Products from a-tacs category

111 products, 26 reviews, 15 videos
Compare (0)
Sorting:
Number:
Height
Size
Бренд
Color
The type of camouflage
Type headdress
Type of equipment
System
Material
The type of clothing
The backpack
Office
Backpack style
Sex
Time of year
Appointment
Утеплитель/подкладка
Цена
Summer suit consists of a jacket and trousers. The jacket is straight cut. Stand – up collar, adjustable volume, patoi on a textile fastener. Front zip closure detachable strap closed textile fasteners. Two chest patch pockets with flaps on textile fasteners. The pockets are tilted, the hands. Back with two vertical pleats for freedom of movement in the shoulder blade area. Sleeves single seam. At the top of the sleeve overhead volume pockets with valves for textile fastener, with belt loops ribbon belt from the inner side of the valves. In the elbow pads-amplifiers with input protectors on textile fasteners. At the bottom of the sleeves – pockets for pens. On bottom of sleeves cuffs with stalemates on textile fastener to adjust the volume. Pants straight cut. Tselnokrajnie waistband with seven belt loops under the belt. Volume the waistband is adjustable with cord and stoppers. Button closure. Scoring two side pockets. On the side seams two large patch pockets with three pleats for volume. The upper part is contracted pockets elastic cord with lock. The entrances to pockets, are decorated downhill, hike the hands, closed valves for textile fastener. The knee pads-amplifiers with input protectors on textile fasteners. At the bottom of the trousers overhead volume pockets with valves for textile fastener. The volume on the bottom of the trousers is adjustable braid. On the rear halves of the pants two back pockets with flaps with hidden button closure.In the area of seat trim amplifier Fabric: Mirage-210, PE-67%, CL-33%
The suit includes pants and. straight silhouette with Central concealed side zip on 5 loops and 5 buttons"Canada" and the top and bottom through a loop and button. Before severgnini overhead obyasneniyami with flaps,fastened with the Velcro fastener. At the bottom of a stitched belt. The practical design features. At the bottom of the back above knee black belt . The belt is adjustable in the back sirinapa with the help of satanika and semirings. Set-in sleeves double-seam smangele, with reinforcing pads with tucks at the elbow and the inlet on the bottom edge, fastened with the Velcro fastener.Optionally, elbow pads inserted additional padding.On the sleeves five pockets with a side entrance. On bottom of sleeves stalemates curly shape, cap with cuffs, fastened with a loop and two "Canada". Gussets for ventilation made from knitted fabric (mesh). The seams connecting the sleeves with the armhole at the shoulder vacany with the trim ring, snap-on button "NATO". Set turn-down collar with a stitched stand, with patau on the left end of the collar, fastened with a loop and two (working and non-working position). The upper inner part of the closed closure. The left side of the lining is a pocket for documents of vodonepronitsaema fabric, fastened with a button. with a stitched belt, fastened with sewn loop and button and Trouser hook, with five belt loops: on pridniprovska two and three on the hind halves. The lateral portion of the belt tight elastic band. The codpiece of trousers with a zipper closure. Under the lower edge of the belt loops on the right half of pants TACAN holder with the semicircle.The front halves of trousers with soft pleats, side pockets with decorative inserts. In the knee nastrochennogo gusset plate with tucks.The side seams are located on the overhead volume pockets with flaps. Valves pockets fastened with the Velcro fastener. Over bulky pockets on the front halves scribbled small volume pockets with valves for textile fastener. On the back of polovynchyk are flap pockets on a textile fastener. Overlay-amplifier in the seat part forms a burlap pockets.In the hemming bottom of pants for walking the seam vacany of stripti to fix the trousers to boots.In addition to the turnup of the inserted bottom twill tape for width adjustment. Fabric: Mirage-210, PE-67%, CL-33%
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Tactical shirt MPA-12 is designed to be worn with body armor in hot weather. The combination of nylon and cotton that provide maximum comfort, eliminating the formation of wrinkles, and unrestricted freedom of movement. FEATURES FOR HOT WEATHER FOR HEAVY LOADS MATERIALS NYLON 65% POLYETHYLENE, 35% COTTON
Jumpers MPA-11 used alone or as an extra warming layer, depending on weather conditions and tasks. Perfectly wicks moisture away from the body, does not restrict movement. FEATURES SHARE CUT PROTECTION FROM THE COLD MATERIALS 65% POLYETHYLENE, 35% COTTON FLEECE
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Pants MPA-28: - 2 side patch pockets with flaps with Velcro closure; - lateral portions of the belt strapped with an elastic band; - at the bottom of the side seams - "lightning"; - perforated elastic band for attachment to shoes. The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
This suit is designed to protect from rain at minimal cost and maximum comfort. The product is made of membrane fabric with Teflon coating. These materials allow the suit to effectively repel moisture and do not miss the wind. Details: Hood with visor folds into the collar-pocket. All zippers are waterproof. Each sleeve has platforms on Velcro for patch. Underarms placed vent holes with mesh that prevents the inner t-shirt from abrasion on the zipper. The cuffs on the sleeves regulated with snap closure Velcro for better protection from wind and moisture. On the back is roomy pocket with two zips and the mesh. At the bottom of the jacket is elastic cord with locking mechanism for width adjustment. Pants have belt loops, side vents and slits in side seams and zipper.
