation is reinforced with a piece of webbing for protection from ejection REVIEWS: Review from k-a-r-d-e-n
Is put on a fabric collar and is fastened by buttons to the coat
Classic gate under the throat Material: Wool - 30 % PAN (polyacrylonitrile) - 70 % Product weight: 48 R-R – 637 g 50 R-R – 642 g 52 R-R – 676 g 54 R-R – 713 g
The classic model of the military with low tilted fields short Hard stitched fields Cord with easy locking mechanism Small eyelets on the sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.) Material: Rip-stop, 100% cotton Lining: cotton calico
A copy of the Cap summer M2 as the main fabric used tarpaulin (100% cotton) Material: 100% cotton YOU MAY BE INTERESTED IN:
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Material: Cordura® 500d (100% nylon) Weight: 182 g Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. It is recommended to carry the burner, JetBoil Sumo. Improved model replacing the old one. Structurally, it is a full analogue of the small Pouch on the rear fastex but with other dimensions (and higher) Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable At the top of the valve from the inside sewn small flat pocket with Velcro for kit anti-fog films for the lenses of a gas mask. On the new model Velcro sewn reinforced way, added skill of slings for easy opening The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are offset from the old position and stitched in a classical way (with an interval between the rows of wide slings). Just three rows in height (in the old version of the pouch – two). Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling Uniclick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion
REVIEWS: Review the website "Russel"
Material: 94% Cotton 6% Spandex
Backpack beaver 55l (Prival) multi-functional, comfortable and robust backpack designed for active recreation, fishing, hunting.Consists of one main compartment with two entrances, which can be divided into two parts: upper and lower special internal baffle on the zip. The outside of the backpack has two side pockets and one front. The pockets are designed with a fold valves, preventing loss of items and creates an additional protection from moisture. In the pockets and the bottom of the backpack there is a system of holes-drains, to drain water. In the flap of the backpack has a roomy zippered pocket. Specially sewn slings in a valve, the bottom and the straps of the backpack allows to place additional outboard equipment. Chest and waist tie will secure the backpack and will reduce the load on the back. The backpack is easily adjusted by volume. Features: Purpose: for hunting, fishing Execution: soft Straps: 2 PCs Type: unisex Weight: 900 gr Height: 56 cm Width: 33 cm Thickness: 23 cm Volume: 55 litres Capacity: up to 10 kg Fabric: 100% polyamide Fabric of bottom: 100% polyamide Color: the CMB digital Key features Type: unisex for hunting and fishing Suspension system: soft framework, chest coupler, zone belt Volume: 55 litres, maximum load 10 kg Side screed: no Weight: 0.9 kg Dimensions (Wksht): 56х33х23 cm Functionality The top flap: there, with a pocket Additional access: the lower entrance(with a partition in the main compartment) Pockets: side pockets, front pocket Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Multifunctional accessory, made on seamless technology, protects against sun rays and wind The fabric dries quickly, ideal for active sports A large number of rascvetok and use cases allow the use of MULTI-bandana as a fashion accessory that complements any suit Materials: 100% modified polyester Size in flat form: 25×47 cm Weight - 35 g Use cases: Manual: It is possible to use as a retention bandage: REVIEWS: The review on the website "Russel" Review from Green7-62
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 127 g Size: 16×15×9 cm Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall rear pouch for the insert buckle. Improved model replacing the old one. Can be used for carrying drum shops of the PKK. Structurally, it is a full analogue of the Pouch under the mask/the Luggage, but with different dimensions (wider and shorter). Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable The outer surface is sheathed cells PALS for mounting additional pouches. In the new model series PALS are more rational – they are biased upwards relative to the old position and stitched in a classical way (with an interval between the rows of wide slings). Just two rows in height. Cell width 37 mm instead of the old 35 mm Pouch sewn entirely from a lighter fabric Cordura® 500d instead of the old version 1060d All edges are fabric edged for reliability and neat appearance All the ends of the sling UniClick and PALS hidden under the edging At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 113 g Size (In×W×T): 17,5×14×6.5 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carry case Patriotic army of 800 ml flasks, on the button Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Valve with a hole in the center for the lid of the jar, completely covering the top (except the cover). Fastens with a button that is hidden under the surface of the valve to protect against pullout and flare with the abrasion of the coating. Handy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Size: 13,5×6×19 cm Weight: 184 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with zipper, without the possibility of a quick removal. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The pouch fastens with two-way zipper convenient manners. Zipper opens to the bottom, the opening angle is regulated by a removable system of two cords and jumper Duraflex®. The zipper is sewn with double stitching The inside top half of the pouch is closed around the perimeter of the mesh on a thin zipper. Under the grid is a flat pocket (handy for large packages), and three rows of narrow elastic cells At the bottom of the pouch cell is 50 mm gum Inside the lower half of the pouch is a tabbed pane with flat pockets of light fabric Oxford 210d. The panel expands in lateral directions All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 54 g Size (In×W×T): A 14.5×8×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSimple Velcro for carrying IPP (individual dressing packets). Fits the most popular domestic and foreign IPP Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height A Velcro flap with the easy skill of slings At the bottom there is a grommet for drainage water REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 281 g The size of the pouch separately: 16,5×13×7 cm The size of the open platform: 40×14 cm Lightning: SBS® Accessories: Duraflex® * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch-kit (medicines not included) with the possibility of rapid separation of equipment (vest, RPS, bib) separately for use in an emergency and for more convenient access to content. Can also be used as an organizer medium size Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height The product consists of two parts – the platform and pouch The platform is an oval detail of two layers of fabric, rear – mount UniClick Plus, on the front large Velcro area for attaching pouch. The top and bottom of the pouch obkladyvaetsja valves platform, sostarivaniya by Duraflex fastex® with adjustable ring and elastic for tucking the excess end of the line If you removed the pouch interfere with the valves of the platform can be attached to the center with Velcro (see the photo in the catalog) For convenient separation and transportation of the pouch on top of its rear wall sewn loop of webbing. It covers the upper valve of the platform and is at hand in the undoing of fastex The pouch fastens with a large (type 10) two-way zipper with the manners of paracord instead of the metal reeds (silently and reliably). Zipper opens to the bottom of the pouch is disclosed by 180° On the top half of the pouch is a loop of braid for hanging lantern etc. items, flat pocket with top entry and two equal horizontal bands of double-layered, the first layer – 50 mm elastic the entire width of the pouch, the second layer – 25 mm gum divided into three cells On the bottom half of the pouch is voluminous mesh pocket with zipper for small drugs in all directions. Mesh allows you to see the contents, unlike the transparent film is not dubeet in the cold. The vertical zipper, unbuttoned when opened 180° the pouch from the top down (not dropped small items) and is located under the right hand. On top of the mesh pocket sewn vertical double-layer elastic band, the first layer – 50 mm elastic band divided into two cells (1/3 and 2/3 of the height of the pouch), the second layer – 25 mm gum divided into three cells. Place of sewing elastic bands to the mesh reinforced with webbing for secure At the bottom of the pouch cell is 50 mm gum For visual recognition of the first aid kits on the front wall of a pouch stitched cross straps contrasting to the fabric color. The same color is used for slings and fastex on the platform, which together with horizontal webbing on the pouch also form a contrast cross. First aid kit in the colors Black olive used slings and fastex on the pouches in the colors olive, Woodland, Digital flora, Coyote Brown, used black webbing and fastex All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom of the pouch has a grommet for drainage water REVIEWS:
