info@militaristwear.com
0 р. No products in cart!
0 р. No products in cart!
/19410501l-170x170.jpg)
/59409_120_Alternate1_enl-170x170.jpg)
/13025e7dfdb5244d35cf2dca5d3c1904-170x170.jpg)
/0406/belt-token-black-noquantity-170x170.jpg)
/857-noquantity-170x170.jpg)
/1906/belt-black-170x170.jpg)
576 р.
588 р.
1 134 р.
660 р.
866 р.
504 р.
504 р.
660 р.
1 188 р.
624 р.
649 р.
1 188 р.
1 188 р.
948 р.
948 р.
692 р.
582 р.
5 988 р.
5 988 р.
0 р.
7 920 р.
5 940 р.
5 940 р.
228 р.
624 р.
624 р.
3 074 р.
780 р.
780 р.
708 р.
756 р.
876 р.
876 р.
840 р.
792 р.
792 р.
672 р.
948 р.
948 р.
137 р.
588 р.
1 440 р.
1 200 р.
1 440 р.
588 р.
1 800 р.
1 168 р.
420 р.
420 р.
2 448 р.
780 р.
Strap of nylon webbing with quick release buckle If necessary, the belt can be cut to desired length. Edge you should definitely melted Dimensions and weight: Webbing width 30 mm Long strap up to 115 cm Weight - 55g
Durable, comfortable and functional strap Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro fastener. If necessary the belt can be used for belaying when climbing Durable nylon webbing with a width of 4 cm does not deform under load Reinforced seams 3 colors The manufacturer's website: www.511tactical.com
Durable, comfortable and functional strap Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro fastener. If necessary the belt can be used for belaying when climbing Durable nylon webbing with a width of 4 cm does not deform under load Reinforced seams 3 colors The manufacturer's website: www.511tactical.com
Durable, comfortable and functional strap
Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro fastener. If necessary the belt can be used for belaying when climbing
Durable nylon webbing with a width of 4 cm does not deform under load
Reinforced seams
3 colors
The manufacturer's website: www.511tactical.com
Durable, comfortable and functional strap Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro. If necessary the belt can be used for belaying when climbing Durable nylon webbing with a width of 4 cm does not deform under load Reinforced seams 3 colors The manufacturer's website: www.511tactical.com
Durable, comfortable and functional strap Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro. If necessary the belt can be used for belaying when climbing Durable nylon webbing with a width of 4 cm does not deform under load Reinforced seams 3 colors The manufacturer's website: www.511tactical.com
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 400 g Available in three sizes: 46-52, 54-58, 60-64 * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular discharge zone of the raised comfort, the entire length allows mounting of the system of PALS and ALICE. Free saturation pouches depending on task For use inside belt strap is inserted, optional. Recommend straps Universal 50 mm v Universal.2 , the Belt US The belt has six suspension points of the shoulder straps. Compatible with straps "Nemesis-5" v lightweight and Versatile.3, as well as all other straps, with a four - or six-point suspension The suspension straps on semi-rings Duraflex®. Two rear and two front for vertical lines, double on the sides for inclined lines (individual lines for each ring) The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips. It also allows for a small load to wear the belt without the straps The inner surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness At the bottom of the belt on each side there are slots in hiding loop for hanging platforms, and thigh holsters (in these loops is passed is going on inside of belt strap) Feature of belt is that unlike the majority of similar curved belt MOLLE cell suspension of pouches sewn entirely one after the other, without breaks, and can be hung along the entire length of anywhere with a pitch of 37 mm without restrictions
Weight: 272 g Belt to the discharge belt ALICE old model, width 60 mm For the pouches of the ALICE system, UniСlick and fixtures on Short MALICE clips and MOLLE 2M 60, and all the pouches and holsters with a simple strap under the strap of suitable width The belt is used as the discharge/pistol or as a domestic in the zone "Nemesis-5". It is not recommended to use as Trouser The belt fastens with a plastic buckle Kovacs. It is highly durable compared with conventional testexam tight and unbuttoned, making accidental opening is excluded The strap is made of very hard lines (100% polyester), keeps the shape well, not twisted The entire length of the belt along its brim punched metal eyelets. They are used for fastening straps ALICE and analogues of old design, having at the ends of the metal snap hooks-hooks. Also the eyelets are useful for mounting non-standard sheaths and pouches by threading through the holes paracord The adjustment is made with robust metal fittings. At the ends of the serrated belt installed clips, and to maintain the flat shape of the belt near it is crimped with four metal loops The strap is dimensionless
Simple discharge belt width 50 mm with special hidden cells, preventing the slide along the belt installed on his pouches with clips and straps gear For the pouches of the ALICE system, UniСlick and mounts with clips 2M and MALICE and all the pouches and holsters with a simple strap under the strap The belt is used as the discharge/pistol or as a domestic in the zone "Nemesis-5". It is not recommended to use as Trouser The belt fastens with Duraflex® additional fixation button, accidentally undoing excluded The strap is very stiff, holds shape well, not twisted Adjusts with Velcro, with both ends of the belt. For reliable fixing of the fastened ends of the belt they wear the ring slings. The ring should be shifted as close as possible to the fastex On the inner side of the belt along the entire length of the Velcro loops sewn narrow and thin tight braid, forming an analogue cell PALS. Braid does not interfere with the fastening of the Velcro with the strap adjustment and does not create extra thickness. When mounting the pouch to the belt clip slides under the cell, thus there is a reliable fixation in the direction along the belt. Similarly, fixed "Webbing shoulder v universal light.3" – webbing straps, clasping the strap is passed under the cell of the braid In the area of the Velcro-hooks on the ends of the belt are overlapped cell (to push the clip between the Velcro is prohibited, K. the clutch is broken), so for fixing clips and straps webbing sewn with cells from the opposite side (when wearing the belt these cells facing the body). Thus, cells are always present on the entire inner side of the belt at any setting The belt is available in three sizes: 46-52, 52-58, 58-66 REVIEWS: Forum discussion
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Installation instructions belt on and packs: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm
Durable, comfortable and functional strap
Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro fastener. If necessary the belt can be used for belaying when climbing
Durable nylon webbing with a width of 4 cm does not deform under load
Reinforced seams
3 colors
The manufacturer's website: www.511tactical.com
Weight: 272 g Belt to the discharge belt ALICE old model, width 60 mm For the pouches of the ALICE system, UniСlick and fixtures on Short MALICE clips and MOLLE 2M 60, and all the pouches and holsters with a simple strap under the strap of suitable width The belt is used as the discharge/pistol or as a domestic in the zone "Nemesis-5". It is not recommended to use as Trouser The belt fastens with a plastic buckle Kovacs. It is highly durable compared with conventional testexam tight and unbuttoned, making accidental opening is excluded The strap is made of very hard lines (100% polyester), keeps the shape well, not twisted The entire length of the belt along its brim punched metal eyelets. They are used for fastening straps ALICE and analogues of old design, having at the ends of the metal snap hooks-hooks. Also the eyelets are useful for mounting non-standard sheaths and pouches by threading through the holes paracord The adjustment is made with robust metal fittings. At the ends of the serrated belt installed clips, and to maintain the flat shape of the belt near it is crimped with four metal loops The strap is dimensionless
Durable, comfortable and functional strap
Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro fastener. If necessary the belt can be used for belaying when climbing
Durable nylon webbing with a width of 4 cm does not deform under load
Reinforced seams
3 colors
The manufacturer's website: www.511tactical.com
Simple discharge belt width 50 mm with special hidden cells, preventing the slide along the belt installed on his pouches with clips and straps gear For the pouches of the ALICE system, UniСlick and mounts with clips 2M MALICE and MOLLE and all the pouches and holsters with a simple strap under the strap The belt is used as the discharge/pistol or as a domestic in the zone "Nemesis-5". It is not recommended to use as Trouser The belt fastens with Duraflex® additional fixation button, accidentally undoing excluded The strap is very stiff, holds shape well, not twisted Adjusts with Velcro, with both ends of the belt. For reliable fixing of the fastened ends of the belt they wear the ring slings. The ring should be shifted as close as possible to the fastex On the inner side of the belt along the entire length of the Velcro loops sewn narrow and thin tight braid, forming an analogue cell PALS. Braid does not interfere with the fastening of the Velcro with the strap adjustment and does not create extra thickness. When mounting the pouch to the belt clip slides under the cell, thus there is a reliable fixation in the direction along the belt. Similarly, fixed "Webbing shoulder v universal light.3" – webbing straps, clasping the strap is passed under the cell of the braid In the area of the Velcro-hooks on the ends of the belt are overlapped cell (to push the clip between the Velcro is prohibited, K. the clutch is broken), so for fixing clips and straps webbing sewn with cells from the opposite side (when wearing the belt these cells facing the body). Thus, cells are always present on the entire inner side of the belt at any setting The belt is available in three sizes: 46-52, 52-58, 58-66 REVIEWS: Forum discussion