The jacket is from U.S. army field ACU form. Discontinued, replaced by the ACU Jacket-M Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Attention! For jacket colors digital flora you can buy a kit yourself sew a shoulder strap Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 46/176 R-R – 546 g 50/176 R-R – 607 g 54/182 R-R – 758 g 58/188 R-R – 823 g YOU MAY BE INTERESTED IN:
Summer suit. Consists of shirt shirt View all products by tag shirt and trousers. Shirt Shirt kind of easy shoulder wear. As a rule, the word shirt, currently, it is accepted to name clothes for boys and men, also called the upper chemise or men's shirt. The history of the... Learn about Shirt from the Encyclopedia a straight cut. Turn-down collar Front zip detachable zip. On the shoulder line the shoulder straps shoulder straps View all products by tag shoulder boards with removable stalemates (fullpagename) With back yoke. Two chest patch pockets with flaps on the buttons. Two side slash pockets with leaflets. At the bottom of the jacket jacket View all products by tag jacket the cutting zone, the volume of which is adjustable by side panels with elastic braid. Sleeves double-seam, short. On bottom of sleeves cuffs with flap button closure. Pants Pants (niderl. broek), or Pants (the Kyrghyz. Istan) the subject of outerwear covering the lower body, including each leg separately, covering the knees. In the classic version of pants on the bottom... Learn about Pants from the Encyclopedia a straight cut. Detachable belt with five belt loops under the belt. Volume the waistband is adjustable by side panels with elastic braid. Zip. Two side slit pockets.On the right rear half placket button closure. The arrow on the front halves of trousers stitched. Fabric: "Panacea" Composition: 67% polyester, 33% viscose viscose (Viscose) – the first man-made fabric, which was received by the person. Viscose (in Latin "viscosus" means "viscous") is an artificial fiber that is produced by... To learn more about Viscose from Encyclopedia 155 g/m2
Fabric: Membrane jackets Composition of raw materials of the fabric : Layer 1: 92%polyester, 8% spandex vodohranilische with Teflon impregnation. 2 layer: membrane 10000WRP/5000MVP. 3 layer: the mesh is 100% nylon. Insulation: "Fibersit" 150 g/m2 . Color: Python-Scala Description: The costume consists of a jacket and trousers,with external water-repellent layer of fabric on the membrane,with insulation Fibersit. Jacket: -long,non-removable hood,removable insulating jacket. -Front zip detachable two-way "zipper"; -hood:with a removable visor,adjustable along the face cut; -upper front and side pockets with vertical entrance, "lightning"; -lining is a removable jacket for another layer of insulation Fibersit. Pants: -removable insulated spacer,insulated with a wide belt and shoulder system for discharge of elastic tapes; -the front halves of trousers with pockets and the vents on "lightning"; -the knee pads-amplifiers; bottom side seam zipper; -inside bottom hem of pants with knitted cuffs wristlets.
The backpack is equipped with 4 external pockets. The harness consists of a padded shoulder straps of adjustable length, made of a material with a ventilated mesh structure. The shoulder covers comfortek provided for damping vertical oscillations. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 30 liters MATERIALS OXFORD 600 TEX
Durable and elastic, warm and comfortable pants anatomical cut designed to maintain a comfortable body temperature in the cold season during active physical exertion, in bad weather, with the wind and rain. Characteristics For heavy loads Protection against rain and wind For outdoor activities protection from the cold
The product has one main division is divided into three compartments by two partitions. Partitions are assembled with the help of lightning. If necessary they can be removed by undoing the zip and folding up the bottom. Materials Cordura
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
The backpack has one main volume and one small departments with zipper. Soft backrest made of breathable mesh and form a gap facilitating air circulation between back and backpack. There is a system of smashbros. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 40 liters MATERIALS OXFORD 600 TEX
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 60 litres MATERIALS OXFORD 600 TEX
A modernized version of the jacket from the U.S. army field ACU form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Removed unnecessary square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro. As in the original kit ACU the number and size of these candies reduced for ease of operation and reducing the number of rubbing elements. The mutual arrangement of reciprocal Velcro has been changed to protect the clothing under the jacket from damage (in the original with an unbuttoned jacket Velcro hook looking in the direction of the body) Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro Most of the Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes. In the original most of the Velcro only sewn in one pass around the perimeter The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance on the left forearm is not closing flat pocket for three pens the set includes removable shoulder straps, fanspage and buttons for fastening. Sutured independently flat chest pockets, and angled, are fastened by a narrow strap. To protect hands and gloves from scratches in your pocket used Velcro tape-hook, and on the flap – Velcro-loop (in original jacket ACU Vice versa). The dimensions and the angle of the pockets are changed and meet the latest generation of the original American set of ACU Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
The jacket is from U.S. army field ACU form Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. YOU MAY BE INTERESTED IN:
A modernized version of the jacket from the U.S. army field ACU form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Removed unnecessary square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro. As in the original kit ACU the number and size of these candies reduced for ease of operation and reducing the number of rubbing elements. The mutual arrangement of reciprocal Velcro has been changed to protect the clothing under the jacket from damage (in the original with an unbuttoned jacket Velcro hook looking in the direction of the body) Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro Most of the Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes. In the original most of the Velcro only sewn in one pass around the perimeter The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance on the left forearm is not closing flat pocket for three pens the set includes removable shoulder straps, fanspage and buttons for fastening. Sutured independently flat chest pockets, and angled, are fastened by a narrow strap. To protect hands and gloves from scratches in your pocket used Velcro tape-hook, and on the flap – Velcro-loop (in original jacket ACU Vice versa). The dimensions and the angle of the pockets are changed and meet the latest generation of the original American set of ACU Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 50/176 R-R – 706 g 54/182 R-R – 781 g 58/188 R-R – 867 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
