Gloves

489 products, 8 reviews, 33 videos
No products to compare
Sorting
Number:
Size
Бренд
Time of year
The type of clothing
Color
Appointment
Material
Утеплитель/подкладка
Office
The type of camouflage
Type of gloves
Защитные свойства
Type of thermal underwear
System
Type of clothing
Sex
Стандарт
Type of equipment
Класс защиты от кислот
Цена
640 р.
1 290 р.
1 290 р.
1 250 р.
Lightweight and durable tactical paupertate Reinforcement in the palm for additional protection Due to the high density inserts in foam, effectively protect the bones of the first phalanx and the back of your hand Strap with Velcro-fastener for fixation of the wrist Material: Genuine leather Tactical - this thing is absolutely necessary for people dealing with a cold or small arms. They protect hands from pinching mechanisms of small arms, cuts and bruises. Tactical knives are often designed for tactical gloves. Through open fingers, hands do not lose sensitivity and can perform the most delicate manipulations. Following the military tactical loved by tourists and athletes extreme. Drivers of SUVs, motorcycles, quads and bicycles, tourists, regulars adventure races, and orienteering got in their face easy and reliable protection for the hands, allowing you to leave the side of caution and focus on the route. Paupertate "Storm" made from genuine leather. On the palm of soft insert to protect the hands and the best cushioning. The back of the hand and knuckles of the first phalanges reliably protect high-density polyurethane insert.
Specifications: Specifications: Material (Fabric) Fleece Insulation Thinsulate Weight (kg) 0,11 Product information: Two-layer waterproof Elastic band on the wrist, reinforcement on palm and thumb
Specifications: Specifications: Material (Fabric) Fleece Weight (kg) 0,05 Product information: Women's single layer fleece gloves, elastic band on the wrist, reinforcement on palm and thumbs
Warm and durable mittens that meets all the needs of active guests in the winter Mittens are made with insulation - Thinsulate, great heat retaining and creating a feeling of comfort Top mittens with water-repellent impregnation for protection from wind and rain, supplemented by a ventilation system Waterproofness is ensured by the protective package located between the upper and lower layers of gloves The palm is reinforced with leather for increased durability The outer part of the thumb has insert faux suede for cleaning glasses High cuff For added convenience is provided with a lock connecting them in a couple REVIEWS: The review on the website "Russel" "Motion" was opened up once our collection of mittens for winter kinds of sports. Several years of testing skiers, snowboarders, paragliders and other thrill-seekers in a variety of conditions did not reveal significant shortcomings in their design. Warm, light, waterproof mittens do not moisten the inside through the ventilation system. Reliable sling if necessary, firmly tighten the wrist, closing the access to the snow and wind. Thick skin on the palms and lateral surfaces of mittens significantly prolongs their life and increases the grip with the sticks. Warm the inner surface gently warms the hands. Try them, and you will not want to wait for the holidays. The mountains are calling!
Specifications: Specifications: Material (Fabric) pile outer fabric with GORE-TEX Insulation Thinsulate Lining Odor-X™ antimicrobial inner coating Weight (kg) 0,34 Composition 100% polyester Product information: Multifunctional knit polyester mittens gloves 3 in 1 with index finger, fleece inner glove. Materials: pile outer fabric with GORE-TEX®, insulation Thinsulate™ 80 grams, lining Odor-X™ anti-microbial lining (antibacterial coating), silicone stripe Hot Shot® (with the deer) in the palm of the hand,woven strap with hook and loop fasteners (for fixation) that extend the flaps with fixation magnets. Inner glove with a palm made of elastic imitation leather and WINDSTOPPER®. Licensed camouflage colouring.
Specifications: Specifications: Material (Fabric) Fleece Weight (kg) 0,09 Product information: Warm double-layer fleece gloves, elastic at wrist and additional fastening with strap, reinforcement on palm and thumb
Specifications: Specifications: Material (Fabric) pile fabric with WINDSTOPPER Insulation Thinsulate Weight (kg) 0,32 Composition 100% polyester Product information: American brand Hot Shot Hunting Warm multi-function 3 in 1. Insulated inner glove and outer mitten. Can be used separately and together. Materials: pile outer fabric with a WINDSTOPPER® insulation Thinsulate™ 80 grams silicone stripe Hot Shot ® (with the deer) in the palm of the hand, a pocket with zipper (for heating) on the side, the latches on the magnets, cuff neoprene. Inner glove with a palm made of elastic imitation leather (model 333). Licensed camouflage colouring.
Specifications: Specifications: Material (Fabric) pile fabric Lining fleece with WINDSTOPPER® Weight (kg) 0,12 Product information: Glove for hunters Materials: pile the outer fabric and lining made of fleece with WINDSTOPPER®, strengthening the palm and thumb in natural leather, additional grid of silicone on the finger tips, neoprene cuff. Licensed camouflage colouring. Composition: 100% polyester.
Specifications: Specifications: Material (Fabric) Fleece Insulation Thinsulate Weight (kg) 0,1 Female Product information: Women's two-layer waterproof Elastic band on the wrist, reinforcement on palm and thumb
Specifications: Specifications: Material (Fabric) Spandex Lining Odor-X™ antimicrobial inner coating Weight (kg) 0,16 Product information: Elastic gloves that are optimally adapted to the hand. Materials: fabric with Spandex and GORE-TEX ® lining Odor-X™ anti-microbial lining (antibacterial coating), the gain between the fingers and reinforced palm, neoprene cuff. Licensed camouflage colouring. Composition: 100% polyester.
Specifications: Specifications: Material (Fabric) Fleece Weight (kg) 0,09 Product information: Reinforced palm and fingertips
Specifications: Specifications: Material (Fabric) wool Weight (kg) 0,13 Composition 85% wool, 15% polyester Product information: Knitted gloves. Materials: wool EcoRaggs®, tricot lining, insulation Thinsulate™ 40 g
Specifications: Specifications: Material (Fabric) Fleece Weight (kg) 0,14 Product information: Gloves-mittens fleece The amplifier in the palm of the hand for perfect grip. Fleece cuffs
Multifunctional gloves for fishing, sport and extreme rainy weather Dense neoprene Anti-slip coating on the palm Drop-tight neoprene cuff is tightened Patou Velcro Slits for thumb and index finger Material: 100% Neoprene, thickness - 2.5 mm It is well known that the cold and dampness provoke different diseases of the joints and the acute phase. Now, with the advent of the neoprene gloves, the danger of chill the hands in cold water is significantly reduced. Neoprene is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body. This property neoprene became rescue for tourists, paddlers, divers, spearfishing and other water and sailing sports. Gloves "Float" thanks to its classic shape and thickness of the neoprene, in addition to traditional use, perfect for driving quads and other motorcycles, fishing, Hiking and tactical actions in extreme weather conditions. From whatever bogs you don't have to get chilly in the fall of their iron horses, the hands will not freeze, and be protected against mechanical impacts. Reduced tactile sensations, which occurs by increasing the thickness of the material, is compensated by the ability to release the upper phalanx of the thumb and index finger. It is very useful to fishermen who have to perform delicate manipulations with hooks. Drop the cuff is tightly tightened by a strap with Velcro, allowing a perfect fit and denying access to water. Very warm, thick gloves, not only warm, but also protect the hands, and due to the coating on the palms they do not slip on the smooth surface.
Specifications: Specifications: Material (Fabric) fabric with Spandex Insulation Thinsulate Finish Odor-X™ antimicrobial inner coating Weight (kg) 0,1 Product information: American brand Hot Shot Hunting Elastic for shooting. Materials: fabric Spandex , insulation Thinsulate™ 40g. lining Odor-X™ anti-microbial lining (antibacterial coating). Reinforced palm and fingers. License camouflage
Tactical Attack provide protection circular brush against mechanical damage Correctly placed dense insert made of polyurethane foam effectively protects your thumb and the back of your hand Gain on the palm from a genuine leather are designed to improve grip and prevent slippage Neoprene cuff with strap-buckle type "Velcro" fixes the glove securely on the wrist without letting it slide Wear it in good health to you and your new adventure! Material: Genuine leather Neoprene
Specifications: Specifications: Material (Fabric) STORMPROOF Laminated fleece Weight (kg) 0,09 Composition 100% polyester Product information: American brand Hot Shot Hunting Hunting with protection from the wind. Material: STORMPROOF laminated fleece, Odor-X™ anti-microbial lining (antibacterial internal coating), embossed rubber inserts at the fingertips, exxtra suede palm, fleece cuff.
Specifications: Specifications: Material (Fabric) Fleece Weight (kg) 0,14 Product information: Gloves for hunting Amplifier for a perfect grip in the palm of the hand, between the fingers, at thumb and index fingers. Elastic cuffs with Velcro, a hook and loop
The classic model. Double knitting The most widely used and convenient in everyday life is warm, unpretentious, budget option gloves. In comparison with pure wool gloves have greater strength, abrasion resistance and shrinkage without losing breathability. Soft and stretchy wool blend double knit is very warm. In stormy weather they are ideal as a liner under the windscreen.
Very warm, light and soft woolen mittens Tight binding Made of natural wool and soft acrylic Have you ever wondered how these giant animals, like camels, survive and feel quite comfortable in the conditions of life are practically useless? If Yes, then you know about the complex oxidative and heat transfer processes occurring in its humps, which play a role, storage, inventory, and temperature controller. But all the gifts of nature would be vain, if not magical "ships of the desert" with its amazing properties. The structure of the fibers camel wool, that is, the presence of the cavity inside the fiber, making it light and warm, and a large number of animal wax – lanolin, provides a great density of wool and its strength. Due to the length of the fibers, almost no fall. But to completely eliminate slipping and reduce shrinkage, add wool to synthetic fibers – in this case acrylic. Besides other advantages of blended fabrics, yarn becomes cheaper. Warm, breathable made of wool improve blood circulation and preventing diseases of the joints. Camel does not irritate the skin or cause allergies. Good gloves for hunting or fishing, in Hiking and in the city. The only drawback woolen gloves, compared to synthetic is that they are harder to dry if they get wet.