Simple discharge belt width of 50 mm For the pouches of the ALICE system , UniСlick and mounts with clips 2M MALICE and MOLLE and all the pouches and holsters with a simple strap under the strap The belt is used as the discharge/pistol or as a domestic in the zone "Nemesis-5". It is not recommended to use as Trouser The belt fastens with Duraflex® additional fixation button, accidentally undoing excluded The strap is a sandwich of two layers of fabric (100% polyester), between which is enclosed a layer of rigid foam. The belt keeps the shape well, not twisted. The belt is edged on the perimeter braid, thereby increasing comfort during extended wear, and the ends of the belt are rounded for easier threading into the buckle and strap of pouches and holsters Adjusts with Velcro, with both ends of the belt. For reliable fixing of the fastened ends of the belt they wear two ring slings. The ring should be shifted as close as possible to the fastex Can be used together with the shoulder Straps versatile lightweight v.3. Thanks to a special adapter included straps, they will not slide along the belt The belt is available in three sizes: 46-52, 54-58, 60-66
Strap of nylon webbing with quick release buckle If necessary, the belt can be cut to desired length. Edge you should definitely melted Dimensions and weight: Webbing width 30 mm Long strap up to 115 cm Weight - 55g
Simple discharge belt width of 50 mm For the pouches of the ALICE system , UniСlick and mounts with clips 2M MALICE and MOLLE and all the pouches and holsters with a simple strap under the strap The belt is used as the discharge/pistol or as a domestic in the zone "Nemesis-5". It is not recommended to use as Trouser The belt fastens with Duraflex® additional fixation button, accidentally undoing excluded The strap is a sandwich of two layers of fabric (100% polyester), between which is enclosed a layer of rigid foam. The belt keeps the shape well, not twisted. The belt is edged on the perimeter braid, thereby increasing comfort during extended wear, and the ends of the belt are rounded for easier threading into the buckle and strap of pouches and holsters Adjusts with Velcro, with both ends of the belt. For reliable fixing of the fastened ends of the belt they wear two ring slings. The ring should be shifted as close as possible to the fastex Can be used together with the shoulder Straps versatile lightweight v.3. Thanks to a special adapter included straps, they will not slide along the belt The belt is available in three sizes: 46-52, 54-58, 60-66
Strap of nylon webbing with quick release buckle If necessary, the belt can be cut to desired length. Edge you should definitely melted Dimensions and weight: Webbing width 30 mm Long strap up to 115 cm Weight - 55g
Soft shoulder strap.
Weight :
130 g
Size :
120 cm
Material :
420 HD Nylon
Description
Benefits and features
Adjustable length
Two robust carabiners
Soft non-slip lining under the shoulder
Tactical Trouser belt with plastic inserts
Material:
100% Polyester
Width: 40 mm
Tactical Trouser belt with plastic inserts
Material:
100% Polyester
Width: 40 mm
Material: 100% leather
Length: 138 cm
Width: 50 mm
Color: black
Material: 100% leather
Length: 110 cm
Width: 40mm
Color: black
Easy Trouser belt with a hidden pocket for trips and travel
size S - 106 cm
size M - 117 cm
Trouser belt, wide straps with easy buckle perfectly performs its basic functions, but not only...
A small zippered pocket on the inner side of the belt will allow you, whatever happens on the road, not to lose presence of mind.
Documents and credit card in there, of course, will not believe, but the money to hold out until help arrives or return ticket may be placed.
Easy Trouser belt with a hidden pocket for trips and travel
size S - 106 cm
size M - 117 cm
Trouser belt, wide straps with easy buckle perfectly performs its basic functions, but not only...
A small zippered pocket on the inner side of the belt will allow you, whatever happens on the road, not to lose presence of mind.
Documents and credit card in there, of course, will not believe, but the money to hold out until help arrives or return ticket may be placed.
Easy Trouser belt with a hidden pocket for trips and travel
size S - 106 cm
size M - 117 cm
Trouser belt, wide straps with easy buckle perfectly performs its basic functions, but not only...
A small zippered pocket on the inner side of the belt will allow you, whatever happens on the road, not to lose presence of mind.
Documents and credit card in there, of course, will not believe, but the money to hold out until help arrives or return ticket may be placed.
Simple, reliable and lightweight belt for trousers
The width of the belt 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers
Durable nylon webbing
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt. The buckle has a slim profile
The free end of the strap tucked under a ring of thick elastic bands
The strap is dimensionless. If excessive length of the belt allowed the circumcision of the extra lines, with the obligatory slice of melting
The product on the manufacturer's website: http://blackhawk.com/
Simple, reliable and lightweight belt for trousers
The width of the belt 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers
Durable nylon webbing
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt. The buckle has a slim profile
The free end of the strap tucked under a ring of thick elastic bands
The strap is dimensionless. If excessive length of the belt allowed the circumcision of the extra lines, with the obligatory slice of melting
The product on the manufacturer's website: http://blackhawk.com/
Simple, reliable and lightweight belt for trousers
The width of the belt 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers
Durable nylon webbing
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt. The buckle has a slim profile
The free end of the strap tucked under a ring of thick elastic bands
The strap is dimensionless. If excessive length of the belt allowed the circumcision of the extra lines, with the obligatory slice of melting
The product on the manufacturer's website: http://blackhawk.com/
The main part of the belt is rectangular in shape and consists of the following layers:
- Volumetric mesh for softness and ventilation
- Soft foam with closed cell (does not absorb water)
- Nylon 1000D
On the outside of the cell from sewn slings for attaching the pouches to the ALICE system, the analogue of ALICE from BLACKHAWK! That STRIKE, Uniclick, MOLLE, MALICE clips, SPEED CLIPS. The number of cells on the belts of all sizes odd
The belt fastens with fastex with additional fixation button, accidentally undoing excluded
Adjustment with fastex on both ends of the belt. The extra ends are bent and fixed with Velcro
The strap can be hung on the shoulder Strap universal light. For this purpose the ends of the straps must cover the looped belt and to be threaded under the MOLLE cell
The belt comes in several sizes
The product on the manufacturer's website: http://blackhawk.com/
The main part of the belt is rectangular in shape and consists of the following layers:
- Volumetric mesh for softness and ventilation
- Soft foam with closed cell (does not absorb water)
- Nylon 1000D
On the outside of the cell from sewn slings for attaching the pouches to the ALICE system, the analogue of ALICE from BLACKHAWK! That STRIKE, Uniclick, MOLLE, MALICE clips, SPEED CLIPS. The number of cells on the belts of all sizes odd
The belt fastens with fastex with additional fixation button, accidentally undoing excluded
Adjustment with fastex on both ends of the belt. The extra ends are bent and fixed with Velcro
The strap can be hung on the shoulder Strap universal light. For this purpose the ends of the straps must cover the looped belt and to be threaded under the MOLLE cell
The belt comes in several sizes
The product on the manufacturer's website: http://blackhawk.com/
Classic "Riggers Belt" ultra - reliable tactical Trouser belt, for attachment of the trigger devices can be used for rescue/emergency evacuation
Durable webbing width 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers. The tensile strength slings 3155 kg
The strap is made according to military standard MIL-STD-858 with the use of sewing technology and metal buckles parachute class
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt
Suspension for launching appliances used the ring of triangular form. When it is not, it is fixed along the surface of the belt by means of a valve closure. The same valve can be used for fixation of the belt relative to the press, which is necessary to clasp flap front Trouser belt loops
The free end of the strap is fixed with Velcro
The belt comes in several sizes
The product on the manufacturer's website: http://blackhawk.com/
Classic "Riggers Belt" ultra - reliable tactical Trouser belt, for attachment of the trigger devices can be used for rescue/emergency evacuation
Durable webbing width 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers. The tensile strength slings 3155 kg
The strap is made according to military standard MIL-STD-858 with the use of sewing technology and metal buckles parachute class
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt
Suspension for launching appliances used the ring of triangular form. When it is not, it is fixed along the surface of the belt by means of a valve closure. The same valve can be used for fixation of the belt relative to the press, which is necessary to clasp flap front Trouser belt loops
The free end of the strap is fixed with Velcro
The belt comes in several sizes
The product on the manufacturer's website: http://blackhawk.com/
Classic "Riggers Belt" ultra - reliable tactical Trouser belt, for attachment of the trigger devices can be used for rescue/emergency evacuation
Durable webbing width 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers. The tensile strength slings 3155 kg
The strap is made according to military standard MIL-STD-858 with the use of sewing technology and metal buckles parachute class
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt
Suspension for launching appliances used the ring of triangular form. When it is not, it is fixed along the surface of the belt by means of a valve closure. The same valve can be used for fixation of the belt relative to the press, which is necessary to clasp flap front Trouser belt loops
The free end of the strap is fixed with Velcro
The belt comes in several sizes
The product on the manufacturer's website: http://blackhawk.com/
Classic "Riggers Belt" ultra - reliable tactical Trouser belt, for attachment of the trigger devices can be used for rescue/emergency evacuation
Durable webbing width 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers. The tensile strength slings 3155 kg
The strap is made according to military standard MIL-STD-858 with the use of sewing technology and metal buckles parachute class
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt
Suspension for launching appliances used the ring of triangular form. When it is not, it is fixed along the surface of the belt by means of a valve closure. The same valve can be used for fixation of the belt relative to the press, which is necessary to clasp flap front Trouser belt loops
The free end of the strap is fixed with Velcro
The belt comes in several sizes
The product on the manufacturer's website: http://blackhawk.com/
Multifunctional durable waist belt
Available in two sizes : M, L.