A modernized version of trousers from the us army ACU field form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes New wide belt loops under his belt for convenience and reliability. Increased the height of the belt loops for a wider belt (to 60 mm) The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve The belt fastens on the button Zip fly with button closure. Piece design as the originals, unlike the old version of Alloy The bottom of the pants is pulled thin sewn braid All the Velcro sewn on to secure not only the perimeter, but also on diagonals (original – simple stitching around the perimeter). Loaded hand stitched in two or three passes The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: side inset pockets and rear button pockets made in a new way- the tissue sections on the edges of the pockets hidden under the seam is overlock in the original, which increases durability and reduces chafing of the skin side cargo pockets large volume. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism. Fastened by buttons instead of Velcro, as in the latest generation of the original ACU set. Three buttons, two standard and one extra rear, it is necessary to fasten the valve with strong otagowane entry, K. standard button is shifted to the center of the pocket relative to the response hinges on the valve, and opposite extreme is the third loop closure. The height of the valve is increased the side cargo pockets added internal organization in the form of a simple flat pockets from the main fabric for small items. On the right leg three narrow pocket on the left side are two wide pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees have been specifically adapted for use with inserts-knee pads with D3O or anatomical polyethylene foam inserts (not included!). This increased height boosts, and the altered form two seams which serve to center the protective inserts. Substantially increased reliability of retention of the pads inside the lining by the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog) the crotch is reinforced to protect from tearing, as on the original ACU pants last sample – added extra fabric in the seam and two new tie the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material:Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customer Small utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
A modernized version of trousers from the us army ACU field form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes New wide belt loops under his belt for convenience and reliability. Increased the height of the belt loops for a wider belt (to 60 mm) The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve The belt fastens on the button Zip fly with button closure. Piece design as the originals, unlike the old version of Alloy The bottom of the pants is pulled thin sewn braid All the Velcro sewn on to secure not only the perimeter, but also on diagonals (original – simple stitching around the perimeter). Loaded hand stitched in two or three passes The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: side inset pockets and rear button pockets made in a new way- the tissue sections on the edges of the pockets hidden under the seam is overlock in the original, which increases durability and reduces chafing of the skin side cargo pockets large volume. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism. Fastened by buttons instead of Velcro, as in the latest generation of the original ACU set. Three buttons, two standard and one extra rear, it is necessary to fasten the valve with strong otagowane entry, K. standard button is shifted to the center of the pocket relative to the response hinges on the valve, and opposite extreme is the third loop closure. The height of the valve is increased the side cargo pockets added internal organization in the form of a simple flat pockets from the main fabric for small items. On the right leg three narrow pocket on the left side are two wide pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees have been specifically adapted for use with inserts-knee pads with D3O or anatomical polyethylene foam inserts (not included!). This increased height boosts, and the altered form two seams which serve to center the protective inserts. Substantially increased reliability of retention of the pads inside the lining by the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog) the crotch is reinforced to protect from tearing, as on the original ACU pants last sample – added extra fabric in the seam and two new tie The area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
A modernized version of the jacket from the U.S. army field ACU form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Removed unnecessary square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro. As in the original kit ACU the number and size of these candies reduced for ease of operation and reducing the number of rubbing elements. The mutual arrangement of reciprocal Velcro has been changed to protect the clothing under the jacket from damage (in the original with an unbuttoned jacket Velcro hook looking in the direction of the body) Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro Most of the Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes. In the original most of the Velcro only sewn in one pass around the perimeter The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance on the left forearm is not closing flat pocket for three pens the set includes removable shoulder straps, fanspage and buttons for fastening. Sutured independently flat chest pockets, and angled, are fastened by a narrow strap. To protect hands and gloves from scratches in your pocket used Velcro tape-hook, and on the flap – Velcro-loop (in original jacket ACU Vice versa). The dimensions and the angle of the pockets are changed and meet the latest generation of the original American set of ACU Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
The jacket is from U.S. army field ACU form. Discontinued, replaced by the ACU Jacket-M Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 46/176 R-R – 546 g 50/176 R-R – 607 g 54/182 R-R – 758 g 58/188 R-R – 823 g YOU MAY BE INTERESTED IN:
A modernized version of the jacket from the U.S. army field ACU form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Removed unnecessary square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro. As in the original kit ACU the number and size of these candies reduced for ease of operation and reducing the number of rubbing elements. The mutual arrangement of reciprocal Velcro has been changed to protect the clothing under the jacket from damage (in the original with an unbuttoned jacket Velcro hook looking in the direction of the body) Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro Most of the Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes. In the original most of the Velcro only sewn in one pass around the perimeter The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance on the left forearm is not closing flat pocket for three pens the set includes removable shoulder straps, fanspage and buttons for fastening. Sutured independently flat chest pockets, and angled, are fastened by a narrow strap. To protect hands and gloves from scratches in your pocket used Velcro tape-hook, and on the flap – Velcro-loop (in original jacket ACU Vice versa). The dimensions and the angle of the pockets are changed and meet the latest generation of the original American set of ACU Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 50/176 R-R – 706 g 54/182 R-R – 781 g 58/188 R-R – 867 g REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism Armani on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
The jacket is from U.S. army field ACU form. Discontinued, replaced by the ACU Jacket-M Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 46/176 R-R – 546 g 50/176 R-R – 607 g 54/182 R-R – 758 g 58/188 R-R – 823 g YOU MAY BE INTERESTED IN:
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism Armani on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Sample cap of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
The manufacturer's website: www.propper.com/
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 205 g Size: 24×16×8 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerUtilitarian pouch with zipper, vertically oriented. The numbers in the title (4×4) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium and large backpacks Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need four cells wide and two to four horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. hand enters from the side The outer surface is sheathed cells PALS for mounting additional pouches, 4 cells wide and 4 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62
The jacket is from U.S. army field ACU form. Discontinued, replaced by the ACU Jacket-M Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Attention! For jacket colors digital flora you can buy a kit yourself sew a shoulder strap Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 46/176 R-R – 546 g 50/176 R-R – 607 g 54/182 R-R – 758 g 58/188 R-R – 823 g YOU MAY BE INTERESTED IN:
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
The jacket is from U.S. army field ACU form Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. YOU MAY BE INTERESTED IN:
A modernized version of trousers from the us army ACU field form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes New wide belt loops under his belt for convenience and reliability. Increased the height of the belt loops for a wider belt (to 60 mm) The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve The belt fastens on the button Zip fly with button closure. Piece design as the originals, unlike the old version of Alloy The bottom of the pants is pulled thin sewn braid All the Velcro sewn on to secure not only the perimeter, but also on diagonals (original – simple stitching around the perimeter). Loaded hand stitched in two or three passes The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: side inset pockets and rear button pockets made in a new way- the tissue sections on the edges of the pockets hidden under the seam is overlock in the original, which increases durability and reduces chafing of the skin side cargo pockets large volume. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism. Fastened by buttons instead of Velcro, as in the latest generation of the original ACU set. Three buttons, two standard and one extra rear, it is necessary to fasten the valve with strong otagowane entry, K. standard button is shifted to the center of the pocket relative to the response hinges on the valve, and opposite extreme is the third loop closure. The height of the valve is increased the side cargo pockets added internal organization in the form of a simple flat pockets from the main fabric for small items. On the right leg three narrow pocket on the left side are two wide pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees have been specifically adapted for use with inserts-knee pads with D3O or anatomical polyethylene foam inserts (not included!). This increased height boosts, and the altered form two seams which serve to center the protective inserts. Substantially increased reliability of retention of the pads inside the lining by the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog) the crotch is reinforced to protect from tearing, as on the original ACU pants last sample – added extra fabric in the seam and two new tie the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Sample cap of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
A modernized version of the jacket from the U.S. army field ACU form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Removed unnecessary square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro. As in the original kit ACU the number and size of these candies reduced for ease of operation and reducing the number of rubbing elements. The mutual arrangement of reciprocal Velcro has been changed to protect the clothing under the jacket from damage (in the original with an unbuttoned jacket Velcro hook looking in the direction of the body) Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro Most of the Velcro sewn to secure not only the perimeter, but also on diagonals or a seam in the middle. Loaded with all the Velcro sewn in two or three passes. In the original most of the Velcro only sewn in one pass around the perimeter The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage included are two plugs for the big Velcro sleeve pockets – the mating Velcro lined main fabric of the costume. The cap closes with Velcro, one large area, which stands out against the fabric, especially in kamuflirovannaya performance on the left forearm is not closing flat pocket for three pens the set includes removable shoulder straps, fanspage and buttons for fastening. Sutured independently flat chest pockets, and angled, are fastened by a narrow strap. To protect hands and gloves from scratches in your pocket used Velcro tape-hook, and on the flap – Velcro-loop (in original jacket ACU Vice versa). The dimensions and the angle of the pockets are changed and meet the latest generation of the original American set of ACU Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
The manufacturer's website: www.propper.com/
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) indicate how many spaces PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. hand enters from the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
Improved version of Panama (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Around the perimeter of the crown stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Sample cap of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
A modernized version of trousers from the us army ACU field form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes New wide belt loops under his belt for convenience and reliability. Increased the height of the belt loops for a wider belt (to 60 mm) The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve The belt fastens on the button Zip fly with button closure. Piece design as the originals, unlike the old version of Alloy The bottom of the pants is pulled thin sewn braid All the Velcro sewn on to secure not only the perimeter, but also on diagonals (original – simple stitching around the perimeter). Loaded hand stitched in two or three passes The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: side inset pockets and rear button pockets made in a new way- the tissue sections on the edges of the pockets hidden under the seam is overlock in the original, which increases durability and reduces chafing of the skin side cargo pockets large volume. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism. Fastened by buttons instead of Velcro, as in the latest generation of the original ACU set. Three buttons, two standard and one extra rear, it is necessary to fasten the valve with strong otagowane entry, K. standard button is shifted to the center of the pocket relative to the response hinges on the valve, and opposite extreme is the third loop closure. The height of the valve is increased the side cargo pockets added internal organization in the form of a simple flat pockets from the main fabric for small items. On the right leg three narrow pocket on the left side are two wide pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees have been specifically adapted for use with inserts-knee pads with D3O or anatomical polyethylene foam inserts (not included!). This increased height boosts, and the altered form two seams which serve to center the protective inserts. Substantially increased reliability of retention of the pads inside the lining by the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog) the crotch is reinforced to protect from tearing, as on the original ACU pants last sample – added extra fabric in the seam and two new tie the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size
Improved version of Panama (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Around the perimeter of the crown stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