Material: 100% polyester Palm: faux leather is resistant to abrasion Warm and durable mitten for winter activities The palm and the top part of the mittens is reinforced artificial leather to enhance its durability. The outer part of his left thumb mittens has an insert for cleaning glasses. Wrist mittens podrezenko and is dragged by the sling, protecting against the ingress of snow. High cuff is tightened the rubber cord to protect against snow and wind, and to regulate and release torque by one hand in a glove. Waterproofness is ensured by the protective package located between the outer layer and insulation. Ventilation slit on the entire width of the mittens with knitted mesh closes with a zipper. For added convenience, the glove is provided with a lock connecting them in pair. No friends on powder days! Powder Day is the day after the big snowfall. Even one day can make your trip unforgettable. Powder Day in the queue for the lift is built long before it was discovered – thirsty "to describe" virgin skiers and snowboarders, helplessly smiling at each other, quietly pushed back the neighbor's shoulder... With what can we compare the feeling of a descent on untouched virgin soil? Except that flying in a dream... You float flying in the snow, and happiness free sliding is magnified, Bouncing off the updated morning mountain slopes, fir trees sparkling in the middle of the frozen waterfalls. Really have to "dive". In addition to avalanche safety gear, don't forget to bring along the correct mittens. This model is designed for experienced snowboarders specifically for winter sports. Warm, light, waterproof mittens't moisten from the inside, thanks to ventilation slits with zippers, which control the width of the ventilation openings. The coarse grid creates a kind of pocket, where if you want you can put your ski pass, but the main purpose of this structural element still ventilation. The waterproof membrane ensures a solid protective package located between the outer layer and insulation. The top layer mittens are made of durable, breathable windproof and waterproof membrane fabric reinforced artificial leather. The skin and closes the upper phalanges of the fingers from the outside. The inner surface of the mittens – soft, comfortable fleece. Insulation - warm Thinsulate - does not absorb moisture and dries quickly after getting wet, fully restoring its original volume. As all (or almost all) mittens or extreme sports series, mitten protected from ingress of snow with a cuff. Reliable sling if necessary, firmly tighten the wrist, above the cuff tightened with a rubber cord with lock. To regulate and release torque by one hand in a glove. So mittens is not "ran" you can concatenate them together with a lock. There is a rubber loop, which can be easily fixed to the sleeve, allowing not to lose the mittens, if you suddenly needed to take them off. Enjoy riding, Your hands won't freeze!
Designed and manufactured to solve the most complex problems The palm and fingertips reinforced with durable synthetic leather Elastic cuffs with snap closure thermoplastic Top material Spandex for a perfect fit Sizes - S-XXL The manufacturer's website
Warm and practical from Polartec® Power Stretch® Pro. Design features allow to implement in mittens subtle manipulation. Features special cut a long enough cuff the fabric perfectly wicks away excess moisture, has breathable properties and is not expected, gentle breeze the strengthening of the working surface   Top fabric: Polartec® Power Stretch® Pro Material gain: artificial suede  
Extra long feather mittens for difficult weather conditions Design features allow to implement in mittens subtle manipulation. Features a special Department under the index finger from Polartec® 200 adjustable fixation of the wrist fixation of the cuff carabiner for attaching to clothing tether for insurance a flap valve   Features Top fabric: Polyester Hipol Inner fabric: Nylon Insulation: FP goose down 650 Adjustable cord with lock. Fixation of the wrist. Carbine for fastening to clothing. A flap valve.  
Warm and durable mitten for winter activities Side zipper, allowing you to release the hand into the inner glove The palm is reinforced with leather for increased durability The outer part of the thumb has insert for cleaning glasses Wrist mittens podrezenko and is dragged by the sling, protecting against the ingress of snow High cuff is tightened the rubber cord to protect against snow and wind, and to regulate and release torque by one hand in a glove For added convenience is provided with a lock connecting them in a couple Two-layer design: external moisture-windproof mittens, Thinsulate insulated inner fleece glove Material: polyester genuine leather Sun, easy reallywas in frosted needles of the trees lurking above and inviting cirques of the peaks, makes them Shine and sparkle all the colors of the rainbow. Sweet, frosty air, snow dust, blow desperate riders, mulled wine in glasses thick glass – my hands get cold, especially on the lifts... Model "Action", designed for winter sports, consists of two components: - mitten exterior made of durable, breathable windproof and water repellent polyester fabric, reinforced natural leather and insulated with Thinsulate th - inner fleece gloves, warms However, this similarity ends and mittens "Action" with lots of other sporting models. The highlight of the "Action" in what to perform delicate operations or in warm weather you can unzip the top and side of the mittens to release the hand in fleece glove. The output is protected zipper windproof leather strap. Buckling or to twisting of fastening of a snowboard, to snapping pictures, to dig into the motor of the snowmobile you can not fear to lose the external mitten, besides the presence of a zipper solves the problem of ventilation.
Gloves for outdoor activities in the warmer months Soft elastic material provides maximum freedom of movement The palm and fingertips of fiber Microfiber (Polyester 100%) Elastic cuff with Velcro fastener secures the glove at wrist Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100% Wrist: Elastic belts (Polyester 100%)/velcro Lightweight and durable will help to forget about the thorny bushes of the mountain slopes, the blisters from the trekking poles or a Bicycle wheel, will add reliability to your hands to rock insurance and confidence with the passage of the route. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. Backside of glove made of durable, quick-drying nylon.
Warm gloves Polartec® Windblock®. Features work surface is reinforced with leather carbine for fastening to clothing tie the wrist with elastic   Features Top fabric: Polartec® Windblock® Fixation of the wrist Carbine for fastening to clothing The strengthening of the working surface Material gain: genuine leather  
Material: //forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® High Loft™ - Extreme Warmth w/Stretch - "shaggy", with a long NAP Material density of 270 g/m2 //forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Weight: 290 g
Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100%/Neoprene/Polar fleece (Polyester 100%) Wrist: Elastic belts (Polyester 100%)/velcro
Versatile for Hiking and outdoor activities Soft elastic material provides maximum freedom of movement Palm fiber Microfiber (Polyester 100%) Protective pads made of neoprene on back of hand and knuckles The synthetic leather overlay on the toe in the places most prone to abrasion Neoprene cuff with Velcro fastener secures the glove at wrist Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100%/Neoprene Wrist: Neoprene/velcro Gloves designed for the challenging climb, driving the skittish transport and sports tourism. Their multi-component design aim to protect your hands in the most difficult conditions. Enterosorbiruyuschee hardening coating, durable breathable materials and a tight fit on the hand. Your hands will not lose its mobility, the ability to feel the relief and control equipment. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. Backside of glove made of durable, quick-drying Nylon with protective neoprene inserts. Neoprene is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body.
Universal tourism of synthetic material Soft elastic material provides maximum freedom of movement Palm fiber Microfiber (Polyester 100%) Protective insert neoprene on back of hand Neoprene cuff with Velcro fastener secures the glove at wrist Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100%/Neoprene Wrist: Neoprene/velcro Gloves designed for the challenging climb, driving a "vicious" transport and sports tourism. Their multi-component design aim to protect your hands in the most difficult conditions. Enterosorbiruyuschee hardening coating, durable breathable materials and a tight fit on the hand. Your hands will not lose its mobility, the ability to feel the relief and control equipment. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. Backside of glove made of durable, quick-drying Nylon with protective neoprene insert.
Dense, durable sports gloves The palm is perforated to create ventilation The palm and thumb with lining of artificial leather that increases the wear resistance The narrow neoprene cuff with Velcro fastener Insert lycra between fingers Insert neoprene on back of hand Incisions in the area of the middle phalanx of the fingers for increased flexibility and greater ventilation Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100%/Neoprene Wrist: Elastic belts (Polyester 100%)/velcro Fingers: (Nylon 100%) Gloves designed for challenging climbing and sports tourism. Their multi-component design aims to protect the hands in the most difficult conditions. Sophisticated ventilation, reinforcing, antiperistalsis coating, durable breathable materials and a tight fit on the hand. Your hands will not lose its mobility, the ability to feel the relief and control equipment. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. Backside of glove made of durable, quick-drying Nylon with protective neoprene insert. The lycra insert in fingers gloves allow for comfortable "sit down" on any hand.
Winter gloves mittens The fingers are closed by the valve, transforming gloves into mittens. Design features allow to implement in mittens subtle manipulation. An excellent choice for fishermen. Features protective flip valve using a Velcro fixed to the back side of the gloves carabiner for attaching to clothing tie the wrist with elastic   Features Top fabric: Polartec® 300 Fixation of the wrist Carbine for fastening to clothing The strengthening of the working surface Material gain: PU A flap valve  
Gloves from Polartec® 200. Features special cut carabiner for attaching to clothing tie the wrist with elastic fixation of the wrist   Top fabric: Polartec® 200  
Light, comfortable, durable to practice water sports, fishing and travelling in the rain Palm fiber Microfiber (Polyester 100%) Back of the hand neoprene Neoprene cuff podobrana on gum Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100%/ Neoprene Dense, warm with a good grip allow no voltage to hold the paddle, fishing rod or Bicycle handlebar. Gloves are not only warm, but also protect the hands from mechanical damage. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. Neoprene back of the hand will warm even under freezing rain. Recall that is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body. Warm hands is always the key to success and good mood.