Multifunctional light and compact backpack "Kuzmich-45" CMB (Prival) with a maximum capacity of 55 l intended for tourists, hunters and fishermen. Comfortable molded backrest makes it a comfortable wear, and the compactness and relative simplicity provides a good mobility. The cloth material of the backpack does not absorb moisture, so you can not be afraid that the Luggage will get wet. On the sides "Kuzmich-45" the CMB is equipped with two large outer pockets with lockable zippers dochazkove, providing quick and convenient access to frequently used items. The backpack has a convenient large carrying handle and a floating top pocket flap for small items (also with dochazkove lightning).Features: Purpose: for hunting and fishing Execution: anatomical Type: unisex Straps: 2 PCs Weight: 800 gr Height from 25 cm to 50 cm Width 30 cm Thickness 25 cm Volume : 45 liters Capacity:  up to 30 kg Fabric: Poly Oxford 600D PU RipStop Fabric of bottom: black PU Poly Oxford 600 Color: camo digital, camo forest Options: Side pockets Side screed The upper valve Top pocket: there Key features Type: unisex for hunting and fishing Suspension system: soft frame Volume: 45 l Side screed: there Weight: 0.75 kg Dimensions (Wksht): 50х25х20 cm Functionality The top flap: there, with a pocket Pockets: side pockets Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Classic sleeping bag Insulated protective Podlaska zipper Lightning split bilateral Neck sleeping bag is dragged by a cord with locking mechanism Sleeping bag can be completely unbutton and used as blankets The ability to sostenute sleeping bags Attention! Long-term storage in a compressed form is not recommended. Packing in compression bag should be made arbitrarily crushing the sleeping bag, and not gently rolling, K. with minimal deformation of the insulation FEATURES: Use temperature: Comfort: +10... +5° C Extreme: -6° C Dimensions and weight: Dimensions: 190×80 cm Dimensions in packaged form: Ř 21 x 37 cm Weight: 1.9 kg Materials: Outer fabric: Polyester Taffeta 190T Inner fabric: Polyester Ponge Silk Touch Insulation: Shelter Soft Density of insulation: 300 g/m2
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 92 g Size (In×W×T): 12,5×9×3 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall pouch-kit (medicines not included!), opens sideways, attached on a strap discharge systems or backpacks Mount: two removable clip on the button in the kit. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height The pouch opens to the side. Through the use of removable clips in the pouch you can choose the direction of opening (left/right)K. may be turned upside down. Clip and it should look the button down (in this case, the fastening is more reliable) In the IPP is placed, the tourniquet/tourniquet and a few syringe-tubes (for them near the entrance to the small pouch sewn elastic cell) A Velcro flap, with the easy skill of slings Lining fabric 210d Oxford In a rear wall enclosing a piece of plastic to maintain rigidity Top and bottom available in grommet for drainage of water (the grommet at the bottom of the pouch) REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Utyazhka on the bottom of the grid With additional frame mesh does not touch the face
Classic simple sleeping bag Type of construction: blanket Lightning: detachable, two-way Sleeping bag can be completely unbutton and used as blankets Available in versions with right and left zipper that allows you to connect the sleeping bags between each other Attention! long-term storage in a compressed form is not recommended Use temperature: Comfort: +12... +7° C Extreme: -3° C Dimensions and weight: Dimensions: 200×80 cm Dimensions in packaged form: ∅19×37 cm Minimum weight: 1,46 kg Materials: Outer fabric: Polyester 70D/190T W/R Cire Inner fabric: Polyester 70D/190T W/R Cire Insulation: Hollow Fiber Density of insulation: 200 g/m2 For sleeping bags in the colors of "digital flora": Outer fabric: Polyester Taffeta 210 R/S Inner fabric: Polyester Ponge Silk Touch
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 132 g Size (In×W×T): 22×9×6.5 cm (height given is for the AK-74) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for two 30-minute charger stores AK74 or AKM. Has an adjustable fastening and a detachable volume-adjustable height Velcro flap. There is the possibility of using the pouch without flap for quick access to shopping. Discontinued, replaced with magazine Pouch for 2 MAG. AK Velcro adjustable v.2 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to three horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The cross section of the pouch is dragged elastic cord large type with adjustable clamp Duraflex®. The cord is much more reliable in terms of wear than a regular wide rubber band, you can customize it or completely remove it maintainable. Due to the tightening pouch can even without a valve fastened securely retain two and one store In the front wall of the pouch between the two layers of fabric sewn with a piece of plastic. It supports the shape of the pouch and considerably facilitates the introduction and extraction of the shops. In addition, the hard plastic does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible square Velcro equally well for the two stores, and one (T.K. the valve is shifted). The valve is fastened by Velcro on the inside of the rear wall of the pouch. The place is fasten, you can choose the height, thus adjusts the height of the pouch in a closed form (for different types of shops). It is recommended to adjust the valve so that the top edge of the Velcro valve coincides with the upper edge of the response of the Velcro on the pouch to buckle the pouch with two magazines inside. When it is released, the valve might need an additional tool, such as a metal ruler, which should be placed between mating Velcro The valve is fastened additionally by a horizontal strap at the top of the pouch, she plays the role protivovirusnogo element. Also this sling can be added to the end of the valve to quickly transfer mode quick access to the shops (see the photo in the catalog), it will not get in the way. Both ends of the valve is narrowed for easier prosovyvaniya under sling In the center of the valve from the inside sewn 25 mm Velcro-allows you to fold and fasten the valve to itself, if it is not used (fast access to shops) The edges of the valve from the inside sewn narrow lines, not giving angular the top stores AKM to slip out sideways from under the valve and stiffen the edges of the valve The pouch is sewn entirely of two layers of fabric Cordura® 500d All fabric edges are hidden under seams or edged for reliability and neat appearance All the ends of the sling Uniclick hidden under the edging or seams All of the Velcro is sewn in two passes around the perimeter to secure. Wide Velcro additionally sewn diagonally in two passes At the bottom there is a grommet for drainage water REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 143 g Size (In×W×T): 17×19×12.5 cm Pouch for Russian army bowler. Also fits the Swedish army pot (SHAQ). Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height The pouch fastens with Duraflex®, adjustable Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt On the front wall sewn two horizontal density volume tehsilimi buckles Duraflex® All the tissue sections and lines edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Multifunction backpack "SCOUT 25-Oxf CMB-number" (Prival) is intended for tourists, hunters, fishermen. Comfortable, soft, molded backrest makes it a comfortable wear. The backpack has one large roomy compartment with two tie rods, two outer pockets, an inner pocket for small items in the upper valve. All straps on the backpack is made of genuine leather. Features Purpose: For hunting and fishing Execution: Anatomical Chest coupler: there Waist belt: there Valve: there; with a pocket for small items Straps: 2 PCs Type: unisex Weight: 680 gr Volume: 25 liters Load capacity : up to 15 kg Fabric: 600D Oxford Fabric of bottom: Cordura Color: the CMB figure Key features Type: unisex for hunting and fishing Suspension system: anatomical, chest coupler, zone belt Volume: 25 l Side screed: no Weight: 0.68 kg Functionality The top flap: there Pockets: side pockets Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case aluminum combined pot with a jar for VDV, buttons Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
The third generation of the TSU trousers with a number of improvements based on feedback The cut is based on the ACU trousers The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places All the Velcro sewn in to secure the perimeter and diagonals. Loaded hand stitched in two or three passes. Velcro on all the pockets are oriented so that the least scratch up and ruin gloves Fit is more loose compared to the TSU-2. On the sides of the knees there are small Darts for articulation Wide belt loops under his belt Utyazhka waist and the cord can optionally retrieve Zipper fly, belt fastens with a button standard American standard The fastening of the side pockets elastic cord with lock. If necessary (for example, the wearing of trousers tucked into boots) and a cord retainer can be removed Pockets: Deep side inset pockets with rounded corners at the bottom to reduce clogging. Hidden sewn inside the top loop of synthetic cord for hanging keys etcp. items Overhead cargo pockets large volume fastened by Velcro. The pockets include internal organization in the form of several big pockets of light fabric, which top pulled sewn-in elastic band for better fixation of the content. On the right and the left Trouser leg width and number of pockets is different (see the photo in the catalog). These pockets are convenient for placing small items (pocket knives, multitools, flashlights, lighters, electronics, etcp.). Under the flap of each pouch sewn loop of cord for hanging carabiners Pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position Rear inset pockets with Velcro closure. The bottom corners are rounded for less clogging Strengthen (them lining fabric Nylon Supplex): The lower part of the entrance to a side inset pockets reinforced on the outside and on the inside to protect from rubbing clips of folding knives The knees are reinforced lining fabric Nylon Supplex with possibility of installation inside a protective shock-absorbing inserts-pads. Included with the pants are polyethylene foam protective insert. Compatible with knee inserts firm D3O following models: T5, T5.1S, T6, TRUST. Double-safe clasp that protects the knee pad from falling out – a wide Velcro strap and a hidden pocket-emphasis for the lower edge of the insert The bottom of the trousers with the inner side reinforced overlay from rubbing when wearing over shoes Strengthening of rectangular shape in the seat, a large area Material : NYCO Rip-stop, 50% cotton, 50% nylon Amplification – 100% nylon Supplex fabric Nylon rip-stop THAT-WR 500. Light, silent, breathable and very durable for its light weight SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Weight: 127 g Size (In×W×T): 16×14×7 cm (without lid jar) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerInsulated carrying case American military odnomarshevoy the plastic jar (Plastic One Quart Military Canteen), on the buttons. Suitable for various commercial analogues jar, bottle Nalgene OASIS 