A modernized version of trousers from the us army ACU field form. Modernization refers to the changes in the cut of the latest generation of the original American form, and its own development. We fixed some minor bugs General costume from ACU Alloy (missing lines, the position of the pockets, dimensions and so onD.). Attention! Suit ACU-M ACU replaces from Alloy, and is no longer a replica of the original American set ACU, K. has a number of subtle design changes New wide belt loops under his belt for convenience and reliability. Increased the height of the belt loops for a wider belt (to 60 mm) The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve The belt fastens on the button Zip fly with button closure. Piece design as the originals, unlike the old version of Alloy The bottom of the pants is pulled thin sewn braid All the Velcro sewn on to secure not only the perimeter, but also on diagonals (original – simple stitching around the perimeter). Loaded hand stitched in two or three passes The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: side inset pockets and rear button pockets made in a new way- the tissue sections on the edges of the pockets hidden under the seam is overlock in the original, which increases durability and reduces chafing of the skin side cargo pockets large volume. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism. Fastened by buttons instead of Velcro, as in the latest generation of the original ACU set. Three buttons, two standard and one extra rear, it is necessary to fasten the valve with strong otagowane entry, K. standard button is shifted to the center of the pocket relative to the response hinges on the valve, and opposite extreme is the third loop closure. The height of the valve is increased the side cargo pockets added internal organization in the form of a simple flat pockets from the main fabric for small items. On the right leg three narrow pocket on the left side are two wide pockets on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees have been specifically adapted for use with inserts-knee pads with D3O or anatomical polyethylene foam inserts (not included!). This increased height boosts, and the altered form two seams which serve to center the protective inserts. Substantially increased reliability of retention of the pads inside the lining by the use of a wider Velcro to fasten and a special hidden pocket in which rests the lower edge of the knee pad. Pocket does not give the edge of slipping down the knee to "break" the Velcro (see the photo in the catalog) the crotch is reinforced to protect from tearing, as on the original ACU pants last sample – added extra fabric in the seam and two new tie The area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE: Download Dimensional grid (.xlsx) to accurately determine the correct size YOU MAY BE INTERESTED IN:
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
Ultra-light winter jacket MPA-47 or "7th layer" from Magellan, designed for a comfortable stay outdoors in cold and windy weather. The advantage of this jacket is its compactness and excellent heat insulation. FEATURES Protection against cold For outdoor activities MATERIALS Rip-stop Insulation "Fibersit light"
Pants with insulated lining. The upper edge is fixed to the patriots for fixing PRS. On forward halves of trousers has a gusset plate in the knee. Side seams of the pants are zipper, unbutton the entire length. FEATURES Protection from the cold For heavy loads For outdoor activities MATERIALS Rip-stop Insulation "Fibersit light"
The manufacturer's website: www.propper.com/
Lines: 100% nylon Thread: Liberty® (the Netherlands) filament nylon bonded Material: Cordura® 500d (100% nylon) Oxford 210d (100% nylon) Lightning: SBS® Cord: The 550 paracord Atwood Rope MFG., 100% nylon (USA) Weight: 150 g Size: 19,5×12,5×7 cm * The manufacturer reserves the right to make changes in design, materials and configuration of the products without prior notice to the customerSmall utility pouch with a zipper, oriented vertically. The numbers in the title (3×3) denote the number of cells in the PALS in the width and height of the pouch is fastened, the same number of cells stitched on the outside. This pouch is ideal as a utilitarian Luggage on the sides and back unloading systems, as well as a side for medium to small backpacks. Easy to carry jar TR M-500 Mount: The UniClick system of the third generation. Two built-in clips. For mounting on a classical system PALS/MOLLE need three cells wide and two to three horizontal rows of cells in height Large two-way zipper (type 10) for reliability and faster operation, sewn with double stitching outside, protected by narrow strips, not getting stuck in the zipper locks. Reeds are used instead of a metal loop of paracord (silent, impossible to break). On the sides of the pouch sewn loops of webbing serving as a skill to buckle zipper This pouch zipper continues far down, for convenient content access for hanging of to the sides of the unloading vests and bibs, K. the hand is in a pouch on the side The outer surface is sheathed cells PALS for mounting additional pouches, 3 boxes wide, 3 rows high. Instead of webbing tape is used, made of several layers of the main fabric (Cordura® 500d). It is not inferior to conventional webbing for strength and provides a uniform appearance of the pouch, particularly on versions of camouflage Inside at the rear tabbed large flat pocket All the tissue sections and lines edged or hidden in the seams for reliability and neat appearance At the bottom there is a grommet for water drainage. It is not install a reinforced webbing to protect from splitting REVIEWS: Review from Green7-62 Review from Green7-62 YOU MAY BE INTERESTED IN:
The costume consists of trousers. Straight cut jacket with a Central countersunk (supatoy) closure on "Canada". Stand-up collar with zipper on the button. Shelf with voluminous patch pockets (two chest, two side) with flaps, fastened with the Canada. The left side inner pocket water resistant fabric with Velcro fastener Telekrona back waist inner rocker with perforated rubber band and buttons for volume control. At the bottom of the slide with cord and clamps for volume control, the cord ends are withdrawn from the inner side and closed plates. Double-seam set-in sleeves with elbow pads and cuffs nestrashnye with stalemates curly shape fastened with "NATO". On the sleeves pockets with zipper at the side, in the joints of connection of the sleeve with the armhole at the shoulder vacany shoulder straps with slip-on shoulder straps snap button "NATO". Sleeves with vents with protective mesh in armhole. with a stitched belt, fastened with sewn loop and button, with five wide belt loops: two halves on the front and three on the hind halves. The lateral portion of the belt tight elastic band. The codpiece of trousers with a hidden button closure. The front half of the trousers with soft pleats, side pockets and overhead volume pockets with flaps with zipper on the button "Canada" in the region of the side seams. In the knee nastrochennogo gusset plate with soft pleats. Halves on rear pockets with flaps with zipper on the button "Canada". Overlay-amplifier in the seat part forms a burlap pockets. On the bottom of the trousers is inserted braid to adjust the width and stropki. Fabric: Mirage-210, PE-67%, CL-33%
The costume consists of trousers. Jacket is straight cut with a stitched hood, consisting of several parts, with side inserts of knitted fabric (mesh). The volume of the hood on the front adjustable neck cord. Central fastener with buttons "Canada" attached by braid, is to set the bar at the top of the shelves. Shelf with chest pockets with shaped button flaps on the "Canada". The entrance to the pockets is inclined. On the waist line, from the inner side nastrojka slide with cord, the ends of which are brought to a person. The volume on the bottom adjustable elastic cord with clamps. The tabs displayed in the side sections on the inner side and closed areas (pads). Combo sleeves, loose fit. In the elbow pads are amplifiers. At the bottom of the armhole ventilation inserts are made of knitted fabric (mesh). Camouflage sleeves with cuffs with a slit for the big toe on the elastic band in the wrist area. without side seams with gusset on the seam stepper. Stitched waistband with six belt loops under the belt, with hinged loops for attaching suspenders. Volume the waistband is adjustable by side panels with elastic braid. The belt and codpiece fastens with buttons. with side pockets with shaped flaps , fastened with a button "Canada". Pockets are located in the seams sewing on a lining-amplifiers in the upper part of the rear halves of trousers. On the front parts of trousers in the knee area are lining stiffeners with gusset for movement. The bottom of the pants pulled elastic tape. Fabric: "Panacea" Composition: 67% polyester, 33% 155 g/m2