Warm and durable mitten for winter activities Mittens are made with insulation - Thinsulate, great heat retaining and creating a feeling of comfort Outer fabric of glove material – modern polyamide Taslan fabric with water repellent polyurethane coating on the inner side Palm reinforced with abrasion-resistant faux suede Patrizianna wrist with adjustable strap High cuff is dragged by a cord with locking mechanism Security line Material: polyester faux leather Warm, cozy mittens make it easy to hold a ski pole or fishing rod, learn to handle a snowmobile, walking, feeling comfortable in any weather. To all this they are bound to the fabric from which made, ergonomic cut and specific for a sports mittens design. Outer fabric of glove material – modern polyamide Taslan fabric with water repellent polyurethane coating on the inner side. Taslan is lightweight, windproof and resistant to abrasion, repeated bending and to ultraviolet light material, a long time preserving the original appearance. The palm of the mitten is reinforced with abrasion-resistant faux suede. The Thinsulate insulation - don't absorb moisture and dries quickly after getting wet, fully restoring its original volume. Patrizianna wrist band with adjustable webbing protects against ingress of snow inside. When this line is tightened and released with one movement. Reliable obstacle snow, wind and become high gaiters, utgivelsen rubber cord with lock. Security line eliminates the need each time to remove the mittens in a pocket or backpack, if they took a while to remove. Wear it in good health to you and your new adventure!
Warm, versatile winter mittens-mittens on synthetic Thinsulate insulation with wear-resistant membrane. Convenient webbing for mounting on the wrist. Top fabric: Advance ® Alaska Inner fabric: Resist-DT® Insulation: Thinsulate®  
Warm, lightweight and durable tactical gloves Soft "pads" on the palm reinforced durable, anti-slip material Protection on back of hand made of soft plastic Lining from not sliding material on thumb and index fingers Soft knit cuff and narrow elastic cuff with Velcro fastener Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100%/Plastics/Polar fleece (Polyester 100%) Wrist: cuff knit (Polyester 100%)/velcro Tactical - this thing is absolutely necessary for people dealing with a cold or small arms. They protect hands from pinching mechanisms of small arms, cuts and bruises. Tactical knives are often designed for tactical gloves. Following the military tactical loved by tourists and athletes extreme. Drivers of SUVs, motorcycles, quads and bicycles, tourists, regulars adventure races, and orienteering got in their face easy and reliable protection for the hands, allowing you to leave the side of caution and focus on the route. Gloves "Blast" made of durable synthetic materials. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. On the palm of soft insert to protect the hands and the best cushioning, reinforced wear-resistant anti-slip material. Anti-slip pads on the thumb and index fingers. Top of gloves are made of durable Nylon fleece lining. Protection of flexible plastic protects the back of your hand and fingers. Warm knitted soft cuff warms the wrist.
Light sport from polyester, designed for the off-season, mild winters or active movement Work with capacitive screens The palm is made of a fabric of increased strength A good grip makes it convenient for cyclists, rock climbers and cross-country skiers Knitted cuff tucked under the sleeve The zest glove is a special pads on the thumb and index fingers that allow the gloves to work with touch screen phones, tablets and GPS navigators Material: Back side: 96% polyester/4% elastane Palm: 50% nylon/50% polyurethane
Warm mitten for sport and recreation. The insulation is Primaloft® One. Features contact areas are reinforced PU and silicone, have better traction with rope and equipment wind-resistant outer fabric practical tightening on the wrist loop for attaching to clothing reflective piping special surface on thumb and index finger for wiping your nose   Top fabric: Polyester Inner fabric: warm knitwear Insulation: Primaloft® One  
Warm gloves mitten with magnetic latch Warm mittens, which hides a comfortable paupertate Anti-slip coating on the palm Magnetic locking mechanism for the folded top mittens Patrizianna wrist Loop, through which can be easily removed Material: Back side: 96% polyester/4% elastane Palm: 50% nylon/50% polyurethane Warm, breathable gloves-gloves will be a godsend for the military, hunters, hikers and athletes. Much warmer than regular gloves, mittens slight movement turned into paupertate, freeing your fingers for the trigger or any fine manipulation. Pulled the mitten top is held with a magnetic closure and does not interfere with the work. Anti-slip coating on the palm will help you to confidently steer the snowmobile or ski poles.
Lightweight comfortable to practice water sports, fishing and travelling in the rain Insertion of neoprene on the back of the hand The palm is made of synthetic material windproof Windbreaker cloth Not slip pads non-slip on the palm Zipper on back of hand The sides of fingers with lycra Material: Palm: Windbreaker cloth (Polyester 100%)/non-slip - non-slip pads The back of the hand: Neoprene Fingers: (Nylon 100%) Dense, warm with a good grip allow no voltage to hold the paddle, fishing rod or Bicycle handlebar. No slip coating on the palms allows a good grip of all these, and many other useful things and objects. Jets foamy rapids of the rivers will turn to you his soft side, heavy rains can't spoil the mood of Cycling and tourist path. Gloves are not only warm, but also protect the hands from mechanical damage. Widely drop-down input in the glove is dragged the zipper located on the rear (neoprene) of the hand. Buttoned glove fit like a glove. The lycra inserts increase the flexibility of the fingers and provide a comfortable fit on the hand of any shape. Recall that is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body. Warm hands is always the key to success and good mood.
Windproof, waterproof mittens for winter outdoor activities Mittens made from taped seams on membrane fabrics Waterproofness is ensured by the protective package located between the upper and lower layers of gloves The palm is reinforced with artificial leather to enhance its durability High cuff is tightened the rubber cord with clamp Tightening at the wrist Safety loop For added convenience is provided with a lock connecting them in a couple Material: polyester faux leather Mittens "Cover" is the external wind deflector that can be used both independently and in combination with a warm inner gloves. Sealed seams keep wind, snow and water toteva from the inside while driving. Reinforced insert made of faux leather prolongs the life of the gloves, protects hands and absolutely non-slip. Having a reliable protection from wind, inner mittens you can choose depending on the situation. While driving a good fleece or palarikova gloves, as supplied with the membrane, inside they create the most comfortable microclimate. In warm weather, with strong winds and (or) precipitation you can go to some outer mittens. On camps during the cold nights, good feather inserts, mittens with modern synthetic fillers or woolen mittens. As all (or almost all) mittens or extreme sports series "Cover" securely protected from ingress of snow bongs on the wrist and the rubber cord with lock on cuff high. Sling on the wrist is tightened and released with one movement. Safety hinge allows you to remove mittens, for delicate operations, without fear of losing them. Fastening the padlock does not allow them to scatter at the corners of the Cabinet or backpack. In winter hikes or while climbing, dry, and warm mittens for the sinus sometimes can significantly affect the development of the situation. But even in less extreme types of sports gloves not to be taken lightly, it is hardly for them to save.
Gloves Polartec® 200. Features special cut contact areas are reinforced a lobster clasp for attaching to clothing tie the wrist with elastic   Features Top fabric: Polartec® 200 Fixation of the wrist Carbine for fastening to clothing The strengthening of the working surface Material gain: PU  
Warm mittens on synthetic Thinsulate insulation. The band for fastening on the wrist Top fabric: Advance® Perfomance Inner fabric: Nylon Insulation: Thinsulate®  
Mittens made of a membrane fabric with down insulation. Features the special design prevents the migration of down abrasion-resistant fabric top carabiner for attaching to clothing strap with buckle to adjust the tightening at the wrists leash for extra insurance cord retainer to prevent the ingress of snow inside   Features Top fabric: Nylon+Ulrex Inner fabric: Nylon Insulation: goose down Adjustable cord with lock Fixation of the wrist Carbine for fastening to clothing The strengthening of the working surface Material gain: Nylon  
Warm glove with Primaloft® insulation One. Features the wrist has extra protection contact areas are reinforced with polyurethane and silicone coating carabiner for attaching to clothing harnessed reflective piping   Features Top fabric: Polyester Inner fabric: warm knitwear Insulation: Primaloft® One  
Functional, insulated gloves. Features gain side surfaces of the fingers of Kevlar the strengthening of the working surface the cuffs and the back surface of Neoprene elastic band for fixing on the wrist, harnessed   Features Top fabric: Neoprene, Cordura®, Polyamide Inner fabric: soft Jersey Insulation: Primaloft®  
Non-insulated for sports and walks in the offseason The palm and the inner part of the thumb made of artificial leather, which increases durability and improves grip The lining of faux leather between thumb and forefinger High cuff is trimmed with elastic band The wrist is assembled to the elastic band Carbines, connecting in a couple The zest glove is a special pads on the thumb and index fingers that allow the gloves to work with touch screen phones, tablets and GPS navigators Material: 100% Polyester Iskusstvennaja skin REVIEWS: The review on the website "Russel" Forum discussion Gloves fully comply to its name. Thin and lightweight, they are designed for people who are serious about their Hobbies. Soft (smooth on the outside and soft on the inside) does not restrict movement, allowing you to make hands the most delicate manipulation, for example, tie knots, or switch the speed of the bike. The lining of faux leather reinforce the most vulnerable to abrasion of place and improve the bond of objects or surface. Patrizianna wrist ensure a secure fit on the arm, and wide cuffs comfortably tuck under clothing. You can use gloves with windproof mittens or gloves.