Reliable buckle with separate ring (no trigger ring)
Internal hidden pocket for money zip
Department for plastic handcuffs (tie wrap)
Weight : 55 g
Size : 105x4.3 cm
Material: Nylon Webbing
Multifunctional durable waist belt
Available in two sizes : M, L.
Reliable buckle with separate ring (no trigger ring)
Internal hidden pocket for money zip
Department for plastic handcuffs (tie wrap)
Weight : 55 g
Size : 105x4.3 cm
Material: Nylon Webbing
Description:
Multifunctional durable waist belt. Available in two sizes : M, L.
Features:
Size :
105x4.3 cm
Material:
Nylon Webbing
Weight :
55 g
Technology:
reliable buckle with separate ring (no trigger ring)
internal hidden pocket for money zip
Department for plastic handcuffs (tie wrap)
Description:
Strong 50mm belt
Features:
Material:
Nylon Webbing
Technology:
with hook Velcro on the inside for fastening to fleece the lower Velcro strap Velcro (SKU 7747)
belt buckle with protection against accidental opening
available in four sizes
В
Description:
Strap with Velcro on the outside
Features:
Size :
105С…4,3 cm
Material:
Nylon Webbing
Technology:
normal belt for trousers
goes perfectly with external equipment belt Equipment Belt Outer (item number 7746)
В
Belt width 58 mm. It is possible to attach the pouches to the ALICE system, the analogue of ALICE from BLACKHAWK!, Uniclick, as well as the pouches with clips MALICE and with a simple strap
The belt is recommended to be used as unloading/pistol or as the inner belt in the universal "Nemesis-5" . Not recommended for use as a Trouser belt, K. it is too wide for most Trouser belt loops, tough and has a thick profile
The belt fastens with fastex with additional fixation button, accidentally undoing excluded
The belt is very rigid, holds its shape, not twisted
Adjusts with Velcro, with both ends of the belt. To secure the ends of the belt they wear two rings of thick elastic bands
The belt is available in two sizes
The product on the manufacturer's website: http://blackhawk.com/
Belt width 58 mm. It is possible to attach the pouches to the ALICE system, the analogue of ALICE from BLACKHAWK!, Uniclick, as well as the pouches with clips MALICE and with a simple strap
The belt is recommended to be used as unloading/pistol or as the inner belt in the universal "Nemesis-5" . Not recommended for use as a Trouser belt, K. it is too wide for most Trouser belt loops, tough and has a thick profile
The belt fastens with fastex with additional fixation button, accidentally undoing excluded
The belt is very rigid, holds its shape, not twisted
Adjusts with Velcro, with both ends of the belt. To secure the ends of the belt they wear two rings of thick elastic bands
The belt is available in two sizes
The product on the manufacturer's website: http://blackhawk.com/
Belt width 58 mm. It is possible to attach the pouches to the ALICE system, the analogue of ALICE from BLACKHAWK!, Uniclick, as well as the pouches with clips MALICE and with a simple strap
The belt is recommended to be used as unloading/pistol or as the inner belt in the universal "Nemesis-5" . Not recommended for use as a Trouser belt, K. it is too wide for most Trouser belt loops, tough and has a thick profile
The belt fastens with fastex with additional fixation button, accidentally undoing excluded
The belt is very rigid, holds its shape, not twisted
Adjusts with Velcro, with both ends of the belt. To secure the ends of the belt they wear two rings of thick elastic bands
The belt is available in two sizes
The product on the manufacturer's website: http://blackhawk.com/
Unloading belt
Removable inner strap
3-D mesh lining
Mounting points for TT Basic Harness
MOLLE System
FEATURES:
Material: Cordura® 700 DEN
Cub
Black
Khaki
The manufacturer's website: www.tasmaniantiger.info
Unloading belt
Removable inner strap
3-D mesh lining
Mounting points for TT Basic Harness
MOLLE System
FEATURES:
Material: Cordura® 700 DEN
Cub
Black
Khaki
The manufacturer's website: www.tasmaniantiger.info
Unloading belt Removable inner strap 3-D mesh lining Mounting points for TT Basic Harness System FEATURES: Material: Cordura® 700 DEN
Multifunctional durable waist belt
reliable buckle with separate ring (no trigger ring)
internal hidden pocket for money zip
Department for plastic handcuffs (tie wrap)
FEATURES:
Weight: 0.06 kg
Size: 105×4.3 cm
Material: Nylon Webbing
The manufacturer's website: www.tasmaniantiger.info
Multifunctional durable waist belt
reliable buckle with separate ring (no trigger ring)
internal hidden pocket for money zip
Department for plastic handcuffs (tie wrap)
FEATURES:
Weight: 0.06 kg
Size: 105×4.3 cm
Material: Nylon Webbing
The manufacturer's website: www.tasmaniantiger.info
Strap of nylon webbing with quick release buckle
If necessary, the belt can be cut to desired length. Edge you should definitely melted
Dimensions and weight:
Webbing width 30 mm
Long strap up to 115 cm
Weight - 55g
Strap of nylon webbing with quick release buckle
If necessary, the belt can be cut to desired length. Edge you should definitely melted
Dimensions and weight:
Webbing width 30 mm
Long strap up to 115 cm
Weight - 55g
FEATURES:
Product weight: 105 cm – 193 g
Product weight: 204 g.
Braided belt with metal buckle The main difference from the elastic belt (multidimensional) is a more dense weave structure Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort Has one belt loops Leather detailing Size buckle: 55×50 mm
Durable webbing outer with PU coating
There is a cast buckle made of anodized aluminum
For both uniform and casual clothes
Tough enough for comfortable wearing holster
The manufacturer's website: www.511tactical.com
Durable webbing outer with PU coating
There is a cast buckle made of anodized aluminum
For both uniform and casual clothes
Tough enough for comfortable wearing holster
The manufacturer's website: www.511tactical.com
Suspenders are removable with a small adjustment of the length. Accessories Duraflex® Suit trousers Highlander Suit pants Vector Fit trousers to Balance REVIEWS: The review on the website "Russel" Forum discussion
Product weight: 105 cm - 193 g
Product weight: 105 cm - 204 g
Product weight: 105 cm - 201 g
The strap is made from saddlery leather, consists of long and short shoulder parts and fittings, forming a loop for retraction capes in glass form. On the long part of the strap holes for spinka, short - buckle and two belt loops. The dimensions of the belt 3 and 4 growth. The long part, long 160 mm, the short portion 91 mm long, the connecting part 25 mm. With the aid of the belt can carry everything that can be mounted on 2 hinges up to the wood. Very comfortable and versatile thing. Skin. New. Made in the Soviet Union. Color: black.