The costume of the MPA 21 is a summer camouflage suit The camouflage suit does not restrict movement,person, very easy and comfortable. Used by tribalistas, military, hunters and lovers of active style of rest The costume consists of a jacket and trousers. Straight cut jacket with a stitched hood, consisting of several parts, with side inserts of knitted fabric (mesh). The volume of the hood on the front adjustable neck cord. Central fastener with buttons "Canada" attached braid. Shelf with chest pockets and side pockets volume. Pockets with scalloped flaps buttoned Canada. The entrance to the pockets is inclined. On the waist line, from the inner side nastrojka slide with elastic tape for volume control. The ends of the elastic tape secured by stitching. Combo sleeves, loose fit. In the elbow pads are amplifiers. At the bottom of the top part of the sleeve of the back side there are vent inserts made of knitted fabric (mesh). Camouflage sleeves with cuffs at the wrist area, with a hole for your thumb. Scribbled on the back 18 of the belt loops on nemelka. Pants without side seams with gusset on the seam stepper. Stitched waistband with six belt loops under the belt, with hinged loops for attaching suspenders. Volume the waistband is adjustable with elastic tape on the lateral parts. The belt and codpiece fastens with buttons. with side pockets located in the joints of the lining-amplifier and rear pockets with scalloped flaps buttoned Canada. Burlap pockets forms a trim-amp. On the front parts of trousers in the knee area are lining-amplifiers.The bottom of the pants pulled elastic tape. Fabric: "Panacea" Composition: 67% polyester, 33% 155 g/m2
Summer suit. Consists of and trousers. a straight cut. Turn-down collar Central button closure. On the shoulder line with a removable stalemates (fullpagename) With back yoke. Two chest patch pockets with flaps on the buttons. Two side slash pockets with leaflets. At the bottom of the cutting zone, the volume of which is adjustable by side panels with elastic braid. Sleeves Duchovny, short. On bottom of sleeves cuffs with flap button closure. a straight cut. Detachable belt with five belt loops under the belt. Volume the waistband is adjustable by side panels with elastic braid. Zip. Two side slit pockets.On the right rear half placket button closure. The arrow on the front halves of trousers stitched. Fabric: "Panacea" Composition: 67% polyester, 33% 155 g/m2
Summer suit MPA-08 (Peleus-2) CMB moss Panacea
Pants from U.S. army field ACU form. Discontinued, replaced by Pants ACU-M The loops wide waist belt The tightening of the belt and the cord is derived from the frayed stitches on the wrong side of the belt. The cord can optionally retrieve Belt and pants button up The bottom of the pants is pulled thin sewn braid The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Pockets: two side inset pockets two back pockets with button closure side cargo pockets large, with a sloping entrance with Velcro closure. With pleats to give a flat shape when empty, with the entrance tightening the elastic cord on the locking mechanism Armani on the calf, fastened with Velcro. Well suited for carrying STIs, easy access in a sitting position at the bottom of all outside pockets sewn loop for water drainage Gain: strengthening the knees with the possibility of installing protective foam inserts (not included!). The entrance at the bottom, fastens with narrow Velcro the area of the seat reinforced overlay rounded Material: NYCO Rip-stop, 50% cotton, 50% nylon REVIEWS: The review on the website "Russel" YOU MAY BE INTERESTED IN:
The jacket is from U.S. army field ACU form. Discontinued, replaced by the ACU Jacket-M Worn tucked in or worn outside Fitted torso. On the shoulders pleat for increased freedom of movement hands Strengthen the elbow pads of tissue with the possibility of installing them under the protective foam inserts (not included!), the narrow entrance fastens with Velcro Square Velcro in the center of the chest to accommodate the signs of the differences Front zip tractor plastic two-way zipper with the easy manners of the braid. Zipper on top strap fastens with Velcro Stand-up collar (protects the neck from chafing by the armor), Velcro fastener. Can be worn folded down Under the Velcro name tape on the chest Cuff opening with Velcro The main seam is lapped (in a castle) with a chain stitch, a variety of patterns-zigzags in the loaded places Attention! For jacket colors digital flora you can buy a kit yourself sew a shoulder strap Pockets: on the shoulders pockets, fastened by Velcro. On the outside Velcro flap for standard Chevron with a flag. With the valve removed as unnecessary the fastening elements of the IR marker. Big Velcro for attachment of insignia. Sewn loop on the bottom for water drainage on the left forearm is not closing flat pocket for three pens flat chest pockets, and angled, are fastened by a narrow strap Material: NYCO Rip-stop, 50% cotton, 50% nylon Product weight: 46/176 R-R – 546 g 50/176 R-R – 607 g 54/182 R-R – 758 g 58/188 R-R – 823 g YOU MAY BE INTERESTED IN:
Sample cap of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
On the model of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Specifications: Specifications: Material (Fabric) The blended fabric TC Insulation Thermofibre Adjustable hood Snow clutch Adjusting the width of the bottom of trousers Lower temperature - 20 Composition cotton 35%, polyester 65% Product information: Winter warm suit for hunting andShortened jacket with a tight bottom band. Warm detachable hood with adjustable volume and height. Stand-up collar is insulated Polar Fleece. Outside fourteen pockets inside and three for documents and phone. Cuff with elastic and may also be subject to closure. Two-way zipper protected by a double placket. The pants have a removable back, belt loops under a wide waist belt and convenient adjustment of the straps for growth. The bottom width of the pants is adjustable and the zipper is fixed by Velcro.   We give you warm!!!     Adjustable hood will allow you to freely wear the hat all sizes and even a helmet         High stand-up collar protects neck from wind         Pocket for walkie-talkie - always stay connected!         The clutch on the rubber band will protect the Shoe from the snow         Adjustable width press. You can tighten the trousers to the width of the feet, or Vice versa, cover top shoes         Synthetic a new generation of insulation with improved insulating properties. Lightweight, soft, particularly warm, highly breathable, does not absorb moisture         Light and soft fabric with excellent insulating properties. Its thermal properties superior to wool. The unique structure allows the material to hold air, remove moisture from the body, almost does not get wet         Fabric composition: polyester 65%, cotton 35 %. Water-repellent, breathable and does not rustle            
Improved version of Panama (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Around the perimeter of the crown stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
The manufacturer's website: www.propper.com/
The manufacturer's website: www.propper.com/
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
Improved version (Boonie Hat) used in the U.S. armed forces Hard stitched fields. Compared with the old variant Alloy main field edged with a cloth instead of a plain braid Cord with easy locking mechanism Mesh eyelets at sides for ventilation of the head Perimeter - stitched ribbon, forming cells for installation of frame elements (vegetation andp.). Unlike the American original, the ribbon is sewn is not from slings, and from the main fabric, which is especially important in versions of camouflage Panama Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors Digital flora, Shadow: Rip-stop, 100% cotton For colors ACUPAT, Multicam, Coyote brown: The material is Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47%
The manufacturer's website: www.propper.com/
Suit Soft Shell purposefully designed under the stringent requirements of operators of Special Forces. Designed to maintain a comfortable body temperature of the user in cold weather if the activity, in bad weather, with the wind and rain. The costume can be used as a base 5th Gen ECWCS layer.III. Jacket MPA-26-01: - 2 internal and 6 external pockets that you can access when worn in conjunction with tactical equipment; - ventilation holes protected by mesh; - adjustment on waist and bottom; - the collar; - adjustable, removable hood; - close the ventilation holes; - taped zippers. - space under the chevrons Velcro The Soft shell fabric breathes, it does not tear, is waterproof, does not restrict movement!