Lightweight and durable sports gloves Soft elastic material provides maximum freedom of movement The palm and fingertips of fiber Microfiber (Polyester 100%) Elastic cuff with Velcro fastener secures the glove at wrist Material: Palm: Microfiber (Polyester 100%) The back of the hand: Nylon 100% Wrist: Elastic belts (Polyester 100%)/velcro Fingers: (Nylon 100%) Lightweight and durable will help to forget about the thorny bushes of the mountain slopes, the blisters from the trekking poles or a Bicycle wheel, will add reliability to your hands to rock insurance and confidence with the passage of the route. The palm is made of high-tech fiber Microfiber (Polyester 100%). Since the filament of this material is much thinner than conventional fibers, the density of matter increases substantially. Thanks to this fabric made of Microfiber has a significant resistance to the wind and retains heat well. It is this that explains the water repellent properties of this material. This Microfiber does not prevent air exchange. Backside of glove made of durable, quick-drying nylon. Insert lycra in the sides of the fingers allow the glove tight and comfortable "sit down" on any hand.
//forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Material density - 240 g/m2 Weight: 180 g REVIEWS: About the material: pdf (2.1 MB)
Recommended for skiers and lovers of other winter sports and recreation Protective membrane packages anatomically shaped, water vapor permeability and provide protection from rain The palm is reinforced with artificial leather High cuff is tightened the rubber cord with a locking mechanism, whereby delayed and released in one motion The wrist is dragged wide webbing with Velcro fastener and a handy "skill", the end of the line is fixed with a rubber band Castle, linking in a couple Material: 100% polyester the pad on the palm: faux leather (Nubuk) Ski – not the piece of gear on which you want to save. This multi-component design which combines the contradictory properties. Good grip, convenient to hold in hand a stick combined with thick warm gloves. "Paropronitsaemost" coexists with wind –resistance. Gloves protect from snow, how deep into the snow we don't dig in the fall. They should be durable and protect the hands against mechanical impacts, such as hard firn or branches of trees. Although the main purpose of course – to warm. Gloves "Peril" are designed for skiers and snowboarders. They are perfectly suited to freeriders and have all relevant qualities. External durable, wear resistant fabric made of 100% polyester is separated from the insulation by glove vapor-permeable membrane, conductive evaporation body and removes the moisture from the outside. The membrane works well in wet conditions, at freezing temperatures. Lining on the palm made of artificial leather increase durability, reduce slippage and protect hands from damage. High-tech synthetic insulation has excellent thermoregulatory properties, do not dampen, doesn't lose insulation when wet properties, restores volume after compression and dries quickly, does not cause allergies. The lining of soft fabric on the index finger allows to wipe , or whisk them with drops of water.
//forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Material density - 240 g/m2 Weight: 180 g REVIEWS: About the material: pdf (2.1 MB)
Warm, versatile winter mittens-mittens on synthetic Thinsulate insulation with wear-resistant membrane. Convenient webbing for mounting on the wrist. Top fabric: Advance ® Alaska Inner fabric: Resist-DT® Insulation: Thinsulate®  
Gloves for outdoor activities in the warmer months Made of synthetic material with rubber inserts over the entire area of the palm for better grip The palm and the inner part of the thumb made of artificial leather, which increases durability The lining of faux leather between thumb and forefinger The narrow neoprene cuff with Velcro fastener Insert neoprene on back of hand Material: Polyester Iskusstvennaja skin Neoprene Paddle, rope, Bicycle handlebars or a tiller of the catamaran – these gloves have it all, or rather palm. Due to the complex cut, they sit like a glove. Synthetic leather on the palm makes it durable and wear-resistant, rubber pads non-slip grip even on wet surfaces, and the durable overlay between thumb and forefinger protects hands when working with rope. Polyester gloves top combined with a neoprene insert protects knuckles on back of hand and warm when working in the water or in the rain. Neoprene cuff with Velcro fastener tightly embraces the wrist. Neoprene is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body.
Windproof, warm gloves A great choice for active people who prefer a sporty style and improved comfort. Features cuff prevents the snow and wind blowing inside work surface is reinforced with leather carabiner for attaching to clothing harnessed   Features Top fabric: Polartec® Windbloc® SoftShell Inner fabric: Jersey Insulation: Primaloft® One The strengthening of the working surface Material gain: genuine leather  
Warm mittens on synthetic Thinsulate insulation. The band for fastening on the wrist Top fabric: Advance® Perfomance Inner fabric: Nylon Insulation: Thinsulate®  
Warm for outdoor activities in cool weather The palm is made of warm, dense Polar fleece Non-slip pads non-slip on the palm and the pads of three fingers of the leading Back of the hand of durable nylon Reinforcing pads made of artificial leather The lining of faux leather between thumb and forefinger Soft knit cuff and narrow elastic cuff with Velcro fastener Inserts made of Elastic belts between fingers Material: Palm: Polar fleece (Polyester 100%)/non-slip - non-slip pads The back of the hand: Nylon 100% Fingers: Elastic belts (Polyester 100%)/velcro Light, warm and tight combines the cozy warming softness of fleece with the durability and air flow through the nylon. Pads made of anti slip material allows easy insertion of a snowmobile, sticks or FAL towing kite. Insert of elastic material in the sidewalls of the fingers increase flexibility and improve the fit of the glove on the hand. Knit cuff gently warms tightened under a tight cuff of elastic material. Breathable, warm, durable materials that make up the design of the gloves dry quickly, but warm even when wet.
Warm, versatile winter mittens-mittens on synthetic Thinsulate insulation with wear-resistant membrane. Convenient webbing for mounting on the wrist. Top fabric: Advance ® Alaska Inner fabric: Resist-DT® Insulation: Thinsulate®  
Universal tourism of synthetic material Located on the wrist tightening elastic band secures the glove on the hand Increased durability in the palm of the hand and thumb Material: Polyester Iskusstvennaja skin Spandex Dense breathable for cool weather essential for your journey, insurance and at camp. The hand and fingers protected with dense artificial leather, which also reduces the slippage of the glove and increases their strength. Dense does not detain a moisture, warms even in wet condition and dries quickly. Spandex provides elasticity to the glove.
Universal insulated gloves c Porelle membrane. For riding and working in cold conditions. Features waterproof outer fabric with membrane the strengthening of the working surface from the skin protective silicone pads on the fingers practical tightening on the wrist harnessed   Features Top fabric: Polyester, leather Inner fabric: soft Jersey Insulation: Primaloft®  
Gloves to practice water sports Dense neoprene Anti-slip coating on the palm Outseams Material: 100% Neoprene, thickness - 2 mm REVIEWS: Review of Panda Survival Gloves Wave you can enjoy the speed, not fearing to let go of the sail or tow rope wakeboard, you can jump the waves on a scooter or go canyoning, you can fish, if you prefer a more peaceful pastime. In any case, high elasticity and anti-slip coating on the palm these neoprene gloves always helps, when you want full control over the situation. Neoprene is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body. Luck is in your hands, if your hands are warm!
Gloves to practice water sports Dense neoprene The Kevlar coating on the palm Drop-down cuff tightly tightened the sling with Velcro Material: 100% Neoprene, thickness - 3 mm Reinforcement on palm - Kevlar™ In cold water your hands quickly lose their sensitivity and mobility, especially if the work is not too active, such as fishing, canyoning, while water skiing, wakeboarding or catamaran sailing trips. But during prolonged rowing arms have not sweet. Neoprene gloves "Walrus" is able to protect them from hypothermia. High elasticity neoprene gloves in combination with their anatomical shape always helps, when you want full control over the situation. A convenient "grip" gloves makes them initially "sharpened" under the paddle, the boom of the surf or the wheel of the scooter, which significantly reduces the tension hand. Neoprene is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body. From abrasions and cuts protects hands tight, not moving a Kevlar coating on the palm. The Kevlar not only protects hands, but also significantly extends the life of gloves by themselves, making them durable and resistant to mechanical stress. Kevlar™ para – aramid (polyparaphenylene-terephthalamide) fiber, manufactured by DuPont, which has high strength (five times stronger than steel, the tensile strength σ0= 3620 MPa) at equal weight, a cut resistance up to five times higher compared to skin. Durable, tough, stable in size fiber has high temperature resistance and chemical stability. High cuff gloves tightly tightened the sling in the pocket, blocking access to water. Luck is in your hands, if your hands are warm!