Strap elastic, women's, ivory color.
Code:
5101
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 2.5 cm.
Strap elastic, women's, chocolate.
Code:
5104
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 2.5 cm.
Strap elastic, women's, olive.
Code:
5103
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 2.5 cm.
Strap elastic, women's, khaki.
Code:
5102
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 2.5 cm.
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle
Made in the classic style of thick elastic material
The main advantages of this model are the elasticity and, consequently, longevity
Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state
Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort
A large assortment of colors allows you to choose a strap to taste
Has one belt loops
Leather detailing
Dimensions:
Width: 35 mm
Size buckle: 55×50 mm
REVIEWS:
Review from manul_gray
Forum discussion
Braided belt with metal buckle
Made in the classic style of thick elastic material
The main advantages of this model are the elasticity and, consequently, longevity
Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state
Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort
A large assortment of colors allows you to choose a strap to taste
Has one belt loops
Leather detailing
Dimensions:
Width: 35 mm
Size buckle: 55×50 mm
REVIEWS:
Review from manul_gray
Forum discussion
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle Made in the classic style of thick elastic material The main advantages of this model are the elasticity and, consequently, longevity Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort A large assortment of colors allows you to choose a strap to taste Has one belt loops Leather detailing Dimensions: Width: 35 mm Size buckle: 55×50 mm REVIEWS: Review from manul_gray Forum discussion
Braided belt with metal buckle
Made in the classic style of thick elastic material
The main advantages of this model are the elasticity and, consequently, longevity
Changing the length of the belt depends on the type of activity and does not require periodic adjustment by using the buckle. After the necessary stretching of the belt is returned to its original state
Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort
A large assortment of colors allows you to choose a strap to taste
Has one belt loops
Leather detailing
Dimensions:
Width: 35 mm
Size buckle: 55×50 mm
REVIEWS:
Review from manul_gray
Forum discussion
Braided belt with metal buckle. Made in a classic style from a thick stretch material and leather. The use of rigid weave of elements eliminates the tension of the belt and gives exceptional durability. Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort. One has belt loops. The finishing of leather. Features: Width: 35 mm. Size buckle: 55-50 mm.
Bilateral, two-tone Non-metallic buckle is convenient for travel (no need to remove the belt during the inspection), if the safe disposal of explosive devices Longitudinal seams to make the belt stiffness The end is cut for easier threading of strap through the buckle Two sizes in width 1.5 inches and 1.75 inch The manufacturer's website: www.511tactical.com
Bilateral, two-tone
Non-metallic buckle is convenient for travel (no need to remove the belt during the inspection), if the safe disposal of explosive devices
Longitudinal seams to make the belt stiffness
The end is cut for easier threading of strap through the buckle
Two sizes in width 1.5 inches and 1.75 inch
The manufacturer's website: www.511tactical.com
Bilateral, two-tone Non-metallic buckle is convenient for travel (no need to remove the belt during the inspection), if the safe disposal of explosive devices Longitudinal seams to make the belt stiffness The end is cut for easier threading of strap through the buckle Two sizes in width 1.5 inches and 1.75 inch The manufacturer's website: www.511tactical.com
Bilateral, two-tone Non-metallic buckle is convenient for travel (no need to remove the belt during the inspection), if the safe disposal of explosive devices Longitudinal seams to make the belt stiffness The end is cut for easier threading of strap through the buckle Two sizes in width 1.5 inches and 1.75 inch The manufacturer's website: www.511tactical.com
Elastic belt, mens, chocolate.
Code:
5114
Size:
3х110 cm
Material:
Elastic cords + leather
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 3.5 cm
Elastic belt, mens, blue.
Code:
5115
Size:
3х110 cm
Material:
Elastic cords + leather
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 3.5 cm
Elastic belt, mens, black.
Code:
5116
Size:
3.5х110 cm
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 3.5 cm
Elastic belt, mens, olive.
Code:
5113
Size:
3х110 cm
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 3.5 cm
Elastic belt, male, khaki.
Code:
5112
Size:
3х110 cm
Material:
Elastic cords + leather
Description
Made of high quality elastic cords and leather. Perfect for any figure. Elastic base allows to adapt to the breath, sports and other action. Belt width: 3.5 cm
Belt with hidden pocket
Code:
2863
Weight:
100 g
Size:
3х130 cm
Material:
polyester; steel
Artikel - color
2863.040 - black
2863.343 - khaki
Description
Available in two colors :
art. 2855.040 - black
art. 2855.343 - khaki
Benefits and features
adjustable-length belt
internal zip pocket
Belt with hidden pocket
Code:
2863
Weight:
100 g
Size:
3х130 cm
Material:
polyester; steel
Artikel - color
2863.040 - black
2863.343 - khaki
Description
Available in two colors :
art. 2855.040 - black
art. 2855.343 - khaki
Benefits and features
adjustable-length belt
internal zip pocket
Belt with a hidden pocket for money.
Code:
9241
Size:
3х110 cm
Material:
Nylon
Description
Buckle featuring fastex. A hidden zipper pocket to store money. The length is adjustable.
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Installation instructions belt on and packs: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 423 g (for medium size) * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular unloading belt which can be used in the form of CPF, and as a simple one. Free saturation pouches depending on task The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips Built-in belt from 50 mm webbing and fastex Duraflex®. The superfluous ends of the belt are cleaned under the front panel with cells of PALS. If necessary, you can remove the fastex, to hide or to cut off all lines and pushed through the belt, any strap Back surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness Two layers of foam inside, hard thin and thick semi-rigid Use as a PSA: The belt has four points of suspension for H - or X-shaped elastic straps – plastic-ring Duraflex®. Belt ideal for use with "v Straps Lightweight.3", as well as all other straps with four-point suspension Use with backpacks and rucksacks: The belt can be attached to most tactical and Hiking backpacks and satchels companies Alloy and some other manufacturers, provided that the original belt is removable. For this the back cover of the belt with the sheathed cells PALS Velcro-loop and laterally retractable sewn under the back panel of the special webbing width 25 mm and 38 mm Installation instructions belt on and packs: If the original belt is a simple webbing width 38 mm or 50 mm, threading dvuhmetrovye buckle sewn to the lower corners of the backpack/knapsack: 25 mm webbing belt to hide under the front panel as unnecessary. 38 mm webbing belt to slip in dvuhmetrovye buckle backpack/satchel, to pull the extra ends to hide the lines under the front panels of the belt If the original belt - anatomically shaped, is attached by threading the belt under the lumbar pillow backpack (inside fastened with Velcro) and side braces (for the belt on each side 1-2 slings 25 mm, pack 1-2 trendeleva buckle): Insert the belt under lumbar cushion backpack, to check the adhesion of the Velcro. 38 mm webbing belt to hide under the back panel is useless. 25 mm webbing belt to pass trendeleva in the buckle of the side braces of the backpack, to pull the extra ends to hide the lines under the front panels of the belt The belt is available in three sizes, differing only in the number of cells of each PALS on the front panel: A small, 4 cell, minimum girth of the figure 84 cm Average, 5 cells, minimum girth of the figure 92 cm Large, 7 cells, the minimum girth of the figure 106 cm
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Accessories: Duraflex® Weight: 400 g Available in three sizes: 46-52, 54-58, 60-64 * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerModular discharge zone of the raised comfort, the entire length allows mounting of the system of PALS and ALICE. Free saturation pouches depending on task For use inside belt strap is inserted, optional. Recommend straps Universal 50 mm v Universal.2 , the Belt US The belt has six suspension points of the shoulder straps. Compatible with straps "Nemesis-5" v lightweight and Versatile.3, as well as all other straps, with a four - or six-point suspension The suspension straps on semi-rings Duraflex®. Two rear and two front for vertical lines, double on the sides for inclined lines (individual lines for each ring) The belt has a wide curved anatomical shape, making it comfortable and distributes the load to the hips. It also allows for a small load to wear the belt without the straps The inner surface of the trimmed volume mesh Coolmax Airmesh® for ventilation and softness At the bottom of the belt on each side there are slots in hiding loop for hanging platforms, and thigh holsters (in these loops is passed is going on inside of belt strap) Feature of belt is that unlike the majority of similar curved belt MOLLE cell suspension of pouches sewn entirely one after the other, without breaks, and can be hung along the entire length of anywhere with a pitch of 37 mm without restrictions
Description:
Strong 50mm belt
Features:
Material:
Nylon Webbing
Technology:
with hook Velcro on the inside for fastening to fleece the lower Velcro strap Velcro (SKU 7747)
belt buckle with protection against accidental opening
available in four sizes
Durable waist belt with a secret pocket.