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 7 pockets hunting for different things and some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES 70 litres MATERIALS OXFORD 600 TEX
Sample cap of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
The cap consists of five wedges with straight visor with two holes for ventilation and a strap to fit to size. FEATURES PROTECTION FROM RAIN AND WIND MATERIALS SOFTSHELL
Sample cap of the U.S. Army (Patrol Cap). Option in the colors of "Digital flora" is used in the Russian armed forces since 2010 The lining from the main fabric On the sides small eyelets for ventilation of the head Hard visor Material: For colors A-TACS FG, A-TACS LE: Rip-stop, 35% cotton, 65% polyester. The fabric is manufactured in the USA under license by the firm Schott Performance Fabrics inc. For colors ACUPAT, Multicam, Coyote brown: Material NYCO Rip-stop, 50% cotton, 50% nylon For other colors: Strong rip-stop, 53% cotton, 47% polyester
All the buckles are made of polyamide plastic. The bottom of the backpack is duplicated and reinforced waterproof tarpaulin material. There are 5 pockets for different things and hunting are some of the attachment points of the attachment. FEATURES FOR OUTDOOR ACTIVITIES FOR MILITARY OPERATIONS 45 liters MATERIALS OXFORD 600 TEX
A-TACS FG Camo (camouflage)
A-TACS FG Camo (camouflage) a Line of tanks was developed by Digtal Concealment Systems DCS in 2011. Family of camouflage developed by Digtal Concealment Systems, DCS . A-TACS is designed as a universal pattern that blends into almost any environment. To date, there are two types of camouflage AU Arid Urban for the city and rocky terrain FG Foliage Green forest for while most modern planes especially digital , a family of patterns, A-TACS deprived since the development. Unnatural square pixels, for example, replaced organic pixels. In the drawings camouflage applied palette of natural colors, which are borrowed from the natural environment taking account of shadows and correct color reproduction. In camouflage A-TACS is applied the concept of pattern within a pattern small elements of the picture overlap each other and create a larger picture, with both small and large elements are independent patterns. Thus, from afar, A-TACS does not look as bright outlines of the spot, than suffer many modern disguises. According to the manufacturer, the range of compleja has 3 advantages over pixel colours 1 the transition between colors smoother and more natural by replacing square pixels with organic and some fashionable patented modern technologies 2 the color palette was much wider thanks to modern technology 3 pixels organizuyutsya in small patterns, small patterns are organized in large, and they do not have horizontal or vertical orientation, thereby better hiding the silhouette. Description of pattern A-TACS Camo Pattern Full name of the pattern, Advanced Tactical Concealment System A-TACS . This picture looks very modern and could be considered a new decision between digital camouflage for example, ACUPAT camo and Russian Figure and the classic woodland like camouflage. the result is a picture that not only breaks up the silhouette of a soldier and this is the Prime purpose of camouflage , but also knocks a tuning eye as part of drawing a clear spot, some blurry spots. This new solution, which will be checked. History of camouflage A-TACS FG Camo Camouflage FG Foliage Green launched in 2011 as a newfangled solution for military forces in the USA, the common name of all Paterno A-TACS Camo Pattern, first appeared in desert colors sand A-TACS AU Arid Urban , and later series A-TACS FG Foliage Green for average deciduous strip Zelenka and A-TACS LE Law Enforcement for the urban environment and the structures of law and order. since 1991, Tactical Performance Corp. TPC is engaged in the development and manufacture of high quality tactical equipment and apparel for law enforcement and military units around the world. made in our own factory TPC , which can easily satisfy all the needs of the customer, in any part of the world. All products TPC sewn from U.S. fabric and thoroughly tested using extensive feedback from end-users. So, with the addition of in its line of products, it can be produced with the addition of elements fabrics from 50 50 NYCO RipStop and provides options tailored to the needs of soldiers operating in warmer climates. From jackets and vests to all kinds of bags and pouches, rucksacks and cases in A-TACS made in Cordura, jackets, pants and in A-TACS from RipStop fabrics , as well as various other products that allow to combine the options convenient to each user equipment. A-TACS FG Foliage Green A-TACS FG Foliage Green Camo under the woodland. Figure organic camouflage A-TACS FG has remained the same, the changes struck only colors, camo green. How the new colors may be seen above and on other pictures, although it must be recognized that the area chosen. Description of the FG Foliage Green camouflage the Company Digital Concealment Systems has updated its official information site dedicated to camo Advanced Tactical Concealment System A-TACS . On the website there is information about the new camo A-TACS FG Foliage Green Camo under the woodland. Figure organic camouflage A-TACS FG has remained the same, the changes struck only colors, camo green. New colours it is possible to see in the photo, although it must be recognized that the area chosen. since the release of the original pattern A-TACS, people asked, his option for green areas. The simple answer would be to create a variant of an existing model and release it in the green version. Taking this approach may have been easier and faster, however, this would not be the correct way to create an effective camouflage for diverse, wooded terrain, since it is the characteristic environmental elements and shapes, more moderate contrasts required for masking. The answer was found in creating a completely new model, based on a unique pattern within a pattern A-TACS with the addition of the desired depth. In addition, you can add visual distortion, so as to further break up the human silhouette.