– cotton gloves to protect your hands from abrasion, cuts and punctures in the course of performing plumbing or loading operations Materials: main: dvunitka, PL.260 g/m2 the handheld: tarpaulin, PL.450g/m2 odnaleziony: dvunitka Dimensions: 2 GOST 12.4.010-75
– for protection of hands against mechanical impacts and abrasion, sparks and molten metal splash – used when performing a locksmith's and welding works – have high strength and excellent performance Material: split leather The thickness of the split leather: 0.9-1.1 mm Dimensions: 10 GOST 12.4.010-75
Gloves designed to protect hands from mechanical impacts, abrasion, provides high comfort, recommended for long-term wear. Material: Brushed split leather, soft, thick 1.3 mm (+/- 0.1), with grade "a" insulation Thinsulate (Thinsulate 40g/m2) Size: 10,5 GOST 12.4.010-75
– with leggings – for protection against mechanical damage Material: split leather with inserts of cotton fabric Insulation – faux fur The thickness of the split leather: 0,9-1,2 mm Dimensions: 10 GOST 12.4.010-75
Gloves mix fiber yarn, coated with high strength polyurethane. Applications:  -    Working with sheet metal and glass -    Automotive, engineering -    Metallurgy -    Paper industry -    The production of ceramics  -  The removal and disposal of waste Material: fiber blend yarn, polyurethane Working surface: smooth Cuffs: knit, closed Color: black Length: 210 mm The level of protection from cuts: 5 Size/color rims on the wrist: 6/white, 7/green, 8/brown, 9/yellow, 10/grey EN 388 4544
Scope: •    Chemical industry •    Technical wash •    Cleaning deep tanks •    Maintenance of buildings and structures Features: •    100% natural rubber for superior protection against chemicals water based and mechanical damage. •    Undulating working surface improves grip and prevents slipping •    Ruffled cuff that can be folded to trap the droplets that prevents wet sleeves •    Elongated cuffs for added protection •    Certified on demand TR CU 019/2011 The coating material is fully covered with natural rubber Lining material – spraying Work surface – wavy Cuff – corrugated Thickness, mm – 0,55 +to -0.05 Length - 420 mm, +-10 Color – dark orange, pink Size – M, L, XL Manufacturer: SUMMITECH Professional
– for corrosive environment and chemical, petroleum and paint industries – resistant to acidic and alkaline solutions (allowable concentration of acids 50%, alkali – 20%) Material: bike with fleece and coated with PVC Dimensions: 2 GOST 12.4.010-75
Fabric: diagonal dyedDimensions: secondGOST 12.4.010-75 In the package: 100 pairs
Material: //forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® High Loft™ - Extreme Warmth w/Stretch - "shaggy", with a long NAP Material density of 270 g/m2 //forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Weight: 290 g
To protect the hands against cold. Material: wool, Thinsulate insulation Size: L, XL GOST CN. АГ75. ВО0491
– to protect the hands from thermal burns, sparks and splashes of molten metal, abrasion,cuts, punctures and other damage during operation in industrial premises and outdoors – durable and reliable to use Material: leather split leather The thickness of the split leather: 0,9–1.2 mm Dimensions: 2 GOST 12.4.010-75
– for operation in low temperatures down to -40°With and in areas with low temperature – cotton base with fleece retains heat well – PVC coating gloves gives KHS and MBS properties – high mechanical strength Dimensions: 10 GOST R 12.4.246-2008
Scope: •    Working with chemicals •    Work with oil and painting •    Automotive and supply •    Chemicals for agriculture •    Maid Features: •    Special coating of nitrile rubber ensures protection from a wide range of solvents and substances based on oil •    High resistance to abrasion •    Deposition and diamond-shaped pattern on the palms improves grip gloves •    Does not contain silicone •    Comply with Federal rules (Rule 21, USA) and European directives on working with food •    Certified on demand TR CU 019/2011 The coating material is fully coated in nitrile rubber Lining material – knitted spraying Work surface – diamond Cuff – direct Thickness, mm – 0,38 +to -0.05 Length – 330 mm +-10 Color – green Size – 7,8,9,10,11 Manufacturer: SUMMITECH Professional  
Gloves of light "breathing" material. Synthetic glove material is more environmentally friendly compared to natural leather which is chrome tanned. In addition to advertising functions logo, which is printed on the working surface of the gloves relief method, provides a reliable and comfortable grip. Bright color gloves serves as an additional signaling effect in poor light conditions. Gloves should be washed at 30C° Applications: Multi-purpose use. Work requires gloves with a maximum level of comfort, elasticity and strength    - Construction    - Commissioning    - Material handling Color: the combination of yellow with black Size/Length: S-220, M-230, L-240, XL 250, XXL-250 mm Cuffs: closed on the Velcro fastener EN 388
Color: black Fabric: cattle split leather The position comes under the order
Scope: •    Processing of meat and poultry •    Processing of fruits and vegetables •    Processing of fish •    Agrochemical industry •    Maid Features: •    Suitable for contact with all fatty foodstuffs. •    Ultra-lightweight structure improves the sensitivity, flexibility but retains strength. •    Unlined, reducing the risk of infection. •    Comply with the European directives on the treatment of food products and the Federal code of regulations 21 (USA) •    Certified on demand TR CU 019/2011 The coating material is Fully coated in nitrile rubber Lining material – without spraying Work surface – granular Cuff – direct Thickness, mm – 0,21 +to -0.05 Length – 300 mm, +-10 Color – white/blue/ green Size –  7, 8, 9, 10, 11 Manufacturer: SUMMITECH Professional
– to work with petroleum products – double-layered nitrile coating – soft cuffs – high mechanical strength and resistance to acid-base environments Dimensions: 9-11 GOST 12.4.010-75
– to protect your hands from water and non-toxic substances – natural latex – protect from loose coloring matter, salts,acids and alkalis average concentration (20 %) – inner cotton lining, which prevents irritation of the hands Dimensions: S, M, L, XL GOST 20010-93
Gloves to practice water sports Dense neoprene Anti-slip coating on the palm Outseams High drop-tight cuff sling is tightened by Velcro Material: 100% Neoprene, thickness - 3 mm Don't want to scare anyone, but unfortunately, arthritis is quite a common disease. She especially welcomes tourists, paddlers, divers, lovers of water sports and hunting with experience. However, with the advent of neoprene it is becoming less. "Surf" less tactile than gloves "Wave", but much warmer, so you can use them for scuba diving and spearfishing Neoprene is a type of synthetic rubber - chloroprene rubber. Rubber foam used for wetsuits wet-type, based on the principle of which is absolute isolation from water and that the water inside is heated to the temperature of the human body. Thick, warm gloves possess sufficient elasticity to ensure that no tension to hold the paddle, windsurf boom or the wheel of a sailing catamaran, not a slip coating on the palm provides a good grip. High drop-tight cuff is tightened the sling in the pocket, blocking access to water. Very warm, thick gloves, not only warm, but also protect the hands from mechanical damage.
– to work with solutions of detergents, fats, salts, alcohols and acid-alkali solutions with concentration up to 40% – natural latex high density Dimensions: 1, 2, 3 Manufacturer: Russia GOST 20010-93
– recommended for use in the winter – protect hands from low temperatures and mechanical damage Materials: main: the fabric "Diagonal", PL.240 g/m2 insulation: sheepskin Dimensions: 2 GOST 20176-84
– can be used as liming in protective gloves – 7-knitting class Dimensions: 22 GOST 5007-87
Scope: •    Chemical treatment •    Oil and gas industry •    Public works/ utilities •    Cleaning and handling oily parts Features: •    Insulated sleeve provides protection from liquids and dust •    Gloves have a protective layer of PVC and have excellent resistance to oils, greases, hydrocarbons and a wide range of chemicals •    Excellent resistance to abrasion and tear •    Engraved/texturearray surface improves grip for safe operation •    Seamless cotton lining •    Ergonomic shape ensures perfect placement on the hand •    Certified on demand TR CU 019/2011 The coating material is fully coated PVC, thermal insulated sleeves Lining material – cotton interlock Work surface – granular Cuff – elastic Thickness, mm – no data Length – 660 mm, +-10 Color – blue Size – M, L, XL
– partial PU coating – for fine and precision work – firmly against your hand Dimensions: S, M, L, XL GOST 28846-90  
-point polymer coating -kruglovatoe -7-knitting class Dimensions: 22 GOST 5007-87
Leather gloves to protect the hands of the mountaineers, for use indoors and outdoors. The high quality leather makes these gloves soft and durable, allowing you to ensure acumen, as well as the reliability insurance. Very comfortable and durable. enhanced zone more load between your thumb and index finger perforated inner side of the glove for improved air circulation loop on each glove for hanging on a carabiner 100% leather weight 70 g (size XS)  
Seamless gloves from a mixture of fibres yarn and polyester Applications:  -    Cutting meat, seafood -    Working with sheet metal and glass -   Automotive, engineering -    Metallurgy -    Paper industry -    The production of ceramics -    The removal and disposal of waste Cuffs: knit, closed Color: blue The level of protection from cuts: 5 Size/color rims on the wrist: 7/red, 8/yellow, 9 brown, 10/black 11/black EN 388   354  
To protect the hands against cold. The handhelds spiskovima reinforced overlays. Material: wool, Thinsulate insulation, split leather "A"class Size: L, XL GOST CN. АГ75. ВО0491
Designed to protect your hands against mechanical impact, sparks and splashes molten metal, elevated temperatures. Used for welding in various industries. TR CU 019/2011 Material:  cattle split leather   Length:  360 mm The thickness of the split leather: 1,0 – 1.2 mm Size: 10 Color: red Description: Seams seaming details made with a protective layer of split leather Lining cotton, in the palm C/b fleece
– comfortable gloves to perform precision work – provide precision of movement, good grip, comfort – cuffs closed tightly hugs the wrist Materials: nylon fabric Length: 220 mm Dimensions: S, M, L, XL Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