Size: 130х4,3 cm
Material: Textreme 11.1
Color: black; cub;
Features:
Durable metal buckle.
Loop on the inner side.
Secret zipper pocket.
Strap HAPPY OUTDOOR GREENLAND 125 cm
Lightweight and durable jacquard strap with aluminum buckle.
Material: nylon, brass buckle
Length: 125 cm
Width: 3 cm
This belt combines durable nylon base and a patented quick-release AustriAlpin buckle. Great for everyday use
Easy stepless adjustment (without holes)
Material: 100% nylon
Length: 130 cm
Weight: 218 g
This belt combines durable nylon base and a patented quick-release AustriAlpin buckle. Great for everyday use
Easy stepless adjustment (without holes)
Material: 100% nylon
Length: 130 cm
Weight: 218 g
This belt combines durable nylon base and a patented quick-release AustriAlpin buckle. Great for everyday use
Easy stepless adjustment (without holes)
Material: 100% nylon
Length: 130 cm
Weight: 218 g
This belt combines durable nylon base and a patented quick-release AustriAlpin buckle. Great for everyday use
Easy stepless adjustment (without holes)
Material: 100% nylon
Length: 130 cm
Weight: 218 g
Braided belt with metal buckle
Made in the classic style of thick elastic material and skin
Used in the weaving elements and the soft leather gives the product extra rigidity and stylish appearance
Due to the absence of adjustment holes, woven structure of the belt allows you to fasten it in any place convenient for you, which greatly increases the wearing comfort
Has one belt loops
Leather detailing
Dimensions:
Width: 35 mm
Size buckle: 55×50 mm
Simple, reliable and lightweight belt for trousers
The width of the belt 1.75" inches (4.5 cm), ideal for wearing with trousers BDU, ACU, TSU , as well as urban tactical pants from different manufacturers
Durable nylon webbing
For adjusting and fastening the belt buckle is metal, which under load tightly locks the belt. The buckle has a slim profile
The free end of the strap tucked under a ring of thick elastic bands
The strap is dimensionless. If excessive length of the belt allowed the circumcision of the extra lines, with the obligatory slice of melting
The product on the manufacturer's website: http://blackhawk.com/
Durable, comfortable and functional strap
Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro fastener. If necessary the belt can be used for belaying when climbing
Durable nylon webbing with a width of 4 cm does not deform under load
Reinforced seams
3 colors
The manufacturer's website: www.511tactical.com
Durable non-metallic, low profile plastic buckle Durable netting slings Sling does not fade from wear, in the wash or from sun exposure Triple stitching seams Sizes from S to 4XL. If You plan to wear on your belt (holster, handcuffs, etc.), recommend choosing a belt one size larger 3 colors The manufacturer's website: www.511tactical.com
Durable non-metallic, low profile plastic buckle Durable netting slings Sling does not fade from wear, in the wash or from sun exposure Triple stitching seams Sizes from S to 4XL. If You plan to wear on your belt (holster, handcuffs, etc.), recommend choosing a belt one size larger 3 colors The manufacturer's website: www.511tactical.com
Durable non-metallic, low profile plastic buckle Durable netting slings Sling does not fade from wear, in the wash or from sun exposure Triple stitching seams Sizes from S to 4XL. If You plan to wear on your belt (holster, handcuffs, etc.), recommend choosing a belt one size larger 3 colors The manufacturer's website: www.511tactical.com
Durable, comfortable and functional strap Reliable black stainless steel buckle (to hold the weight of 2500 kg), additional insured Velcro. If necessary the belt can be used for belaying when climbing Durable nylon webbing with a width of 4 cm does not deform under load Reinforced seams 3 colors The manufacturer's website: www.511tactical.com
Ask a question
Sale
Price from 1 710 р.
Price from 1 800 р.
Price from 2 520 р.
Price from 2 070 р.
Price from 1 260 р.
/2907/PoliceShirt_sg_ls-150x150.jpg)
Price from 1 080 р.
/2907/PoliceShirt_sg_ss-150x150.jpg)
Price from 1 035 р.
Price from 2 970 р.
Price from 2 700 р.
Price from 4 860 р.
Price from 1 350 р.
/kurtki4/SAS-black-150x150.jpg)
Price from 9 553 р.
/2907/PoliceShirt_w_ss-150x150.jpg)
Price from 1 035 р.
Price from 2 070 р.
Price from 2 700 р.
Price from 1 800 р.
Price from 2 115 р.
Price from 2 970 р.
Price from 1 080 р.
Price from 2 610 р.
Price from 4 311 р.
Price from 1 215 р.
Price from 630 р.
Price from 1 620 р.
Price from 2 430 р.
Price from 1 260 р.
/kostumi/mpa20-cifra-150x150.jpg)
Price from 1 170 р.
Price from 4 451 р.
/2907/PoliceShirt_w_ls-150x150.jpg)
Price from 1 080 р.
Price from 639 р.
Price from 1 944 р.
Price from 2 340 р.
Price from 2 610 р.
Price from 3 335 р.
Price from 2 880 р.
Price from 720 р.
Price from 2 880 р.
/kurtki3/AlaskaLong-black-150x150.jpg)
Price from 7 634 р.
/bryki/bekas-blackSG-150x150.jpg)
Price from 1 920 р.
Price from 540 р.
Price from 3 080 р.
Price from 4 860 р.
Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied). Fabric - gabardine. According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons. Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress. Allowed wearing summer without a handkerchief in the back office. The length of the lower edge must be at knee level. Dress Police\ Justice short sleeve is part of the form the police of a new sample
Dress semiadherent silhouette dark blue color with V-neck, decorated with silk red handkerchief (supplied).
Fabric - gabardine.
According to the order of the Ministry of internal Affairs of Russia No. 575, chevrons sewn on the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer\of justice. You can extend the Velcro chevrons.
Shawl to the dress worn folded in a triangle gusset plate, narrow ends communicate with each other and fill them inside the back under the collar. The wide face tucked inside under the neckline of her dress.
Allowed to wear summer dresses without a handkerchief in the back office.
Dress length at the bottom edge should be at knee level.
Dress Police\ Justice short sleeve is part of the form the police of a new sample.