 
A-TACS FG Foliage Green (camouflage)
A-TACS FG Foliage Green (camouflage) Camouflage FG Foliage Green launched in 2011 as a newfangled solution for military forces in the USA, the common name of all Paterno A-TACS Camo Pattern, first appeared in desert colors sand A-TACS AU Arid Urban , and later series A-TACS FG Foliage Green for average deciduous strip Zelenka and A-TACS LE Law Enforcement for the urban environment and the structures of law and order. History of camouflage A-TACS FG Camo since 1991, Tactical Performance Corp. TPC is engaged in the development and manufacture of high quality tactical equipment and apparel for law enforcement and military units around the world. made in our own factory TPC , which can easily satisfy all the needs of the customer, in any part of the world. All products TPC sewn from U.S. fabric and thoroughly tested using extensive feedback from end-users. So, with the addition of in its line of products, it can be produced with the addition of elements fabrics from 50 50 NYCO RipStop and provides options tailored to the needs of soldiers operating in warmer climates. From jackets and vests to all kinds of bags and pouches, rucksacks and cases in A-TACS made in Cordura, jackets, pants and in A-TACS from RipStop fabrics , as well as various other products that allow to combine the options convenient to each user equipment. A-TACS FG Foliage Green Camo under the woodland. Figure organic camouflage A-TACS FG has remained the same, the changes struck only colors, camo green. How the new colors may be seen above and on other pictures, although it must be recognized that the area chosen. Description of the FG Foliage Green camouflage the Company Digital Concealment Systems has updated its official information site dedicated to camo Advanced Tactical Concealment System A-TACS . On the website there is information about the new camo A-TACS FG Foliage Green Camo under the woodland. Figure organic camouflage A-TACS FG has remained the same, the changes struck only colors, camo green. New colours it is possible to see in the photo, although it must be recognized that the area chosen. since the release of the original pattern A-TACS, people asked, his option for green areas. The simple answer would be to create a variant of an existing model and release it in the green version. Taking this approach may have been easier and faster, however, this would not be the correct way to create an effective camouflage for diverse, wooded terrain, since it is the characteristic environmental elements and shapes, more moderate contrasts required for masking. The answer was found in creating a completely new model, based on a unique pattern within a pattern A-TACS with the addition of the desired depth. In addition, you can add visual distortion, so as to further break up the human silhouette. After more than a year of development and survey of a multitude of professionals, we are proud to present FG Foliage Green Camo. The use of multiple shades of green are taken directly from various forest and transitional terrain elements combined with various shades of earth, A-TACS was designed to be effective in a wide range of forests and a temperate climate. As in the original colors A-TACS AU arid urban camo pattern, made of small spots grouped in larger and creates lots of options on certain models. Large organic shapes and strategically placed shadow elements within the pattern of the pattern help to create a unique three-dimensional help disguise. Camouflage FG Foliage Green Description of pattern A-TACS Camo Pattern Full name of the pattern, Advanced Tactical Concealment System A-TACS . This picture looks very modern and could be considered a new decision between digital camouflage for example, ACUPAT camo and Russian Figure and the classic woodland like camouflage. the result is a picture that not only breaks up the silhouette of a soldier and this is the Prime purpose of camouflage , but also knocks a tuning eye as part of drawing a clear spot, some blurry spots. This new solution, which will be checked. At the time of writing the article in 2011, the pattern and its two types - the original version in the colours of sand and an updated version for deciduous forests only just went on sale. Promotional photoshoot in plain text explains what climatic zones is the colors of camouflage. FG Foliage Green are examples of camouflage properties. src http forma-odezhda.ru image data 02 A-TACS_FG_Camo_Foliage_Green_ camouflage _09.jpg A-TACS FG Foliage Green camouflage examples of properties. FG Foliage Green are examples of camouflage properties. src http forma-odezhda.ru image data 02 A-TACS_FG_Camo_Foliage_Green_ camouflage _02.jpg A-TACS FG Foliage Green camouflage examples of properties. FG Foliage Green are examples of camouflage properties. src http forma-odezhda.ru image data 02 A-TACS_FG_Camo_Foliage_Green_
 
A comparative test of camouflage JABA, MultiCam, A TACS FG, A TACS AU
In mid-may when the vegetation is finished its active growth phase, we decided to perform a small comparative test. They chose popular today, color MultiCam, A-TACS FG Foliage Green and A-TACS AU Arid Urban , in addition to the list added a new green JABA TOAD Field . Thus, in the test participated two camouflage that focus primarily on desert sandy terrain, and two for the most part of the forest camouflage. For purity test, we chose four completely new set of field uniforms, made of identical materials and from the same manufacturer. In the test were used new sets of military uniform MABUTA MK-2 from brand P1G-Tac. This costume, as it is known, is made of a proprietary blended material Profit-On, the material consists of 65 cotton and 35 polyester. the Test was conducted in the first half of the day, that day was observed in partly cloudy weather without precipitation. In the test we tried to choose the best camera angles, lighting and background, if possible, compared camouflage colors in the same conditions. Plus, for greater objectivity rearranged camouflage in places at different distances. In their comparison test we gave the advantage of flatter terrain with dense vegetation. Chose overgrown forest areas, areas near forest trails with low vegetation and forest hill with dry grass, rotten leaves. In addition, for completeness, filmed the edge of a forest with tall grass and green young field. The shooting occurred at distances of 10 to 20 meters, in the distance was increased to 50 meters. Forest. Dense vegetation the Woods. A wide forest trail the Woods. The sandy slope Edge of the forest Young field Below is a small video showing the movement in all four colors at the same time. The video depicted blocks of the Forest. Dense vegetation , forest and Young field . The last two blocks is made in two stages, with the swap of camouflage patterns.
 
Ask a question
Sale