1qt canteen and TR M-1000 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height All except valve is a sandwich of fabric Cordura® 500d, soft foam for insulation and keeping fit, and lightweight 210d Oxford lining The entrance to Podrabinek for better retention jar Two valves completely cover the top sides of the cover. Each valve closes on a button At the bottom there is a grommet for drainage water Attention! The pouch implies tight jar. Original American flask, bottle Nalgene OASIS 1qt canteen and TR M-1000 is tight, the jar with the original pot-Cup holder (Canteen Cup) does not fit REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Copy of Panama M45, as the main fabric used tarpaulin (100% cotton) Material: 100% cotton YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 200 g Size: 14,5×23,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch zipper internal structure horizontally oriented. The numbers in the name (6×2) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch perfect organizer for unloading systems, a simple belt from a small sling backpacks, as well as a front organizer for backpacks with an even number of cells in the front (then the pouch is placed symmetrically in the center) Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells in width and two horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper The outer surface is sheathed cells PALS for mounting additional pouches, 6 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Internal organization – on the back wall a large flat zipper pocket, 5 small volume pockets for small items (pen, multitool, flashlight, electronics and so onD.) All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Waterproof jacket and trousers for work and active rest on the nature – protection from moisture and precipitation – Packed in a compact bag – ventilation inserts on the back – sleeve jacket with elastic – volume adjustment on bottom of jacket and trousers – two chest patch pockets and pocket for the radio – two slit pockets with zippers Color: The CMB Figure Fabric: "Oxford" (100% polyester)
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Weight: 62 g Size: 8,5×14×5 cm Velcro: Alfatex® (Belgium) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for 10 cartridges 12 or 20 gauge with Velcro. Improved model replacing the old one Mount: two or three removable clips, not included. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two or three identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm Through the use of detachable clips to the significantly improved reliability of fastening to the belt compared to the old model pouch, reduced from hanging out of the pouch when working with valve Pouch sewn inside the 10 cells of elastic tape, which are inserted into the cartridges 12 and 20 gauge. Elastic band sewn flush with the entrance to the main compartment, which facilitates the entry of cartridges (unlike many analogues, in which the gum is recessed downwards) In case of need can be carried in the pouch for 6 extra rounds, putting them in the middle between the elastic rows of cells staggered with respect to the main rounds The pouch is sewn entirely of two layers of fabric Cordura® 500d The main compartment of the pouch has a small height (5 cm), therefore above the entrance stands out about 1 cm from the height of the cartridge, which facilitates its extraction In the middle of the valve sewed extra Velcro which allows you to sostenute folded valve itself. While the pouch remains open, the valve does not prevent access to the cartridges, the Velcro does not apply to hands. It also increases the rigidity of the valve, maintaining its shape Long skill in the form of a loop of webbing at the edge of the valve for easy opening of pouch The tissue sections and Velcro edged for reliability and neat appearance All sections of the sling hidden under the edging At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 114 g Size: 12,5×21×4 cm (excluding VOG-25P) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for five shots grenade launcher VOG-25 and VOG-25P, Velcro and snap button. The pouch is oriented horizontally, the shots are popped up or down. An improved version of the old model Pouch for grenades VOG-25 (mod.2). Produced analog with a vertical orientation (the sideways shots are extracted) Mount: three or five removable clips, not included. For mounting on a classical system PALS/MOLLE need five cells in width and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase three or five identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): MOLLE 2M 60 mm ALICE The shots are arranged in vertically pouch Each compartment of the pouch fastens with Velcro and a button. The button has two positions, calculated as the VOG-25 and longer shots VOG-25P Valves offices have a complex shape, protecting contents from dirt and water In the new pouch button flap covered the outside of the sling to protect from ejection and flare with the abrasion coating At the ends of the valves the easy manners of slings with a thickening at the end Through the use of a removable clip magazine pouch can be placed upside down to extract the shots down. The clip must watch lock down (in this case, the fastening is more reliable) Compared with the old model dimensions platform with offices under the shots were reduced to a minimum, making the pouch smaller interfere with neighboring equipment The new stickies have even more area for secure fastening, and is sewn in two passes around the perimeter for durability All the tissue sections and lines edged for reliability and neat appearance At the bottom of each compartment of the pouch has a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Suit for protection against harmful biological factors, is recommended for work in the field and taiga conditions – hood complex structures, completely preventing the penetration of insects under clothing – mosquito net is detachable and retract into hidden pocket – hood with adjustable volume control – patch pocket with flaps with Velcro – sleeves with knitted cuffs-wristbands – strengthen elbows and knees – volume adjustment on bottom of jacket and bottom of pants – waistband-double elastic Color: The CMB Figure Fabric: mixed PL.210 g/m2, IN
Assault backpack "BOBR" 25L (Prival) was developed for law enforcement agencies,but due to its practicality began to be popular among fans of active rest. A small, comfortable backpack perfectly fits in the urban environment. The backpack has two main compartments fastened with zipper. In the first, the main compartment has two large pockets with Velcro and a hole for drinking system, which is at the top of the backpack, under the handle, and closed webbing. In the second part there are two small pockets for small items. In the front part of the backpack offers external pocket, between it and the second outlet when necessary to accommodate additional equipment and to secure it with the adjustable sling. On the sides of the backpack are two small pockets with elastic. The backpack straps are stitched so that from the outside it was possible to mount additional equipment pouches. Such slings are located on remote pocket, with straps in the bottom and sides of the backpack. Waist belt and shoulder straps of the backpack is soft, with a specially sewn-in foam for comfort when carrying in the case of a heavily loaded backpack.  Soft anatomical back with blocks of Air Mesh, wide shoulder straps, a chest coupler and waist belt enhance comfort and reduce the load on the back during prolonged wearing of the backpack. The backpack is adjustable in volume by a system of rods.   Features: Purpose:  weekend trips, everyday use Execution: soft Straps: 2 PCs Type: unisex Weight: 1450 gr Height: 47 cm Width: 31 cm Thickness: 36 cm Volume: 25 liters Capacity: up to 10 kg Fabric: 100% polyamide Fabric of bottom: 100% polyamide Color: khaki Key features Type: unisex urban Suspension system: soft framework, chest coupler, zone belt Volume: 25 litres, maximum load 10 kg Side screed: there Weight: 1.45 kg Dimensions (Wksht): 47х36х31 cm Functionality Back vent: there Pockets: side pockets, front pocket Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: there Rain cover: no
Multifunctional light and compact backpack "K.-55" CMB (Prival) with a maximum capacity of 55 l intended for tourists, hunters and fishermen. Comfortable molded backrest makes it a comfortable wear, and the compactness and relative simplicity provides a good mobility. The cloth material of the backpack does not absorb moisture, so you can not be afraid that the Luggage will get wet. On the sides of the "K.-55" the CMB is equipped with two large outer pockets with lockable zippers dochazkove, providing quick and convenient access to frequently used items. The backpack has a convenient large carrying handle and a floating top pocket flap for small items (also with dochazkove lightning).Features: Purpose: for hunting and fishing Execution: anatomical Type: unisex Straps: 2 PCs Weight: 800 gr Height:  from 30 cm to 60 cm Width: 30 cm Thickness: 25 cm Volume: 55 litres Capacity: up to 30 kg Fabric: Poly Oxford 600D PU RipStop Fabric of bottom: Poly Oxford 600 black PU Color: camo digital, camo forest Options: Side pockets Side screed Top pocket