Jacket:
- free cut;
clasp Central side, windproof placket, buttoned;
- Flirty from the fabrics;
- 2 Welt slant pockets with flap, buttoned down the front;
- on the sleeves 1 overhead inclined pocket;
- in the elbow reinforcing figured overlay;
a bottom of sleeves on an elastic band;
- hood double, with a visor, has a tight slide to adjust the volume;
- the fit at the waist with the help of wings;
Pants:
- tailor made;
- 2 side vertical pockets;
- in the knee area, the rear halves of the pants along the seam of the seat – reinforcing plates;
- 2 side patch pockets with flap;
- Overhead figure 2 rear pockets with button closure;
- cut parts in the knee area prevents them from stretching;
- rear half below the knee gathered elastic band;
- elastic waist;
- bottom elastic band;
- clip-on suspenders (braces);
- belt loops;
wearing – and the boots and trousers.
material: tent fabric;
composition: 100% cotton;
density: 270 gr.;
lining: the ripstop fabric, Oxford 600;
cuff: Yes;
sealing gum: Yes;
pockets jacket/pant: Yes/Yes;
optional: lightweight summer option;
high strength fabric and seams;
The tunic is part of our daily and weekend uniforms of police officers of the new model. Worn with trousers. Material: Suiting (wool blend) fabric. Composition: 75% wool, 25% 280 g/m2 Lining: Twill 100% 105% g/m2. Adjacent cut, single breasted, fastened with four buttons. Turn-down collar with lapels. Shelves with cut barrels. Horizontal Welt side pockets in the "frame" with the valves. Back with a Central seam, in the lower part there is a slot. Vtachnoy sleeve, double seam. Jacket with leather sleeves. The left side of the lining is the inside pocket with "leaflets". Is designed for employees of internal Affairs authorities with special ranks of police, and also for the cadets (listeners) of educational institution of higher professional education of Russia. Has red trim on the sleeves. According to the order of the Ministry of internal Affairs of Russia No. 575, sewn on the sleeves of the costume at a distance of 8 cm from the edge of the shoulder. On the left sleeve sewn Chevron meaning belonging to the Ministry of internal Affairs of Russia, and on the right a Chevron denoting the service of a police officer. You can extend the Velcro chevrons. In addition, at this sewed epaulettes with buttons, and reinforced two lapel badges. How to sew a shoulder strap? To do this, except for the jacket and a shoulder strap, you will need a ruler, scissors, needle, thimble and strong thread red. Be sure to wear a thimble, even if you are used to sew without it, because sometimes through the needle passes with great difficulty, and could injure your fingers. If you have difficulty pulling the needle and thread from the shoulder strap, you can use the pliers or tweezers. 1) First, prepare the shoulder straps, E. attach all required insignia, as to do it on the already sewn the race will be much harder. 2) Take a shoulder strap and have it so that the side, remote from the closure, was in the fence to the seam that joins the shoulder of his tunic sleeve. At the same time, top aimed toward the back, the edge of the chase got 1 cm to go on top of the seam running along the shoulder. In other words, the shoulder straps should be slightly shifted forward. 3) Pass the needle and thread secure the shoulder straps to the jacket at three points: at the corners of the chase, at the place where he comes into contact with the sleeve seam and in the center of a semicircular cut. Now the shoulder straps will be secured and will not shift from the correct position in the process of sewing. 4) Then very carefully sew the shoulder straps around the perimeter, making the stitches so that on its surface could only barely visible dots at the places where the needle enters the ring, and the thread between two adjacent holes were mostly on the wrong side (the lining) jacket. Then the thread will not be noticeable even if it the color does not quite match the color of the shoulder straps. The optimal length of each stitch should be about 1 cm. 5) With the second shoulder strap follow the same pattern. How to strengthen the lapel badges? On the collar of his jacket is on the bisector (the line that divides the angle of the collar in half), at a distance of 25 mm from the corner of the collar to the center of the logo, the vertical axis of symmetry of the logo should be parallel to the departure of the collar. How to place awards on the police uniform? On the left side of the chest awards are in the following order: A special sign of distinction are arranged so that the upper edge pads the medals was at the level of the ledge of the lapel of his tunic and jacket. When wearing two or more special characters differences, they are separated in one row, from right to left at intervals of 10 mm between the side ends of the stars in the order listed. A special sign of distinction of one denomination are placed in the order of their awarding. Signs of orders, decorations and medals are laid out horizontally in a row from the center of the chest to the edge, from top to bottom in the order listed. When wearing two or more orders or medals of their pads together in a row on the common plank. Medals that does not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in the above order. Pads orders and medals of the second row should go under orders and medals of the first row, the upper edge of the Shoe bottom row is placed at 35 mm below the pads of the first row. Subsequent rows are arranged in a similar manner. Signs of orders, decorations and medals are on the jacket single breasted police so that the top edge of pads of the orders and medals of the first row located below the level of the ledge of the lapel on 90 mm. On the right side of the chest awards are in the following order: Order are arranged left to right in the order listed. The upper edge of the maximum size of the order of the first row are arranged at the level set for overall straps (pads) of the first row of orders and medals placed on the left side of the chest. Orders that do not fit in one row are transferred in the second and subsequent rows placed below the first, placing them from the center of the chest to the edge in order. The centers of orders in a series must be at the same level. The distance between the orders and ranks of the order of 10 mm. The sign of the number of injuries from lace Golden color (if severe injury) or dark red (light wound), you'll be on the strip of fabric top products. Width of braid 6 mm, length 43 mm. Stripe of the critically injured is located below the stripe on minor injuries. The distance between stripes of 3 mm. The sign of the number of wounds placed on the tunic and jacket to the right of the sign to honorary titles of the Russian Federation, and in his absence, in his place.
Material: -Classic pants with piping on side seam. -The volume of the belt is regulated by side panels with elastic braid. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging red
The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon
The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon
Note - in this model, the insulation of a fleece jacket just in!
Colors : khaki
Jacket:
- free cut;
clasp Central side, windproof placket, buttoned;
- Flirty from the fabrics;
- 2 Welt slant pockets with flap, buttoned down the front;
- on the sleeves 1 overhead inclined pocket;
- in the elbow reinforcing figured overlay;
a bottom of sleeves on an elastic band;
- hood double, with a visor, has a tight slide to adjust the volume;
- the fit at the waist with the help of wings;
Pants:
- tailor made;
- 2 side vertical pockets;
- in the knee area, the rear halves of the pants along the seam of the seat – reinforcing plates;
- 2 side patch pockets with flap;
- Overhead figure 2 rear pockets with button closure;
- cut parts in the knee area prevents them from stretching;
- rear half below the knee gathered elastic band;
- elastic waist;
- bottom elastic band;
- clip-on suspenders (braces);
- belt loops;
wearing – and the boots and trousers.
material: tent fabric;
composition: 100% cotton;
density: 270 g.;
lining: the ripstop fabric, Oxford 600;
cuff: Yes; sealing gum: Yes;
seasonality: demi;
optional: reinforced insert, a removable fleece-lined boots on his trousers, suspenders included
Jacket combined(stitched and removable) insulated lining, removable insulated hood, removable faux fur collar. The jacket is cropped, straight leg. Front zip detachable two-way zipper, closed windproof flap with buttons. Collar turn-down with snap closure-patoy on a textile fastener. In the shoulder seams are on the buttons with removable fullpagename for attaching insignia. Shelves and back with flirt. On line coquettes – edging of red. Two chest pockets with flaps with buttons and textile fasteners "vel'kro". Two side pockets with flaps on buttons and textile fasteners "vel'kro". The burlap patch pockets Welt pockets at "lightning". At the bottom of the cutting zone, the volume of which is adjustable by side panels with elastic tape stitched on multi-needle spec. machine with chain stitch. Vtachnoy sleeve, double seam. On the right sleeve Welt pocket on "lightning". Inside pocket sewn headband with reflective tape, fastened with the Velcro fastener "vel'kro". On bottom of sleeves stitched cuffs with elastic tape stitched on multi-needle spec. machine with chain stitch. Stitched insulated lining with insulation "Fiberteck-200" on the inner side of the left shelves is under the gun pocket ( with a carabiner on the cord to fasten the gun ), and patch pocket with vertical zipper. Removable insulated hood detachable fastened on zipper. The volume is adjustable on the back of the neck and face. The chin part fastens with the Velcro fastener "vel'kro". Detachable collar made of artificial fur that contains fiber "Kanecaron" (Production Japan) is fastened on the separable zipper. Removable insulated lining (vest) of insulation "Fiberteck 150" quilted on both sides with lining fabric, detachable snap-on "lightning". Removable insulation is patch pocket with a horizontal entrance on "lightning". Fiberteck insulation has several advantages over traditional fillers:- Keeps its shape and restores it after washing. - Allowed multiple washing and drying. - Provides greater heat-shielding effect compared with other materials of similar thickness and density. - Humidity resistant. - Sustainable in the long run. - Is environmentally friendly and non-toxic insulation. - Practical in terms of price and quality.
Winter jacket, THE 2012.