– gloves made of high-strength fabric Kevlar® – for sheet glass and metal, machine and automotive industries and other areas – cuff – closed Materials: the fabric is Kevlar®coated nitrile work surface Dimensions: S, M, L, XL Length: 220 mm Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
– for work in wet conditions in the chemical industry, sanitary and agricultural works – made from natural rubber have a cotton lining – work surface – zigzag Length: 300 mm Thickness: 0.40 mm Dimensions: 7–7,5; 8–8,5; 9–9,5;10–10,5 Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
 - for operation at low temperatures up to -40°With and in areas with low temperature; - cotton base with fleece retains heat well; - PVC coating gives gloves MBS and KHS properties; - high mechanical strength. GOST R 12.4.246-20081
– for welding works – protection against heat radiation, splashes of hot metal – highest quality leather and finish A+ – used when melting metal, working with hot objects, material handling, and construction – full pile inner coating – reinforced seams Materials: high quality calf split leather Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
Gloves made of polyurethane on a fabric basis. Inner layer — the two-layer basis with the use of acrylic fur Applications: - Mechanical work in the cold time, including when in contact with aggressive environments - Forestry and fisheries - Snow removal work - Work in warehouses Working surface: granulated Cuffs: legging Color: yellow Length: 280 mm Size: M, L, XL EN 388 4223 EN 511 121
Scope: •    Chemical treatment •    Work with acids, alkalis, salts, ketones •    Aeronautics •    Painting spray •    Cleaning and degreasing with Soaps and detergents Features: •    The structure of chloroprene and natural rubber increases the level of protection against a wide range of chemicals •    Provides a higher level of chemical protection compared to conventional protective gloves •    Gloves have the longest length, compared with other gloves for extra protection •    Soft coating absorbs sweat and is resistant to solvents •    The zigzag pattern on the working surface provides a better grip when working in wet or dry conditions •    Certified on demand TR CU 019/2011 The coating material is fully covered with natural rubber, the material on the palm is a mixture of natural rubber and chloroprene Lining material – spraying Work surface – zigzag Cuff – direct Thickness, mm – 0,60 +to -0.05 Length – 330 mm +-10 Color – blue hand and yellow cuff Size – 7, 7½, 8, 8½, 9-9½ and 10-10½ Manufacturer: SUMMITECH Professional
– wave-like polymer coating – The 7.5-knitting class Fabric: 5-string Weight: 65 g Dimensions: 22-24 TR CU 019/2011
– can be used as liming in protective gloves – 7-knitting class Dimensions: 22 GOST 5007-87
Recommended when working in extremely low temperatures in various industries: construction, petrochemicals, energy, transport, installation work, warehouse work, agriculture. PVC remains flexible at low temperatures resistant to oils and hydrocarbons.  Protective legging facilitates donning gloves.  Sand the surface provides a secure grip. Material: Material/insulation: acrylic fur Treatment:  PVC Working surface:  sandy Design:  legging Length: 310 mm Dimensions:  L, XL TR CU 019/2011
 
– polymer coating – The 7.5-knitting class Fabric: 5-string Weight: 65 g Dimensions: 22-24 TR CU 019/2011
Gloves of light "breathing" synthetic material with a polyurethane reinforcement the palm and fingers. Neoprene strip on the rear side of the brush for extra protection from bumps. Synthetic glove material is more environmentally friendly compared to the commonly used chrome skin. Bright color gloves serves as an additional signaling effect in poor light conditions. A high level of comfort, elasticity and strength. Gloves should be washed at 30C°. Applications: Multi-purpose use. Work requires gloves with a maximum level of comfort, elasticity and strength   - Construction   - Commissioning   - Material handling Color: the combination of orange with black Size/Length: S-220, M-230, L-240, XL 250, XXL-250 mm Cuffs: closed on the Velcro fastener EN 388
Features: •    Blended bamboo and cotton lining medium density for dry hands with antibacterial function. •    Ideal for extended wear •    The special structure of gloves made of soft nitrile rubber, provides excellent functional capability and comfort, retains sensitivity and durability •    Antibacterial treatment prevents the growth of bacteria and fungi. •    Comply with the European directives on the treatment of food products and the Federal code of regulations 21 (USA) •    Certified on demand TR CU 019/2011 The coating material is fully coated in nitrile rubber Lining material – blended bamboo and cotton lining Work surface – diamond Cuff – direct Thickness, mm – 0,36 +to -0.05 Length - 330 mm, +-10 Color – light blue Size – 7,8,9,10,11 Manufacturer: SUMMITECH Professional  
– antibacterial treatment – chemical resistance to inorganic solvents, acids and alkalis, gas condensate, alcohols, methanol, petroleum products Material:  cotton fabric Jersey fully covered nitrile rubber Manufacturer: SUMMITECH Professional Length: 250 mm Size: 8–11 GOST R 12.4.246-2008
Scope: •    Oil refining and gasoline •    Agricultural chemistry •    Chemical industry •    The production of batteries Features: •    Consist of gloves chloroprene medium weight coating to provide protection from acids, solvents, alcohols, alkaline solutions •    High flexibility even at low temperatures. •    The perfect combination of flexibility, strength, durability and excellent comfort. •    Does not contain silicone •    Certified on demand TR CU 019/2011 The coating material is completely covered with chloroprene Lining material – spraying Work surface – granular Cuff –direct Thickness, mm – 0,75 +to -0.05 Length – 330 mm +-10 Color – dark blue Size – 7,8,9,10,11 Manufacturer: SUMMITECH Professional
– for welding works – protection against heat radiation, splashes of hot metal – highest quality leather and finish A+ – used when melting metal, working with hot objects, loading and unloading and construction works – full pile inner coating – reinforced seams Materials: high quality calf split leather Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
- soft leather grade And - elastic band at wrist for a snug fit to the hand Color: yellow Material: cattle leather 1.2 mm thick (+/- 0.1 mm) Length: 260mm Size: 10,5 GOST 12.4.010-75; GOST R 12.4.246-2008
Scope: •    Chemical and petrochemical industry •    Purification of waste and sewage •    Production service •    Automotive •    Laboratory analysis •    Agro-industrial complex Features: •    Gloves consist of a mixture of chloroprene medium density natural rubber to provide protection from acids, alkalis, alcohols, salts and ketones •    Remains elastic even at low temperatures •    Grainy picture on the palms of the gloves provides reliable grip in dry and wet conditions •    Soft coated lining provides comfort gloves medium •    Does not contain silicone •    Certified on demand TR CU 019/2011 The coating material is a mixture of natural rubber and chloroprene Lining material – spraying Work surface – granular Cuff – direct Thickness, mm – 0,75 +to -0.05 Length - 330 mm, +-10 Color – dark blue Size – 7,8,9,10,11 Manufacturer: SUMMITECH Professional
High protection for handling heavy or sharp objects in aquatic environments- high cut protection- high thermal insulation of the hand- non-slip coating- high resistance to perforationApplications: glass industry, ceramic and plastic industry, production of compositesMaterial: knitted seamless basis on the basis of high-strength fiberExternal coating: latex on palm and fingersLength: 23-26 cmColor: blueDimensions: 7,8,9,10,11
– to protect your hands from abrasion and other mechanical damage during the works – for construction, repair, installation, and loading operations – for the best protection against abrasion provided for dual handheld Materials: cotton material Fabric: dvunitka Dimensions: 2 GOST 12.4.010-75
Designed to protect your hands against mechanical impact, sparks and splashes molten metal, elevated temperatures. Used for welding in various industries. TR CU 019/2011 Material:  cattle split leather Length:  350 mm The thickness of the split leather: not less than 0.9 - 1.0 mm Size: 10   Color: grey                
Scope: •    Enhanced cleaning •    Chemical processing and preparation for processing •    Maintenance of heavy equipment in the manufacturing •    General industry •    Work with food Features: •    High resistance to wide range of chemicals, such as ketones, alcohols and alkalis. •    100% natural rubber gives excellent protection from mechanical and chemical influences •    Dense but at the same time comfortable gloves with a soft coating •    Treated with chlorine for improved grip and increased chemical resistance •    The working surface on the palm and fingers, in zigzag form for superior grip •    Special treatment to reduce the risk of allergic reactions •    Meet the requirements of the Federal rules - rule 21 (USA) •    Meet the requirements of European directives – for all types of food except fatty foods •    Certified on demand TR CU 019/2011 The coating material is fully covered with natural rubber Lining material – knitted spraying Work surface – zigzag Cuff – direct Thickness, mm – 0,70 +to -0.05 Length - 330 mm, +-10 Color – dark orange Size - 7, 8, 9, 10 and 11 Manufacturer: SUMMITECH Professional
Seamless gloves from a mixture of fibres yarn and polyester Applications:      -    Working with sheet metal and glass -    Automotive, engineering -    Metallurgy -    Paper industry -    The production of ceramics -    The removal and disposal of waste Cuffs: knit, closed Color: grey Length: 225 mm The level of protection from cuts: 5 Size/color rims on the wrist: 7/red, 8/yellow, 9 brown, 10/black 11/black EN 388 354Х
– protective gloves of natural rubber with an additional protective layer – for works in chemical industry,agriculture and sanitary works – protects against low-concentrated solutions of acids and alkalis Length: 300 mm Thickness: 0.40 mm Dimensions: 7–7,5; 8–8,5; 9–9,5; 10–10,5 Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