Consist of two parts: detachable pants and the liner Pants: Can be worn with or without podstezhkoy Detachable elastic suspenders included. With an adjustable height mount Velcro to odnodolnym the buckles sewn to the waistband at the sides. You can unfasten the suspenders without removing the jacket High waist belt, fastens with two buttons on the sides enclosing a wide elastic band for utgivare. On the reverse side loops for fastening removable liner Zipper fly Pleats at knees give extra freedom of movement Reinforcing pads on the knees and in the seat Bottom of pants is dragged elastic cord to protect against penetration of cold and snow into the Shoe, adjust sewn with the inside latch Zipper on the sides of a bottom of trousers for easy donning shoes Under the side cargo pockets sewn a small loop of ribbon for tying a protective stocking UGC The pockets are fastened by a canadian (on tape leg) buttons, which have greater reliability than with conventional buttons. The buttons are large, making them convenient to operate in thick gloves Pockets: 2 mortise karamna hand 2 large cargo pockets on the sides 2 flat rear pockets Undercoat: Quilted lining with insulation that extends the life of clothing (insulation remains in place when cleaning or washing) Fastening to the pants and trousers comfortable lenticular buttons of the American model Unlike smoke, the liner of the pants cannot be used as a separate item to be worn as an outer layer, K. the belt has no laces or belt loops for a belt At the bottom of the trousers knitted cuffs for comfort Buttons at waistband for fastening to the pants The material of products: The main fabric smoke: Strong rip-stop high density (different from the counterpart used in the form of an Alloy), 35% cotton, 65% polyester The main fabric of the liner: 100% polyester Insulation:  //forma-odezhda.EN/index.php?route=product/tag&tags=primaloft" title="Primaloft">Primaloft® Black 2×133 g/m2 Product weight: 46/176 R-R – 1114 g 48/176 R-R – 1145 g 50/176 R-R – 1175 g 54/182 R-R – 1218 g 58/188 R-R – 1257 g The website also presents models of jackets with insulation //forma-odezhda.EN/index.php?route=product/tag&tags=primaloft" title="Primaloft">Primaloft®
Comfortable, practical backpack "STREET” (Prival) is designed for everyday use and short trips. The backpack consists of one large compartment with a small internal zip pocket for small items. On the sides of the front two mesh pockets with tight elastic bands, which will prevent loss of the items or will allow to press densely to stuff the backpack. Outside, in the front, the backpack has a roomy zippered pocket on the right side, at the bottom of the backpack sewn-in waist belt for attaching external equipment. Soft anatomical back with blocks of Air Mesh, wide shoulder straps, a chest coupler and waist belt enhance comfort and reduce the load on the back during prolonged wearing of the backpack. The backpack is adjustable in volume by a system of rods.  Features: Purpose:  weekend trips, everyday use Execution: soft Straps: 2 PCs Type: unisex Weight: 900 gr Height: 50 cm Width: 32 cm Thickness: 22 cm Volume: 35 litres Capacity: up to 10 kg Fabric: 100% polyamide Fabric of bottom: 100% polyamide Color: the CMB digital/khaki Key features Purpose: city Number of straps: 2 Type of construction: soft Chest coupler: there Waist belt: there Volume: 35 l Side screed: there Ventilated straps: no Back vent: no Weight: 0.9 kg Height: 50 cm Width: 32 cm Thickness: 22 cm Functionality Folding chair: no The top flap: no Adjustable valve: no Top pocket: no Bottom entry: no Partition in the main compartment: no Side entrance: no Side pockets: there Front pocket: there Detachable pockets: no Laptop compartment: no Reflective elements: no Pocket for points: no Conclusion drinking systems: no Rain cover: no Attachment for ice axes: no Mount for skateboard: no Bindings for snowboards: no Mount for helmet: no
The third generation jacket TSU with a number of improvements based on feedback The cut is based on the ACU jacket Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places All the Velcro sewn in to secure the perimeter and diagonals. Loaded hand stitched in two or three passes. Velcro on all the pockets are oriented so that the least scratch up and ruin gloves In comparison with the original suit ACU jacket is a bit cropped in the front, it has an optimal length, in this case, the lower back is not exposed when bending Stand-up collar (protects the neck from chafing by the armor), Velcro fastener, by analogy with the old generations of the ACU jacket. Can be worn folded down Central zip adenosarcoma tractor plastic zipper with the easy skill of the braid. Concealed zipper placket with Velcro The elbows are reinforced lining fabric Nylon Supplex with possibility of installation inside a protective shock-absorbing inserts-elbows. Included with the jacket are polyethylene foam protective insert. Compatible with ulnar insertions of the company D3O following models: T5, T5S, T6, TRUST. Double safe clasp, elbow support protects from falling out – a wide Velcro strap and a hidden pocket-emphasis for the lower edge of the insert Under the Velcro name tape on the chest Cuff opening with Velcro Attention! For jacket colors digital flora you can buy a kit yourself sew a shoulder strap Pockets: Chest flat pockets "Napoleon" at the tractor zippers, covered on the outside straps. Inside each pocket is sewn a loop of synthetic cord for hanging carabiners On top of the pockets Napoleon stitched surround roomy slanted pockets with Velcro closure. The pockets include internal organization in the form of several big pockets of light fabric, which top pulled sewn-in elastic band for better fixation of the content. On the right and the left side of the chest width and the number of pockets differs (see the photo in the catalog). These pockets are convenient for placing small items (pocket knives, multitools, flashlights, lighters, electronics, etcp.). Under the flap of each pocket sewn loop of cord for hanging carabiners Pockets on sleeves with Velcro, is oriented at a comfortable wrist angle and optimum depth. Pocket sewn on Velcro for badges A pocket for pens on the left forearm, similar to ACU. One of the branches of increased width for thick tactical pens Material: NYCO Rip-stop, 50% cotton, 50% nylon Amplification – 100% nylon Supplex fabric Nylon rip-stop THAT-WR 500. Light, silent, breathable and very durable for its light weight SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size REVIEWS: The review on the website "Russel" Review from Green7_62 YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 176 g Size: 21,5×10,5 (specified minimum height) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerNon-insulated case for carrying shirokogorloy 1l Nalgene bottle (including non-standard cap), its equivalent from Alloy – jar TR-1000, thermoses SY-750 and SBM-750, and other cylindrical objects of similar dimensions. Also accommodates adequately American military canteen, Nalgene OASIS canteen 1 QT and TR M-1000. The pouch can be used as a fallback to carry two 8-charging shops saiga/Vepr-12, or a stove JetBoil Flash Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two to four horizontal rows of cells in height. In this clip pouch slimming (20 mm) for easier installation The pouch entirely from two layers of fabric Cordura® 500d for durability and maintaining rigid form Cover complex shapes, protects contents from dirt and water. Fastens with adjustable fastex, the parent of which is attached to the surface of the fabric. The installation location of the fastex enhanced inside the second layer of fabric. Due to the adjustment can use non-lid, increasing the height of the bottle, such as Nalgene OTF LID or MULTI-DRINK REPLACEMENT. It is recommended to tighten the fastex sling to prevent rocking of the bottle when walking The pouch and the lid have a circular cross-section, is free for unimpeded placement inside the Nalgene bottle with a plastic on its bottom with a suitable glass (e.g. Tatonka Handle Mug) and camp utensils (spoons, forks). Cutlery should be laid vertically along the corners of the rear wall of the pouch On the underside of the top cover stitched flat pocket for small items. It is easy to carry tea bags or instant coffee and disinfectant tablets The outer surface is sheathed cells PALS for mounting additional pouches. 7 cells wide, 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. Vertical lanyard fastex freely passed though the upper middle cell PALS. When using odnomarshevoy American jar sling should be put on top of the cell, K. requires strong tightening of the pouch height All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for drainage water REVIEWS: Forum discussion The review of the prototype from Green7-62 YOU MAY BE INTERESTED IN:
Volume: 100 l Main fabric: 600D Polyester Accessories: Duraflex RAID backpack for long treks. The classic tourist model, adapted for military use Removable, adjustable straps. Large width, anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation. Inside vertical pockets for removable armour. The back has the correct anatomical form A single full frame from the lines, the reinforced design of the bottom attachment straps All exterior area covered backpack MOLLE straps On the front of the valve Velcro tape for the chevrons, removable logo included Removable wide belt. Side delays, cell MOLLE for attachment of pouches Lower side pockets-emphasis with adjustable volume control Tube with two contractions and two compression straps Removable height adjustable valve The set includes the protector, located in a separate pocket of the valve The point of attachment of the cargo on the bottom and the valve
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 114 g Size: 21×12,5×4 cm (excluding VOG-25P) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for five shots grenade launcher VOG-25 and VOG-25P, Velcro and snap button. The pouch is oriented vertically, the shots are extracted sideways. An improved version of the old model Pouch for grenades VOG-25 (mod.2). Produced analog with a horizontal orientation (the shots are popped up or down) Mount: two or three removable clips, not included. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two or three identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 125 mm 5" TacTie (Maxpedition) Long MALICE (Tactical Tailor) FixClip 5" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE The shots are arranged horizontally in the pouch Each compartment of the pouch fastens with Velcro and a button. The button has two positions, calculated as the VOG-25 and longer shots VOG-25P Valves offices have a complex shape, protecting contents from dirt and water In the new pouch button flap covered the outside of the sling to protect from ejection and flare with the abrasion coating At the ends of the valves the easy manners of slings with a thickening at the end Through the use of a removable clip magazine pouch is equally convenient to use both the left and on the right side of the trunk, K. the pouch may be turned upside down. This pouch must be installed so that separation of the pouch open in a forward direction relative to the arrow. The clip must watch lock down (in this case, the fastening is more reliable), and is fixed to the top ten slings UniClick on the back of the pouch (in this case, the top of the pouch will not SAG under its own weight) Compared with the old model dimensions platform with offices under the shots were reduced to a minimum, making the pouch smaller interfere with neighboring equipment The new stickies have even more area for secure fastening, and is sewn in two passes around the perimeter for durability All the tissue sections and lines edged for reliability and neat appearance At the bottom of each compartment of the pouch has a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 58 g Size: 14,5×10×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock of 2 pouches with Velcro for shops to modern pistols (TL, APS, Glock 17, SIG-Sauer P226, etcD.). With adjustable height and lateral contractions. Can also be used for carrying a variety of large folding knives, flashlights and so onp. items (dimensions – height about 12-14 cm, a diameter of 3 cm). Replaces the old model Unit with 2 pistol pouches under the stores. Not compatible with RM stores and multitools (too short), it is recommended to purchase a Pouch under multitool or small. gas. cylinder Mount: two removable clips, not included. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you need to purchase two clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit shops The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength Each branch looks at least 3 cm in height pistol stores, which is convenient to retrieve them The feature of this product is noticeable (1.5 cm) gap between the branches, whereby between the covers of the two stores formed the gap. It greatly facilitates the extraction of shops, K. allows you to fold the cover store separate fingers without interference from a nearby store The cross-section of each branch is dragged 35 mm sewn elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the ends of the valves 2 cm of manners for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
- concealed zip closure - pockets-proportial with the valve on secret buttons- vertical folds at the back for freedom of movement- under the armhole mesh inserts for ventilation- double inside pocket for documents on the muslin strip- gusset plate in the area of the elbows and knees- adjustable bottom of Trouser legsColor: The CMB figureFabric: blended fabric (35% cotton, 65% polyester) sq. 210 g/m2, INSize: with 88-92 on 120-124Growth: 170-176, 182-188 TU: 858-53-25-2005
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 25 g Size: 12,5×5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerCompact pouch with Velcro, specially designed to carry the most popular models of multitools (LEATHERMAN®, SOG®, Victorinox SwissTools, etcD.) or small gas canister. With adjustable height and lateral utjazhki. You can also use for carrying shopping 1-2 PM, various small pocket knives, flashlights, and sop. items (dimensions – height about 9.5-13.5 cm, diameter 3 cm). Not compatible with modern shops pistols type AES, APS, Glock 17, SIG-Sauer P226 (too high), it is recommended to purchase a Pouch under the pistol store Mount: one removable clip, batteries not included. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase one clip of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed to fit the multitool. No pockets under the bit sets, extension cords etcp. accessories, only separately multitool The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch Peeps at least 2.5 cm of the height of the multitool or pepper spray, which is convenient for its removal The cross section of the pouch is dragged 35 mm sewn elastic band. Due to the tightening object tightly held in the pouch even when open the valve The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible squares when adjusting for items of different heights At the end of the valve 1 cm skill for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion Review from Green7-62 YOU MAY BE INTERESTED IN:
Removable shoulder straps, fanspage and buttons for fastening. Sutured independently. Come to the TSU jackets-3 and ACU colors digital flora Material: NYCO Rip-stop, 50% cotton, 50% nylon YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 258 g Size: 25,5×16,5×12.5 cm (minimum height is specified) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerLarge rear pouch for the insert buckle with protection of small contents from falling out and height adjustment. For large load. Convenient to increase the quantity of backpacks and Luggage/unloading on utilitarian systems. Can be used as a fallback to carry the 100-machine gun cartridge box or ribbons (it is recommended to use more durable and rigid specialized the pouch). Inside shirokogorloy two standard 1l Nalgene bottle or equivalent from Alloy Mount: The UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height. The presence of clips throughout the rear area of the pouch without empty spaces can confidently carry great weight, the pouch tight to the platform The tube of light fabric 210d Oxford, protects the contents of a small pouch from falling out, allows to increase the height of the pouch (6 cm high). Tightening the paracord and lock Duraflex®. The exit of the cord from the edges of the tube reinforced with a braid and multiple bartacks, eyelets are not used, K. they are due in the field Cover complex shapes, protects contents from dirt and water, covers the tube at any height Hooks on the insert buckle Duraflex®, ability to adjust. Paternal fastex sling continues down the bottom to the back wall, forming a frame. Also this means very much to pull the volume of the pouch. To lanyard fastex does not SAG, it is passed though the sewed to the front wall of the pouch loop made of horizontal lines. The size of the loop large enough to easily pass through it fastex, without removing it from the lines The corners of the bottom rounded Outer side surface is sheathed cells PALS for mounting additional pouches (e.g., pouch utilitarian zipper 3x3). 3 cells in width, 3 rows in height on each side All the tissue sections and a sling hidden under seams or edged for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS:
Weight: 772 g Dimensions (L×W×In): 38×24×34 cm Main fabric: Polyester 600D PU Officer convenient bag for day trips and travel Large main compartment is closed with double zipper for quick and easy access to things Two big pockets one on each end of the closed zipper Special zipper for reducing the total volume of the main compartment Wide detachable sling to carry the bag over your shoulder Reinforced bottom Comfortable handle to wear the bag in hand Two handles at the ends for loading and unloading REVIEWS: Review the website "Russel"
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Hypalon ORCA® (Belgium) Size (In×W×T): 14×17,5×3.5 cm Weight: 127 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerBlock 2 of shingles under 20 stores charging the VSS/as Val/SR-3 "Whirlwind", 30 charging shops STANAG M4/Magpul PMAG®/Thermold. You can also use with 30 charging shops AK-74 and as a holster for pistols (Glock 17, TL, AAR etcD.) Mount: two or four removable clips, not included. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase two or four identical clips of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit stores. It is recommended to place the stores cover up Pockets separated by a tiny gap, widening the stores relative to each other. This allows you to clenching your fingers separate store on the sides without interference from a nearby store. In addition, it protects the stores from the collision Removable adjustable clasp 4 mm elastic cord and manners of which secure the top store. For removal of the magazine, you must take the skill to the side. Cord length is adjustable with a knot on the back of the pouch (cord wraps around the upper sling UniClick). Length of cord with a margin that takes into account the height of the store AK-74 and ease of tying. Skill of heavy-duty Hypalon material (similar to fabric Сordura® 1060d, laminated on both sides of the artificial rubber) to prevent slipping of manners regarding the store and fingers Removable adjustable utyazhka of 4 mm elastic cord that spans across the shop, independent for each of the two pockets of the block. Length density is controlled by the node on the side of the pouch. Length of cord with a margin that takes into account ease of tying. Allows tightly to hold the store without using the zipper (for quick access) The front wall of the pockets of two layers of Cordura® 500d, between which is sewn a piece of plastic. Plastic support form the pocket, facilitating the introduction and extraction of the shops, and does not strongly pull the elastic cord to deform the front wall, which could hamper the introduction of shops inside The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 2 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, especially on the camouflage versions. PALS cells are arranged so that when mounting them on top of the same block 2 of shingles BCC/M4 single shingles or BCC/M4, both layers of pouches and stores are at the same height The back wall is made of fabric Cordura® 500d lined with durable slip resistant Hypalon, contributing to the retention of shops without using fasteners, if necessary, quick access All the tissue sections and lines edged for reliability and neat appearance At the bottom there are eyelets for water drainage REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Volume: 53 l Weight: 2.4 kg Main compartment (W××T): 35×59×21 cm Main fabric: 600D Polyester Accessories: Duraflex Designed for Russian special forces. Designed for use in special forces All exterior area of the container covered slings MOLLE Volume power frame from a sling, reinforced construction of the bottom attachment straps Removable, adjustable straps. Large width, anatomical silhouette. With its slim profile and flat surface of the strap do not interfere with prokladka weapons. Two layers of foam and Airmesh mesh for softness and ventilation. Cell MOLLE for attachment of pouches A new spin thanks to a multilayer structure has high rigidity and ensures excellent ventilation. On the inner surface of a removable vertical battens Removable wide belt. Side delays, cell MOLLE for attachment of pouches Ties with postexam top and on the sides of the container to minimise the volume and relieve tension on the zipper Has numerous interior pockets and compartments from the grid At the bottom of the compartment for removable garmoshechka. Germogena included