Material: the wool -Classic pants with piping on side seam. -On the belt 6 of the belt loops under the belt. -Two side pockets. One Welt pocket with flap on the back half of trousers. -Side seam - edging red
Set of windproof smoke (jackets) and warm with the liner of Primaloft® insulation Black, which can be worn separately as a standalone jacket Smoke: Can be worn with or without podstezhkoy High and wide of the goal. Hood with visor, which is inserted in the plastic to give rigid form. For careful adjustment of the hood has three adjustment Front zipper with two locks, unbuttoned both the top and bottom Windproof flap covering the front zipper Cuffs with Velcro for fine adjustment of the circumference of the wrist Valve front zipper and pockets fastened with canadian (on tape leg) buttons, which have greater reliability than with conventional buttons. are large in size, making them convenient to operate in thick gloves Voluminous pockets on the torso are of the bend entrance, protecting the contents from falling out Pockets: 2 large pockets on the chest 2 large pockets at the bottom of the jacket 2 pocket "Napoleon" with zipper on the chest one flat pocket on the left sleeve and one inner left zip Laces: at the waist and bottom of jacket, with elastic cords for protection against the cold under clothing Undercoat: Quilted lining with insulation that extends the life of clothing (insulation remains in place when cleaning or washing) Fastening to the smoke and buttoning when wearing as a separate jacket, are made with the help of convenient lenticular buttons of the American model Hood, adjustable oval face. For comfortable wear the inner part of the hood trimmed with fleece Vents on the armpits Knitted cuffs for comfort Inner left pocket zipper The material of products: The main fabric smoke: Strong (high-density differs from the counterpart used in the form of an Alloy), 35% cotton, 65% polyester Lining smoke: thin blended fabric, 35% cotton, 65% polyester The main fabric of the liner: 100% polyester Insulation liner: body - Primaloft® Black 2×133 g/m2 sleeves - Primaloft® Black 2×80 g/m2 Product weight: 46/176 R-R – 1969 50/176 R-R – 2097 g 54/182 R-R – 2181 g 56-58/188-p – 2439 g The website also presents the model of pants with insulation Primaloft® YOU MAY BE INTERESTED IN:
Without Velcro under the chevrons. The size is given on the collar. You can use shoulder straps Worn worn outside The belt is adjustable in size using the side elastics 2 pockets on the chest Material: 65% 35% Rayon
Women's demi-season raincoat is part of the uniform of the police of a new sample.
Cloak semiadherent silhouette, with a Central courtyard, a hidden zipper on five loops and buttons and an additional button shaped top and through the loop sewn on stitched insulated lining.
On the quaint in the shoulder seam is provided by two belt loops, one slit and not a loop for securing detachable shoulder straps.
Vtachnoy sleeve, double seam. In the lower part of the middle seam of the sleeve vacany stalemates, fastened with loop and button shaped.
Turn-down collar, with a cutting counter.
Removable belt fed through the belt loops located at side seams and fastens with a buckle with a tongue, the free end, which is fed through the belt loops.
For the right selection - internal Welt pocket with leaflets.
Fabric jackets (100% polyester) with threads of the weave rip-stop and water-repellent impregnation.
The second layer of the membrane.
Filler: Thinsulate 100 g/m.
Recommended temperature range: from +10°C to -12°C.
Worn with a neck scarf in dark blue or white scarves.
Permitted the wearing of a neatly-folded coat demi nicevoicelady out on the left hand.
The demi-season coats are buttoned up. Permitted the wearing of coats demi-season with the upper button unfastened. Coats demi-season wear with removable insulation with or without buttoned buckle belt.
This cloak is worn removable shoulder straps dark blue stripe and dark blue.
Thanks to innovative technology and quality materials, provides maximum protection from rain and wind, you'll be in constant comfort that helps reduce fatigue throughout the day.
Features
Protection from rain and wind
Share cut
Upper material: Rip-stop
Insulation: Thinsulate
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III.
Pants MPA-28:
- 2 side patch pockets with flaps with Velcro;
- lateral areas of the belt tight elastic band;
- at the bottom of the side seams - "lightning";
- perforated elastic band for attachment to shoes.
The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Material: Polyester 65% , 35% The fabric is very resistant to fading Weave: Twill 2×1 Fabric weight: 245 g/m2 Dyeing fabric: Dispersion-active, by Japanese technology, superiority WR - odottamassa finish
BOOTS WITH HIGH BERTSAMI
Top: natural chrome leather (1.4 – 1.6 mm)
Lining: the natural sheepskin.
Sole: TEP (±40°C), 3521.
Method of attaching soles: glue stitching.
Arch support: metal
Toe and heel: from reinforced thermoplastic
material.
Dimensions: 36-50.
Semi-deaf valve. Padded collar.
Color: black
Weight: 730 gr.
Modifications: Model 180 fake fur.
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III.
Pants MPA-28:
- 2 side patch pockets with flaps with Velcro;
- lateral areas of the belt tight elastic band;
- at the bottom of the side seams - "lightning";
- perforated elastic band for attachment to shoes.
The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III.
Jacket MPA-26:
- 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment;
- ventilation holes protected by mesh;
- adjustment on waist and bottom;
- the collar;
- adjustable, removable hood;
- close the ventilation holes;
- taped zippers.
The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Material: gabardine
-Women's pants with piping on side seam.
-The volume of the belt is regulated by side panels with elastic braid.
-On the belt 6 of the belt loops under the belt.
-Two side pockets.
One Welt pocket with flap on the back half of trousers.
-Side seam - edging of red color
fabric gabardine for employees of state fire service of EMERCOM, the colour is grey-blue. According to the Order of the Ministry of emergency situations, should have smoothed longitudinal folds.
The cap of the Ministry of defence (office). Cap made of ripstop fabric, olive color.
According to the provisional regulations No. 256/41/3101. On caps and caps is a sign of distinction on belonging to the bodies of Executive power where the law provides military service (the cockade of Golden color), high-ranking officers, in addition, the visor and the cap band with sewing Golden color.
The suit includes pants and. The jacket is straight cut. Stand – up collar, adjustable volume, patoi on a textile fastener. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. The pockets are tilted, the hands. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener, with belt loops ribbon belt from the inner side of the valves. In the elbow pads-amplifiers with input protectors on textile fasteners. At the bottom of the sleeves – pockets for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with hidden button closure.In the area of seat trim amplifier Fabric: Mirage-210, PE-67%, CL-33%
The classic model
You can use shoulder straps
Worn worn outside
The belt is adjustable in size using the side elastics
2 pockets on the chest
Material:
65% Polyester
35% Viscose
Attention! At the moment it is available in two versions:
- with Velcro-base (loop) for Chevron
- without the basics
Please when ordering to specify the desired variant.
Fabric: "Panacea" Composition: 67% polyester, 33% viscose 155 g/m2 The costume consists of trousers and Jacket straight cut:-turn-down collar;-Central zip closure covered by a windproof plank;-2 patch pockets with flaps on the chest;-2 patch pockets with flaps on the sleeves with Velcro;amplifiers on the elbows made from the main fabric; Pants straight cut-Central zip closure;-six belt loops under the belt on the belt;Side -2 side pockets, 2 side overhead volume pockets and 2 patch pockets with flaps rear;amplifiers on the knees of the base fabric.
ASSAULT BOOTS URBAN TYPE
Top combo: natural chrome leather
(1.2 – 1.4 mm)+ soft edging and an elastic valve
genuine leather.
Lining: the mesh is laminated.
Sole: rubber with increased wear resistance (Italy),
BUTEK 1.
Method of attaching soles: adhesive.
Arch support: metal.
Toe and heel: from reinforced thermoplastic
material.
Dimensions: 40-46.
Semi-deaf valve. Padded collar.
Color: black.
Weight: 580 gr.
The size is given on the collar. Without Velcro under the chevrons. You can use shoulder straps Worn worn outside The belt adjusts to fit with side elastic 2 pockets on the chest Material: 65% 35% Rayon
Jacket in the style of "Retro" Buttons Hood, adjustable oval face Elastic band on waist and bottom of sleeves The bottom adjusts to fit with cord 4 external pockets Material: 100% cotton YOU MAY BE INTERESTED IN: "And often in the evenings, in the evenings, when I feel a sense of comfort, blow suddenly crackling fires from the blue edge of the gas ring stove..." ( B.Vahnjuk) When using home, we buried the face in jackets hanging on a hanger, and breathed in the smell of fire. In stormovik went on any trips at any time of the year. They didn't prokusyvanie mosquitoes, it was not insufflated, does not melt from campfire sparks. Really from freezing, slowly dried up and were too heavy. Now, when there was plenty of light modern canvas jackets real jackets are found quite rarely. But now for the forest fire and it is better not to find. Synthetic fire doesn't like. And if you don't want your favorite fleece was on small (or large) hollow-it's time to think about the tarp. Jacket "Retro" style made of high quality canvas. It is very durable, breathes well. And generally pleasant and loved as songs Vizbora on reel-to-reel recorder. Adjustable oval face hood, stretch sleeves and tightening down jackets protect and wind. Matches, compass, map and other necessary items will easily fit in four voluminous pockets. If you like watching the sunrise on a steep Bank, wander through the summer tundra, to gather cloudberries and cranberries in the bogs, singing evenings around the campfire – this jackets for you.