Protection to perform any work on the moving light loads – great compromise: more durable compared to gloves for precision handling and more comfortable compared to gloves for heavy work – excellent resistance to wear – protection from moisture and splashes of oil and grease Applications: mechanical (handling oiled mechanical parts, precision mechanics), carpentry, grinding, packing, packaging, manufacture of electrical equipment Color: yellow Material: textile basis external coating: nitrile smooth coating protection wrist: knitted material Length: 260 mm Thickness: 0.80 mm (measured at palm) Dimensions: 7, 8, 9, 10 GOST R 12.4.246-2008
- for protection against mechanical influences and damage by glass or fittings - textured latex coating provides good adhesion to dry and damp surfaces Material: Jersey(blend of cotton and polyester), latex coating Dimensions: 9,10 GOST R 12.4.246-2008
– for precision work – special design of gloves ensures comfort, good grip, dexterity and precision in the execution of works Materials: nylon fabric coated with nitrile on the working surface Length: at least 220 mm Dimensions: S, M, L, XL Manufacturer:SUMMITECH Professional GOST R 12.4.246-2008
– to protect your hands from abrasion and mechanical damage – designed for welding work – fireproof impregnation Material: tarpaulin 11255 - 450g/m2                  11293 tarpaulin - 500g/m2                  tarpaulin 11292 - 550g/m2 Dimensions: 2 GOST 12.4.010-75
Scope: •    Chemical treatment •    Casting •    Metalworking •    Purification of petroleum products •    General maintenance •    Laboratory analysis Features: •    Top grade chloroprene for protection from serious chemical and mechanical impact while maintaining functionality under varying operating conditions •    Seamless soft absorbent lining adds comfort and flexibility. •    Sandy pattern on the working surface reduces risk of slipping •    Certified on demand TR CU 019/2011 The coating material is completely covered with chloroprene Lining material – seamless polchlopek Work surface – sandy Cuff – carved Thickness, mm – no data Length – 300/350 mm, +-10 Color – black palm/blue cuffs Size – 7,8,9,10,11    
– to protect your hands from damage – provide a secure grip – resistant to mechanical stress Material: leather split leather The thickness of the split leather: 1,2 of 1.4 mm Dimensions: 10 GOST 12.4.010-75
Seamless sleeves from fiber blend yarn, and polyester, long sleeves Applications:  -   Meat cutting -    Processing of poultry and seafood Cuffs: knit, closed Color: blue Length: 400 mm The level of protection from cuts: 5 Size/color rims on the wrist: 8/yellow, 9 brown, 10/black EN 388 354Х  
– wear-resistant and durable – 7-knitting class Dimensions: 22-24 Fabric: 4-strand TR CU 019/2011
The material of the cover: fully coated nitrile foam Working surface: grooved type tire tread Cuffs: knit, closed Color: black Length: 235-270 mm Size: 7,8,9,10,11 TR CU 019/2011
Seamless nylon gloves on the basis of, natural rubber. Ergonomic design. Tight-fitting cuffs. Applications:              - Chores   - Work in wet conditions   - General engineering work   - Maid Cuffs: carved Color: bright green Material: natural rubber on nylon base Length: 300 mm Size: 7, 8, 9, 10 ,11 EN 388 3141
Gloves combined. High resistance to abrasion and tear, limited protection from cuts and punctures. Material: dense mixed fabric of red color with celcom grade "A" yellow reinforced rigid gaiter, insulation - faux fur 600 g/m2. Soft split leather thickness 1.3 mm, double seams. Size: 10,5 GOST 12.4.010-75
– comfortable gloves to perform precision work – provide precision of movement, good grip, comfort – cuffs closed tightly hugs the wrist Materials: nylon fabric, polyurethane coated on the working surface Length: 220 mm Size: S, M, L, XL Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
Designed to protect your hands against mechanical impact, sparks and splashes molten metal, elevated temperatures.  Used for welding in various industries. TR CU 019/2011 Material:  cattle split leather Lining: cotton, in the palm cotton fleece Length:  360 mm The thickness of the split leather: not less than 1.1 - 1.3 mm Size: 10 Color leggings, yellow, red color lining        Description: Seams are sewn with Kevlar thread® On the big toe from the backside and from the side palm the extra pad from Spilka Seams seaming details made with a protective layer of split leather, the sewing on the seams pads made dougalli  
– convenient – for protection of hands against mechanical damage and abrasive loads Material: leather split leather The thickness of the split leather: 0,9-1,2 mm Dimensions: 10 GOST 12.4.010-75
– coating natural latex – 10 knitting class Dimensions: 22 TR CU 019/2011
The convenience and softness to work with food – maximum sensitivity – no silicone guaranteed – for protection from liquid media – complies to FDA (Management on sanitary inspection behind quality of foodstuff and medicines of the USA) for food contact Applications: food industry Color: blue Material: natural latex inner coating: smooth chlorinated external coating: non-slip surface Length: 310 mm (for all sizes) Thickness: 0.45 mm Dimensions: 6, 7, 8, 9, 10 GOST 20010-93
Tight gloves, oil-resistant, resistant to weak acids and alkalis. Designed to work with slippery surfaces for protection from abrasion, punctures and cuts. Material: Gloves PVC covered (in full) on HB basis, cuffs - elastic tight-fitting wrist, lining interlock. Color: red
Scope: •    Chemical treatment •    Oil and gas industry •    Public works/ utilities •    Cleaning and handling oily parts •    Work with food Features: •    Gloves have a protective layer of PVC and have excellent resistance to oils, greases, hydrocarbons and a wide range of chemicals •    Excellent resistance to abrasion and tear •    Engraved/textured working surface improves grip for safe operation •    Ergonomic shape ensures perfect placement on the hand •    Comply with the European directives on working with food and rule 21 of the Federal code of Regulations (USA) •    Certified on demand TR CU 019/2011 The coating material is fully coated PVC Lining material – seamless cotton Work surface – engraved Cuff – carved Thickness, mm – no data Length – 300/350 mm, +-10 Color – blue Size – M, L, XL Manufacturer: SUMMITECH Professional
– antibacterial treatment – completely drenched nitrile rubber – cotton fabric Jersey – stitched knitted cuff – chemical resistance to inorganic solvents,acids and alkalis, gas condensate, alcohols,methanol, petroleum products Length: 250 mm Dimensions: 8–11 Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008
Cotton fabric(Jersey) is partly covered with nitrile rubber. Applications:  -    Construction -    Carpentry works -    Commissioning work -    Production and processing of metal -    Grinding and fettling -    Spot welding -    Assembly and disassembly mechanisms Working surface: smooth Cuffs: knit, closed Color: dark blue Length: 250 mm Size: 8, 9, 10, 11 EN 388 3111
– wave-like polymer coating – The 7.5-knitting class Weight: 68 g Dimensions: 22–24 TR CU 019/2011
– to protect your hands from abrasion and mechanical damage – designed for welding work – fireproof impregnation Material: tarpaulin 11255 - 450g/m2                  11293 tarpaulin - 500g/m2                  tarpaulin 11292 - 550g/m2 Dimensions: 2 GOST 12.4.010-75
- comfort and strength for moving heavy loads - ease of manipulation: exceptional comfort thanks to a textile base - excellent resistance to oils and greases - extended life Material: textile basis with nitriloside coating, knitted cuff Length: 250-270 mm GOST R 12.4.246-2008
– for the fish processing industry, as well as all types of industries requiring contact with the product with wet and slippery surfaces – work surface – granulated Material: granulated PVC on a knitted base Length: 300 mm Dimensions: L THE 2514-039-00149274-99
Light glove-liners suitable for any kind of activity Anatomical slim fit and stretch fabric provide Supreme comfort Work with capacitive screens Material: 92% Polyester 8% Elastane
Standard defense to perform precision work in a slightly contaminated environment- resistant to wear- maximum comfort: anatomical shape- ergonomics, minimal hand fatigueApplications: engineering (maintenance, stacking panels, covered with oil, working on the press), paper industry (working with tools, cardboard, paper), collection and movement of wasteMaterial: knitted seamless basis based on fiber HDPEExternal coating: polyurethane on palm and fingersCuff: elastic hosieryLength: 20-26 cm (depending on size)Color: greySize: 6,7,8,9,10,11
– wave-like polymer coating Dimensions: 22-24 TR CU 019/2011
– polymer coating Dimensions: 22-24 TR CU 019/2011
– 5-string – The 7.5-knitting class Weight: 68 g Dimensions: 22–24 TR CU 019/2011
- 10 knitting class Length: 0.24 m Color: white Material: cotton, p/e Size: 24 TR CU 019/2011 *exclusive "avant-garde clothing"  
– combined gloves from furniture leather and cotton fabric – reliable hand protection against mechanical damage and abrasive loads Material: furniture leather and cotton fabric Dimensions: 10 GOST 12.4.010-75
- accuracy at a moderate chemical protection - comfort thanks to the inner coating - fineness of the glove provides maximum comfort during operation - work with slippery objects Material: neoprene/natural latex Length: 310 mm GOST R 12.4.246-2008
– the main means of protection from electrical current up to 1000 V Material: rubber Dimensions: 1–3 TU 38.305-05-257-89  
– kruglovatoe – double coating with natural latex – 10 knitting class Dimensions: 22 TR CU 019/2011
The material of the cover: partly covered with nitrile foam Working surface: grooved type tire tread Cuffs: knit, closed Color: black Length: 235-270 mm Size: 7,8,9,10,11 TR CU 019/2011
- additional coverage brushes and nitrile rubber crumb - carved cuffs - working surface granulated Material:  100% cotton covered natural rubber Manufacturer: SUMMITECH Professional Length: 300 mm Size: S,M,L,XL GOST R 12.4.246-2008
– spot polymer coating – The 7.5-knitting class Fabric: 4-strand Weight: 50 g Dimensions: 22-24 TR CU 019/2011
– spot polymer coating – The 7.5-knitting class Fabric: 4-strand Weight: 40 g Dimensions: 18-20 TR CU 019/2011
– wear-resistant and durable – 7-knitting class Dimensions: 22-24 Fabric: 5-string TR CU 019/2011