Volume: 43 l Weight: 1.5 kg Main compartment (W××T): 32×55×16 cm Upper front pocket (W××T): 15×18×5 cm Lower front pocket (W××T): 15×18×5 cm Side pocket (2 PCs) (W××T): 14×32×8 cm Pocket flap (W××T): 28×20×5.5 cm Main fabric: 600D Polyester Plastic fixtures: Duraflex Comfortable, lightweight backpack with multiple external pockets Updated backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation. Volume pocket in the valve Pocket for documents on the inside of the valve Anatomic fit straps Chest coupler Removable wide belt slings Two large side zippered pockets Two small front zippered pockets Side pockets backpack is sewn only along vertical edges so that between them and the backpack formed of a flat separation with the input on top for carrying long loads. Above the pockets sewn laces to secure these goods Cell straps of the backpack allows to place a walkie-talkie, GPS or other equipment, and also to fix additional pouches in the most convenient for quick access locations Additional points of fastening of the cargo on the flap and the bottom of the backpack and removable ties included
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Weight: 29 g Size: 14,5×5×2.5 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerMagazine pouch with Velcro under one store to modern pistols (TL, APS, Glock 17, SIG-Sauer P226, etcD.). With adjustable height and lateral utjazhki. Can also be used for carrying a variety of large folding knives, flashlights and so onp. items (dimensions – height about 12-14 cm, a diameter of 3 cm). Not compatible with RM stores and multitools (too short), it is recommended to purchase a Pouch under multitool or small. gas. cylinder Mount: one removable clip, batteries not included. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two horizontal rows of cells in height. Attention! For attaching pouch you must purchase one clip of the following types: For platform PALS/MOLLE and belt width up to 50 mm inclusive: MOLLE 2M 75 mm 3" TacTie (Maxpedition) MALICE Short (Tactical Tailor) FixClip 3" (Kiwidition) For belts width up to 60 mm inclusive: MOLLE 2M 60 mm For belts of a width of 58-60 mm (for example, a Belt-US): ALICE MOLLE 2M 60 mm The pouch is designed for snug fit shop The pouch is sewn entirely of two layers of fabric Cordura® 500d for strength From the main compartment of the pouch looks at least 3 cm in height pistol shop, which is convenient for its removal The cross section of the pouch is dragged 35 mm sewn elastic band. Thanks to the same store tightly held in the pouch even when open the valve (the valve useless you can fill a shop, when you want quick access). The elastic band is located below the entrance to the pouch, whereby the input forms extending up the neck, facilitating the introduction of shops The pouch fastens with Velcro. The Velcro on the pouch is longer than the valve. This need for reliable adhesion on all possible area for adjustment for stores of different heights At the end of the valve 2 cm skill for easy unzipping of the pouch even in thick gloves All of the Velcro is sewn in two passes around the perimeter or an additional diagonals for reliability At the bottom there is a grommet for drainage water REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Size: 31×24×12.5 cm (about the average height is specified) Weight: 392 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Classic bread bag (butt pack). Compared to the old model pouch was lighter in weight and simpler in design, and have the correct rounded shape Mount: the UniClick system of the third generation. Four built-in clips. For mounting on a classical system PALS/MOLLE need six cells wide and two to four horizontal rows of cells in height The bottom corners are rounded to protect from rubbing Inner flat vertical pockets on the sides, top entry, fabric 210d Oxford. They are comfortable to accommodate small water bottles, CPR/EPR/RDG, automata andp. items The tube 210d Oxford cloth tightly laced paracord and lock Duraflex®. The exit of the cord from the edges of the tube reinforced with a braid and a few tacks The valve has a complex rounded shape with side walls, gently covering the top of the tube at any height adjustment The front of the valve is sewn Velcro loop for attachment of chevrons, Velcro size - 12×5 cm At the top of the valve has four loop straps for attachment two attachment straps (purchased separately, such as a mounting Kit sling with fastex //forma-odezhda.ru/duraflex/" title="Duraflex Accessories">Duraflex®) The flap fastens with two fastex Duraflex® with possibility of adjustment. Slings paternal pastukov continue down the bottom to the back wall, forming a frame. Also this means very much to pull the volume of the pouch. To take the slack out of the slings, they are passed under sewn to the front wall of the pouch horizontal loop. The extra ends of a sling wrap and hide under the ring out of gum The lines of the valve at the bottom of the pouch is drawn through otnosheniye the buckles are Duraflex® and form a built-in mounting straps. The length of the sling enough to fasten at the bottom of a small foam mats, rocket launchers and sop. items The top of the rear there are two semi-rings Duraflex® suspension straps to the CPF. The relative position of the rings for optimal compatibility with the straps Alloy - Nemesis-5 v lightweight and Versatile.3. It is strongly recommended to hang the bag to the back slings of the straps, with the belt/belt CPF is better to fasten around the middle with bread bags, not to the top. So the bag will be less dangle and interfere with the seat Outer side surface is sheathed cells PALS for mounting additional pouches (for example, the utilitarian pouch with zipper 3×3). 3 cells wide, 4 rows high on each side All the tissue sections and a sling hidden under seams or edged for reliability At the bottom there are two grommets for water drainage. The installation site is reinforced by pieces of lines to protect against pullout
A modernized version of trousers from the us army ACU field form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes New wide belt loops under his belt for convenience and reliability. Increased the height of the belt loops for a wider belt (to 60 mm) The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve The belt fastens on the button Zip fly with button closure. Piece design as the originals, unlike the old version of Alloy The bottom of the pants is pulled thin sewn braid All the Velcro sewn on to secure not only the perimeter, but also on diagonals (original – simple stitching around the perimeter). Loaded hand stitched in two or three passes The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: side inset pockets and rear button pockets made in a new way- the tissue sections on the edges of the pockets hidden under the seam is overlock in the original, which increases durability and reduces chafing of the skin side cargo pockets large volume. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism. Fastened by buttons instead of Velcro, as in the latest generation of the original ACU set. Three buttons, two standard and one extra rear, it is necessary to fasten the valve with strong otagowane entry, K. standard button is shifted to the center of the pocket relative to the response hinges on the valve, and opposite extreme is the third loop closure. The height of the valve is increased the side cargo pockets added internal organization in the form of a simple flat pockets from the main fabric for small items. On the right leg three narrow pocket on the left side are two wide pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees have been specifically adapted for use with inserts-knee pads with D3O or anatomical polyethylene foam inserts (not included!). This increased height boosts, and the altered form two seams which serve to center the protective inserts. Substantially increased reliability of retention of the pads inside the lining by the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog) the crotch is reinforced to protect from tearing, as on the original ACU pants last sample – added extra fabric in the seam and two new tie the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size
Volume: 70 l Weight: 2.4 kg Main compartment (W××T): 35×80×22 cm Side pocket (2 PCs) (W××T): 18×29×6 cm Pocket flap (W××T): 28.5×21×8.5 cm Main fabric: 600D Polyester Accessories: Duraflex Universal mid volume backpack Removable, adjustable straps. Anatomical silhouette. Two layers of foam and Airmesh mesh for softness and ventilation. Upper backstay. Cell MOLLE for attachment of pouches Backpack back thanks to a multilayer structure has high rigidity and ensures excellent ventilation. Inside vertical pockets for removable lat Removable wide belt. Side delays Removable height-adjustable valve (volume 2.6 l), outer compartment with zip, compartment for hermogene and hidden compartments under flap Side pockets (2.3 liter) zip Lower side pockets-emphasis Additional points of fastening of the cargo on the bottom and the front surface Anchorages in rock equipment Four handles for loading/carrying backpack
Легкая куртка отлично защищает от продувания, благодаря притачной подкладке, съемному капюшону и ветрозащитной планке. Имеются: передние накладные и боковые прорезные карманы. Объем рукавов регулируется при помощи ленты и пластиковых пат (липучек). ХАРАКТЕРИСТИКИ Защита от дождя и ветра Уставной крой Для Внутренних войск МВД России МАТЕРИАЛЫ Рип-стоп Мембрана
Удлиненная куртка разработана под жесткие требования Внутренних Войск МВД России. Хорошая теплоизоляция достигается за счет трикотажных манжет, съемных воротников, капюшона и утепляющей подкладки. ХАРАКТЕРИСТИКИ Защита от холода Уставной крой Для Внутренних войск МВД России МАТЕРИАЛЫ Рип-стоп Мембрана Утеплитель "Файберсофт"
The classic model REVIEWS: Review from Vladislav Boychuk (tankist_sssr)
The analogue of the BZ "COSSACK-5ССм". It also used steel armour panels with anteriority coating, however, they are not rectangular, and contour configuration. In this regard, the protected area increased to 23-25sq.DM. Partially protected sides and clavicular region. The BZ mass of 5.4-5.6 kg. All the means of body armor are made to order within 2 calendar weeks. To place an order and to discuss its conditions, please go to the nearest shop or office.