Top: natural chrome leather (1.4 – 1.6 mm).
Lining: the natural sheepskin.
Sole: TEP (±40°C), 2050.
Method of attaching soles: glue stitching.
Arch support: metal.
Toe and heel: from reinforced thermoplastic
material.
Dimensions: 36-50.
Deaf valve protects the foot from impact
the environment (dust, water, dirt). Hooks.
Padded collar.
Color: black.
Weight: 840 gr.
Staff costume consists of pants and shirts with short sleeves, made of lightweight fabric that does not crumple, does not fade and does not lose its shape even after numerous washings.
Staff costume consists of pants and shirts with short sleeves, made of lightweight fabric that does not crumple, does not fade and does not lose its shape even after numerous washings.
Straight silhouette, length to mid-thigh Hood with detachable fur, adjustable volume and oval of the face Insulated with two layers of batting, which is 270 g/m2 The polyester lining quilted together with synthetic padding that extends the life of clothing (insulation remains in place when cleaning or washing) Front zipper with two locks, unbuttoned both the top and bottom of the jacket Windproof inner and outer flaps covering the front zipper; the edge of the hood; high collar and bottom of sleeves, adjustable in size through Velcro with inner knitted cuff prevents penetration of the cold under clothing Windproof and flap pockets on the chest are fastened by large buttons that are easy to use with gloves on Pockets: two pockets on the chest and two on the sleeve two inside pockets four pockets at the bottom of the jacket Laces: waist and bottom of jacket Material: 100% polyamide with coated Product weight: 46/176 R-R – 1140 g 50/176 R-R – 1207 g 54/182 R-R – 1302 g 58/188 R-R – 1430 g Designed as a battle jacket that involved a serious of tests and trials, experiencing bursts of popular worship and periods of cooling, it is returned to us calm and confident in its reliability, functionality and durability. Warm, durable, windproof and water-repellent due to the used in the manufacture of fabric (100% polyamide with coating), Alaska provides all-around protection from snow, wind, moisture and cold. Insulation – two layers of synthetic fiber padding polyester (270 g/m2), which, unlike the Pooh nasasyvaet moisture and is not afraid to frequent washings. The polyester lining quilted together with him, which increases the service life of the jacket (sintepon remains in place when cleaning or washing). In contrast to the expensive membrane fabrics and down insulation, these materials do not require special care and not raise the price of the jacket in the clouds. Typical of "Alaska" with a fur edge, in combination with a high collar that closes when you need almost all face, and is adjustable in volume and oval of the face. The edge, is made from natural or artificial fur (of your choice) can come unfastened from the hood. The inner part of the gate and in contact with the face edge of hood trimmed with soft fleece. A major barrier to wind and cold are also windproof external and internal valves two-way front zipper, utgivelsen cord waist and bottom of jacket. Sleeves with inner knit cuffs are regulated armors Velcro. Length (mid-thigh) allows you to be long in the cold, and the loose fit does not restrict movement. Large allow you to unbutton the jacket with the gloves. Voluminous, warm front pockets are covered with soft knitted fabric, and the large upper pockets allow you to undo them with gloves on. Except for the six front pockets, two pockets on the sleeve and two internal. Warm comfortable long stay in the cold.
Patent No. 46636. from the upgraded version of the Soviet hopping suit for special forces, known as "Mabuta". Recommended for security services Free, not hampering the cut In the suit used stainless button Too high waist for comfort and ease of carrying ammunition on the belt. The sides of the belt potrasenoy The loops wide waist belt Reinforcing pads on the knees Folds in the knees for anatomical cut Zipper fly The belt fastens with two buttons The bottom of the pants Podrabinek, inside sewn covers are made of thin cotton calico. The anthers are equipped with stripgame of gum. It is recommended to fill in anthers shoes, and the Trouser leg to fit over boots Pockets: pockets on the front thighs with the entrance on top of the two buttons. The entrance pockets is folded to protect the small content from falling out rear inset pocket on the right side on the two buttons on the right leg side pocket for hook knife or bayonet-knife. Pocket has podrezany entrance, flap on two buttons. Sewn inside the webbing, forming cells for self-fastening of the sheath side inset pockets Material: "Rip-stop": 53% cotton; 47% polyester "Gretta": 53% cotton; 47% polyester "Standard": 60% cotton; 40% polyester Product weight: 46/176-p – 589 g 50/176-p – 654 g 54/182 R-R – 690 g 58/188 R-R – 703 g SIZE: Download Dimensional grid (.xls) to accurately determine the correct size REVIEWS: Review from tankist_sssr YOU MAY BE INTERESTED IN:
Lines: 100% nylon Thread: Liberty® (Netherlands) filament nylon bonded Material: Cordura® 1060d (100% nylon) Oxford 210d (100% nylon) Accessories: Duraflex® Velcro: Alfatex® (Belgium) Weight: 1100 g * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Classic with sewn pockets for gear Rifleman and cells PALS for mounting additional pouches Compatible with a climbing harness Pockets include draining water All pockets are fastened by Velcro, with the easy manners of slings The jacket fastens with a zipper reinforced tractor long skill of braiding. Zipper for secure closed with a strap with Velcro to protect from pollution and removal of the load On the underside of the sewn loops for releasably attaching the unloading/pistol belt Adjusting the size of vest (from 46 to 68) is located on the sides of the lumbar panel and are made using slings and trendeleva buckles Duraflex®, you can adjust the size directly into put on the vest. With each side on three lines. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum Adjustment increase (from 164 to 200 cm) is located on the bottom edge of the Basque is back and with two vertical lines and trendeleva buckles Duraflex® connecting the yoke and lumbar panel. You can set up right for wearing on a vest. Slings have excess length – excess can be cut, with the ends of the lines necessarily need to melt off! The extra ends of a sling wrap and hide under the ring out of gum On top of the flirt-stitched loop slings evacuation and PALS – 6 cells in width, 3 rows in height slings (sewn completely to each other without gaps) On lumbar panel stitched two semi-rings Duraflex® suspension with bread bags on hooks-carabiners and slings PALS – 6 cells in width, and 7 rows in height slings (sewn completely to each other without gaps) Top stitched at shoulders limiters and automatic belt PALS webbing on each shoulder by 2 cells wide, 2 rows of lines in height (with the period) 4 pockets for shops, each with a capacity of 2 to store the AKM/AK-74 or RPK-1/RPK-74. Height adjustable Velcro valve, the volume shrinks sewn a wide elastic band to protect from rocking content. 2 extreme vest pocket sewn to the base so that their rear wall forms a hidden flat pockets to the entrance from the top, in which you can transfer 1 of the CPR 4 pockets for hand grenades on his chest. Each has an internal pocket under the fuse and the carabiner on the cord and a clip-on to check for arming grenades with one hand 1 pocket for fireworks on the right side of the trunk. Open top with elastic walls to protect contents from falling out, to carry 3 RB, or 1 RAD or 1 RDG 1 pocket for the bayonet on the left side of the trunk. Simple pocket with an open top, a carabiner on the webbing for fastening of a sheath and a buckle tie closure. Can be used for carrying 1 RAD or 1 RDG Pocket for fitting of the rubber bands with a buckle on the button, on the left side of the chest near the main zipper Pocket for personal dosimeter on the right side of the trunk near the main zipper and open top 2 inner pockets for flat items (map, scarf, etcp.) with the input of Velcro, provide short-term protection from moisture On the sides of the torso stitched PALS webbing on each side for 3 cells in width, 3 rows of lines in height (with the period)
Copyright militaristwear.com