– universal gloves for protection against mechanical impacts, including when working in conditions of high temperatures – highest quality leather and finish A+ – full pile inner coating – reinforced seams – used when working with cables, ropes, construction, smelting metal in the steel industry Materials: high quality calf split leather Manufacturer: SUMMITECH Professional GOST R 12.4.246-2008; EN 388
– to perform plumbing, installation, repair, construction or loading and unloading outdoors in spring and autumn, either in industrial premises – protect from high temperatures, hot surfaces and sparks and molten metal splash – high operational indicators Material: OP cloth, PL760 g/m2 Dimensions: 2 GOST 12.4.010-75  
Recommended when working in extremely low temperatures in various industries: construction, petrochemicals, energy, transport, installation work, warehouse work, agriculture. PVC remains flexible at low temperatures resistant to oils and hydrocarbons. Knitted cuff prevent the ingress of wind into the gloves. Sand the surface provides a secure grip. Material: Material/insulation: acrylic fur Treatment:  PVC Working surface:  sandy Design:  knitted cuffs Length: 290 mm Dimensions:  L, XL TR CU 019/2011  
– to perform plumbing, installation, repair, construction or loading and unloading outdoors in spring and autumn, either in industrial premises – protect from high temperatures, hot surfaces and sparks and molten metal splash – high operational indicators Material: OP cloth, PL760 g/m2 Dimensions: 2 GOST 12.4.010-75
Designed to protect your hands against mechanical impact, sparks and splashes molten metal, elevated temperatures.  Used for welding in various industries. TR CU 019/2011 Material:  cattle split leather Insulation: faux fur Length:  360 mm The thickness of the split leather: not less than 1.1 - 1.3 mm Size: 10 Color leggings, yellow, red color lining        Description: Seams are sewn with Kevlar thread® On the big toe from the backside and from the side palm the extra pad from Spilka Seams seaming details made with a protective layer of split leather, the sewing on the seams pads made dougalli
– spot polymer coating – The 7.5-knitting class Fabric: 5-string Weight: 60 g Dimensions: 22-24 TR CU 019/2011
- excellent comfort of the textile basis - good ventilation of the hands - secure holding objects in the hand Material: knitted seamless basis, non-slip coating of natural latex on palm and fingers Length: 240-265 mm GOST R 12.4.246-2008
– spot polymer coating – 10-knitting class Weight: 45 g Dimensions: 22-24 TR CU 019/2011
Scope: •    Pharmaceuticals •    General works •    Maintenance •    Printing industry Features: •    100% natural rubber for optimum sensitivity and durability. •    High resistance to chemical agents water-based •    Long cuff for extra protection •    Certified on demand TR CU 019/2011 The coating material is fully covered with natural rubber Lining material – spraying Work surface – zigzag Cuff – direct Thickness, mm – 0,40 +to -0.05 Length - 330 mm, +-10 Color – yellow Size – 7, 7½, 8, 8½, 9-9½ and 10-10½  
Designed for protection against mechanical influences. Spongy latex coating palm and fingers provides excellent grip with the surfaces. Application:  Construction, warehouse, installation, agricultural work, work with glass, metal profile, laminate, work, General purpose. Material: Base material:  cotton/ polyester The material of the cover:  natural latex Length: 240 mm Dimensions:  S, M, L, XL TR CU 019/2011  
For protection from the cold and mechanical damage – for protection from the cold and mechanical damage – the cuff of the facial skin with a water repellent finish – lining throughout the glove – wrist strapped elastic band Materials: top: skin lining: fleece Skin thickness: 0.9/1.1 mm Length 250 mm Manufacturer: Honeywell (SPERIAN Protection) GOST 12.4.010-75; GOST 12.4.246-2008 GOST 29122-91; GOST 12.4.183-91
Nylon gloves, coated with latex on the working surface. Applications:  -    Sorting and packing of small parts -    Assembly and fitting of small mechanisms -    Work on the Assembly of electronic components -    Construction work  -   Work with Kartontara  -   Material handling Working surface: spongy Cuffs: knit, closed Color: blue Length: 220 mm Size/color rims on the wrist: 7/yellow 8/green 9/white 10/blue EN 388 2121  
Comfort and reliable retention of heavy, rough or slippery objects in highly aggressive fluid – good thermal insulation – high resistance to wear – anatomical shape – no silicone guaranteed – comply with FDA regulations for food contact Applications: fishing Color: orange Material: natural latex inner coating: textile external coating: the improved gripping surface Length: 320 mm Thickness: 1.35 mm Dimensions: 6, 7, 8, 9, 10 GOST 20010-93
Scope: •    Chemical treatment •    Maintenance and degreasing •    Building cars •    Manufacture of metal structures •    Agriculture and horticulture Features: •    Special coating of nitrile rubber protects from serious chemical and mechanical resistance •    Resistant to a broad range of solvents, oils, greases and hydrocarbon derivatives •    100% cotton lining •    Repeat the shape of the hand •    Provide a secure grip •    Certified on demand TR CU 019/2011 The coating material is fully coated in nitrile rubber Lining material – cotton lining Work surface – granulated Cuff – carved Thickness, mm – no data Length – 300/350 mm, +-10 Color – blue Size – M, L, XL
Gloves made of high-strength fabric, coated with polyurethane Applications:               - Work with sheet metal and glass    - Automotive, mechanical    - Metallurgy    Paper industry    - Production of ceramics    - The removal and disposal of waste Color: grey Working surface: smooth Cuffs: knit, closed Size/color rims on the wrist: 7/green, 8/brown, 9/yellow, 10/grey The level of protection from cuts: 4 EN 388 4442
– protect against abrasion and mechanical damage Materials: cotton the fabric square.260g/m2 with PVC coating Dimensions: 2 GOST 12.4.010-75
Optimum protection for handling heavy or sharp objects in oily environments- comfortable anatomically shaped gloves- resistance to greasy dirt- high thermal insulation of the handApplications: machinery, parts, metal working, steel cuttingMaterial: knitted seamless basis based on fiberExternal coating: leather palm with reinforcement on thumb and index fingerLength: 23-26 cmColor: greyDimensions: 7,8,9,10,11
- extended life - anatomical shape - ergonomic design reduces hand fatigue - the ideal thickness enables to maintain a high level of tactile sensitivity Material: polyurethane Length: 220-260 mm GOST R 12.4.246-2008
Gloves of natural rubber on a fabric basis. Applications:      -   Construction -    Carpentry works -    Commissioning work -    Production and processing of metal -    Grinding and fettling -    Spot welding -    Assembly and disassembly mechanisms Working surface: spongy Cuffs: carved Color: orange Length: 300 mm Size: 7, 8, 9, 10, 11 EN 388 3241; EN 374-2; EN 374-3 AKL
– to perform work outdoors in the cold season Materials: main: diagonal dyed insulation: batting lining: calico the handheld: tarpaulin Dimensions: 2 GOST 12.4.010-75
– wave-like polymer coating – The 7.5-knitting class Fabric: 4-strand Weight: 53 g Dimensions: 22-24 TR CU 019/2011
– with spillway the reinforcing pad on the palm, a protective legging and cotton lining – protects the hands from damage and abrasive loads Material: leather split leather The thickness of the split leather: 1,2 of 1.4 mm Dimensions: 10 GOST 12.4.010-75
Cotton fabric(Jersey) is partly covered with nitrile rubber. Applications:  -    Construction -    Carpentry works -    Commissioning work -    Production and processing of metal -    Grinding and fettling -    Spot welding -    Assembly and disassembly mechanisms Working surface: smooth Cuffs: legging Color: dark blue Length: 250 mm Size: 8, 9, 10, 11 EN 388 3111
Gloves of natural rubber on a fabric basis. Applications:  -    Construction -    Carpentry works -    Commissioning work -    Production and processing of metal -    Grinding and fettling -    Spot welding -    Food defense Working surface: engraved Cuffs: carved Color: blue Size: S, M, L , XL EN 388 4131; EN 374-3
– for protection against mechanical damage – resistant to high temperatures and mechanical stress, abrasion The thickness of the split leather: 0.9-1.1 mm GOST 17535-75
– for protection against mechanical damage – resistant to high temperatures and mechanical stress, abrasion The thickness of the split leather: 0.9-1.1 mm GOST 17535-75
Specifications: Specifications: Material (Fabric) pile fabric with lamination STORMPROOF Insulation Thinsulate Lining Odor-X™ anti-microbial lining Weight (kg) 0,18 Composition 100% polyester Product information: Warm winter gloves. Materials: pile fabric with lamination STORMPROOF, between fingers elastic spandex, insulation Thinsulate™ 40 g lining Odor-X™ anti-microbial lining (antibacterial coating). Reinforcement on palm and fingers. Additional inserts three fingers from EVA. Strap with Velcro for fixing. Extra long cuff for additional protection from the wind and snow. Licensed camouflage colouring.
Material: genuine leather, nylon Lightweight gloves for working with rope These lightweight gloves are very durable, perfectly sit on a hand and do not restrict movement of the fingers. Double layer of leather protects the palm and fingers. The upper part of the gloves are made of breathable, stretchy nylon Ergonomically designed Made from high quality genuine leather The palm, fingers, and other parts of the glove, which account for a large load, reinforced with a second layer of skin The upper part of the gloves are made of breathable, stretchy nylon Cuffs made of thin neoprene with Velcro closure (Velcro) Reinforced at the edges of the hole in the cuff for fastening the glove carabiner to the gazebo
//forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Material density - 240 g/m2 Weight: 180 g REVIEWS: About the material: pdf (2.1 MB)
Material: //forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® High Loft™ - Extreme Warmth w/Stretch - "shaggy", with a long NAP Material density of 270 g/m2 //forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Weight: 290 g
//forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Material density - 240 g/m2 Weight: 180 g REVIEWS: About the material: pdf (2.1 MB)
//forma-odezhda.EN/index.php?route=product/tag&tags=polartec" title="Material Polartec">Polartec® Power Stretch® Pro™ Technical Bi-component Group: Nylon/Poly Velour - Solid Material density - 240 g/m2 Weight: 180 g REVIEWS: About the material: pdf (2.1 MB)
Ask a question
Sale