Size: 18×15 cm Weight: 122 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch on the buckles "AAT" for MPL (a small infantry shovel). Discontinued, replaced by a Pouch under the MPL v.3 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two horizontal rows of cells in height The pouch is a rectangular pocket with an entrance at the bottom, which is inserted into the shovel. The shovel is fixed with two testexam. The top of the pouch is reinforced with an additional layer of fabric Cordura Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Size: 18×15 cm Material: Cordura®1060d (100% nylon) Weight: 136 g Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer The pouch on two fastech for MPL (a small infantry shovel). Discontinued, replaced by a Pouch under the MPL v.3 Mount: the UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to three horizontal rows of cells in height. Compared to the old variant, the new pouch is attached over a larger area, providing rigid fixation without interfering edges The pouch is a flat rectangular pocket with entrance from the bottom, which is inserted into a shovel The pouch is fastened at the bottom by two fastex Duraflex® with possibility of adjustment. Compared to the old model fastex are more efficient, better locking spade The pouch is sewn entirely of fabric Cordura® 1060d, the underside of the top is reinforced with a second layer of fabric for protection against abrasion by the edge of bayonet spade All edges are fabric edged for reliability and neat appearance All the ends of the sling UniСlick hidden under the edging REVIEWS: Forum discussion YOU MAY BE INTERESTED IN:
Size: 23×12,5×10.5 cm Size of inner pocket: 9×9 cm Weight: 186 g Material: Cordura®1060d (100% nylon) Oxford 210d (100% nylon) Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerThe pouch under the mask (the small model type GP-5), also perfect used as Luggage. Discontinued, replaced by the under the gas mask Pouch/Luggage Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to four horizontal rows of cells in height Pouch latest generation fastens with a buckle "AAT", the ability to adjust. The old generation used a clasp with two buttons At the top of the valve from the inside sewn a small, flat pocket of fabric 210d Oxford with Velcro for kit anti-fog films for the lenses of a gas mask The pouch can be used as Luggage The outer surface is sheathed cells PALS/MOLLE for attachment of additional pouches The top of the rear metal loop for hanging on the strap CPF At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 15×3×8.5 cm Weight: 52 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Volume: 65l Dimensions (W××T): 83×33×24 cm Durable travel bag Waterproof bottom of the tent material "Thesis" Volume two end pockets with zipper and flat side pocket Access to the main volume of the bag is via a single zipper on the top of the bag On the inner end walls are flat pockets with flaps On the top of the bag are straps that allows you to use the bag as a backpack Maximum load capacity – 40 kg
for domestic military kettle, on the buckle "AAT". Also fits the Swedish army pot (SHAQ). Discontinued, replaced with Pouch for v pot.2. Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two horizontal rows of cells in height. Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt. At the bottom there are two grommets for water drainage. Material: Cordura® 1060d, Features: Size: 17-19-12,5 cm, Weight: 129,
The costume consists of trousers. straight cut with a Central zip at the top. A stitched hood with a removable insert made of mosquito nets. Mesh face connected to the side parts of the hood with the help of zippers and retracts into a special pocket in the seam coquette on a textile fastener. Sleeves vtachnye. On bottom of sleeves elastic webbing on the inside sleeve with knitted wristlets. Waist and bottom the scenes with the cords with clamps to adjust the volume. On the back shelf , at the top of the sleeve folds laid trap. Pants. With belt loops for wide belt, the volume of the waistband is adjustable elastic braid. with side patch pockets with flaps on textile fasteners.On the bottom of the trousers — elastic band to adjust the volume and stropki button closure for filling of the trousers into the shoes. In the knee region are nakladki-amplifiers. Pads on the amplifier front trousers halves and rear halves of the pants folds laid trap. Fabric: Mirage-210, PE-67%, CL-33%
Patent No. 46636. Trousers from a modernized version of the Soviet hopping suit for special forces, known as "Mabuta". Recommended for security services Free, not hampering the cut In the suit used stainless button Too high waist for comfort and ease of carrying ammunition on the belt. The sides of the belt potrasenoy The loops wide waist belt Reinforcing pads on the knees Folds in the knees for anatomical cut Zipper fly The belt fastens with two buttons The bottom of the pants Podrabinek, inside sewn covers are made of thin cotton calico. The anthers are equipped with stripgame of gum. It is recommended to fill in anthers shoes, and the Trouser leg to fit over boots Pockets: pockets on the front thighs with the entrance on top of the two buttons. The entrance pockets is folded to protect the small content from falling out rear inset pocket on the right side on the two buttons on the right leg side pocket for hook knife or bayonet-knife. Pocket has podrezany entrance, flap on two buttons. Sewn inside the webbing, forming cells for self-fastening of the sheath side inset pockets Material: "Rip-stop": 53% cotton; 47% polyester "Gretta": 53% cotton; 47% polyester "Standard": 60% cotton; 40% polyester Product weight: 46/176-p – 589 g 50/176-p – 654 g 54/182 R-R – 690 g 58/188 R-R – 703 g SIZE: Download Dimensional grid (.xls) to accurately determine the correct size REVIEWS: Review from tankist_sssr YOU MAY BE INTERESTED IN:
The costume consists of a long with two hoods, insulated lining (jacket)and trousers. Straight cut jacket with the Central onboard zipper with internal windproof placket with break on the face. Chin strap a part of the fleece. At the bottom of the slide with an elastic cord with clamps on the lateral parts. On the shoulder portions reinforcing shoulder pads. On the shoulder line the shoulder straps are on buttons. The shelf with the coquette. In the top of the right shelves is a patch pocket with flap on the button. The left side Welt pocket in the frame with zipper. In the lower parts of shelves are arranged side lining with two pockets, one patch pockets with flap and button and the second slit pocket in the frame with zipper. With back yoke, Central and lateral parts. Set-in sleeves double-seam. On bottom of sleeves stalemates on the contact ribbon to adjust the volume. On the left sleeve patch pocket with flap and button. Stand-up collar. The lower collar is made of fleece. In the seam stitching of the collar there is a plank that covers the zipper, fastening the hood. The first demountable insulated. The inner part of the hood is made of fleece. Hood in three parts: the two side and Central. On the front of the neck pulled through the scenes with a cord with two clamps. The hood fastens with the Velcro fastener. Second lightweight jerseys on the canvas (the grid). The hood is in three parts and sun visor. On face neck hood pulled through the scenes with a cord with two clamps. The ends of the hood fastened by buttons to the collar. In the lower parts of all patch pockets, two holes machined eyelets. The lining is made of textile fabric (mesh). The left side is lining Welt pocket with leaflets (of primary leaf tissue). Removable insulated lining in the form with zipper on three buttons.At the bottom of the jacket removable padded elastic tape. Sleeves with knit wristlets.Attached to the jacket with a zipper and button closure. On the left removable insulated shelf is Welt zip pocket on right patch pocket with textile clasp. Pants straight-leg advanced insulated belt with five belt loops, adjustable waistband width elastic tape on the lateral parts. Belt with Velcro loops and (external and internal), with codpiece with the zipper. The front halves of trousers consist of the upper and lower parts. The front halves of trousers with Welt pockets and zippered vents from knitted fabric (mesh) and zipper located in the undercuts. Wheel halves with a reinforcing overlays at the knees (kneecaps) volume with four tucks. On the right rear half of the pants Welt zipper pocket.
The costume summer field for servicemen sample of 2010, type a (for soldiers and officers) Jacket: Central button closure, all covered except for the top strap Strengthen the elbow pads of the second layer of tissue Cuffs fastened with a cloth pieces with Velcro Shoulder straps with Velcro: one in the center of the chest, one on top of the pocket on the left sleeve. Fanspage included Underarm ventilation slits, closed with synthetic mesh Loop hanger on the collar from the inside Pockets: overhead flat chest pockets with flaps with Velcro overhead flat pockets on sleeves with Velcro flaps internal pocket for documents with Velcro flap, water resistant fabric Pants: Straight cut The fly and waist button closure Waistband with six belt loops under the belt The pants bottom with elastic stripgame. Length stripos adjustable, unused stropki are fixed inside leg vertically with buttons Pockets: bulk cargo side pockets with flaps with Velcro side inset pockets flat back pockets with flaps Velcro Gain: The increased rear grip from the second layer of tissue Strengthening the knee pads of the second layer of fabric, there are Darts for articulation. Pockets form under the shock insert (entry closure). Insert not included The material of products: Rip-stop Strong, 53% cotton/47% polyester. Quality fabric and durability are superior to dyes original costume Buttons of lenticular shape, more comfortable than the original flat with the cutting edges Product weight (jacket): 50/170 R-R – 576 g 54/170 R-R – 592 g 56-58/182 R-R – 637 g Product weight (pants): 50/170 R-R – 579 g 54/170 R-R – 600 g 56-58/182 R-R – 639 g
Size when folded 16×22 cm Size in the unfolded state 43×22 cm Universal model that can be worn both on hand and on the belt Perfect for all little things who need to use it daily
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Velcro: Alfatex® (Belgium) Size: 18,5×6,5×16 cm Weight: 102 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUnder the pouch binoculars B7×30 "Second" or the PGO-7V (grenade launcher optical sight) with Velcro. Can be used as Luggage. Production is halted Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need five cells wide and two to three horizontal rows of cells in height Cover complex shapes, protects contents against moisture and dirt Velcro fastener, comfortable skill of slings The external surface is sheathed PALS straps for attachment of additional pouches At the bottom there are two grommets for water drainage REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 26×15,5×9 cm Weight: 288 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch under the 100-machine gun cartridge box or machine-gun belt, the buckle "AAT". Discontinued, replaced by a Pouch under machine-gun box v.2 Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height On top of the valve has a handle for carrying the pouch Lining – fabric Oxford 210d (100% nylon) In the walls of the pouch sewn hard plastic inserts. They increase the strength and maintain shape of pouch. It is necessary for more convenient installation and removal of the box. Also the pouch is convenient to use with cartridge belts without box Side at the bottom of the pouch has a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick? YOU MAY BE INTERESTED IN:
Size: 11,5×9×2.5 cm Weight: 59 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch to store the SVD, on the silent castle. Discontinued, replaced with magazine Pouch for 1 MAG. SVD on the fastex Mount: two built-in clips. For mounting on a classical system PALS/MOLLE need two cells wide and two horizontal rows of cells in height Silent and secure locking Suitable for eight stores for the saiga-308 and Tigr-308 Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt The top and bottom of pouch reinforced with pads of dense lines to protect against wiping the ends of the stores At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 22×4,5×4.5 cm Weight: 63 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerPouch for RDG (manual smoke grenade), on the silent castle. Discontinued, replaced with Pouch for FGR/ROP/2РСП Mount: one built-in clip. For mounting on a classical system PALS/MOLLE is needed is one cell wide and two to four horizontal rows of cells in height Silent and secure locking Due to the special shape of the valve, the contents of the pouch protected from ingress of water and dirt Top and bottom reinforced lining of thick webbing to maintain shape of pouch At the bottom there is a grommet for drainage water Material: Cordura® 1060d REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 16×5,5×21 cm Weight: 100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerProduction is halted REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
Size: 16×4×12.5 cm Weight: 75 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerProduction is halted REVIEWS: The rules of using the UniClick pouches Plus What UniClick?
ZDU - EMP - Digital flora (camouflage)
ZDU - EMP - Digital flora (camouflage) Camouflage SDU EMP . Camouflage SDU Protection position Also the EMP uniform Masking Color Also Russian figure - camouflage toggle camouflage FR. camouflage camouflage a mottled camouflage coloration used to reduce the visibility of people, weapons, equipment, structures due to the breaking of the silhouette of the product or subject To learn about Camouflage from the Encyclopedia used in the army of the Russian Federation since 2002. A sample set of the new form. Summer set Seasonal options 2979-8 colors, Dark winter left , Both light summer production of Tchaikovsky textile, E. the only difference in tissue density. But summer right is lighter. Specially selected segments with identical pattern. The history of camouflage SDU EMP Official name - EMP uniform masking color In 2008, Russia introduced a new pixel or digital camouflage. The impetus for development was the American analogue of Marpat. The coloring is replaced HRV-98 flora. Full re-equipment of the army planned for 2011, but we have all the usual and many more years will we see soldiers in different disguises. Initially to produce camouflage toggle camouflage FR. camouflage camouflage a mottled camouflage coloration used to reduce the visibility of people, weapons, equipment, structures due to the breaking of the silhouette of the product or subject To learn about Camouflage from the Encyclopedia started at CJSC Barnaul melange plant Melanzhist Altai called SDU - Protection until it stops . Moreover, the MO ordered, not the fabric, and the finished product. We have combined the camouflage of a new breed. Its designer worked as a workshop group of famous Russian fashion designer Valentin Yudashkin. The pattern, colors, dyes developed in Moscow together with the Ministry of defence. Note that the fabric is not visible to night vision devices, does not fade, shiny, and reflects all light waves andD. In General, it meets all the above standards of the Ministry of defense. Meet the following everyday names of camouflage ZDU Defense position - the name of the costume design Yudashkin in this colour. Just call the Russian number, ciprofloxac and udachnoj. Russian pixel according to unspecified data, it s a little different coloration, but the EMP is sometimes used. But, again Official name - EMP Color options Currently, adopted at the MO EMP - eighth. The samples below are also offered the defense Ministry. All the EMP at the Tchaikovsky textiles went under the encoding 2979 First, this was experienced in the form of Second - this used Armokom in his maskirovka suit The third mountain Fifth Sixth Seventh And finally eighth, adopted by the RF Ministry of defense For southern regions The diversity Develop in a different pattern for encoding 2981 As a result of the defense Ministry adopted the colors 2979-8. Manufacturers of fabric at least three - Tchaikovsky textile - Barnaul melanist Belarusian Mogotex
 
Flora (camouflage)
Flora (camouflage) Camouflage Flora Camouflage flora HRV-98 common colours of camouflage of the Russian military. In the Russian Army was adopted in 1998, replacing HRV-93. In contrast, HRV-98 camo stripes are arranged horizontally and have a different shape. The pattern creates an optical illusion of dissolution of the silhouette at close and at long distance in the nature of Central Russia, but for a number of years 148 days is not well suited for the mountains of the Caucasus. Camouflage Flora Camouflage Flora For earlier versions are characterized by the presence of several color schemes, as well as the difference in the material and the cut. Recently, in the framework modernise the armed forces, flora is replaced with the pixel camouflage - the so-called Digital flora or Russian figure. Gallery One of the early color options of HRV-98 flora . Soldiers in camouflage HRV-98 flora . Soldiers in camouflage HRV-98 flora . Camouflage toggle Camouflage FR. camouflage camouflage a mottled camouflage coloration used to reduce the visibility of people, weapons, equipment, structures due to the breaking of the silhouette of the product or subject To learn about Camouflage from the Encyclopedia HRV-98 flora . Color for mountain brigades. Equipment toggle Equipment Equipment View all products from the category Equipment in the colours of HRV-98 flora .
 
Digital flora (camouflage)
Digital flora (camouflage) Camo digital flora or Russian figure - a modern pixel camo, adopted in the Russian army since 1998.   The figure digital flora creates an optical illusion of dissolution of the silhouette at close and at long distance in nature. The colour of the fabrics is not visible to night vision devices, and does not fade, not shiny, and reflects all light waves.  The fabric is durable, reinforced, able long to resist moisture and wind, dries quickly, shrinks and does not fade when washed.  
 
Ask a question
Sale